linux-stable.git/net/6lowpan, branch linux-3.17.y

6lowpan: Allow 6LoWPAN to be modular

2014-08-07T18:44:18+00:00

Change config symbol 6LOWPAN from type bool to type tristate, so
6LoWPAN can be built modular, just like IPV6

Signed-off-by: Geert Uytterhoeven 
Acked-by: Marcel Holtmann 
Signed-off-by: David S. Miller

Merge tag 'master-2014-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

2014-08-05T20:18:20+00:00

Conflicts:
	net/6lowpan/iphc.c

Minor conflicts in iphc.c were changes overlapping with some
style cleanups.

John W. Linville says:

====================
Please pull this last(?) batch of wireless change intended for the
3.17 stream...

For the NFC bits, Samuel says:

"This is a rather quiet one, we have:

- A new driver from ST Microelectronics for their NCI ST21NFCB,
  including device tree  support.

- p2p support for the ST21NFCA driver

- A few fixes an enhancements for the NFC digital laye"

For the Atheros bits, Kalle says:

"Michal and Janusz did some important RX aggregation fixes, basically we
were missing RX reordering altogether. The 10.1 firmware doesn't support
Ad-Hoc mode and Michal fixed ath10k so that it doesn't advertise Ad-Hoc
support with that firmware. Also he implemented a workaround for a KVM
issue."

For the Bluetooth bits, Gustavo and Johan say:

"To quote Gustavo from his previous request:

'Some last minute fixes for -next. We have a fix for a use after free in
RFCOMM, another fix to an issue with ADV_DIRECT_IND and one for ADV_IND with
auto-connection handling.  Last, we added support for reading the codec and
MWS setting for controllers that support these features.'

Additionally there are fixes to LE scanning, an update to conform to the 4.1
core specification as well as fixes for tracking the page scan state. All
of these fixes are important for 3.17."

And,

"We've got:

- 6lowpan fixes/cleanups
- A couple crash fixes, one for the Marvell HCI driver and another in LE SMP.
- Fix for an incorrect connected state check
- Fix for the bondable requirement during pairing (an issue which had
  crept in because of using "pairable" when in fact the actual meaning
  was "bondable" (these have different meanings in Bluetooth)"

Along with those are some late-breaking hardware support patches in
brcmfmac and b43 as well as a stray ath9k patch.
====================

Signed-off-by: David S. Miller

6lowpan: iphc: Fix parenthesis alignments which off-by-one

2014-07-30T17:28:40+00:00

CHECK: Alignment should match open parenthesis
+	if (((hdr->flow_lbl[0] & 0x0F) == 0) &&
+	     (hdr->flow_lbl[1] == 0) && (hdr->flow_lbl[2] == 0)) {

CHECK: Alignment should match open parenthesis
+		if ((hdr->priority == 0) &&
+		   ((hdr->flow_lbl[0] & 0xF0) == 0)) {

CHECK: Alignment should match open parenthesis
+		if ((hdr->priority == 0) &&
+		   ((hdr->flow_lbl[0] & 0xF0) == 0)) {

Signed-off-by: Marcel Holtmann 
Signed-off-by: Johan Hedberg

6lowpan: iphc: Fix missing braces for if statement

2014-07-30T17:28:40+00:00

CHECK: braces {} should be used on all arms of this statement
+	if ((iphc0 & 0x03) != LOWPAN_IPHC_TTL_I)
[...]
+	else {
[...]

Signed-off-by: Marcel Holtmann 
Signed-off-by: Johan Hedberg

6lowpan: iphc: Fix missing blank line after variable declarations

2014-07-30T17:28:40+00:00

WARNING: Missing a blank line after declarations
+		struct sk_buff *new;
+		if (uncompress_udp_header(skb, &uh))

Signed-off-by: Marcel Holtmann 
Signed-off-by: Johan Hedberg

6lowpan: iphc: Fix issues with alignment matching open parenthesis

2014-07-30T17:28:40+00:00

This patch fixes all the issues with alignment matching of open
parenthesis found by checkpatch.pl and makes them follow the
network coding style now.

CHECK: Alignment should match open parenthesis
+static int uncompress_addr(struct sk_buff *skb,
+				struct in6_addr *ipaddr, const u8 address_mode,

CHECK: Alignment should match open parenthesis
+static int uncompress_context_based_src_addr(struct sk_buff *skb,
+						struct in6_addr *ipaddr,

CHECK: Alignment should match open parenthesis
+static int skb_deliver(struct sk_buff *skb, struct ipv6hdr *hdr,
+		struct net_device *dev, skb_delivery_cb deliver_skb)

CHECK: Alignment should match open parenthesis
+	new = skb_copy_expand(skb, sizeof(struct ipv6hdr), skb_tailroom(skb),
+								GFP_ATOMIC);

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw skb data dump before receiving",
+			new->data, new->len);

CHECK: Alignment should match open parenthesis
+lowpan_uncompress_multicast_daddr(struct sk_buff *skb,
+		struct in6_addr *ipaddr,

CHECK: Alignment should match open parenthesis
+	raw_dump_inline(NULL, "Reconstructed ipv6 multicast addr is",
+				ipaddr->s6_addr, 16);

CHECK: Alignment should match open parenthesis
+int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
+		const u8 *saddr, const u8 saddr_type, const u8 saddr_len,

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw skb data dump uncompressed",
+				skb->data, skb->len);

CHECK: Alignment should match open parenthesis
+		err = uncompress_addr(skb, &hdr.saddr, tmp, saddr,
+					saddr_type, saddr_len);

CHECK: Alignment should match open parenthesis
+		err = uncompress_addr(skb, &hdr.daddr, tmp, daddr,
+					daddr_type, daddr_len);

CHECK: Alignment should match open parenthesis
+		pr_debug("dest: stateless compression mode %d dest %pI6c\n",
+			tmp, &hdr.daddr);

CHECK: Alignment should match open parenthesis
+		raw_dump_table(__func__, "raw UDP header dump",
+				      (u8 *)&uh, sizeof(uh));

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw header dump", (u8 *)&hdr,
+							sizeof(hdr));

CHECK: Alignment should match open parenthesis
+int lowpan_header_compress(struct sk_buff *skb, struct net_device *dev,
+			unsigned short type, const void *_daddr,

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw skb network header dump",
+		skb_network_header(skb), sizeof(struct ipv6hdr));

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__,
+			"sending raw skb network uncompressed packet",

CHECK: Alignment should match open parenthesis
+	if (((hdr->flow_lbl[0] & 0x0F) == 0) &&
+	     (hdr->flow_lbl[1] == 0) && (hdr->flow_lbl[2] == 0)) {

WARNING: quoted string split across lines
+			pr_debug("dest address unicast link-local %pI6c "
+				"iphc1 0x%02x\n", &hdr->daddr, iphc1);

CHECK: Alignment should match open parenthesis
+	raw_dump_table(__func__, "raw skb data dump compressed",
+				skb->data, skb->len);

Signed-off-by: Marcel Holtmann 
Signed-off-by: Johan Hedberg

6lowpan: iphc: Fix block comments to match networking style

2014-07-30T17:28:40+00:00

This patch fixes all the block comment issues found by checkpatch.pl and
makes them match the network style now.

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Based on patches from Jon Smirl 

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Uncompress address function for source and

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+/*
+ * Uncompress address function for source context

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+		/*
+		 * UDP lenght needs to be infered from the lower layers

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Traffic Class and FLow Label carried in-line

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Traffic class carried in-line

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Flow Label carried in-line

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+		/*
+		 * replace the compressed UDP head by the uncompressed UDP

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * As we copy some bit-length fields, in the IPHC encoding bytes,

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Traffic class, flow label

WARNING: networking block comments don't use an empty /* line, use /* Comment...
+	/*
+	 * Hop limit

Signed-off-by: Marcel Holtmann 
Signed-off-by: Johan Hedberg

6lowpan: iphc: remove check on null

2014-07-30T17:28:39+00:00

This memory is placed on stack and can't be null so remove the check on
null.

Signed-off-by: Alexander Aring 
Signed-off-by: Marcel Holtmann

6lowpan: iphc: use ipv6 api to check address scope

2014-07-30T17:28:39+00:00

This patch removes the own implementation to check of link-layer,
broadcast and any address type and use the IPv6 api for that.

Signed-off-by: Alexander Aring 
Signed-off-by: Marcel Holtmann

6lowpan: iphc: cleanup use of lowpan_push_hc_data

2014-07-30T17:28:39+00:00

This patch uses the lowpan_push_hc_data functions in several places
where we can use it. The lowpan_push_hc_data was introduced in some
previous patches.

Signed-off-by: Alexander Aring 
Signed-off-by: Marcel Holtmann