linux-stable.git/mm/slob.c, branch linux-4.2.y

slob: make slob_alloc_node() static and remove EXPORT_SYMBOL()

2015-04-14T23:48:59+00:00

slob_alloc_node() is only used in slob.c.  Remove the EXPORT_SYMBOL and
make slob_alloc_node() static.

Signed-off-by: Fabian Frederick 
Cc: Christoph Lameter 
Cc: Pekka Enberg 
Cc: David Rientjes 
Cc: Joonsoo Kim 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

slub: make dead caches discard free slabs immediately

2015-02-13T02:54:10+00:00

To speed up further allocations SLUB may store empty slabs in per cpu/node
partial lists instead of freeing them immediately.  This prevents per
memcg caches destruction, because kmem caches created for a memory cgroup
are only destroyed after the last page charged to the cgroup is freed.

To fix this issue, this patch resurrects approach first proposed in [1].
It forbids SLUB to cache empty slabs after the memory cgroup that the
cache belongs to was destroyed.  It is achieved by setting kmem_cache's
cpu_partial and min_partial constants to 0 and tuning put_cpu_partial() so
that it would drop frozen empty slabs immediately if cpu_partial = 0.

The runtime overhead is minimal.  From all the hot functions, we only
touch relatively cold put_cpu_partial(): we make it call
unfreeze_partials() after freezing a slab that belongs to an offline
memory cgroup.  Since slab freezing exists to avoid moving slabs from/to a
partial list on free/alloc, and there can't be allocations from dead
caches, it shouldn't cause any overhead.  We do have to disable preemption
for put_cpu_partial() to achieve that though.

The original patch was accepted well and even merged to the mm tree.
However, I decided to withdraw it due to changes happening to the memcg
core at that time.  I had an idea of introducing per-memcg shrinkers for
kmem caches, but now, as memcg has finally settled down, I do not see it
as an option, because SLUB shrinker would be too costly to call since SLUB
does not keep free slabs on a separate list.  Besides, we currently do not
even call per-memcg shrinkers for offline memcgs.  Overall, it would
introduce much more complexity to both SLUB and memcg than this small
patch.

Regarding to SLAB, there's no problem with it, because it shrinks
per-cpu/node caches periodically.  Thanks to list_lru reparenting, we no
longer keep entries for offline cgroups in per-memcg arrays (such as
memcg_cache_params->memcg_caches), so we do not have to bother if a
per-memcg cache will be shrunk a bit later than it could be.

[1] http://thread.gmane.org/gmane.linux.kernel.mm/118649/focus=118650

Signed-off-by: Vladimir Davydov 
Cc: Christoph Lameter 
Cc: Pekka Enberg 
Cc: David Rientjes 
Cc: Joonsoo Kim 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/sl[ao]b: always track caller in kmalloc_(node_)track_caller()

2014-10-10T02:25:50+00:00

Now, we track caller if tracing or slab debugging is enabled.  If they are
disabled, we could save one argument passing overhead by calling
__kmalloc(_node)().  But, I think that it would be marginal.  Furthermore,
default slab allocator, SLUB, doesn't use this technique so I think that
it's okay to change this situation.

After this change, we can turn on/off CONFIG_DEBUG_SLAB without full
kernel build and remove some complicated '#if' defintion.  It looks more
benefitial to me.

Signed-off-by: Joonsoo Kim 
Acked-by: Christoph Lameter 
Cc: Pekka Enberg 
Cc: David Rientjes 
Cc: Zhang Yanfei 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

slab: get_online_mems for kmem_cache_{create,destroy,shrink}

2014-06-04T23:53:59+00:00

When we create a sl[au]b cache, we allocate kmem_cache_node structures
for each online NUMA node.  To handle nodes taken online/offline, we
register memory hotplug notifier and allocate/free kmem_cache_node
corresponding to the node that changes its state for each kmem cache.

To synchronize between the two paths we hold the slab_mutex during both
the cache creationg/destruction path and while tuning per-node parts of
kmem caches in memory hotplug handler, but that's not quite right,
because it does not guarantee that a newly created cache will have all
kmem_cache_nodes initialized in case it races with memory hotplug.  For
instance, in case of slub:

    CPU0                            CPU1
    ----                            ----
    kmem_cache_create:              online_pages:
     __kmem_cache_create:            slab_memory_callback:
                                      slab_mem_going_online_callback:
                                       lock slab_mutex
                                       for each slab_caches list entry
                                           allocate kmem_cache node
                                       unlock slab_mutex
      lock slab_mutex
      init_kmem_cache_nodes:
       for_each_node_state(node, N_NORMAL_MEMORY)
           allocate kmem_cache node
      add kmem_cache to slab_caches list
      unlock slab_mutex
                                    online_pages (continued):
                                     node_states_set_node

As a result we'll get a kmem cache with not all kmem_cache_nodes
allocated.

To avoid issues like that we should hold get/put_online_mems() during
the whole kmem cache creation/destruction/shrink paths, just like we
deal with cpu hotplug.  This patch does the trick.

Note, that after it's applied, there is no need in taking the slab_mutex
for kmem_cache_shrink any more, so it is removed from there.

Signed-off-by: Vladimir Davydov 
Cc: Christoph Lameter 
Cc: Pekka Enberg 
Cc: Tang Chen 
Cc: Zhang Yanfei 
Cc: Toshi Kani 
Cc: Xishi Qiu 
Cc: Jiang Liu 
Cc: Rafael J. Wysocki 
Cc: David Rientjes 
Cc: Wen Congyang 
Cc: Yasuaki Ishimatsu 
Cc: Lai Jiangshan 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: slab/slub: use page->list consistently instead of page->lru

2014-04-11T07:06:06+00:00

'struct page' has two list_head fields: 'lru' and 'list'.  Conveniently,
they are unioned together.  This means that code can use them
interchangably, which gets horribly confusing like with this nugget from
slab.c:

>	list_del(&page->lru);
>	if (page->active == cachep->num)
>		list_add(&page->list, &n->slabs_full);

This patch makes the slab and slub code use page->lru universally instead
of mixing ->list and ->lru.

So, the new rule is: page->lru is what the you use if you want to keep
your page on a list.  Don't like the fact that it's not called ->list?
Too bad.

Signed-off-by: Dave Hansen 
Acked-by: Christoph Lameter 
Acked-by: David Rientjes 
Cc: Pekka Enberg 
Signed-off-by: Andrew Morton 
Signed-off-by: Pekka Enberg

mm/sl[aou]b: Move kmallocXXX functions to common code

2013-09-04T17:51:33+00:00

The kmalloc* functions of all slab allcoators are similar now so
lets move them into slab.h. This requires some function naming changes
in slob.

As a results of this patch there is a common set of functions for
all allocators. Also means that kmalloc_large() is now available
in general to perform large order allocations that go directly
via the page allocator. kmalloc_large() can be substituted if
kmalloc() throws warnings because of too large allocations.

kmalloc_large() has exactly the same semantics as kmalloc but
can only used for allocations > PAGE_SIZE.

Signed-off-by: Christoph Lameter 
Signed-off-by: Pekka Enberg

Merge branch 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux

2013-07-14T22:14:29+00:00

Pull slab update from Pekka Enberg:
 "Highlights:

  - Fix for boot-time problems on some architectures due to
    init_lock_keys() not respecting kmalloc_caches boundaries
    (Christoph Lameter)

  - CONFIG_SLUB_CPU_PARTIAL requested by RT folks (Joonsoo Kim)

  - Fix for excessive slab freelist draining (Wanpeng Li)

  - SLUB and SLOB cleanups and fixes (various people)"

I ended up editing the branch, and this avoids two commits at the end
that were immediately reverted, and I instead just applied the oneliner
fix in between myself.

* 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux
  slub: Check for page NULL before doing the node_match check
  mm/slab: Give s_next and s_stop slab-specific names
  slob: Check for NULL pointer before calling ctor()
  slub: Make cpu partial slab support configurable
  slab: add kmalloc() to kernel API documentation
  slab: fix init_lock_keys
  slob: use DIV_ROUND_UP where possible
  slub: do not put a slab to cpu partial list when cpu_partial is 0
  mm/slub: Use node_nr_slabs and node_nr_objs in get_slabinfo
  mm/slub: Drop unnecessary nr_partials
  mm/slab: Fix /proc/slabinfo unwriteable for slab
  mm/slab: Sharing s_next and s_stop between slab and slub
  mm/slab: Fix drain freelist excessively
  slob: Rework #ifdeffery in slab.h
  mm, slab: moved kmem_cache_alloc_node comment to correct place

slob: Check for NULL pointer before calling ctor()

2013-07-07T16:19:23+00:00

While doing some code inspection, I noticed that the slob constructor
method can be called with a NULL pointer. If memory is tight and slob
fails to allocate with slob_alloc() or slob_new_pages() it still calls
the ctor() method with a NULL pointer. Looking at the first ctor()
method I found, I noticed that it can not handle a NULL pointer (I'm
sure others probably can't either):

static void sighand_ctor(void *data)
{
        struct sighand_struct *sighand = data;

        spin_lock_init(&sighand->siglock);
        init_waitqueue_head(&sighand->signalfd_wqh);
}

The solution is to only call the ctor() method if allocation succeeded.

Acked-by: Christoph Lameter 
Signed-off-by: Steven Rostedt 
Signed-off-by: Pekka Enberg

slob: use DIV_ROUND_UP where possible

2013-07-07T15:50:05+00:00

Acked-by: Christoph Lameter 
Signed-off-by: Sasha Levin 
Signed-off-by: Pekka Enberg

mm: rename page struct field helpers

2013-02-24T01:50:18+00:00

The function names page_xchg_last_nid(), page_last_nid() and
reset_page_last_nid() were judged to be inconsistent so rename them to a
struct_field_op style pattern.  As it looked jarring to have
reset_page_mapcount() and page_nid_reset_last() beside each other in
memmap_init_zone(), this patch also renames reset_page_mapcount() to
page_mapcount_reset().  There are others like init_page_count() but as
it is used throughout the arch code a rename would likely cause more
conflicts than it is worth.

[akpm@linux-foundation.org: fix zcache]
Signed-off-by: Mel Gorman 
Suggested-by: Andrew Morton 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds