linux-stable.git/mm/page_alloc.c, branch v4.17.3

mm, page_alloc: do not break __GFP_THISNODE by zonelist reset

2018-06-25T23:51:32+00:00

commit 7810e6781e0fcbca78b91cf65053f895bf59e85f upstream.

In __alloc_pages_slowpath() we reset zonelist and preferred_zoneref for
allocations that can ignore memory policies.  The zonelist is obtained
from current CPU's node.  This is a problem for __GFP_THISNODE
allocations that want to allocate on a different node, e.g.  because the
allocating thread has been migrated to a different CPU.

This has been observed to break SLAB in our 4.4-based kernel, because
there it relies on __GFP_THISNODE working as intended.  If a slab page
is put on wrong node's list, then further list manipulations may corrupt
the list because page_to_nid() is used to determine which node's
list_lock should be locked and thus we may take a wrong lock and race.

Current SLAB implementation seems to be immune by luck thanks to commit
511e3a058812 ("mm/slab: make cache_grow() handle the page allocated on
arbitrary node") but there may be others assuming that __GFP_THISNODE
works as promised.

We can fix it by simply removing the zonelist reset completely.  There
is actually no reason to reset it, because memory policies and cpusets
don't affect the zonelist choice in the first place.  This was different
when commit 183f6371aac2 ("mm: ignore mempolicies when using
ALLOC_NO_WATERMARK") introduced the code, as mempolicies provided their
own restricted zonelists.

We might consider this for 4.17 although I don't know if there's
anything currently broken.

SLAB is currently not affected, but in kernels older than 4.7 that don't
yet have 511e3a058812 ("mm/slab: make cache_grow() handle the page
allocated on arbitrary node") it is.  That's at least 4.4 LTS.  Older
ones I'll have to check.

So stable backports should be more important, but will have to be
reviewed carefully, as the code went through many changes.  BTW I think
that also the ac->preferred_zoneref reset is currently useless if we
don't also reset ac->nodemask from a mempolicy to NULL first (which we
probably should for the OOM victims etc?), but I would leave that for a
separate patch.

Link: http://lkml.kernel.org/r/20180525130853.13915-1-vbabka@suse.cz
Signed-off-by: Vlastimil Babka 
Fixes: 183f6371aac2 ("mm: ignore mempolicies when using ALLOC_NO_WATERMARK")
Acked-by: Mel Gorman 
Cc: Michal Hocko 
Cc: David Rientjes 
Cc: Joonsoo Kim 
Cc: Vlastimil Babka 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm, memory_hotplug: make has_unmovable_pages more robust

2018-05-26T01:12:11+00:00

Oscar has reported:
: Due to an unfortunate setting with movablecore, memblocks containing bootmem
: memory (pages marked by get_page_bootmem()) ended up marked in zone_movable.
: So while trying to remove that memory, the system failed in do_migrate_range
: and __offline_pages never returned.
:
: This can be reproduced by running
: qemu-system-x86_64 -m 6G,slots=8,maxmem=8G -numa node,mem=4096M -numa node,mem=2048M
: and movablecore=4G kernel command line
:
: linux kernel: BIOS-provided physical RAM map:
: linux kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
: linux kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
: linux kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
: linux kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
: linux kernel: BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
: linux kernel: BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
: linux kernel: BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
: linux kernel: BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
: linux kernel: NX (Execute Disable) protection: active
: linux kernel: SMBIOS 2.8 present.
: linux kernel: DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org
: linux kernel: Hypervisor detected: KVM
: linux kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
: linux kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
: linux kernel: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
:
: linux kernel: SRAT: PXM 0 -> APIC 0x00 -> Node 0
: linux kernel: SRAT: PXM 1 -> APIC 0x01 -> Node 1
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
: linux kernel: ACPI: SRAT: Node 1 PXM 1 [mem 0x140000000-0x1bfffffff]
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x1c0000000-0x43fffffff] hotplug
: linux kernel: NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x0
: linux kernel: NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0
: linux kernel: NODE_DATA(0) allocated [mem 0x13ffd6000-0x13fffffff]
: linux kernel: NODE_DATA(1) allocated [mem 0x1bffd3000-0x1bfffcfff]
:
: zoneinfo shows that the zone movable is placed into both numa nodes:
: Node 0, zone  Movable
:   pages free     160140
:         min      1823
:         low      2278
:         high     2733
:         spanned  262144
:         present  262144
:         managed  245670
: Node 1, zone  Movable
:   pages free     448427
:         min      3827
:         low      4783
:         high     5739
:         spanned  524288
:         present  524288
:         managed  515766

Note how only Node 0 has a hutplugable memory region which would rule it
out from the early memblock allocations (most likely memmap).  Node1
will surely contain memmaps on the same node and those would prevent
offlining to succeed.  So this is arguably a configuration issue.
Although one could argue that we should be more clever and rule early
allocations from the zone movable.  This would be correct but probably
not worth the effort considering what a hack movablecore is.

Anyway, We could do better for those cases though.  We rely on
start_isolate_page_range resp.  has_unmovable_pages to do their job.
The first one isolates the whole range to be offlined so that we do not
allocate from it anymore and the later makes sure we are not stumbling
over non-migrateable pages.

has_unmovable_pages is overly optimistic, however.  It doesn't check all
the pages if we are withing zone_movable because we rely that those
pages will be always migrateable.  As it turns out we are still not
perfect there.  While bootmem pages in zonemovable sound like a clear
bug which should be fixed let's remove the optimization for now and warn
if we encounter unmovable pages in zone_movable in the meantime.  That
should help for now at least.

Btw.  this wasn't a real problem until commit 72b39cfc4d75 ("mm,
memory_hotplug: do not fail offlining too early") because we used to
have a small number of retries and then failed.  This turned out to be
too fragile though.

Link: http://lkml.kernel.org/r/20180523125555.30039-2-mhocko@kernel.org
Signed-off-by: Michal Hocko 
Reported-by: Oscar Salvador 
Tested-by: Oscar Salvador 
Reviewed-by: Pavel Tatashin 
Cc: Vlastimil Babka 
Cc: Reza Arbab 
Cc: Igor Mammedov 
Cc: Vitaly Kuznetsov 
Cc: Anshuman Khandual 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Revert "mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLE"

2018-05-24T17:07:50+00:00

This reverts the following commits that change CMA design in MM.

 3d2054ad8c2d ("ARM: CMA: avoid double mapping to the CMA area if CONFIG_HIGHMEM=y")

 1d47a3ec09b5 ("mm/cma: remove ALLOC_CMA")

 bad8c6c0b114 ("mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLE")

Ville reported a following error on i386.

  Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  microcode: microcode updated early to revision 0x4, date = 2013-06-28
  Initializing CPU#0
  Initializing HighMem for node 0 (000377fe:00118000)
  Initializing Movable for node 0 (00000001:00118000)
  BUG: Bad page state in process swapper  pfn:377fe
  page:f53effc0 count:0 mapcount:-127 mapping:00000000 index:0x0
  flags: 0x80000000()
  raw: 80000000 00000000 00000000 ffffff80 00000000 00000100 00000200 00000001
  page dumped because: nonzero mapcount
  Modules linked in:
  CPU: 0 PID: 0 Comm: swapper Not tainted 4.17.0-rc5-elk+ #145
  Hardware name: Dell Inc. Latitude E5410/03VXMC, BIOS A15 07/11/2013
  Call Trace:
   dump_stack+0x60/0x96
   bad_page+0x9a/0x100
   free_pages_check_bad+0x3f/0x60
   free_pcppages_bulk+0x29d/0x5b0
   free_unref_page_commit+0x84/0xb0
   free_unref_page+0x3e/0x70
   __free_pages+0x1d/0x20
   free_highmem_page+0x19/0x40
   add_highpages_with_active_regions+0xab/0xeb
   set_highmem_pages_init+0x66/0x73
   mem_init+0x1b/0x1d7
   start_kernel+0x17a/0x363
   i386_start_kernel+0x95/0x99
   startup_32_smp+0x164/0x168

The reason for this error is that the span of MOVABLE_ZONE is extended
to whole node span for future CMA initialization, and, normal memory is
wrongly freed here.  I submitted the fix and it seems to work, but,
another problem happened.

It's so late time to fix the later problem so I decide to reverting the
series.

Reported-by: Ville Syrjälä 
Acked-by: Laura Abbott 
Acked-by: Michal Hocko 
Cc: Andrew Morton 
Signed-off-by: Joonsoo Kim 
Signed-off-by: Linus Torvalds

xen, mm: allow deferred page initialization for xen pv domains

2018-04-11T17:28:38+00:00

Juergen Gross noticed that commit f7f99100d8d ("mm: stop zeroing memory
during allocation in vmemmap") broke XEN PV domains when deferred struct
page initialization is enabled.

This is because the xen's PagePinned() flag is getting erased from
struct pages when they are initialized later in boot.

Juergen fixed this problem by disabling deferred pages on xen pv
domains.  It is desirable, however, to have this feature available as it
reduces boot time.  This fix re-enables the feature for pv-dmains, and
fixes the problem the following way:

The fix is to delay setting PagePinned flag until struct pages for all
allocated memory are initialized, i.e.  until after free_all_bootmem().

A new x86_init.hyper op init_after_bootmem() is called to let xen know
that boot allocator is done, and hence struct pages for all the
allocated memory are now initialized.  If deferred page initialization
is enabled, the rest of struct pages are going to be initialized later
in boot once page_alloc_init_late() is called.

xen_after_bootmem() walks page table's pages and marks them pinned.

Link: http://lkml.kernel.org/r/20180226160112.24724-2-pasha.tatashin@oracle.com
Signed-off-by: Pavel Tatashin 
Acked-by: Ingo Molnar 
Reviewed-by: Juergen Gross 
Tested-by: Juergen Gross 
Cc: Daniel Jordan 
Cc: Pavel Tatashin 
Cc: Alok Kataria 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Boris Ostrovsky 
Cc: Michal Hocko 
Cc: Vlastimil Babka 
Cc: Andy Lutomirski 
Cc: Laura Abbott 
Cc: Kirill A. Shutemov 
Cc: Borislav Petkov 
Cc: Mathias Krause 
Cc: Jinbum Park 
Cc: Dan Williams 
Cc: Baoquan He 
Cc: Jia Zhang 
Cc: Mel Gorman 
Cc: Johannes Weiner 
Cc: Stefano Stabellini 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/cma: remove ALLOC_CMA

2018-04-11T17:28:32+00:00

Now, all reserved pages for CMA region are belong to the ZONE_MOVABLE
and it only serves for a request with GFP_HIGHMEM && GFP_MOVABLE.

Therefore, we don't need to maintain ALLOC_CMA at all.

Link: http://lkml.kernel.org/r/1512114786-5085-3-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim 
Reviewed-by: Aneesh Kumar K.V 
Tested-by: Tony Lindgren 
Acked-by: Vlastimil Babka 
Cc: Johannes Weiner 
Cc: Laura Abbott 
Cc: Marek Szyprowski 
Cc: Mel Gorman 
Cc: Michal Hocko 
Cc: Michal Nazarewicz 
Cc: Minchan Kim 
Cc: Rik van Riel 
Cc: Russell King 
Cc: Will Deacon 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLE

2018-04-11T17:28:32+00:00

Patch series "mm/cma: manage the memory of the CMA area by using the
ZONE_MOVABLE", v2.

0. History

This patchset is the follow-up of the discussion about the "Introduce
ZONE_CMA (v7)" [1].  Please reference it if more information is needed.

1. What does this patch do?

This patch changes the management way for the memory of the CMA area in
the MM subsystem.  Currently the memory of the CMA area is managed by
the zone where their pfn is belong to.  However, this approach has some
problems since MM subsystem doesn't have enough logic to handle the
situation that different characteristic memories are in a single zone.
To solve this issue, this patch try to manage all the memory of the CMA
area by using the MOVABLE zone.  In MM subsystem's point of view,
characteristic of the memory on the MOVABLE zone and the memory of the
CMA area are the same.  So, managing the memory of the CMA area by using
the MOVABLE zone will not have any problem.

2. Motivation

There are some problems with current approach.  See following.  Although
these problem would not be inherent and it could be fixed without this
conception change, it requires many hooks addition in various code path
and it would be intrusive to core MM and would be really error-prone.
Therefore, I try to solve them with this new approach.  Anyway,
following is the problems of the current implementation.

o CMA memory utilization

First, following is the freepage calculation logic in MM.

 - For movable allocation: freepage = total freepage
 - For unmovable allocation: freepage = total freepage - CMA freepage

Freepages on the CMA area is used after the normal freepages in the zone
where the memory of the CMA area is belong to are exhausted.  At that
moment that the number of the normal freepages is zero, so

 - For movable allocation: freepage = total freepage = CMA freepage
 - For unmovable allocation: freepage = 0

If unmovable allocation comes at this moment, allocation request would
fail to pass the watermark check and reclaim is started.  After reclaim,
there would exist the normal freepages so freepages on the CMA areas
would not be used.

FYI, there is another attempt [2] trying to solve this problem in lkml.
And, as far as I know, Qualcomm also has out-of-tree solution for this
problem.

Useless reclaim:

There is no logic to distinguish CMA pages in the reclaim path.  Hence,
CMA page is reclaimed even if the system just needs the page that can be
usable for the kernel allocation.

Atomic allocation failure:

This is also related to the fallback allocation policy for the memory of
the CMA area.  Consider the situation that the number of the normal
freepages is *zero* since the bunch of the movable allocation requests
come.  Kswapd would not be woken up due to following freepage
calculation logic.

- For movable allocation: freepage = total freepage = CMA freepage

If atomic unmovable allocation request comes at this moment, it would
fails due to following logic.

- For unmovable allocation: freepage = total freepage - CMA freepage = 0

It was reported by Aneesh [3].

Useless compaction:

Usual high-order allocation request is unmovable allocation request and
it cannot be served from the memory of the CMA area.  In compaction,
migration scanner try to migrate the page in the CMA area and make
high-order page there.  As mentioned above, it cannot be usable for the
unmovable allocation request so it's just waste.

3. Current approach and new approach

Current approach is that the memory of the CMA area is managed by the
zone where their pfn is belong to.  However, these memory should be
distinguishable since they have a strong limitation.  So, they are
marked as MIGRATE_CMA in pageblock flag and handled specially.  However,
as mentioned in section 2, the MM subsystem doesn't have enough logic to
deal with this special pageblock so many problems raised.

New approach is that the memory of the CMA area is managed by the
MOVABLE zone.  MM already have enough logic to deal with special zone
like as HIGHMEM and MOVABLE zone.  So, managing the memory of the CMA
area by the MOVABLE zone just naturally work well because constraints
for the memory of the CMA area that the memory should always be
migratable is the same with the constraint for the MOVABLE zone.

There is one side-effect for the usability of the memory of the CMA
area.  The use of MOVABLE zone is only allowed for a request with
GFP_HIGHMEM && GFP_MOVABLE so now the memory of the CMA area is also
only allowed for this gfp flag.  Before this patchset, a request with
GFP_MOVABLE can use them.  IMO, It would not be a big issue since most
of GFP_MOVABLE request also has GFP_HIGHMEM flag.  For example, file
cache page and anonymous page.  However, file cache page for blockdev
file is an exception.  Request for it has no GFP_HIGHMEM flag.  There is
pros and cons on this exception.  In my experience, blockdev file cache
pages are one of the top reason that causes cma_alloc() to fail
temporarily.  So, we can get more guarantee of cma_alloc() success by
discarding this case.

Note that there is no change in admin POV since this patchset is just
for internal implementation change in MM subsystem.  Just one minor
difference for admin is that the memory stat for CMA area will be
printed in the MOVABLE zone.  That's all.

4. Result

Following is the experimental result related to utilization problem.

8 CPUs, 1024 MB, VIRTUAL MACHINE
make -j16


  CMA area:               0 MB            512 MB
  Elapsed-time:           92.4		186.5
  pswpin:                 82		18647
  pswpout:                160		69839


  CMA        :            0 MB            512 MB
  Elapsed-time:           93.1		93.4
  pswpin:                 84		46
  pswpout:                183		92

akpm: "kernel test robot" reported a 26% improvement in
vm-scalability.throughput:
http://lkml.kernel.org/r/20180330012721.GA3845@yexl-desktop

[1]: lkml.kernel.org/r/1491880640-9944-1-git-send-email-iamjoonsoo.kim@lge.com
[2]: https://lkml.org/lkml/2014/10/15/623
[3]: http://www.spinics.net/lists/linux-mm/msg100562.html

Link: http://lkml.kernel.org/r/1512114786-5085-2-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim 
Reviewed-by: Aneesh Kumar K.V 
Tested-by: Tony Lindgren 
Acked-by: Vlastimil Babka 
Cc: Johannes Weiner 
Cc: Laura Abbott 
Cc: Marek Szyprowski 
Cc: Mel Gorman 
Cc: Michal Hocko 
Cc: Michal Nazarewicz 
Cc: Minchan Kim 
Cc: Rik van Riel 
Cc: Russell King 
Cc: Will Deacon 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/page_alloc: don't reserve ZONE_HIGHMEM for ZONE_MOVABLE request

2018-04-11T17:28:32+00:00

Freepage on ZONE_HIGHMEM doesn't work for kernel memory so it's not that
important to reserve.  When ZONE_MOVABLE is used, this problem would
theorectically cause to decrease usable memory for GFP_HIGHUSER_MOVABLE
allocation request which is mainly used for page cache and anon page
allocation.  So, fix it by setting 0 to
sysctl_lowmem_reserve_ratio[ZONE_HIGHMEM].

And, defining sysctl_lowmem_reserve_ratio array by MAX_NR_ZONES - 1 size
makes code complex.  For example, if there is highmem system, following
reserve ratio is activated for *NORMAL ZONE* which would be easyily
misleading people.

 #ifdef CONFIG_HIGHMEM
 32
 #endif

This patch also fixes this situation by defining
sysctl_lowmem_reserve_ratio array by MAX_NR_ZONES and place "#ifdef" to
right place.

Link: http://lkml.kernel.org/r/1504672525-17915-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim 
Reviewed-by: Aneesh Kumar K.V 
Acked-by: Vlastimil Babka 
Tested-by: Tony Lindgren 
Cc: Michal Hocko 
Cc: Vlastimil Babka 
Cc: Mel Gorman 
Cc: Johannes Weiner 
Cc: "Aneesh Kumar K . V" 
Cc: Minchan Kim 
Cc: Rik van Riel 
Cc: Laura Abbott 
Cc: Marek Szyprowski 
Cc: Michal Nazarewicz 
Cc: Russell King 
Cc: Will Deacon 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: treat indirectly reclaimable memory as available in MemAvailable

2018-04-11T17:28:29+00:00

Adjust /proc/meminfo MemAvailable calculation by adding the amount of
indirectly reclaimable memory (rounded to the PAGE_SIZE).

Link: http://lkml.kernel.org/r/20180305133743.12746-4-guro@fb.com
Signed-off-by: Roman Gushchin 
Reviewed-by: Andrew Morton 
Cc: Alexander Viro 
Cc: Michal Hocko 
Cc: Johannes Weiner 
Cc: Mel Gorman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/page_isolation.c: make start_isolate_page_range() fail if already isolated

2018-04-06T04:36:27+00:00

start_isolate_page_range() is used to set the migrate type of a set of
pageblocks to MIGRATE_ISOLATE while attempting to start a migration
operation.  It assumes that only one thread is calling it for the
specified range.  This routine is used by CMA, memory hotplug and
gigantic huge pages.  Each of these users synchronize access to the
range within their subsystem.  However, two subsystems (CMA and gigantic
huge pages for example) could attempt operations on the same range.  If
this happens, one thread may 'undo' the work another thread is doing.
This can result in pageblocks being incorrectly left marked as
MIGRATE_ISOLATE and therefore not available for page allocation.

What is ideally needed is a way to synchronize access to a set of
pageblocks that are undergoing isolation and migration.  The only thing
we know about these pageblocks is that they are all in the same zone.  A
per-node mutex is too coarse as we want to allow multiple operations on
different ranges within the same zone concurrently.  Instead, we will
use the migration type of the pageblocks themselves as a form of
synchronization.

start_isolate_page_range sets the migration type on a set of page-
blocks going in order from the one associated with the smallest pfn to
the largest pfn.  The zone lock is acquired to check and set the
migration type.  When going through the list of pageblocks check if
MIGRATE_ISOLATE is already set.  If so, this indicates another thread is
working on this pageblock.  We know exactly which pageblocks we set, so
clean up by undo those and return -EBUSY.

This allows start_isolate_page_range to serve as a synchronization
mechanism and will allow for more general use of callers making use of
these interfaces.  Update comments in alloc_contig_range to reflect this
new functionality.

Each CPU holds the associated zone lock to modify or examine the
migration type of a pageblock.  And, it will only examine/update a
single pageblock per lock acquire/release cycle.

Link: http://lkml.kernel.org/r/20180309224731.16978-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz 
Reviewed-by: Andrew Morton 
Cc: KAMEZAWA Hiroyuki 
Cc: Luiz Capitulino 
Cc: Michal Nazarewicz 
Cc: Michal Hocko 
Cc: Vlastimil Babka 
Cc: Mel Gorman 
Cc: Johannes Weiner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm, page_alloc: wakeup kcompactd even if kswapd cannot free more memory

2018-04-06T04:36:27+00:00

Kswapd will not wakeup if per-zone watermarks are not failing or if too
many previous attempts at background reclaim have failed.

This can be true if there is a lot of free memory available.  For high-
order allocations, kswapd is responsible for waking up kcompactd for
background compaction.  If the zone is not below its watermarks or
reclaim has recently failed (lots of free memory, nothing left to
reclaim), kcompactd does not get woken up.

When __GFP_DIRECT_RECLAIM is not allowed, allow kcompactd to still be
woken up even if kswapd will not reclaim.  This allows high-order
allocations, such as thp, to still trigger background compaction even
when the zone has an abundance of free memory.

Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803111659420.209721@chino.kir.corp.google.com
Signed-off-by: David Rientjes 
Acked-by: Vlastimil Babka 
Cc: Mel Gorman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds