linux-stable.git/net/bluetooth, branch v3.14.78

Bluetooth: Fix l2cap_sock_setsockopt() with optname BT_RCVMTU

2016-08-20T09:53:20+00:00

commit 23bc6ab0a0912146fd674a0becc758c3162baabc upstream.

When we retrieve imtu value from userspace we should use 16 bit pointer
cast instead of 32 as it's defined that way in headers. Fixes setsockopt
calls on big-endian platforms.

Signed-off-by: Amadeusz Sławiński 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

bluetooth: Validate socket address length in sco_sock_bind().

2016-01-23T04:34:55+00:00

[ Upstream commit 5233252fce714053f0151680933571a2da9cbfb4 ]

Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: hidp: fix device disconnect on idle timeout

2015-12-09T18:42:58+00:00

commit 660f0fc07d21114549c1862e67e78b1cf0c90c29 upstream.

The HIDP specs define an idle-timeout which automatically disconnects a
device. This has always been implemented in the HIDP layer and forced a
synchronous shutdown of the hidp-scheduler. This works just fine, but
lacks a forced disconnect on the underlying l2cap channels. This has been
broken since:

    commit 5205185d461d5902325e457ca80bd421127b7308
    Author: David Herrmann 
    Date:   Sat Apr 6 20:28:47 2013 +0200

        Bluetooth: hidp: remove old session-management

The old session-management always forced an l2cap error on the ctrl/intr
channels when shutting down. The new session-management skips this, as we
don't want to enforce channel policy on the caller. In other words, if
user-space removes an HIDP device, the underlying channels (which are
*owned* and *referenced* by user-space) are still left active. User-space
needs to call shutdown(2) or close(2) to release them.

Unfortunately, this does not work with idle-timeouts. There is no way to
signal user-space that the HIDP layer has been stopped. The API simply
does not support any event-passing except for poll(2). Hence, we restore
old behavior and force EUNATCH on the sockets if the HIDP layer is
disconnected due to idle-timeouts (behavior of explicit disconnects
remains unmodified). User-space can still call

    getsockopt(..., SO_ERROR, ...)

..to retrieve the EUNATCH error and clear sk_err. Hence, the channels can
still be re-used (which nobody does so far, though). Therefore, the API
still supports the new behavior, but with this patch it's also compatible
to the old implicit channel shutdown.

Reported-by: Mark Haun 
Reported-by: Luiz Augusto von Dentz 
Signed-off-by: David Herrmann 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Fix incorrect LE CoC PDU length restriction based on HCI MTU

2014-10-30T16:38:23+00:00

commit 72c6fb915ff2d30ae14053edee4f0d30019bad76 upstream.

The l2cap_create_le_flowctl_pdu() function that l2cap_segment_le_sdu()
calls is perfectly capable of doing packet fragmentation if given bigger
PDUs than the HCI buffers allow. Forcing the PDU length based on the HCI
MTU (conn->mtu) would therefore needlessly strict operation on hardware
with limited LE buffers (e.g. both Intel and Broadcom seem to have this
set to just 27 bytes).

This patch removes the restriction and makes it possible to send PDUs of
the full length that the remote MPS value allows.

Signed-off-by: Johan Hedberg 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Avoid use of session socket after the session gets freed

2014-09-17T16:19:23+00:00

commit 32333edb82fb2009980eefc5518100068147ab82 upstream.

The commits 08c30aca9e698faddebd34f81e1196295f9dc063 "Bluetooth: Remove
RFCOMM session refcnt" and 8ff52f7d04d9cc31f1e81dcf9a2ba6335ed34905
"Bluetooth: Return RFCOMM session ptrs to avoid freed session"
allow rfcomm_recv_ua and rfcomm_session_close to delete the session
(and free the corresponding socket) and propagate NULL session pointer
to the upper callers.

Additional fix is required to terminate the loop in rfcomm_process_rx
function to avoid use of freed 'sk' memory.

The issue is only reproducible with kernel option CONFIG_PAGE_POISONING
enabled making freed memory being changed and filled up with fixed char
value used to unmask use-after-free issues.

Signed-off-by: Vignesh Raman 
Signed-off-by: Vitaly Kuzmichev 
Acked-by: Dean Jenkins 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: never linger on process exit

2014-09-17T16:19:22+00:00

commit 093facf3634da1b0c2cc7ed106f1983da901bbab upstream.

If the current process is exiting, lingering on socket close will make
it unkillable, so we should avoid it.

Reproducer:

  #include 
  #include 

  #define BTPROTO_L2CAP   0
  #define BTPROTO_SCO     2
  #define BTPROTO_RFCOMM  3

  int main()
  {
          int fd;
          struct linger ling;

          fd = socket(PF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM);
          //or: fd = socket(PF_BLUETOOTH, SOCK_DGRAM, BTPROTO_L2CAP);
          //or: fd = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO);

          ling.l_onoff = 1;
          ling.l_linger = 1000000000;
          setsockopt(fd, SOL_SOCKET, SO_LINGER, &ling, sizeof(ling));

          return 0;
  }

Signed-off-by: Vladimir Davydov 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Allow change security level on ATT_CID in slave role

2014-07-09T18:18:26+00:00

commit 92d1372e1a9fec00e146b74e8b9ad7a385b9b37f upstream.

Kernel supports SMP Security Request so don't block increasing security
when we are slave.

Signed-off-by: Marcin Kraglak 
Acked-by: Johan Hedberg 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Fix locking of hdev when calling into SMP code

2014-07-09T18:18:26+00:00

commit c73f94b8c093a615ce80eabbde0ac6eb9abfe31a upstream.

The SMP code expects hdev to be unlocked since e.g. crypto functions
will try to (re)lock it. Therefore, we need to release the lock before
calling into smp.c from mgmt.c. Without this we risk a deadlock whenever
the smp_user_confirm_reply() function is called.

Signed-off-by: Johan Hedberg 
Tested-by: Lukasz Rymanowski 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Fix indicating discovery state when canceling inquiry

2014-07-09T18:18:26+00:00

commit 50143a433b70e3145bcf8a4a4e54f0c11bdee32b upstream.

When inquiry is canceled through the HCI_Cancel_Inquiry command there is
no Inquiry Complete event generated. Instead, all we get is the command
complete for the HCI_Inquiry_Cancel command. This means that we must
call the hci_discovery_set_state() function from the respective command
complete handler in order to ensure that user space knows the correct
discovery state.

Signed-off-by: Johan Hedberg 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Fix check for connection encryption

2014-07-09T18:18:25+00:00

commit e694788d73efe139b24f78b036deb97fe57fa8cb upstream.

The conn->link_key variable tracks the type of link key in use. It is
set whenever we respond to a link key request as well as when we get a
link key notification event.

These two events do not however always guarantee that encryption is
enabled: getting a link key request and responding to it may only mean
that the remote side has requested authentication but not encryption. On
the other hand, the encrypt change event is a certain guarantee that
encryption is enabled. The real encryption state is already tracked in
the conn->link_mode variable through the HCI_LM_ENCRYPT bit.

This patch fixes a check for encryption in the hci_conn_auth function to
use the proper conn->link_mode value and thereby eliminates the chance
of a false positive result.

Signed-off-by: Johan Hedberg 
Signed-off-by: Marcel Holtmann 
Signed-off-by: Greg Kroah-Hartman