linux-stable.git/net/bluetooth/hci_request.c, branch linux-5.4.y

Bluetooth: Fix memory leak in hci_req_sync_complete()

2024-05-02T14:18:28+00:00

commit 45d355a926ab40f3ae7bc0b0a00cb0e3e8a5a810 upstream.

In 'hci_req_sync_complete()', always free the previous sync
request state before assigning reference to a new one.

Reported-by: syzbot+39ec16ff6cc18b1d066d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=39ec16ff6cc18b1d066d
Cc: stable@vger.kernel.org
Fixes: f60cb30579d3 ("Bluetooth: Convert hci_req_sync family of function to new request API")
Signed-off-by: Dmitry Antipov 
Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Greg Kroah-Hartman

bluetooth: eliminate the potential race condition when removing the HCI controller

2021-05-14T07:44:10+00:00

commit e2cb6b891ad2b8caa9131e3be70f45243df82a80 upstream.

There is a possible race condition vulnerability between issuing a HCI
command and removing the cont.  Specifically, functions hci_req_sync()
and hci_dev_do_close() can race each other like below:

thread-A in hci_req_sync()      |   thread-B in hci_dev_do_close()
                                |   hci_req_sync_lock(hdev);
test_bit(HCI_UP, &hdev->flags); |
...                             |   test_and_clear_bit(HCI_UP, &hdev->flags)
hci_req_sync_lock(hdev);        |
                                |
In this commit we alter the sequence in function hci_req_sync(). Hence,
the thread-A cannot issue th.

Signed-off-by: Lin Ma 
Cc: Marcel Holtmann 
Fixes: 7c6a329e4447 ("[Bluetooth] Fix regression from using default link policy")
Signed-off-by: Greg Kroah-Hartman

Bluetooth: Fix advertising duplicated flags

2019-12-31T15:44:33+00:00

[ Upstream commit 6012b9346d8959194c239fd60a62dfec98d43048 ]

Instances may have flags set as part of its data in which case the code
should not attempt to add it again otherwise it can cause duplication:

< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35
        Handle: 0x00
        Operation: Complete extended advertising data (0x03)
        Fragment preference: Minimize fragmentation (0x01)
        Data length: 0x06
        Flags: 0x04
          BR/EDR Not Supported
        Flags: 0x06
          LE General Discoverable Mode
          BR/EDR Not Supported

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Johan Hedberg 
Signed-off-by: Sasha Levin

Bluetooth: Add support for utilizing Fast Advertising Interval

2019-09-05T15:27:21+00:00

Changes made to add support for fast advertising interval
as per core 4.1 specification, section 9.3.11.2.

A peripheral device entering any of the following GAP modes and
sending either non-connectable advertising events or scannable
undirected advertising events should use adv_fast_interval2
(100ms - 150ms) for adv_fast_period(30s).

         - Non-Discoverable Mode
         - Non-Connectable Mode
         - Limited Discoverable Mode
         - General Discoverable Mode

Signed-off-by: Spoorthi Ravishankar Koppad 
Signed-off-by: Marcel Holtmann

Bluetooth: Use controller sets when available

2019-07-06T13:38:18+00:00

This makes use of controller sets when using Extended Advertising
feature thus offloading the scheduling to the controller.

Signed-off-by: Luiz Augusto von Dentz 
Signed-off-by: Marcel Holtmann

Bluetooth: Ignore CC events not matching the last HCI command

2019-05-05T17:29:04+00:00

This commit makes the kernel not send the next queued HCI command until
a command complete arrives for the last HCI command sent to the
controller. This change avoids a problem with some buggy controllers
(seen on two SKUs of QCA9377) that send an extra command complete event
for the previous command after the kernel had already sent a new HCI
command to the controller.

The problem was reproduced when starting an active scanning procedure,
where an extra command complete event arrives for the LE_SET_RANDOM_ADDR
command. When this happends the kernel ends up not processing the
command complete for the following commmand, LE_SET_SCAN_PARAM, and
ultimately behaving as if a passive scanning procedure was being
performed, when in fact controller is performing an active scanning
procedure. This makes it impossible to discover BLE devices as no device
found events are sent to userspace.

This problem is reproducible on 100% of the attempts on the affected
controllers. The extra command complete event can be seen at timestamp
27.420131 on the btmon logs bellow.

Bluetooth monitor ver 5.50
= Note: Linux version 5.0.0+ (x86_64)                                  0.352340
= Note: Bluetooth subsystem version 2.22                               0.352343
= New Index: 80:C5:F2:8F:87:84 (Primary,USB,hci0)               [hci0] 0.352344
= Open Index: 80:C5:F2:8F:87:84                                 [hci0] 0.352345
= Index Info: 80:C5:F2:8F:87:84 (Qualcomm)                      [hci0] 0.352346
@ MGMT Open: bluetoothd (privileged) version 1.14             {0x0001} 0.352347
@ MGMT Open: btmon (privileged) version 1.14                  {0x0002} 0.352366
@ MGMT Open: btmgmt (privileged) version 1.14                {0x0003} 27.302164
@ MGMT Command: Start Discovery (0x0023) plen 1       {0x0003} [hci0] 27.302310
        Address type: 0x06
          LE Public
          LE Random
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6   #1 [hci0] 27.302496
        Address: 15:60:F2:91:B2:24 (Non-Resolvable)
> HCI Event: Command Complete (0x0e) plen 4                 #2 [hci0] 27.419117
      LE Set Random Address (0x08|0x0005) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7  #3 [hci0] 27.419244
        Type: Active (0x01)
        Interval: 11.250 msec (0x0012)
        Window: 11.250 msec (0x0012)
        Own address type: Random (0x01)
        Filter policy: Accept all advertisement (0x00)
> HCI Event: Command Complete (0x0e) plen 4                 #4 [hci0] 27.420131
      LE Set Random Address (0x08|0x0005) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2      #5 [hci0] 27.420259
        Scanning: Enabled (0x01)
        Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4                 #6 [hci0] 27.420969
      LE Set Scan Parameters (0x08|0x000b) ncmd 1
        Status: Success (0x00)
> HCI Event: Command Complete (0x0e) plen 4                 #7 [hci0] 27.421983
      LE Set Scan Enable (0x08|0x000c) ncmd 1
        Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 4        {0x0003} [hci0] 27.422059
      Start Discovery (0x0023) plen 1
        Status: Success (0x00)
        Address type: 0x06
          LE Public
          LE Random
@ MGMT Event: Discovering (0x0013) plen 2             {0x0003} [hci0] 27.422067
        Address type: 0x06
          LE Public
          LE Random
        Discovery: Enabled (0x01)
@ MGMT Event: Discovering (0x0013) plen 2             {0x0002} [hci0] 27.422067
        Address type: 0x06
          LE Public
          LE Random
        Discovery: Enabled (0x01)
@ MGMT Event: Discovering (0x0013) plen 2             {0x0001} [hci0] 27.422067
        Address type: 0x06
          LE Public
          LE Random
        Discovery: Enabled (0x01)

Signed-off-by: João Paulo Rechi Vita 
Signed-off-by: Marcel Holtmann

Bluetooth: clean an indentation issue, remove extraneous space

2018-12-18T23:44:01+00:00

Trivial fix to clean up an indentation issue

Signed-off-by: Colin Ian King 
Signed-off-by: Marcel Holtmann

Bluetooth: Implement secondary advertising on different PHYs

2018-07-30T11:44:53+00:00

This patch adds support for advertising in primary and secondary
channel on different PHYs. User can add the phy preference in
the flag based on which phy type will be added in extended
advertising parameter would be set.

@ MGMT Command: Add Advertising (0x003e) plen 11
        Instance: 1
        Flags: 0x00000200
          Advertise in CODED on Secondary channel
        Duration: 0
        Timeout: 0
        Advertising data length: 0
        Scan response length: 0
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 2
        Extended advertising: Disabled (0x00)
        Number of sets: Disable all sets (0x00)
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2
        Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25
        Handle: 0x00
        Properties: 0x0000
        Min advertising interval: 1280.000 msec (0x0800)
        Max advertising interval: 1280.000 msec (0x0800)
        Channel map: 37, 38, 39 (0x07)
        Own address type: Random (0x01)
        Peer address type: Public (0x00)
        Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
        Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
        TX power: 127 dbm (0x7f)
        Primary PHY: LE Coded (0x03)
        Secondary max skip: 0x00
        Secondary PHY: LE Coded (0x03)
        SID: 0x00
        Scan request notifications: Disabled (0x00)

Signed-off-by: Jaganath Kanakkassery 
Signed-off-by: Marcel Holtmann

Bluetooth: Implement Set ADV set random address

2018-07-30T11:44:53+00:00

This basically sets the random address for the adv instance
Random address can be set only if the instance is created which
is done in Set ext adv param.

Random address and rpa expire timer and flags have been added
to adv instance which will be used when the respective
instance is scheduled.

This introduces a hci_get_random_address() which returns the
own address type and random address (rpa or nrpa) based
on the instance flags and hdev flags. New function is required
since own address type should be known before setting adv params
but address can be set only after setting params.

< HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7
        Advertising handle: 0x00
        Advertising random address: 3C:8E:56:9B:77:84 (OUI 3C-8E-56)
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1
        Status: Success (0x00)

Signed-off-by: Jaganath Kanakkassery 
Signed-off-by: Marcel Holtmann

Bluetooth: Implement disable and removal of adv instance

2018-07-30T11:44:53+00:00

If ext adv is enabled then use ext adv to disable as well.
Also remove the adv set during LE disable.

< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 2
        Extended advertising: Disabled (0x00)
        Number of sets: Disable all sets (0x00)
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2
        Status: Success (0x00)

Signed-off-by: Jaganath Kanakkassery 
Signed-off-by: Marcel Holtmann