linux-stable.git/net/bluetooth, branch v5.1.9

Bluetooth: Ignore CC events not matching the last HCI command

2019-05-31T13:43:16+00:00

[ Upstream commit f80c5dad7b6467b884c445ffea45985793b4b2d0 ]

This commit makes the kernel not send the next queued HCI command until
a command complete arrives for the last HCI command sent to the
controller. This change avoids a problem with some buggy controllers
(seen on two SKUs of QCA9377) that send an extra command complete event
for the previous command after the kernel had already sent a new HCI
command to the controller.

The problem was reproduced when starting an active scanning procedure,
where an extra command complete event arrives for the LE_SET_RANDOM_ADDR
command. When this happends the kernel ends up not processing the
command complete for the following commmand, LE_SET_SCAN_PARAM, and
ultimately behaving as if a passive scanning procedure was being
performed, when in fact controller is performing an active scanning
procedure. This makes it impossible to discover BLE devices as no device
found events are sent to userspace.

This problem is reproducible on 100% of the attempts on the affected
controllers. The extra command complete event can be seen at timestamp
27.420131 on the btmon logs bellow.

Bluetooth monitor ver 5.50
= Note: Linux version 5.0.0+ (x86_64)                                  0.352340
= Note: Bluetooth subsystem version 2.22                               0.352343
= New Index: 80:C5:F2:8F:87:84 (Primary,USB,hci0)               [hci0] 0.352344
= Open Index: 80:C5:F2:8F:87:84                                 [hci0] 0.352345
= Index Info: 80:C5:F2:8F:87:84 (Qualcomm)                      [hci0] 0.352346
@ MGMT Open: bluetoothd (privileged) version 1.14             {0x0001} 0.352347
@ MGMT Open: btmon (privileged) version 1.14                  {0x0002} 0.352366
@ MGMT Open: btmgmt (privileged) version 1.14                {0x0003} 27.302164
@ MGMT Command: Start Discovery (0x0023) plen 1       {0x0003} [hci0] 27.302310
        Address type: 0x06
          LE Public
          LE Random
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6   #1 [hci0] 27.302496
        Address: 15:60:F2:91:B2:24 (Non-Resolvable)
> HCI Event: Command Complete (0x0e) plen 4                 #2 [hci0] 27.419117
      LE Set Random Address (0x08|0x0005) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7  #3 [hci0] 27.419244
        Type: Active (0x01)
        Interval: 11.250 msec (0x0012)
        Window: 11.250 msec (0x0012)
        Own address type: Random (0x01)
        Filter policy: Accept all advertisement (0x00)
> HCI Event: Command Complete (0x0e) plen 4                 #4 [hci0] 27.420131
      LE Set Random Address (0x08|0x0005) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2      #5 [hci0] 27.420259
        Scanning: Enabled (0x01)
        Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4                 #6 [hci0] 27.420969
      LE Set Scan Parameters (0x08|0x000b) ncmd 1
        Status: Success (0x00)
> HCI Event: Command Complete (0x0e) plen 4                 #7 [hci0] 27.421983
      LE Set Scan Enable (0x08|0x000c) ncmd 1
        Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 4        {0x0003} [hci0] 27.422059
      Start Discovery (0x0023) plen 1
        Status: Success (0x00)
        Address type: 0x06
          LE Public
          LE Random
@ MGMT Event: Discovering (0x0013) plen 2             {0x0003} [hci0] 27.422067
        Address type: 0x06
          LE Public
          LE Random
        Discovery: Enabled (0x01)
@ MGMT Event: Discovering (0x0013) plen 2             {0x0002} [hci0] 27.422067
        Address type: 0x06
          LE Public
          LE Random
        Discovery: Enabled (0x01)
@ MGMT Event: Discovering (0x0013) plen 2             {0x0001} [hci0] 27.422067
        Address type: 0x06
          LE Public
          LE Random
        Discovery: Enabled (0x01)

Signed-off-by: João Paulo Rechi Vita 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Fix not initializing L2CAP tx_credits

2019-05-11T05:49:55+00:00

commit ba8f5289f706aed94cc95b15cc5b89e22062f61f upstream.

l2cap_le_flowctl_init was reseting the tx_credits which works only for
outgoing connection since that set the tx_credits on the response, for
incoming connections that was not the case which leaves the channel
without any credits causing it to be suspended.

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Cc: stable@vger.kernel.org # 4.20+
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Align minimum encryption key size for LE and BR/EDR connections

2019-05-11T05:49:55+00:00

commit d5bb334a8e171b262e48f378bd2096c0ea458265 upstream.

The minimum encryption key size for LE connections is 56 bits and to
align LE with BR/EDR, enforce 56 bits of minimum encryption key size for
BR/EDR connections as well.

Signed-off-by: Marcel Holtmann 
Signed-off-by: Johan Hedberg 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

Bluetooth: hidp: fix buffer overflow

2019-05-11T05:49:55+00:00

commit a1616a5ac99ede5d605047a9012481ce7ff18b16 upstream.

Struct ca is copied from userspace. It is not checked whether the "name"
field is NULL terminated, which allows local users to obtain potentially
sensitive information from kernel stack memory, via a HIDPCONNADD command.

This vulnerability is similar to CVE-2011-1079.

Signed-off-by: Young Xiao 
Signed-off-by: Marcel Holtmann 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Check address length before reading address field

2019-04-12T17:25:03+00:00

KMSAN will complain if valid address length passed to bind() is shorter
than sizeof(struct sockaddr_sco) bytes.

Signed-off-by: Tetsuo Handa 
Signed-off-by: David S. Miller

Bluetooth: Add quirk for reading BD_ADDR from fwnode property

2019-02-26T09:08:26+00:00

Add HCI_QUIRK_USE_BDADDR_PROPERTY to allow controllers to retrieve
the public Bluetooth address from the firmware node property
'local-bd-address'. If quirk is set and the property does not exist
or is invalid the controller is marked as unconfigured.

Signed-off-by: Matthias Kaehlcke 
Reviewed-by: Balakrishna Godavarthi 
Tested-by: Balakrishna Godavarthi 
Signed-off-by: Marcel Holtmann

Bluetooth: mgmt: Use struct_size() helper

2019-02-26T08:46:49+00:00

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, change the following form:

sizeof(*rp) + (sizeof(rp->entry[0]) * count);

to :

struct_size(rp, entry, count)

Notice that, in this case, variable rp_len is not necessary, hence
it is removed.

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Marcel Holtmann

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

2019-02-25T06:27:19+00:00

Johan Hedberg says:

====================
Here's the main bluetooth-next pull request for the 5.1 kernel.

 - Fixes & improvements to mediatek, hci_qca, btrtl, and btmrvl HCI drivers
 - Fixes to parsing invalid L2CAP config option sizes
 - Locking fix to bt_accept_enqueue()
 - Add support for new Marvel sd8977 chipset
 - Various other smaller fixes & cleanups
====================

Signed-off-by: David S. Miller

Bluetooth: a2mp: Use struct_size() helper

2019-02-18T13:01:59+00:00

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    struct boo entry[];
};

size = sizeof(struct foo) + count * sizeof(struct boo);
instance = alloc(size, GFP_KERNEL)

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

size = struct_size(instance, entry, count);
instance = alloc(size, GFP_KERNEL)

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Marcel Holtmann

Bluetooth: hci_event: Use struct_size() helper

2019-02-18T13:00:09+00:00

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, change the following form:

sizeof(*ev) + ev->num_hndl * sizeof(struct hci_comp_pkts_info)

 to :

struct_size(ev, handles, ev->num_hndl)

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Marcel Holtmann