linux-stable.git/net/bluetooth, branch v4.4.252

Bluetooth: Fix null pointer dereference in hci_event_packet()

2020-12-29T12:42:35+00:00

[ Upstream commit 6dfccd13db2ff2b709ef60a50163925d477549aa ]

AMP_MGR is getting derefernced in hci_phy_link_complete_evt(), when called
from hci_event_packet() and there is a possibility, that hcon->amp_mgr may
not be found when accessing after initialization of hcon.

- net/bluetooth/hci_event.c:4945
The bug seems to get triggered in this line:

bredr_hcon = hcon->amp_mgr->l2cap_conn->hcon;

Fix it by adding a NULL check for the hcon->amp_mgr before checking the ev-status.

Fixes: d5e911928bd8 ("Bluetooth: AMP: Process Physical Link Complete evt")
Reported-and-tested-by: syzbot+0bef568258653cff272f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=0bef568258653cff272f
Signed-off-by: Anmol Karn 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt()

2020-12-29T12:42:34+00:00

commit f7e0e8b2f1b0a09b527885babda3e912ba820798 upstream.

`num_reports` is not being properly checked. A malformed event packet with
a large `num_reports` number makes hci_le_direct_adv_report_evt() read out
of bounds. Fix it.

Cc: stable@vger.kernel.org
Fixes: 2f010b55884e ("Bluetooth: Add support for handling LE Direct Advertising Report events")
Reported-and-tested-by: syzbot+24ebd650e20bd263ca01@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=24ebd650e20bd263ca01
Signed-off-by: Peilin Ye 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Only mark socket zapped after unlocking

2020-10-29T08:03:10+00:00

[ Upstream commit 20ae4089d0afeb24e9ceb026b996bfa55c983cc2 ]

Since l2cap_sock_teardown_cb doesn't acquire the channel lock before
setting the socket as zapped, it could potentially race with
l2cap_sock_release which frees the socket. Thus, wait until the cleanup
is complete before marking the socket as zapped.

This race was reproduced on a JBL GO speaker after the remote device
rejected L2CAP connection due to resource unavailability.

Here is a dmesg log with debug logs from a repro of this bug:
[ 3465.424086] Bluetooth: hci_core.c:hci_acldata_packet() hci0 len 16 handle 0x0003 flags 0x0002
[ 3465.424090] Bluetooth: hci_conn.c:hci_conn_enter_active_mode() hcon 00000000cfedd07d mode 0
[ 3465.424094] Bluetooth: l2cap_core.c:l2cap_recv_acldata() conn 000000007eae8952 len 16 flags 0x2
[ 3465.424098] Bluetooth: l2cap_core.c:l2cap_recv_frame() len 12, cid 0x0001
[ 3465.424102] Bluetooth: l2cap_core.c:l2cap_raw_recv() conn 000000007eae8952
[ 3465.424175] Bluetooth: l2cap_core.c:l2cap_sig_channel() code 0x03 len 8 id 0x0c
[ 3465.424180] Bluetooth: l2cap_core.c:l2cap_connect_create_rsp() dcid 0x0045 scid 0x0000 result 0x02 status 0x00
[ 3465.424189] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 4
[ 3465.424196] Bluetooth: l2cap_core.c:l2cap_chan_del() chan 000000006acf9bff, conn 000000007eae8952, err 111, state BT_CONNECT
[ 3465.424203] Bluetooth: l2cap_sock.c:l2cap_sock_teardown_cb() chan 000000006acf9bff state BT_CONNECT
[ 3465.424221] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 3
[ 3465.424226] Bluetooth: hci_core.h:hci_conn_drop() hcon 00000000cfedd07d orig refcnt 6
[ 3465.424234] BUG: spinlock bad magic on CPU#2, kworker/u17:0/159
[ 3465.425626] Bluetooth: hci_sock.c:hci_sock_sendmsg() sock 000000002bb0cb64 sk 00000000a7964053
[ 3465.430330]  lock: 0xffffff804410aac0, .magic: 00000000, .owner: /-1, .owner_cpu: 0
[ 3465.430332] Causing a watchdog bite!

Signed-off-by: Abhishek Pandit-Subedi 
Reported-by: Balakrishna Godavarthi 
Reviewed-by: Manish Mandlik 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Disconnect if E0 is used for Level 4

2020-10-17T09:03:30+00:00

commit 8746f135bb01872ff412d408ea1aa9ebd328c1f5 upstream.

E0 is not allowed with Level 4:

BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C page 1319:

  '128-bit equivalent strength for link and encryption keys
   required using FIPS approved algorithms (E0 not allowed,
   SAFER+ not allowed, and P-192 not allowed; encryption key
   not shortened'

SC enabled:

> HCI Event: Read Remote Extended Features (0x23) plen 13
        Status: Success (0x00)
        Handle: 256
        Page: 1/2
        Features: 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          Secure Simple Pairing (Host Support)
          LE Supported (Host)
          Secure Connections (Host Support)
> HCI Event: Encryption Change (0x08) plen 4
        Status: Success (0x00)
        Handle: 256
        Encryption: Enabled with AES-CCM (0x02)

SC disabled:

> HCI Event: Read Remote Extended Features (0x23) plen 13
        Status: Success (0x00)
        Handle: 256
        Page: 1/2
        Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          Secure Simple Pairing (Host Support)
          LE Supported (Host)
> HCI Event: Encryption Change (0x08) plen 4
        Status: Success (0x00)
        Handle: 256
        Encryption: Enabled with E0 (0x01)
[May 8 20:23] Bluetooth: hci0: Invalid security: expect AES but E0 was used
< HCI Command: Disconnect (0x01|0x0006) plen 3
        Handle: 256
        Reason: Authentication Failure (0x05)

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Cc: Hans-Christian Noren Egtvedt 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Consolidate encryption handling in hci_encrypt_cfm

2020-10-17T09:03:30+00:00

commit 3ca44c16b0dcc764b641ee4ac226909f5c421aa3 upstream.

This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection
state is BT_CONFIG so callers don't have to check the state.

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Cc: Hans-Christian Noren Egtvedt 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: fix kernel oops in store_pending_adv_report

2020-10-17T09:03:30+00:00

commit a2ec905d1e160a33b2e210e45ad30445ef26ce0e upstream.

Fix kernel oops observed when an ext adv data is larger than 31 bytes.

This can be reproduced by setting up an advertiser with advertisement
larger than 31 bytes.  The issue is not sensitive to the advertisement
content.  In particular, this was reproduced with an advertisement of
229 bytes filled with 'A'.  See stack trace below.

This is fixed by not catching ext_adv as legacy adv are only cached to
be able to concatenate a scanable adv with its scan response before
sending it up through mgmt.

With ext_adv, this is no longer necessary.

  general protection fault: 0000 [#1] SMP PTI
  CPU: 6 PID: 205 Comm: kworker/u17:0 Not tainted 5.4.0-37-generic #41-Ubuntu
  Hardware name: Dell Inc. XPS 15 7590/0CF6RR, BIOS 1.7.0 05/11/2020
  Workqueue: hci0 hci_rx_work [bluetooth]
  RIP: 0010:hci_bdaddr_list_lookup+0x1e/0x40 [bluetooth]
  Code: ff ff e9 26 ff ff ff 0f 1f 44 00 00 0f 1f 44 00 00 55 48 8b 07 48 89 e5 48 39 c7 75 0a eb 24 48 8b 00 48 39 f8 74 1c 44 8b 06 <44> 39 40 10 75 ef 44 0f b7 4e 04 66 44 39 48 14 75 e3 38 50 16 75
  RSP: 0018:ffffbc6a40493c70 EFLAGS: 00010286
  RAX: 4141414141414141 RBX: 000000000000001b RCX: 0000000000000000
  RDX: 0000000000000000 RSI: ffff9903e76c100f RDI: ffff9904289d4b28
  RBP: ffffbc6a40493c70 R08: 0000000093570362 R09: 0000000000000000
  R10: 0000000000000000 R11: ffff9904344eae38 R12: ffff9904289d4000
  R13: 0000000000000000 R14: 00000000ffffffa3 R15: ffff9903e76c100f
  FS: 0000000000000000(0000) GS:ffff990434580000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007feed125a000 CR3: 00000001b860a003 CR4: 00000000003606e0
  Call Trace:
    process_adv_report+0x12e/0x560 [bluetooth]
    hci_le_meta_evt+0x7b2/0xba0 [bluetooth]
    hci_event_packet+0x1c29/0x2a90 [bluetooth]
    hci_rx_work+0x19b/0x360 [bluetooth]
    process_one_work+0x1eb/0x3b0
    worker_thread+0x4d/0x400
    kthread+0x104/0x140

Fixes: c215e9397b00 ("Bluetooth: Process extended ADV report event")
Reported-by: Andy Nguyen 
Reported-by: Linus Torvalds 
Reported-by: Balakrishna Godavarthi 
Signed-off-by: Alain Michaud 
Tested-by: Sonny Sasaka 
Acked-by: Marcel Holtmann 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: MGMT: Fix not checking if BT_HS is enabled

2020-10-17T09:03:30+00:00

commit b560a208cda0297fef6ff85bbfd58a8f0a52a543 upstream.

This checks if BT_HS is enabled relecting it on MGMT_SETTING_HS instead
of always reporting it as supported.

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: A2MP: Fix not initializing all members

2020-10-17T09:03:29+00:00

commit eddb7732119d53400f48a02536a84c509692faa8 upstream.

This fixes various places where a stack variable is used uninitialized.

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Handle Inquiry Cancel error after Inquiry Complete

2020-10-01T09:11:55+00:00

[ Upstream commit adf1d6926444029396861413aba8a0f2a805742a ]

After sending Inquiry Cancel command to the controller, it is possible
that Inquiry Complete event comes before Inquiry Cancel command complete
event. In this case the Inquiry Cancel command will have status of
Command Disallowed since there is no Inquiry session to be cancelled.
This case should not be treated as error, otherwise we can reach an
inconsistent state.

Example of a btmon trace when this happened:

< HCI Command: Inquiry Cancel (0x01|0x0002) plen 0
> HCI Event: Inquiry Complete (0x01) plen 1
        Status: Success (0x00)
> HCI Event: Command Complete (0x0e) plen 4
      Inquiry Cancel (0x01|0x0002) ncmd 1
        Status: Command Disallowed (0x0c)

Signed-off-by: Sonny Sasaka 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: L2CAP: handle l2cap config request during open state

2020-10-01T09:11:53+00:00

[ Upstream commit 96298f640104e4cd9a913a6e50b0b981829b94ff ]

According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5,
the incoming L2CAP_ConfigReq should be handled during
OPEN state.

The section below shows the btmon trace when running
L2CAP/COS/CFD/BV-12-C before and after this change.

=== Before ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12                #22
      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16                #23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12                #24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5      #25
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5      #26
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16                #27
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18                #28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5      #29
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14                #30
      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20                #31
      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                ......
< ACL Data TX: Handle 256 flags 0x00 dlen 14                #32
      L2CAP: Command Reject (0x01) ident 3 len 6
        Reason: Invalid CID in request (0x0002)
        Destination CID: 64
        Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5      #33
        Num handles: 1
        Handle: 256
        Count: 1
...
=== After ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12               #22
      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16               #23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12               #24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5     #25
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5     #26
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16               #27
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18               #28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5     #29
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14               #30
      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20               #31
      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                .....
< ACL Data TX: Handle 256 flags 0x00 dlen 18               #32
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
< ACL Data TX: Handle 256 flags 0x00 dlen 12               #33
      L2CAP: Configure Request (0x04) ident 3 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5     #34
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5     #35
        Num handles: 1
        Handle: 256
        Count: 1
...

Signed-off-by: Howard Chung 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin