linux-stable.git/mm/vmscan.c, branch linux-4.2.y

vmscan: fix increasing nr_isolated incurred by putback unevictable pages

2015-09-29T17:33:32+00:00

commit c54839a722a02818677bcabe57e957f0ce4f841d upstream.

reclaim_clean_pages_from_list() assumes that shrink_page_list() returns
number of pages removed from the candidate list.  But shrink_page_list()
puts back mlocked pages without passing it to caller and without
counting as nr_reclaimed.  This increases nr_isolated.

To fix this, this patch changes shrink_page_list() to pass unevictable
pages back to caller.  Caller will take care those pages.

Minchan said:

It fixes two issues.

1. With unevictable page, cma_alloc will be successful.

Exactly speaking, cma_alloc of current kernel will fail due to
unevictable pages.

2. fix leaking of NR_ISOLATED counter of vmstat

With it, too_many_isolated works.  Otherwise, it could make hang until
the process get SIGKILL.

Signed-off-by: Jaewon Kim 
Acked-by: Minchan Kim 
Cc: Mel Gorman 
Acked-by: Vlastimil Babka 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm, vmscan: Do not wait for page writeback for GFP_NOFS allocations

2015-08-05T08:49:38+00:00

Nikolay has reported a hang when a memcg reclaim got stuck with the
following backtrace:

PID: 18308  TASK: ffff883d7c9b0a30  CPU: 1   COMMAND: "rsync"
  #0 __schedule at ffffffff815ab152
  #1 schedule at ffffffff815ab76e
  #2 schedule_timeout at ffffffff815ae5e5
  #3 io_schedule_timeout at ffffffff815aad6a
  #4 bit_wait_io at ffffffff815abfc6
  #5 __wait_on_bit at ffffffff815abda5
  #6 wait_on_page_bit at ffffffff8111fd4f
  #7 shrink_page_list at ffffffff81135445
  #8 shrink_inactive_list at ffffffff81135845
  #9 shrink_lruvec at ffffffff81135ead
 #10 shrink_zone at ffffffff811360c3
 #11 shrink_zones at ffffffff81136eff
 #12 do_try_to_free_pages at ffffffff8113712f
 #13 try_to_free_mem_cgroup_pages at ffffffff811372be
 #14 try_charge at ffffffff81189423
 #15 mem_cgroup_try_charge at ffffffff8118c6f5
 #16 __add_to_page_cache_locked at ffffffff8112137d
 #17 add_to_page_cache_lru at ffffffff81121618
 #18 pagecache_get_page at ffffffff8112170b
 #19 grow_dev_page at ffffffff811c8297
 #20 __getblk_slow at ffffffff811c91d6
 #21 __getblk_gfp at ffffffff811c92c1
 #22 ext4_ext_grow_indepth at ffffffff8124565c
 #23 ext4_ext_create_new_leaf at ffffffff81246ca8
 #24 ext4_ext_insert_extent at ffffffff81246f09
 #25 ext4_ext_map_blocks at ffffffff8124a848
 #26 ext4_map_blocks at ffffffff8121a5b7
 #27 mpage_map_one_extent at ffffffff8121b1fa
 #28 mpage_map_and_submit_extent at ffffffff8121f07b
 #29 ext4_writepages at ffffffff8121f6d5
 #30 do_writepages at ffffffff8112c490
 #31 __filemap_fdatawrite_range at ffffffff81120199
 #32 filemap_flush at ffffffff8112041c
 #33 ext4_alloc_da_blocks at ffffffff81219da1
 #34 ext4_rename at ffffffff81229b91
 #35 ext4_rename2 at ffffffff81229e32
 #36 vfs_rename at ffffffff811a08a5
 #37 SYSC_renameat2 at ffffffff811a3ffc
 #38 sys_renameat2 at ffffffff811a408e
 #39 sys_rename at ffffffff8119e51e
 #40 system_call_fastpath at ffffffff815afa89

Dave Chinner has properly pointed out that this is a deadlock in the
reclaim code because ext4 doesn't submit pages which are marked by
PG_writeback right away.

The heuristic was introduced by commit e62e384e9da8 ("memcg: prevent OOM
with too many dirty pages") and it was applied only when may_enter_fs
was specified.  The code has been changed by c3b94f44fcb0 ("memcg:
further prevent OOM with too many dirty pages") which has removed the
__GFP_FS restriction with a reasoning that we do not get into the fs
code.  But this is not sufficient apparently because the fs doesn't
necessarily submit pages marked PG_writeback for IO right away.

ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily
submit the bio.  Instead it tries to map more pages into the bio and
mpage_map_one_extent might trigger memcg charge which might end up
waiting on a page which is marked PG_writeback but hasn't been submitted
yet so we would end up waiting for something that never finishes.

Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2)
before we go to wait on the writeback.  The page fault path, which is
the only path that triggers memcg oom killer since 3.12, shouldn't
require GFP_NOFS and so we shouldn't reintroduce the premature OOM
killer issue which was originally addressed by the heuristic.

As per David Chinner the xfs is doing similar thing since 2.6.15 already
so ext4 is not the only affected filesystem.  Moreover he notes:

: For example: IO completion might require unwritten extent conversion
: which executes filesystem transactions and GFP_NOFS allocations. The
: writeback flag on the pages can not be cleared until unwritten
: extent conversion completes. Hence memory reclaim cannot wait on
: page writeback to complete in GFP_NOFS context because it is not
: safe to do so, memcg reclaim or otherwise.

Cc: stable@vger.kernel.org # 3.9+
[tytso@mit.edu: corrected the control flow]
Fixes: c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages")
Reported-by: Nikolay Borisov 
Signed-off-by: Michal Hocko 
Signed-off-by: Hugh Dickins 
Signed-off-by: Linus Torvalds

Merge branch 'for-4.2/writeback' of git://git.kernel.dk/linux-block

2015-06-25T23:00:17+00:00

Pull cgroup writeback support from Jens Axboe:
 "This is the big pull request for adding cgroup writeback support.

  This code has been in development for a long time, and it has been
  simmering in for-next for a good chunk of this cycle too.  This is one
  of those problems that has been talked about for at least half a
  decade, finally there's a solution and code to go with it.

  Also see last weeks writeup on LWN:

        http://lwn.net/Articles/648292/"

* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
  writeback, blkio: add documentation for cgroup writeback support
  vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
  writeback: do foreign inode detection iff cgroup writeback is enabled
  v9fs: fix error handling in v9fs_session_init()
  bdi: fix wrong error return value in cgwb_create()
  buffer: remove unusued 'ret' variable
  writeback: disassociate inodes from dying bdi_writebacks
  writeback: implement foreign cgroup inode bdi_writeback switching
  writeback: add lockdep annotation to inode_to_wb()
  writeback: use unlocked_inode_to_wb transaction in inode_congested()
  writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
  writeback: implement [locked_]inode_to_wb_and_lock_list()
  writeback: implement foreign cgroup inode detection
  writeback: make writeback_control track the inode being written back
  writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
  mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
  writeback: implement memcg writeback domain based throttling
  writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
  writeback: implement memcg wb_domain
  writeback: update wb_over_bg_thresh() to use wb_domain aware operations
  ...

mm: rename RECLAIM_SWAP to RECLAIM_UNMAP

2015-06-25T00:49:42+00:00

The name SWAP implies that we are dealing with anonymous pages only.  In
fact, the original patch that introduced the min_unmapped_ratio logic
was to fix an issue related to file pages.  Rename it to RECLAIM_UNMAP
to match what does.

Historically, commit a6dc60f8975a ("vmscan: rename sc.may_swap to
may_unmap") renamed .may_swap to .may_unmap, leaving RECLAIM_SWAP
behind.  commit 2e2e42598908 ("vmscan,memcg: reintroduce sc->may_swap")
reintroduced .may_swap for memory controller.

Signed-off-by: Zhihui Zhang 
Cc: Johannes Weiner 
Cc: Mel Gorman 
Cc: Rik van Riel 
Cc: Michal Hocko 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: vmscan: do not throttle based on pfmemalloc reserves if node has no reclaimable pages

2015-06-25T00:49:42+00:00

Based upon 675becce15 ("mm: vmscan: do not throttle based on pfmemalloc
reserves if node has no ZONE_NORMAL") from Mel.

We have a system with the following topology:

# numactl -H
available: 3 nodes (0,2-3)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
23 24 25 26 27 28 29 30 31
node 0 size: 28273 MB
node 0 free: 27323 MB
node 2 cpus:
node 2 size: 16384 MB
node 2 free: 0 MB
node 3 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
node 3 size: 30533 MB
node 3 free: 13273 MB
node distances:
node   0   2   3
  0:  10  20  20
  2:  20  10  20
  3:  20  20  10

Node 2 has no free memory, because:
# cat /sys/devices/system/node/node2/hugepages/hugepages-16777216kB/nr_hugepages
1

This leads to the following zoneinfo:

Node 2, zone      DMA
  pages free     0
        min      1840
        low      2300
        high     2760
        scanned  0
        spanned  262144
        present  262144
        managed  262144
...
  all_unreclaimable: 1

If one then attempts to allocate some normal 16M hugepages via

echo 37 > /proc/sys/vm/nr_hugepages

The echo never returns and kswapd2 consumes CPU cycles.

This is because throttle_direct_reclaim ends up calling
wait_event(pfmemalloc_wait, pfmemalloc_watermark_ok...).
pfmemalloc_watermark_ok() in turn checks all zones on the node if there
are any reserves, and if so, then indicates the watermarks are ok, by
seeing if there are sufficient free pages.

675becce15 added a condition already for memoryless nodes.  In this case,
though, the node has memory, it is just all consumed (and not
reclaimable).  Effectively, though, the result is the same on this call to
pfmemalloc_watermark_ok() and thus seems like a reasonable additional
condition.

With this change, the afore-mentioned 16M hugepage allocation attempt
succeeds and correctly round-robins between Nodes 1 and 3.

Signed-off-by: Nishanth Aravamudan 
Reviewed-by: Michal Hocko 
Acked-by: Vlastimil Babka 
Cc: Dave Hansen 
Cc: Mel Gorman 
Cc: Anton Blanchard 
Cc: Johannes Weiner 
Cc: Michal Hocko 
Cc: Rik van Riel 
Cc: Dan Streetman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use

2015-06-02T14:38:13+00:00

Because writeback wasn't cgroup aware before, the usual dirty
throttling mechanism in balance_dirty_pages() didn't work for
processes under memcg limit.  The writeback path didn't know how much
memory is available or how fast the dirty pages are being written out
for a given memcg and balance_dirty_pages() didn't have any measure of
IO back pressure for the memcg.

To work around the issue, memcg implemented an ad-hoc dirty throttling
mechanism in the direct reclaim path by stalling on pages under
writeback which are encountered during direct reclaim scan.  This is
rather ugly and crude - none of the configurability, fairness, or
bandwidth-proportional distribution of the normal path.

The previous patches implemented proper memcg aware dirty throttling
when cgroup writeback is in use making the ad-hoc mechanism
unnecessary.  This patch disables direct reclaim stalling for such
case.

Note: I disabled the parts which seemed obvious and it behaves fine
      while testing but my understanding of this code path is
      rudimentary and it's quite possible that I got something wrong.
      Please let me know if I got some wrong or more global_reclaim()
      sites should be updated.

v2: The original patch removed the direct stalling mechanism which
    breaks legacy hierarchies.  Conditionalize instead of removing.

Signed-off-by: Tejun Heo 
Cc: Jens Axboe 
Cc: Jan Kara 
Cc: Wu Fengguang 
Cc: Greg Thelen 
Cc: Vladimir Davydov 
Signed-off-by: Jens Axboe

writeback: implement and use inode_congested()

2015-06-02T14:33:35+00:00

In several places, bdi_congested() and its wrappers are used to
determine whether more IOs should be issued.  With cgroup writeback
support, this question can't be answered solely based on the bdi
(backing_dev_info).  It's dependent on whether the filesystem and bdi
support cgroup writeback and the blkcg the inode is associated with.

This patch implements inode_congested() and its wrappers which take
@inode and determines the congestion state considering cgroup
writeback.  The new functions replace bdi_*congested() calls in places
where the query is about specific inode and task.

There are several filesystem users which also fit this criteria but
they should be updated when each filesystem implements cgroup
writeback support.

v2: Now that a given inode is associated with only one wb, congestion
    state can be determined independent from the asking task.  Drop
    @task.  Spotted by Vivek.  Also, converted to take @inode instead
    of @mapping and renamed to inode_congested().

Signed-off-by: Tejun Heo 
Cc: Jens Axboe 
Cc: Jan Kara 
Cc: Vivek Goyal 
Signed-off-by: Jens Axboe

memcg: add per cgroup dirty page accounting

2015-06-02T14:33:33+00:00

When modifying PG_Dirty on cached file pages, update the new
MEM_CGROUP_STAT_DIRTY counter.  This is done in the same places where
global NR_FILE_DIRTY is managed.  The new memcg stat is visible in the
per memcg memory.stat cgroupfs file.  The most recent past attempt at
this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632

The new accounting supports future efforts to add per cgroup dirty
page throttling and writeback.  It also helps an administrator break
down a container's memory usage and provides evidence to understand
memcg oom kills (the new dirty count is included in memcg oom kill
messages).

The ability to move page accounting between memcg
(memory.move_charge_at_immigrate) makes this accounting more
complicated than the global counter.  The existing
mem_cgroup_{begin,end}_page_stat() lock is used to serialize move
accounting with stat updates.
Typical update operation:
	memcg = mem_cgroup_begin_page_stat(page)
	if (TestSetPageDirty()) {
		[...]
		mem_cgroup_update_page_stat(memcg)
	}
	mem_cgroup_end_page_stat(memcg)

Summary of mem_cgroup_end_page_stat() overhead:
- Without CONFIG_MEMCG it's a no-op
- With CONFIG_MEMCG and no inter memcg task movement, it's just
  rcu_read_lock()
- With CONFIG_MEMCG and inter memcg  task movement, it's
  rcu_read_lock() + spin_lock_irqsave()

A memcg parameter is added to several routines because their callers
now grab mem_cgroup_begin_page_stat() which returns the memcg later
needed by for mem_cgroup_update_page_stat().

Because mem_cgroup_begin_page_stat() may disable interrupts, some
adjustments are needed:
- move __mark_inode_dirty() from __set_page_dirty() to its caller.
  __mark_inode_dirty() locking does not want interrupts disabled.
- use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in
  __delete_from_page_cache(), replace_page_cache_page(),
  invalidate_complete_page2(), and __remove_mapping().

   text    data     bss      dec    hex filename
8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before
8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after
                            +192 text bytes
8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before
8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after
                            +773 text bytes

Performance tests run on v4.0-rc1-36-g4f671fe2f952.  Lower is better for
all metrics, they're all wall clock or cycle counts.  The read and write
fault benchmarks just measure fault time, they do not include I/O time.

* CONFIG_MEMCG not set:
                            baseline                              patched
  kbuild                 1m25.030000(+-0.088% 3 samples)       1m25.426667(+-0.120% 3 samples)
  dd write 100 MiB          0.859211561 +-15.10%                  0.874162885 +-15.03%
  dd write 200 MiB          1.670653105 +-17.87%                  1.669384764 +-11.99%
  dd write 1000 MiB         8.434691190 +-14.15%                  8.474733215 +-14.77%
  read fault cycles       254.0(+-0.000% 10 samples)            253.0(+-0.000% 10 samples)
  write fault cycles     2021.2(+-3.070% 10 samples)           1984.5(+-1.036% 10 samples)

* CONFIG_MEMCG=y root_memcg:
                            baseline                              patched
  kbuild                 1m25.716667(+-0.105% 3 samples)       1m25.686667(+-0.153% 3 samples)
  dd write 100 MiB          0.855650830 +-14.90%                  0.887557919 +-14.90%
  dd write 200 MiB          1.688322953 +-12.72%                  1.667682724 +-13.33%
  dd write 1000 MiB         8.418601605 +-14.30%                  8.673532299 +-15.00%
  read fault cycles       266.0(+-0.000% 10 samples)            266.0(+-0.000% 10 samples)
  write fault cycles     2051.7(+-1.349% 10 samples)           2049.6(+-1.686% 10 samples)

* CONFIG_MEMCG=y non-root_memcg:
                            baseline                              patched
  kbuild                 1m26.120000(+-0.273% 3 samples)       1m25.763333(+-0.127% 3 samples)
  dd write 100 MiB          0.861723964 +-15.25%                  0.818129350 +-14.82%
  dd write 200 MiB          1.669887569 +-13.30%                  1.698645885 +-13.27%
  dd write 1000 MiB         8.383191730 +-14.65%                  8.351742280 +-14.52%
  read fault cycles       265.7(+-0.172% 10 samples)            267.0(+-0.000% 10 samples)
  write fault cycles     2070.6(+-1.512% 10 samples)           2084.4(+-2.148% 10 samples)

As expected anon page faults are not affected by this patch.

tj: Updated to apply on top of the recent cancel_dirty_page() changes.

Signed-off-by: Sha Zhengju 
Signed-off-by: Greg Thelen 
Signed-off-by: Tejun Heo 
Signed-off-by: Jens Axboe

Merge branch 'akpm' (patches from Andrew)

2015-02-13T02:54:28+00:00

Merge third set of updates from Andrew Morton:

 - the rest of MM

   [ This includes getting rid of the numa hinting bits, in favor of
     just generic protnone logic.  Yay.     - Linus ]

 - core kernel

 - procfs

 - some of lib/ (lots of lib/ material this time)

* emailed patches from Andrew Morton : (104 commits)
  lib/lcm.c: replace include
  lib/percpu_ida.c: remove redundant includes
  lib/strncpy_from_user.c: replace module.h include
  lib/stmp_device.c: replace module.h include
  lib/sort.c: move include inside #if 0
  lib/show_mem.c: remove redundant include
  lib/radix-tree.c: change to simpler include
  lib/plist.c: remove redundant include
  lib/nlattr.c: remove redundant include
  lib/kobject_uevent.c: remove redundant include
  lib/llist.c: remove redundant include
  lib/md5.c: simplify include
  lib/list_sort.c: rearrange includes
  lib/genalloc.c: remove redundant include
  lib/idr.c: remove redundant include
  lib/halfmd4.c: simplify includes
  lib/dynamic_queue_limits.c: simplify includes
  lib/sort.c: use simpler includes
  lib/interval_tree.c: simplify includes
  hexdump: make it return number of bytes placed in buffer
  ...

vmscan: per memory cgroup slab shrinkers

2015-02-13T02:54:09+00:00

This patch adds SHRINKER_MEMCG_AWARE flag.  If a shrinker has this flag
set, it will be called per memory cgroup.  The memory cgroup to scan
objects from is passed in shrink_control->memcg.  If the memory cgroup
is NULL, a memcg aware shrinker is supposed to scan objects from the
global list.  Unaware shrinkers are only called on global pressure with
memcg=NULL.

Signed-off-by: Vladimir Davydov 
Cc: Dave Chinner 
Cc: Johannes Weiner 
Cc: Michal Hocko 
Cc: Greg Thelen 
Cc: Glauber Costa 
Cc: Alexander Viro 
Cc: Christoph Lameter 
Cc: Pekka Enberg 
Cc: David Rientjes 
Cc: Joonsoo Kim 
Cc: Tejun Heo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds