linux-stable.git/mm, branch v3.13.6

mm, thp: fix infinite loop on memcg OOM

2014-03-07T06:06:29+00:00

commit 9845cbbd113fbb5b769a45d8e88dc47bc12df4e0 upstream.

Masayoshi Mizuma reported a bug with the hang of an application under
the memcg limit.  It happens on write-protection fault to huge zero page

If we successfully allocate a huge page to replace zero page but hit the
memcg limit we need to split the zero page with split_huge_page_pmd()
and fallback to small pages.

The other part of the problem is that VM_FAULT_OOM has special meaning
in do_huge_pmd_wp_page() context.  __handle_mm_fault() expects the page
to be split if it sees VM_FAULT_OOM and it will will retry page fault
handling.  This causes an infinite loop if the page was not split.

do_huge_pmd_wp_zero_page_fallback() can return VM_FAULT_OOM if it failed
to allocate one small page, so fallback to small pages will not help.

The solution for this part is to replace VM_FAULT_OOM with
VM_FAULT_FALLBACK is fallback required.

Signed-off-by: Kirill A. Shutemov 
Reported-by: Masayoshi Mizuma 
Reviewed-by: Michal Hocko 
Cc: Johannes Weiner 
Cc: Andrea Arcangeli 
Cc: David Rientjes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm/memory-failure.c: move refcount only in !MF_COUNT_INCREASED

2014-02-22T21:34:41+00:00

commit 8d547ff4ac5927245e0833ac18528f939da0ee0e upstream.

mce-test detected a test failure when injecting error to a thp tail
page.  This is because we take page refcount of the tail page in
madvise_hwpoison() while the fix in commit a3e0f9e47d5e
("mm/memory-failure.c: transfer page count from head page to tail page
after split thp") assumes that we always take refcount on the head page.

When a real memory error happens we take refcount on the head page where
memory_failure() is called without MF_COUNT_INCREASED set, so it seems
to me that testing memory error on thp tail page using madvise makes
little sense.

This patch cancels moving refcount in !MF_COUNT_INCREASED for valid
testing.

[akpm@linux-foundation.org: s/&&/&/]
Signed-off-by: Naoya Horiguchi 
Cc: Andi Kleen 
Cc: Wanpeng Li 
Cc: Chen Gong 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm: __set_page_dirty_nobuffers() uses spin_lock_irqsave() instead of spin_lock_irq()

2014-02-20T19:10:09+00:00

commit a85d9df1ea1d23682a0ed1e100e6965006595d06 upstream.

During aio stress test, we observed the following lockdep warning.  This
mean AIO+numa_balancing is currently deadlockable.

The problem is, aio_migratepage disable interrupt, but
__set_page_dirty_nobuffers unintentionally enable it again.

Generally, all helper function should use spin_lock_irqsave() instead of
spin_lock_irq() because they don't know caller at all.

   other info that might help us debug this:
    Possible unsafe locking scenario:

          CPU0
          ----
     lock(&(&ctx->completion_lock)->rlock);
     
       lock(&(&ctx->completion_lock)->rlock);

    *** DEADLOCK ***

      dump_stack+0x19/0x1b
      print_usage_bug+0x1f7/0x208
      mark_lock+0x21d/0x2a0
      mark_held_locks+0xb9/0x140
      trace_hardirqs_on_caller+0x105/0x1d0
      trace_hardirqs_on+0xd/0x10
      _raw_spin_unlock_irq+0x2c/0x50
      __set_page_dirty_nobuffers+0x8c/0xf0
      migrate_page_copy+0x434/0x540
      aio_migratepage+0xb1/0x140
      move_to_new_page+0x7d/0x230
      migrate_pages+0x5e5/0x700
      migrate_misplaced_page+0xbc/0xf0
      do_numa_page+0x102/0x190
      handle_pte_fault+0x241/0x970
      handle_mm_fault+0x265/0x370
      __do_page_fault+0x172/0x5a0
      do_page_fault+0x1a/0x70
      page_fault+0x28/0x30

Signed-off-by: KOSAKI Motohiro 
Cc: Larry Woodman 
Cc: Rik van Riel 
Cc: Johannes Weiner 
Acked-by: David Rientjes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm/swap: fix race on swap_info reuse between swapoff and swapon

2014-02-20T19:10:09+00:00

commit f893ab41e4dae2fe8991faf5d86d029068d1ef3a upstream.

swapoff clear swap_info's SWP_USED flag prematurely and free its
resources after that.  A concurrent swapon will reuse this swap_info
while its previous resources are not cleared completely.

These late freed resources are:
 - p->percpu_cluster
 - swap_cgroup_ctrl[type]
 - block_device setting
 - inode->i_flags &= ~S_SWAPFILE

This patch clears the SWP_USED flag after all its resources are freed,
so that swapon can reuse this swap_info by alloc_swap_info() safely.

[akpm@linux-foundation.org: tidy up code comment]
Signed-off-by: Weijie Yang 
Acked-by: Hugh Dickins 
Cc: Krzysztof Kozlowski 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

powerpc/thp: Fix crash on mremap

2014-02-13T21:55:44+00:00

commit b3084f4db3aeb991c507ca774337c7e7893ed04f upstream.

This patch fix the below crash

NIP [c00000000004cee4] .__hash_page_thp+0x2a4/0x440
LR [c0000000000439ac] .hash_page+0x18c/0x5e0
...
Call Trace:
[c000000736103c40] [00001ffffb000000] 0x1ffffb000000(unreliable)
[437908.479693] [c000000736103d50] [c0000000000439ac] .hash_page+0x18c/0x5e0
[437908.479699] [c000000736103e30] [c00000000000924c] .do_hash_page+0x4c/0x58

On ppc64 we use the pgtable for storing the hpte slot information and
store address to the pgtable at a constant offset (PTRS_PER_PMD) from
pmd. On mremap, when we switch the pmd, we need to withdraw and deposit
the pgtable again, so that we find the pgtable at PTRS_PER_PMD offset
from new pmd.

We also want to move the withdraw and deposit before the set_pmd so
that, when page fault find the pmd as trans huge we can be sure that
pgtable can be located at the offset.

Signed-off-by: Aneesh Kumar K.V 
Acked-by: Kirill A. Shutemov 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Greg Kroah-Hartman

mm, oom: base root bonus on current usage

2014-02-13T21:55:37+00:00

commit 778c14affaf94a9e4953179d3e13a544ccce7707 upstream.

A 3% of system memory bonus is sometimes too excessive in comparison to
other processes.

With commit a63d83f427fb ("oom: badness heuristic rewrite"), the OOM
killer tries to avoid killing privileged tasks by subtracting 3% of
overall memory (system or cgroup) from their per-task consumption.  But
as a result, all root tasks that consume less than 3% of overall memory
are considered equal, and so it only takes 33+ privileged tasks pushing
the system out of memory for the OOM killer to do something stupid and
kill dhclient or other root-owned processes.  For example, on a 32G
machine it can't tell the difference between the 1M agetty and the 10G
fork bomb member.

The changelog describes this 3% boost as the equivalent to the global
overcommit limit being 3% higher for privileged tasks, but this is not
the same as discounting 3% of overall memory from _every privileged task
individually_ during OOM selection.

Replace the 3% of system memory bonus with a 3% of current memory usage
bonus.

By giving root tasks a bonus that is proportional to their actual size,
they remain comparable even when relatively small.  In the example
above, the OOM killer will discount the 1M agetty's 256 badness points
down to 179, and the 10G fork bomb's 262144 points down to 183500 points
and make the right choice, instead of discounting both to 0 and killing
agetty because it's first in the task list.

Signed-off-by: David Rientjes 
Reported-by: Johannes Weiner 
Acked-by: Johannes Weiner 
Cc: Michal Hocko 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm: numa: initialise numa balancing after jump label initialisation

2014-02-13T21:55:37+00:00

commit c297663c0b3930491a3cb2aba4b6e5a7159c3503 upstream.

The command line parsing takes place before jump labels are initialised
which generates a warning if numa_balancing= is specified and
CONFIG_JUMP_LABEL is set.

On older kernels before commit c4b2c0c5f647 ("static_key: WARN on usage
before jump_label_init was called") the kernel would have crashed.  This
patch enables automatic numa balancing later in the initialisation
process if numa_balancing= is specified.

Signed-off-by: Mel Gorman 
Acked-by: Rik van Riel 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

numa: add a sysctl for numa_balancing

2014-02-13T21:55:36+00:00

commit 54a43d54988a3731d644fdeb7a1d6f46b4ac64c7 upstream.

Add a working sysctl to enable/disable automatic numa memory balancing
at runtime.

This allows us to track down performance problems with this feature and
is generally a good idea.

This was possible earlier through debugfs, but only with special
debugging options set.  Also fix the boot message.

[akpm@linux-foundation.org: s/sched_numa_balancing/sysctl_numa_balancing/]
Signed-off-by: Andi Kleen 
Acked-by: Mel Gorman 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

slub: Fix calculation of cpu slabs

2014-02-13T21:55:30+00:00

commit 8afb1474db4701d1ab80cd8251137a3260e6913e upstream.

  /sys/kernel/slab/:t-0000048 # cat cpu_slabs
  231 N0=16 N1=215
  /sys/kernel/slab/:t-0000048 # cat slabs
  145 N0=36 N1=109

See, the number of slabs is smaller than that of cpu slabs.

The bug was introduced by commit 49e2258586b423684f03c278149ab46d8f8b6700
("slub: per cpu cache for partial pages").

We should use page->pages instead of page->pobjects when calculating
the number of cpu partial slabs. This also fixes the mapping of slabs
and nodes.

As there's no variable storing the number of total/active objects in
cpu partial slabs, and we don't have user interfaces requiring those
statistics, I just add WARN_ON for those cases.

Acked-by: Christoph Lameter 
Reviewed-by: Wanpeng Li 
Signed-off-by: Li Zefan 
Signed-off-by: Pekka Enberg 
Signed-off-by: Greg Kroah-Hartman

mm: ignore VM_SOFTDIRTY on VMA merging

2014-02-13T21:55:29+00:00

commit 34228d473efe764d4db7c0536375f0c993e6e06a upstream.

The VM_SOFTDIRTY bit affects vma merge routine: if two VMAs has all bits
in vm_flags matched except dirty bit the kernel can't longer merge them
and this forces the kernel to generate new VMAs instead.

It finally may lead to the situation when userspace application reaches
vm.max_map_count limit and get crashed in worse case

 | (gimp:11768): GLib-ERROR **: gmem.c:110: failed to allocate 4096 bytes
 |
 | (file-tiff-load:12038): LibGimpBase-WARNING **: file-tiff-load: gimp_wire_read(): error
 | xinit: connection to X server lost
 |
 | waiting for X server to shut down
 | /usr/lib64/gimp/2.0/plug-ins/file-tiff-load terminated: Hangup
 | /usr/lib64/gimp/2.0/plug-ins/script-fu terminated: Hangup
 | /usr/lib64/gimp/2.0/plug-ins/script-fu terminated: Hangup

  https://bugzilla.kernel.org/show_bug.cgi?id=67651
  https://bugzilla.gnome.org/show_bug.cgi?id=719619#c0

Initial problem came from missed VM_SOFTDIRTY in do_brk() routine but
even if we would set up VM_SOFTDIRTY here, there is still a way to
prevent VMAs from merging: one can call

 | echo 4 > /proc/$PID/clear_refs

and clear all VM_SOFTDIRTY over all VMAs presented in memory map, then
new do_brk() will try to extend old VMA and finds that dirty bit doesn't
match thus new VMA will be generated.

As discussed with Pavel, the right approach should be to ignore
VM_SOFTDIRTY bit when we're trying to merge VMAs and if merge successed
we mark extended VMA with dirty bit where needed.

Signed-off-by: Cyrill Gorcunov 
Reported-by: Bastian Hougaard 
Reported-by: Mel Gorman 
Cc: Pavel Emelyanov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman