linux-stable.git/mm/page_alloc.c, branch v3.4.112

OOM, PM: OOM killed task shouldn't escape PM suspend

2015-02-02T09:04:55+00:00

commit 5695be142e203167e3cb515ef86a88424f3524eb upstream.

PM freezer relies on having all tasks frozen by the time devices are
getting frozen so that no task will touch them while they are getting
frozen. But OOM killer is allowed to kill an already frozen task in
order to handle OOM situtation. In order to protect from late wake ups
OOM killer is disabled after all tasks are frozen. This, however, still
keeps a window open when a killed task didn't manage to die by the time
freeze_processes finishes.

Reduce the race window by checking all tasks after OOM killer has been
disabled. This is still not race free completely unfortunately because
oom_killer_disable cannot stop an already ongoing OOM killer so a task
might still wake up from the fridge and get killed without
freeze_processes noticing. Full synchronization of OOM and freezer is,
however, too heavy weight for this highly unlikely case.

Introduce and check oom_kills counter which gets incremented early when
the allocator enters __alloc_pages_may_oom path and only check all the
tasks if the counter changes during the freezing attempt. The counter
is updated so early to reduce the race window since allocator checked
oom_killer_disabled which is set by PM-freezing code. A false positive
will push the PM-freezer into a slow path but that is not a big deal.

Changes since v1
- push the re-check loop out of freeze_processes into
  check_frozen_processes and invert the condition to make the code more
  readable as per Rafael

Fixes: f660daac474c6f (oom: thaw threads if oom killed thread is frozen before deferring)
Signed-off-by: Michal Hocko 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Zefan Li

mm, thp: do not allow thp faults to avoid cpuset restrictions

2014-08-07T19:00:10+00:00

commit b104a35d32025ca740539db2808aa3385d0f30eb upstream.

The page allocator relies on __GFP_WAIT to determine if ALLOC_CPUSET
should be set in allocflags.  ALLOC_CPUSET controls if a page allocation
should be restricted only to the set of allowed cpuset mems.

Transparent hugepages clears __GFP_WAIT when defrag is disabled to prevent
the fault path from using memory compaction or direct reclaim.  Thus, it
is unfairly able to allocate outside of its cpuset mems restriction as a
side-effect.

This patch ensures that ALLOC_CPUSET is only cleared when the gfp mask is
truly GFP_ATOMIC by verifying it is also not a thp allocation.

Signed-off-by: David Rientjes 
Reported-by: Alex Thorlton 
Tested-by: Alex Thorlton 
Cc: Bob Liu 
Cc: Dave Hansen 
Cc: Hedi Berriche 
Cc: Hugh Dickins 
Cc: Johannes Weiner 
Cc: Kirill A. Shutemov 
Cc: Mel Gorman 
Cc: Rik van Riel 
Cc: Srivatsa S. Bhat 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm: setup pageblock_order before it's used by sparsemem

2014-02-20T18:45:32+00:00

commit ca57df79d4f64e1a4886606af4289d40636189c5 upstream.

On architectures with CONFIG_HUGETLB_PAGE_SIZE_VARIABLE set, such as
Itanium, pageblock_order is a variable with default value of 0.  It's set
to the right value by set_pageblock_order() in function
free_area_init_core().

But pageblock_order may be used by sparse_init() before free_area_init_core()
is called along path:
sparse_init()
    ->sparse_early_usemaps_alloc_node()
	->usemap_size()
	    ->SECTION_BLOCKFLAGS_BITS
		->((1UL << (PFN_SECTION_SHIFT - pageblock_order)) *
NR_PAGEBLOCK_BITS)

The uninitialized pageblock_size will cause memory wasting because
usemap_size() returns a much bigger value then it's really needed.

For example, on an Itanium platform,
sparse_init() pageblock_order=0 usemap_size=24576
free_area_init_core() before pageblock_order=0, usemap_size=24576
free_area_init_core() after pageblock_order=12, usemap_size=8

That means 24K memory has been wasted for each section, so fix it by calling
set_pageblock_order() from sparse_init().

Signed-off-by: Xishi Qiu 
Signed-off-by: Jiang Liu 
Cc: Tony Luck 
Cc: Yinghai Lu 
Cc: KAMEZAWA Hiroyuki 
Cc: Benjamin Herrenschmidt 
Cc: KOSAKI Motohiro 
Cc: David Rientjes 
Cc: Keping Chen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Li Zefan 
Signed-off-by: Greg Kroah-Hartman

mm/page_alloc.c: remove pageblock_default_order()

2014-02-20T18:45:32+00:00

commit 955c1cd7401565671b064e499115344ec8067dfd upstream.

This has always been broken: one version takes an unsigned int and the
other version takes no arguments.  This bug was hidden because one
version of set_pageblock_order() was a macro which doesn't evaluate its
argument.

Simplify it all and remove pageblock_default_order() altogether.

Reported-by: rajman mekaco 
Cc: Mel Gorman 
Cc: KAMEZAWA Hiroyuki 
Cc: Tejun Heo 
Cc: Minchan Kim 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Li Zefan 
Signed-off-by: Greg Kroah-Hartman

mm, show_mem: suppress page counts in non-blockable contexts

2013-10-13T22:42:49+00:00

commit 4b59e6c4730978679b414a8da61514a2518da512 upstream.

On large systems with a lot of memory, walking all RAM to determine page
types may take a half second or even more.

In non-blockable contexts, the page allocator will emit a page allocation
failure warning unless __GFP_NOWARN is specified.  In such contexts, irqs
are typically disabled and such a lengthy delay may even result in NMI
watchdog timeouts.

To fix this, suppress the page walk in such contexts when printing the
page allocation failure warning.

Signed-off-by: David Rientjes 
Cc: Mel Gorman 
Acked-by: Michal Hocko 
Cc: Dave Hansen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Cc: Xishi Qiu 
Signed-off-by: Greg Kroah-Hartman

mm/memory-hotplug: fix lowmem count overflow when offline pages

2013-08-04T08:26:07+00:00

commit cea27eb2a202959783f81254c48c250ddd80e129 upstream.

The logic for the memory-remove code fails to correctly account the
Total High Memory when a memory block which contains High Memory is
offlined as shown in the example below.  The following patch fixes it.

Before logic memory remove:

MemTotal:        7603740 kB
MemFree:         6329612 kB
Buffers:           94352 kB
Cached:           872008 kB
SwapCached:            0 kB
Active:           626932 kB
Inactive:         519216 kB
Active(anon):     180776 kB
Inactive(anon):   222944 kB
Active(file):     446156 kB
Inactive(file):   296272 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:       7294672 kB
HighFree:        5704696 kB
LowTotal:         309068 kB
LowFree:          624916 kB

After logic memory remove:

MemTotal:        7079452 kB
MemFree:         5805976 kB
Buffers:           94372 kB
Cached:           872000 kB
SwapCached:            0 kB
Active:           626936 kB
Inactive:         519236 kB
Active(anon):     180780 kB
Inactive(anon):   222944 kB
Active(file):     446156 kB
Inactive(file):   296292 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:       7294672 kB
HighFree:        5181024 kB
LowTotal:       4294752076 kB
LowFree:          624952 kB

[mhocko@suse.cz: fix CONFIG_HIGHMEM=n build]
Signed-off-by: Wanpeng Li 
Reviewed-by: Michal Hocko 
Cc: KAMEZAWA Hiroyuki 
Cc: David Rientjes 
Cc: 	[2.6.24+]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Zhouping Liu 
Signed-off-by: Greg Kroah-Hartman

mm: fix pageblock bitmap allocation

2013-02-28T14:58:58+00:00

commit 7c45512df987c5619db041b5c9b80d281e26d3db upstream.

Commit c060f943d092 ("mm: use aligned zone start for pfn_to_bitidx
calculation") fixed out calculation of the index into the pageblock
bitmap when a !SPARSEMEM zome was not aligned to pageblock_nr_pages.

However, the _allocation_ of that bitmap had never taken this alignment
requirement into accout, so depending on the exact size and alignment of
the zone, the use of that index could then access past the allocation,
resulting in some very subtle memory corruption.

This was reported (and bisected) by Ingo Molnar: one of his random
config builds would hang with certain very specific kernel command line
options.

In the meantime, commit c060f943d092 has been marked for stable, so this
fix needs to be back-ported to the stable kernels that backported the
commit to use the right alignment.

Bisected-and-tested-by: Ingo Molnar 
Acked-by: Mel Gorman 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm: use aligned zone start for pfn_to_bitidx calculation

2013-01-17T16:50:43+00:00

commit c060f943d0929f3e429c5d9522290584f6281d6e upstream.

The current calculation in pfn_to_bitidx assumes that (pfn -
zone->zone_start_pfn) >> pageblock_order will return the same bit for
all pfn in a pageblock.  If zone_start_pfn is not aligned to
pageblock_nr_pages, this may not always be correct.

Consider the following with pageblock order = 10, zone start 2MB:

  pfn     | pfn - zone start | (pfn - zone start) >> page block order
  ----------------------------------------------------------------
  0x26000 | 0x25e00	   |  0x97
  0x26100 | 0x25f00	   |  0x97
  0x26200 | 0x26000	   |  0x98
  0x26300 | 0x26100	   |  0x98

This means that calling {get,set}_pageblock_migratetype on a single page
will not set the migratetype for the full block.  Fix this by rounding
down zone_start_pfn when doing the bitidx calculation.

For our use case, the effects of this bug were mostly tied to the fact
that CMA allocations would either take a long time or fail to happen.
Depending on the driver using CMA, this could result in anything from
visual glitches to application failures.

Signed-off-by: Laura Abbott 
Acked-by: Mel Gorman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm/page_alloc: fix the page address of higher page's buddy calculation

2012-10-02T17:30:05+00:00

commit 0ba8f2d59304dfe69b59c034de723ad80f7ab9ac upstream.

The heuristic method for buddy has been introduced since commit
43506fad21ca ("mm/page_alloc.c: simplify calculation of combined index
of adjacent buddy lists").  But the page address of higher page's buddy
was wrongly calculated, which will lead page_is_buddy to fail for ever.
IOW, the heuristic method would be disabled with the wrong page address
of higher page's buddy.

Calculating the page address of higher page's buddy should be based
higher_page with the offset between index of higher page and index of
higher page's buddy.

Signed-off-by: Haifeng Li 
Signed-off-by: Gavin Shan 
Reviewed-by: Michal Hocko 
Cc: KyongHo Cho 
Cc: Mel Gorman 
Cc: Minchan Kim 
Cc: Johannes Weiner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm: raise MemFree by reverting percpu_pagelist_fraction to 0

2012-05-11T16:23:39+00:00

Why is there less MemFree than there used to be?  It perturbed a test,
so I've just been bisecting linux-next, and now find the offender went
upstream yesterday.

Commit 93278814d359 "mm: fix division by 0 in percpu_pagelist_fraction()"
mistakenly initialized percpu_pagelist_fraction to the sysctl's minimum 8,
which leaves 1/8th of memory on percpu lists (on each cpu??); but most of
us expect it to be left unset at 0 (and it's not then used as a divisor).

  MemTotal: 8061476kB  8061476kB  8061476kB  8061476kB  8061476kB  8061476kB
  Repetitive test with percpu_pagelist_fraction 8:
  MemFree:  6948420kB  6237172kB  6949696kB  6840692kB  6949048kB  6862984kB
  Same test with percpu_pagelist_fraction back to 0:
  MemFree:  7945000kB  7944908kB  7948568kB  7949060kB  7948796kB  7948812kB

Signed-off-by: Hugh Dickins 
[ We really should fix the crazy sysctl interface too, but that's a
  separate thing - Linus ]
Signed-off-by: Linus Torvalds