<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/mm, branch v3.10.8</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>Fix TLB gather virtual address range invalidation corner cases</title>
<updated>2013-08-20T15:43:05+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-08-15T18:42:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=8e220cfd1a9f6c763a108a3b964a888fe341dabd'/>
<id>8e220cfd1a9f6c763a108a3b964a888fe341dabd</id>
<content type='text'>
commit 2b047252d087be7f2ba088b4933cd904f92e6fce upstream.

Ben Tebulin reported:

 "Since v3.7.2 on two independent machines a very specific Git
  repository fails in 9/10 cases on git-fsck due to an SHA1/memory
  failures.  This only occurs on a very specific repository and can be
  reproduced stably on two independent laptops.  Git mailing list ran
  out of ideas and for me this looks like some very exotic kernel issue"

and bisected the failure to the backport of commit 53a59fc67f97 ("mm:
limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT").

That commit itself is not actually buggy, but what it does is to make it
much more likely to hit the partial TLB invalidation case, since it
introduces a new case in tlb_next_batch() that previously only ever
happened when running out of memory.

The real bug is that the TLB gather virtual memory range setup is subtly
buggered.  It was introduced in commit 597e1c3580b7 ("mm/mmu_gather:
enable tlb flush range in generic mmu_gather"), and the range handling
was already fixed at least once in commit e6c495a96ce0 ("mm: fix the TLB
range flushed when __tlb_remove_page() runs out of slots"), but that fix
was not complete.

The problem with the TLB gather virtual address range is that it isn't
set up by the initial tlb_gather_mmu() initialization (which didn't get
the TLB range information), but it is set up ad-hoc later by the
functions that actually flush the TLB.  And so any such case that forgot
to update the TLB range entries would potentially miss TLB invalidates.

Rather than try to figure out exactly which particular ad-hoc range
setup was missing (I personally suspect it's the hugetlb case in
zap_huge_pmd(), which didn't have the same logic as zap_pte_range()
did), this patch just gets rid of the problem at the source: make the
TLB range information available to tlb_gather_mmu(), and initialize it
when initializing all the other tlb gather fields.

This makes the patch larger, but conceptually much simpler.  And the end
result is much more understandable; even if you want to play games with
partial ranges when invalidating the TLB contents in chunks, now the
range information is always there, and anybody who doesn't want to
bother with it won't introduce subtle bugs.

Ben verified that this fixes his problem.

Reported-bisected-and-tested-by: Ben Tebulin &lt;tebulin@googlemail.com&gt;
Build-testing-by: Stephen Rothwell &lt;sfr@canb.auug.org.au&gt;
Build-testing-by: Richard Weinberger &lt;richard.weinberger@gmail.com&gt;
Reviewed-by: Michal Hocko &lt;mhocko@suse.cz&gt;
Acked-by: Peter Zijlstra &lt;peterz@infradead.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 2b047252d087be7f2ba088b4933cd904f92e6fce upstream.

Ben Tebulin reported:

 "Since v3.7.2 on two independent machines a very specific Git
  repository fails in 9/10 cases on git-fsck due to an SHA1/memory
  failures.  This only occurs on a very specific repository and can be
  reproduced stably on two independent laptops.  Git mailing list ran
  out of ideas and for me this looks like some very exotic kernel issue"

and bisected the failure to the backport of commit 53a59fc67f97 ("mm:
limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT").

That commit itself is not actually buggy, but what it does is to make it
much more likely to hit the partial TLB invalidation case, since it
introduces a new case in tlb_next_batch() that previously only ever
happened when running out of memory.

The real bug is that the TLB gather virtual memory range setup is subtly
buggered.  It was introduced in commit 597e1c3580b7 ("mm/mmu_gather:
enable tlb flush range in generic mmu_gather"), and the range handling
was already fixed at least once in commit e6c495a96ce0 ("mm: fix the TLB
range flushed when __tlb_remove_page() runs out of slots"), but that fix
was not complete.

The problem with the TLB gather virtual address range is that it isn't
set up by the initial tlb_gather_mmu() initialization (which didn't get
the TLB range information), but it is set up ad-hoc later by the
functions that actually flush the TLB.  And so any such case that forgot
to update the TLB range entries would potentially miss TLB invalidates.

Rather than try to figure out exactly which particular ad-hoc range
setup was missing (I personally suspect it's the hugetlb case in
zap_huge_pmd(), which didn't have the same logic as zap_pte_range()
did), this patch just gets rid of the problem at the source: make the
TLB range information available to tlb_gather_mmu(), and initialize it
when initializing all the other tlb gather fields.

This makes the patch larger, but conceptually much simpler.  And the end
result is much more understandable; even if you want to play games with
partial ranges when invalidating the TLB contents in chunks, now the
range information is always there, and anybody who doesn't want to
bother with it won't introduce subtle bugs.

Ben verified that this fixes his problem.

Reported-bisected-and-tested-by: Ben Tebulin &lt;tebulin@googlemail.com&gt;
Build-testing-by: Stephen Rothwell &lt;sfr@canb.auug.org.au&gt;
Build-testing-by: Richard Weinberger &lt;richard.weinberger@gmail.com&gt;
Reviewed-by: Michal Hocko &lt;mhocko@suse.cz&gt;
Acked-by: Peter Zijlstra &lt;peterz@infradead.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>memcg: don't initialize kmem-cache destroying work for root caches</title>
<updated>2013-08-20T15:43:02+00:00</updated>
<author>
<name>Andrey Vagin</name>
<email>avagin@openvz.org</email>
</author>
<published>2013-08-13T23:00:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0dcf19b4fb41449de4d1f953f86aa6a90accdff5'/>
<id>0dcf19b4fb41449de4d1f953f86aa6a90accdff5</id>
<content type='text'>
commit 3e6b11df245180949938734bc192eaf32f3a06b3 upstream.

struct memcg_cache_params has a union.  Different parts of this union
are used for root and non-root caches.  A part with destroying work is
used only for non-root caches.

I fixed the same problem in another place v3.9-rc1-16204-gf101a94, but
didn't notice this one.

This patch fixes the kernel panic:

[   46.848187] BUG: unable to handle kernel paging request at 000000fffffffeb8
[   46.849026] IP: [&lt;ffffffff811a484c&gt;] kmem_cache_destroy_memcg_children+0x6c/0xc0
[   46.849092] PGD 0
[   46.849092] Oops: 0000 [#1] SMP
...

Signed-off-by: Andrey Vagin &lt;avagin@openvz.org&gt;
Cc: Glauber Costa &lt;glommer@openvz.org&gt;
Cc: Johannes Weiner &lt;hannes@cmpxchg.org&gt;
Acked-by: Michal Hocko &lt;mhocko@suse.cz&gt;
Cc: Balbir Singh &lt;bsingharora@gmail.com&gt;
Cc: KAMEZAWA Hiroyuki &lt;kamezawa.hiroyu@jp.fujitsu.com&gt;
Cc: Konstantin Khlebnikov &lt;khlebnikov@openvz.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 3e6b11df245180949938734bc192eaf32f3a06b3 upstream.

struct memcg_cache_params has a union.  Different parts of this union
are used for root and non-root caches.  A part with destroying work is
used only for non-root caches.

I fixed the same problem in another place v3.9-rc1-16204-gf101a94, but
didn't notice this one.

This patch fixes the kernel panic:

[   46.848187] BUG: unable to handle kernel paging request at 000000fffffffeb8
[   46.849026] IP: [&lt;ffffffff811a484c&gt;] kmem_cache_destroy_memcg_children+0x6c/0xc0
[   46.849092] PGD 0
[   46.849092] Oops: 0000 [#1] SMP
...

Signed-off-by: Andrey Vagin &lt;avagin@openvz.org&gt;
Cc: Glauber Costa &lt;glommer@openvz.org&gt;
Cc: Johannes Weiner &lt;hannes@cmpxchg.org&gt;
Acked-by: Michal Hocko &lt;mhocko@suse.cz&gt;
Cc: Balbir Singh &lt;bsingharora@gmail.com&gt;
Cc: KAMEZAWA Hiroyuki &lt;kamezawa.hiroyu@jp.fujitsu.com&gt;
Cc: Konstantin Khlebnikov &lt;khlebnikov@openvz.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>mm: mempolicy: fix mbind_range() &amp;&amp; vma_adjust() interaction</title>
<updated>2013-08-04T08:51:14+00:00</updated>
<author>
<name>Oleg Nesterov</name>
<email>oleg@redhat.com</email>
</author>
<published>2013-07-31T20:53:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0bd6f78c3016704d2b6978eab835dcd0759dca36'/>
<id>0bd6f78c3016704d2b6978eab835dcd0759dca36</id>
<content type='text'>
commit 3964acd0dbec123aa0a621973a2a0580034b4788 upstream.

vma_adjust() does vma_set_policy(vma, vma_policy(next)) and this
is doubly wrong:

1. This leaks vma-&gt;vm_policy if it is not NULL and not equal to
   next-&gt;vm_policy.

   This can happen if vma_merge() expands "area", not prev (case 8).

2. This sets the wrong policy if vma_merge() joins prev and area,
   area is the vma the caller needs to update and it still has the
   old policy.

Revert commit 1444f92c8498 ("mm: merging memory blocks resets
mempolicy") which introduced these problems.

Change mbind_range() to recheck mpol_equal() after vma_merge() to fix
the problem that commit tried to address.

Signed-off-by: Oleg Nesterov &lt;oleg@redhat.com&gt;
Acked-by: KOSAKI Motohiro &lt;kosaki.motohiro@jp.fujitsu.com&gt;
Cc: Steven T Hampson &lt;steven.t.hampson@intel.com&gt;
Cc: Mel Gorman &lt;mgorman@suse.de&gt;
Cc: KOSAKI Motohiro &lt;kosaki.motohiro@jp.fujitsu.com&gt;
Cc: Rik van Riel &lt;riel@redhat.com&gt;
Cc: Andi Kleen &lt;andi@firstfloor.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 3964acd0dbec123aa0a621973a2a0580034b4788 upstream.

vma_adjust() does vma_set_policy(vma, vma_policy(next)) and this
is doubly wrong:

1. This leaks vma-&gt;vm_policy if it is not NULL and not equal to
   next-&gt;vm_policy.

   This can happen if vma_merge() expands "area", not prev (case 8).

2. This sets the wrong policy if vma_merge() joins prev and area,
   area is the vma the caller needs to update and it still has the
   old policy.

Revert commit 1444f92c8498 ("mm: merging memory blocks resets
mempolicy") which introduced these problems.

Change mbind_range() to recheck mpol_equal() after vma_merge() to fix
the problem that commit tried to address.

Signed-off-by: Oleg Nesterov &lt;oleg@redhat.com&gt;
Acked-by: KOSAKI Motohiro &lt;kosaki.motohiro@jp.fujitsu.com&gt;
Cc: Steven T Hampson &lt;steven.t.hampson@intel.com&gt;
Cc: Mel Gorman &lt;mgorman@suse.de&gt;
Cc: KOSAKI Motohiro &lt;kosaki.motohiro@jp.fujitsu.com&gt;
Cc: Rik van Riel &lt;riel@redhat.com&gt;
Cc: Andi Kleen &lt;andi@firstfloor.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>mm: fix the TLB range flushed when __tlb_remove_page() runs out of slots</title>
<updated>2013-08-04T08:50:32+00:00</updated>
<author>
<name>Vineet Gupta</name>
<email>Vineet.Gupta1@synopsys.com</email>
</author>
<published>2013-07-03T22:03:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=78077c226f0ab20fcd0a85a8f0de42b96973382b'/>
<id>78077c226f0ab20fcd0a85a8f0de42b96973382b</id>
<content type='text'>
commit e6c495a96ce02574e765d5140039a64c8d4e8c9e upstream.

zap_pte_range loops from @addr to @end.  In the middle, if it runs out of
batching slots, TLB entries needs to be flushed for @start to @interim,
NOT @interim to @end.

Since ARC port doesn't use page free batching I can't test it myself but
this seems like the right thing to do.

Observed this when working on a fix for the issue at thread:
http://www.spinics.net/lists/linux-arch/msg21736.html

Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Cc: Mel Gorman &lt;mgorman@suse.de&gt;
Cc: Hugh Dickins &lt;hughd@google.com&gt;
Cc: Rik van Riel &lt;riel@redhat.com&gt;
Cc: David Rientjes &lt;rientjes@google.com&gt;
Cc: Peter Zijlstra &lt;peterz@infradead.org&gt;
Acked-by: Catalin Marinas &lt;catalin.marinas@arm.com&gt;
Cc: Max Filippov &lt;jcmvbkbc@gmail.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit e6c495a96ce02574e765d5140039a64c8d4e8c9e upstream.

zap_pte_range loops from @addr to @end.  In the middle, if it runs out of
batching slots, TLB entries needs to be flushed for @start to @interim,
NOT @interim to @end.

Since ARC port doesn't use page free batching I can't test it myself but
this seems like the right thing to do.

Observed this when working on a fix for the issue at thread:
http://www.spinics.net/lists/linux-arch/msg21736.html

Signed-off-by: Vineet Gupta &lt;vgupta@synopsys.com&gt;
Cc: Mel Gorman &lt;mgorman@suse.de&gt;
Cc: Hugh Dickins &lt;hughd@google.com&gt;
Cc: Rik van Riel &lt;riel@redhat.com&gt;
Cc: David Rientjes &lt;rientjes@google.com&gt;
Cc: Peter Zijlstra &lt;peterz@infradead.org&gt;
Acked-by: Catalin Marinas &lt;catalin.marinas@arm.com&gt;
Cc: Max Filippov &lt;jcmvbkbc@gmail.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>mm/memory-hotplug: fix lowmem count overflow when offline pages</title>
<updated>2013-07-22T01:21:36+00:00</updated>
<author>
<name>Wanpeng Li</name>
<email>liwanp@linux.vnet.ibm.com</email>
</author>
<published>2013-07-03T22:02:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7642257802319a58c118649e20ad5c7ee0d663f3'/>
<id>7642257802319a58c118649e20ad5c7ee0d663f3</id>
<content type='text'>
commit cea27eb2a202959783f81254c48c250ddd80e129 upstream.

The logic for the memory-remove code fails to correctly account the
Total High Memory when a memory block which contains High Memory is
offlined as shown in the example below.  The following patch fixes it.

Before logic memory remove:

MemTotal:        7603740 kB
MemFree:         6329612 kB
Buffers:           94352 kB
Cached:           872008 kB
SwapCached:            0 kB
Active:           626932 kB
Inactive:         519216 kB
Active(anon):     180776 kB
Inactive(anon):   222944 kB
Active(file):     446156 kB
Inactive(file):   296272 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:       7294672 kB
HighFree:        5704696 kB
LowTotal:         309068 kB
LowFree:          624916 kB

After logic memory remove:

MemTotal:        7079452 kB
MemFree:         5805976 kB
Buffers:           94372 kB
Cached:           872000 kB
SwapCached:            0 kB
Active:           626936 kB
Inactive:         519236 kB
Active(anon):     180780 kB
Inactive(anon):   222944 kB
Active(file):     446156 kB
Inactive(file):   296292 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:       7294672 kB
HighFree:        5181024 kB
LowTotal:       4294752076 kB
LowFree:          624952 kB

[mhocko@suse.cz: fix CONFIG_HIGHMEM=n build]
Signed-off-by: Wanpeng Li &lt;liwanp@linux.vnet.ibm.com&gt;
Reviewed-by: Michal Hocko &lt;mhocko@suse.cz&gt;
Cc: KAMEZAWA Hiroyuki &lt;kamezawa.hiroyu@jp.fujitsu.com&gt;
Cc: David Rientjes &lt;rientjes@google.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit cea27eb2a202959783f81254c48c250ddd80e129 upstream.

The logic for the memory-remove code fails to correctly account the
Total High Memory when a memory block which contains High Memory is
offlined as shown in the example below.  The following patch fixes it.

Before logic memory remove:

MemTotal:        7603740 kB
MemFree:         6329612 kB
Buffers:           94352 kB
Cached:           872008 kB
SwapCached:            0 kB
Active:           626932 kB
Inactive:         519216 kB
Active(anon):     180776 kB
Inactive(anon):   222944 kB
Active(file):     446156 kB
Inactive(file):   296272 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:       7294672 kB
HighFree:        5704696 kB
LowTotal:         309068 kB
LowFree:          624916 kB

After logic memory remove:

MemTotal:        7079452 kB
MemFree:         5805976 kB
Buffers:           94372 kB
Cached:           872000 kB
SwapCached:            0 kB
Active:           626936 kB
Inactive:         519236 kB
Active(anon):     180780 kB
Inactive(anon):   222944 kB
Active(file):     446156 kB
Inactive(file):   296292 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:       7294672 kB
HighFree:        5181024 kB
LowTotal:       4294752076 kB
LowFree:          624952 kB

[mhocko@suse.cz: fix CONFIG_HIGHMEM=n build]
Signed-off-by: Wanpeng Li &lt;liwanp@linux.vnet.ibm.com&gt;
Reviewed-by: Michal Hocko &lt;mhocko@suse.cz&gt;
Cc: KAMEZAWA Hiroyuki &lt;kamezawa.hiroyu@jp.fujitsu.com&gt;
Cc: David Rientjes &lt;rientjes@google.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>memcg, kmem: fix reference count handling on the error path</title>
<updated>2013-07-22T01:21:36+00:00</updated>
<author>
<name>Michal Hocko</name>
<email>mhocko@suse.cz</email>
</author>
<published>2013-07-08T23:00:29+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=71a429cf00c7ff8da3fc3356617987e746055c00'/>
<id>71a429cf00c7ff8da3fc3356617987e746055c00</id>
<content type='text'>
commit f37a96914d1aea10fed8d9af10251f0b9caea31b upstream.

mem_cgroup_css_online calls mem_cgroup_put if memcg_init_kmem fails.
This is not correct because only memcg_propagate_kmem takes an
additional reference while mem_cgroup_sockets_init is allowed to fail as
well (although no current implementation fails) but it doesn't take any
reference.  This all suggests that it should be memcg_propagate_kmem
that should clean up after itself so this patch moves mem_cgroup_put
over there.

Unfortunately this is not that easy (as pointed out by Li Zefan) because
memcg_kmem_mark_dead marks the group dead (KMEM_ACCOUNTED_DEAD) if it is
marked active (KMEM_ACCOUNTED_ACTIVE) which is the case even if
memcg_propagate_kmem fails so the additional reference is dropped in
that case in kmem_cgroup_destroy which means that the reference would be
dropped two times.

The easiest way then would be to simply remove mem_cgrroup_put from
mem_cgroup_css_online and rely on kmem_cgroup_destroy doing the right
thing.

Signed-off-by: Michal Hocko &lt;mhocko@suse.cz&gt;
Signed-off-by: Li Zefan &lt;lizefan@huawei.com&gt;
Acked-by: KAMEZAWA Hiroyuki &lt;kamezawa.hiroyu@jp.fujitsu.com&gt;
Cc: Hugh Dickins &lt;hughd@google.com&gt;
Cc: Tejun Heo &lt;tj@kernel.org&gt;
Cc: Glauber Costa &lt;glommer@openvz.org&gt;
Cc: Johannes Weiner &lt;hannes@cmpxchg.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit f37a96914d1aea10fed8d9af10251f0b9caea31b upstream.

mem_cgroup_css_online calls mem_cgroup_put if memcg_init_kmem fails.
This is not correct because only memcg_propagate_kmem takes an
additional reference while mem_cgroup_sockets_init is allowed to fail as
well (although no current implementation fails) but it doesn't take any
reference.  This all suggests that it should be memcg_propagate_kmem
that should clean up after itself so this patch moves mem_cgroup_put
over there.

Unfortunately this is not that easy (as pointed out by Li Zefan) because
memcg_kmem_mark_dead marks the group dead (KMEM_ACCOUNTED_DEAD) if it is
marked active (KMEM_ACCOUNTED_ACTIVE) which is the case even if
memcg_propagate_kmem fails so the additional reference is dropped in
that case in kmem_cgroup_destroy which means that the reference would be
dropped two times.

The easiest way then would be to simply remove mem_cgrroup_put from
mem_cgroup_css_online and rely on kmem_cgroup_destroy doing the right
thing.

Signed-off-by: Michal Hocko &lt;mhocko@suse.cz&gt;
Signed-off-by: Li Zefan &lt;lizefan@huawei.com&gt;
Acked-by: KAMEZAWA Hiroyuki &lt;kamezawa.hiroyu@jp.fujitsu.com&gt;
Cc: Hugh Dickins &lt;hughd@google.com&gt;
Cc: Tejun Heo &lt;tj@kernel.org&gt;
Cc: Glauber Costa &lt;glommer@openvz.org&gt;
Cc: Johannes Weiner &lt;hannes@cmpxchg.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>slab: fix init_lock_keys</title>
<updated>2013-07-22T01:21:26+00:00</updated>
<author>
<name>Christoph Lameter</name>
<email>cl@linux.com</email>
</author>
<published>2013-07-02T19:12:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=002b98a8495089379af21689688ad575d90bd8d4'/>
<id>002b98a8495089379af21689688ad575d90bd8d4</id>
<content type='text'>
commit 0f8f8094d28eb53368ac09186ea6b3a324cc7d44 upstream.

Some architectures (e.g. powerpc built with CONFIG_PPC_256K_PAGES=y
CONFIG_FORCE_MAX_ZONEORDER=11) get PAGE_SHIFT + MAX_ORDER &gt; 26.

In 3.10 kernels, CONFIG_LOCKDEP=y with PAGE_SHIFT + MAX_ORDER &gt; 26 makes
init_lock_keys() dereference beyond kmalloc_caches[26].
This leads to an unbootable system (kernel panic at initializing SLAB)
if one of kmalloc_caches[26...PAGE_SHIFT+MAX_ORDER-1] is not NULL.

Fix this by making sure that init_lock_keys() does not dereference beyond
kmalloc_caches[26] arrays.

Signed-off-by: Christoph Lameter &lt;cl@linux.com&gt;
Reported-by: Tetsuo Handa &lt;penguin-kernel@I-Love.SAKURA.ne.jp&gt;
Cc: Pekka Enberg &lt;penberg@kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Pekka Enberg &lt;penberg@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 0f8f8094d28eb53368ac09186ea6b3a324cc7d44 upstream.

Some architectures (e.g. powerpc built with CONFIG_PPC_256K_PAGES=y
CONFIG_FORCE_MAX_ZONEORDER=11) get PAGE_SHIFT + MAX_ORDER &gt; 26.

In 3.10 kernels, CONFIG_LOCKDEP=y with PAGE_SHIFT + MAX_ORDER &gt; 26 makes
init_lock_keys() dereference beyond kmalloc_caches[26].
This leads to an unbootable system (kernel panic at initializing SLAB)
if one of kmalloc_caches[26...PAGE_SHIFT+MAX_ORDER-1] is not NULL.

Fix this by making sure that init_lock_keys() does not dereference beyond
kmalloc_caches[26] arrays.

Signed-off-by: Christoph Lameter &lt;cl@linux.com&gt;
Reported-by: Tetsuo Handa &lt;penguin-kernel@I-Love.SAKURA.ne.jp&gt;
Cc: Pekka Enberg &lt;penberg@kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Pekka Enberg &lt;penberg@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>Revert "memcg: avoid dangling reference count in creation failure"</title>
<updated>2013-07-13T18:42:27+00:00</updated>
<author>
<name>Michal Hocko</name>
<email>mhocko@suse.cz</email>
</author>
<published>2013-07-08T23:00:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9cafb55474a872531d0b9bf429346912ae5f1153'/>
<id>9cafb55474a872531d0b9bf429346912ae5f1153</id>
<content type='text'>
commit fa460c2d37870e0a6f94c70e8b76d05ca11b6db0 upstream.

This reverts commit e4715f01be697a.

mem_cgroup_put is hierarchy aware so mem_cgroup_put(memcg) already drops
an additional reference from all parents so the additional
mem_cgrroup_put(parent) potentially causes use-after-free.

Signed-off-by: Michal Hocko &lt;mhocko@suse.cz&gt;
Signed-off-by: Li Zefan &lt;lizefan@huawei.com&gt;
Acked-by: KAMEZAWA Hiroyuki &lt;kamezawa.hiroyu@jp.fujitsu.com&gt;
Cc: Hugh Dickins &lt;hughd@google.com&gt;
Cc: Tejun Heo &lt;tj@kernel.org&gt;
Cc: Glauber Costa &lt;glommer@openvz.org&gt;
Cc: Johannes Weiner &lt;hannes@cmpxchg.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit fa460c2d37870e0a6f94c70e8b76d05ca11b6db0 upstream.

This reverts commit e4715f01be697a.

mem_cgroup_put is hierarchy aware so mem_cgroup_put(memcg) already drops
an additional reference from all parents so the additional
mem_cgrroup_put(parent) potentially causes use-after-free.

Signed-off-by: Michal Hocko &lt;mhocko@suse.cz&gt;
Signed-off-by: Li Zefan &lt;lizefan@huawei.com&gt;
Acked-by: KAMEZAWA Hiroyuki &lt;kamezawa.hiroyu@jp.fujitsu.com&gt;
Cc: Hugh Dickins &lt;hughd@google.com&gt;
Cc: Tejun Heo &lt;tj@kernel.org&gt;
Cc: Glauber Costa &lt;glommer@openvz.org&gt;
Cc: Johannes Weiner &lt;hannes@cmpxchg.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>futex: Take hugepages into account when generating futex_key</title>
<updated>2013-07-13T18:42:26+00:00</updated>
<author>
<name>Zhang Yi</name>
<email>wetpzy@gmail.com</email>
</author>
<published>2013-06-25T13:19:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=ab1842f10b18f847893dad5bfe513f1392cbe797'/>
<id>ab1842f10b18f847893dad5bfe513f1392cbe797</id>
<content type='text'>
commit 13d60f4b6ab5b702dc8d2ee20999f98a93728aec upstream.

The futex_keys of process shared futexes are generated from the page
offset, the mapping host and the mapping index of the futex user space
address. This should result in an unique identifier for each futex.

Though this is not true when futexes are located in different subpages
of an hugepage. The reason is, that the mapping index for all those
futexes evaluates to the index of the base page of the hugetlbfs
mapping. So a futex at offset 0 of the hugepage mapping and another
one at offset PAGE_SIZE of the same hugepage mapping have identical
futex_keys. This happens because the futex code blindly uses
page-&gt;index.

Steps to reproduce the bug:

1. Map a file from hugetlbfs. Initialize pthread_mutex1 at offset 0
   and pthread_mutex2 at offset PAGE_SIZE of the hugetlbfs
   mapping.

   The mutexes must be initialized as PTHREAD_PROCESS_SHARED because
   PTHREAD_PROCESS_PRIVATE mutexes are not affected by this issue as
   their keys solely depend on the user space address.

2. Lock mutex1 and mutex2

3. Create thread1 and in the thread function lock mutex1, which
   results in thread1 blocking on the locked mutex1.

4. Create thread2 and in the thread function lock mutex2, which
   results in thread2 blocking on the locked mutex2.

5. Unlock mutex2. Despite the fact that mutex2 got unlocked, thread2
   still blocks on mutex2 because the futex_key points to mutex1.

To solve this issue we need to take the normal page index of the page
which contains the futex into account, if the futex is in an hugetlbfs
mapping. In other words, we calculate the normal page mapping index of
the subpage in the hugetlbfs mapping.

Mappings which are not based on hugetlbfs are not affected and still
use page-&gt;index.

Thanks to Mel Gorman who provided a patch for adding proper evaluation
functions to the hugetlbfs code to avoid exposing hugetlbfs specific
details to the futex code.

[ tglx: Massaged changelog ]

Signed-off-by: Zhang Yi &lt;zhang.yi20@zte.com.cn&gt;
Reviewed-by: Jiang Biao &lt;jiang.biao2@zte.com.cn&gt;
Tested-by: Ma Chenggong &lt;ma.chenggong@zte.com.cn&gt;
Reviewed-by: 'Mel Gorman' &lt;mgorman@suse.de&gt;
Acked-by: 'Darren Hart' &lt;dvhart@linux.intel.com&gt;
Cc: 'Peter Zijlstra' &lt;peterz@infradead.org&gt;
Link: http://lkml.kernel.org/r/000101ce71a6%24a83c5880%24f8b50980%24@com
Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 13d60f4b6ab5b702dc8d2ee20999f98a93728aec upstream.

The futex_keys of process shared futexes are generated from the page
offset, the mapping host and the mapping index of the futex user space
address. This should result in an unique identifier for each futex.

Though this is not true when futexes are located in different subpages
of an hugepage. The reason is, that the mapping index for all those
futexes evaluates to the index of the base page of the hugetlbfs
mapping. So a futex at offset 0 of the hugepage mapping and another
one at offset PAGE_SIZE of the same hugepage mapping have identical
futex_keys. This happens because the futex code blindly uses
page-&gt;index.

Steps to reproduce the bug:

1. Map a file from hugetlbfs. Initialize pthread_mutex1 at offset 0
   and pthread_mutex2 at offset PAGE_SIZE of the hugetlbfs
   mapping.

   The mutexes must be initialized as PTHREAD_PROCESS_SHARED because
   PTHREAD_PROCESS_PRIVATE mutexes are not affected by this issue as
   their keys solely depend on the user space address.

2. Lock mutex1 and mutex2

3. Create thread1 and in the thread function lock mutex1, which
   results in thread1 blocking on the locked mutex1.

4. Create thread2 and in the thread function lock mutex2, which
   results in thread2 blocking on the locked mutex2.

5. Unlock mutex2. Despite the fact that mutex2 got unlocked, thread2
   still blocks on mutex2 because the futex_key points to mutex1.

To solve this issue we need to take the normal page index of the page
which contains the futex into account, if the futex is in an hugetlbfs
mapping. In other words, we calculate the normal page mapping index of
the subpage in the hugetlbfs mapping.

Mappings which are not based on hugetlbfs are not affected and still
use page-&gt;index.

Thanks to Mel Gorman who provided a patch for adding proper evaluation
functions to the hugetlbfs code to avoid exposing hugetlbfs specific
details to the futex code.

[ tglx: Massaged changelog ]

Signed-off-by: Zhang Yi &lt;zhang.yi20@zte.com.cn&gt;
Reviewed-by: Jiang Biao &lt;jiang.biao2@zte.com.cn&gt;
Tested-by: Ma Chenggong &lt;ma.chenggong@zte.com.cn&gt;
Reviewed-by: 'Mel Gorman' &lt;mgorman@suse.de&gt;
Acked-by: 'Darren Hart' &lt;dvhart@linux.intel.com&gt;
Cc: 'Peter Zijlstra' &lt;peterz@infradead.org&gt;
Link: http://lkml.kernel.org/r/000101ce71a6%24a83c5880%24f8b50980%24@com
Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux</title>
<updated>2013-06-18T16:27:47+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-06-18T16:27:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=4c3577c58f7efcddeaa269e7ddbe75e8acfbb7de'/>
<id>4c3577c58f7efcddeaa269e7ddbe75e8acfbb7de</id>
<content type='text'>
Pull SLAB fix from Pekka Enberg:
 "A slab regression fix by Sasha Levin"

* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  slab: prevent warnings when allocating with __GFP_NOWARN
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull SLAB fix from Pekka Enberg:
 "A slab regression fix by Sasha Levin"

* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  slab: prevent warnings when allocating with __GFP_NOWARN
</pre>
</div>
</content>
</entry>
</feed>
