linux-stable.git/net/bluetooth, branch v4.14.232

Bluetooth: Fix null pointer dereference in amp_read_loc_assoc_final_data

2021-03-07T10:27:44+00:00

[ Upstream commit e8bd76ede155fd54d8c41d045dda43cd3174d506 ]

kernel panic trace looks like:

 #5 [ffffb9e08698fc80] do_page_fault at ffffffffb666e0d7
 #6 [ffffb9e08698fcb0] page_fault at ffffffffb70010fe
    [exception RIP: amp_read_loc_assoc_final_data+63]
    RIP: ffffffffc06ab54f  RSP: ffffb9e08698fd68  RFLAGS: 00010246
    RAX: 0000000000000000  RBX: ffff8c8845a5a000  RCX: 0000000000000004
    RDX: 0000000000000000  RSI: ffff8c8b9153d000  RDI: ffff8c8845a5a000
    RBP: ffffb9e08698fe40   R8: 00000000000330e0   R9: ffffffffc0675c94
    R10: ffffb9e08698fe58  R11: 0000000000000001  R12: ffff8c8b9cbf6200
    R13: 0000000000000000  R14: 0000000000000000  R15: ffff8c8b2026da0b
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffffb9e08698fda8] hci_event_packet at ffffffffc0676904 [bluetooth]
 #8 [ffffb9e08698fe50] hci_rx_work at ffffffffc06629ac [bluetooth]
 #9 [ffffb9e08698fe98] process_one_work at ffffffffb66f95e7

hcon->amp_mgr seems NULL triggered kernel panic in following line inside
function amp_read_loc_assoc_final_data

        set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state);

Fixed by checking NULL for mgr.

Signed-off-by: Gopal Tiwari 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Put HCI device if inquiry procedure interrupts

2021-03-03T17:22:38+00:00

[ Upstream commit 28a758c861ff290e39d4f1ee0aa5df0f0b9a45ee ]

Jump to the label done to decrement the reference count of HCI device
hdev on path that the Inquiry procedure is interrupted.

Fixes: 3e13fa1e1fab ("Bluetooth: Fix hci_inquiry ioctl usage")
Signed-off-by: Pan Bian 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: drop HCI device reference before return

2021-03-03T17:22:38+00:00

[ Upstream commit 5a3ef03afe7e12982dc3b978f4c5077c907f7501 ]

Call hci_dev_put() to decrement reference count of HCI device hdev if
fails to duplicate memory.

Fixes: 0b26ab9dce74 ("Bluetooth: AMP: Handle Accept phylink command status evt")
Signed-off-by: Pan Bian 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Fix initializing response id after clearing struct

2021-03-03T17:22:37+00:00

[ Upstream commit a5687c644015a097304a2e47476c0ecab2065734 ]

Looks like this was missed when patching the source to clear the structures
throughout, causing this one instance to clear the struct after the response
id is assigned.

Fixes: eddb7732119d ("Bluetooth: A2MP: Fix not initializing all members")
Signed-off-by: Christopher William Snowhill 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Fix null pointer dereference in hci_event_packet()

2020-12-29T12:46:52+00:00

[ Upstream commit 6dfccd13db2ff2b709ef60a50163925d477549aa ]

AMP_MGR is getting derefernced in hci_phy_link_complete_evt(), when called
from hci_event_packet() and there is a possibility, that hcon->amp_mgr may
not be found when accessing after initialization of hcon.

- net/bluetooth/hci_event.c:4945
The bug seems to get triggered in this line:

bredr_hcon = hcon->amp_mgr->l2cap_conn->hcon;

Fix it by adding a NULL check for the hcon->amp_mgr before checking the ev-status.

Fixes: d5e911928bd8 ("Bluetooth: AMP: Process Physical Link Complete evt")
Reported-and-tested-by: syzbot+0bef568258653cff272f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=0bef568258653cff272f
Signed-off-by: Anmol Karn 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt()

2020-12-29T12:46:50+00:00

commit f7e0e8b2f1b0a09b527885babda3e912ba820798 upstream.

`num_reports` is not being properly checked. A malformed event packet with
a large `num_reports` number makes hci_le_direct_adv_report_evt() read out
of bounds. Fix it.

Cc: stable@vger.kernel.org
Fixes: 2f010b55884e ("Bluetooth: Add support for handling LE Direct Advertising Report events")
Reported-and-tested-by: syzbot+24ebd650e20bd263ca01@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=24ebd650e20bd263ca01
Signed-off-by: Peilin Ye 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Only mark socket zapped after unlocking

2020-10-29T08:07:18+00:00

[ Upstream commit 20ae4089d0afeb24e9ceb026b996bfa55c983cc2 ]

Since l2cap_sock_teardown_cb doesn't acquire the channel lock before
setting the socket as zapped, it could potentially race with
l2cap_sock_release which frees the socket. Thus, wait until the cleanup
is complete before marking the socket as zapped.

This race was reproduced on a JBL GO speaker after the remote device
rejected L2CAP connection due to resource unavailability.

Here is a dmesg log with debug logs from a repro of this bug:
[ 3465.424086] Bluetooth: hci_core.c:hci_acldata_packet() hci0 len 16 handle 0x0003 flags 0x0002
[ 3465.424090] Bluetooth: hci_conn.c:hci_conn_enter_active_mode() hcon 00000000cfedd07d mode 0
[ 3465.424094] Bluetooth: l2cap_core.c:l2cap_recv_acldata() conn 000000007eae8952 len 16 flags 0x2
[ 3465.424098] Bluetooth: l2cap_core.c:l2cap_recv_frame() len 12, cid 0x0001
[ 3465.424102] Bluetooth: l2cap_core.c:l2cap_raw_recv() conn 000000007eae8952
[ 3465.424175] Bluetooth: l2cap_core.c:l2cap_sig_channel() code 0x03 len 8 id 0x0c
[ 3465.424180] Bluetooth: l2cap_core.c:l2cap_connect_create_rsp() dcid 0x0045 scid 0x0000 result 0x02 status 0x00
[ 3465.424189] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 4
[ 3465.424196] Bluetooth: l2cap_core.c:l2cap_chan_del() chan 000000006acf9bff, conn 000000007eae8952, err 111, state BT_CONNECT
[ 3465.424203] Bluetooth: l2cap_sock.c:l2cap_sock_teardown_cb() chan 000000006acf9bff state BT_CONNECT
[ 3465.424221] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 3
[ 3465.424226] Bluetooth: hci_core.h:hci_conn_drop() hcon 00000000cfedd07d orig refcnt 6
[ 3465.424234] BUG: spinlock bad magic on CPU#2, kworker/u17:0/159
[ 3465.425626] Bluetooth: hci_sock.c:hci_sock_sendmsg() sock 000000002bb0cb64 sk 00000000a7964053
[ 3465.430330]  lock: 0xffffff804410aac0, .magic: 00000000, .owner: /-1, .owner_cpu: 0
[ 3465.430332] Causing a watchdog bite!

Signed-off-by: Abhishek Pandit-Subedi 
Reported-by: Balakrishna Godavarthi 
Reviewed-by: Manish Mandlik 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Sasha Levin

Bluetooth: Disconnect if E0 is used for Level 4

2020-10-17T08:29:54+00:00

commit 8746f135bb01872ff412d408ea1aa9ebd328c1f5 upstream.

E0 is not allowed with Level 4:

BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C page 1319:

  '128-bit equivalent strength for link and encryption keys
   required using FIPS approved algorithms (E0 not allowed,
   SAFER+ not allowed, and P-192 not allowed; encryption key
   not shortened'

SC enabled:

> HCI Event: Read Remote Extended Features (0x23) plen 13
        Status: Success (0x00)
        Handle: 256
        Page: 1/2
        Features: 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          Secure Simple Pairing (Host Support)
          LE Supported (Host)
          Secure Connections (Host Support)
> HCI Event: Encryption Change (0x08) plen 4
        Status: Success (0x00)
        Handle: 256
        Encryption: Enabled with AES-CCM (0x02)

SC disabled:

> HCI Event: Read Remote Extended Features (0x23) plen 13
        Status: Success (0x00)
        Handle: 256
        Page: 1/2
        Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          Secure Simple Pairing (Host Support)
          LE Supported (Host)
> HCI Event: Encryption Change (0x08) plen 4
        Status: Success (0x00)
        Handle: 256
        Encryption: Enabled with E0 (0x01)
[May 8 20:23] Bluetooth: hci0: Invalid security: expect AES but E0 was used
< HCI Command: Disconnect (0x01|0x0006) plen 3
        Handle: 256
        Reason: Authentication Failure (0x05)

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Cc: Hans-Christian Noren Egtvedt 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Consolidate encryption handling in hci_encrypt_cfm

2020-10-17T08:29:53+00:00

commit 3ca44c16b0dcc764b641ee4ac226909f5c421aa3 upstream.

This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection
state is BT_CONFIG so callers don't have to check the state.

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Cc: Hans-Christian Noren Egtvedt 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: MGMT: Fix not checking if BT_HS is enabled

2020-10-17T08:29:53+00:00

commit b560a208cda0297fef6ff85bbfd58a8f0a52a543 upstream.

This checks if BT_HS is enabled relecting it on MGMT_SETTING_HS instead
of always reporting it as supported.

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman