linux-stable.git/mm/memory.c, branch v3.14.26

mm: softdirty: keep bit when zapping file pte

2014-10-05T21:52:21+00:00

commit dbab31aa2ceec2d201966fa0b552f151310ba5f4 upstream.

This fixes the same bug as b43790eedd31 ("mm: softdirty: don't forget to
save file map softdiry bit on unmap") and 9aed8614af5a ("mm/memory.c:
don't forget to set softdirty on file mapped fault") where the return
value of pte_*mksoft_dirty was being ignored.

To be sure that no other pte/pmd "mk" function return values were being
ignored, I annotated the functions in arch/x86/include/asm/pgtable.h
with __must_check and rebuilt.

The userspace effect of this bug is that the softdirty mark might be
lost if a file mapped pte get zapped.

Signed-off-by: Peter Feiner 
Acked-by: Cyrill Gorcunov 
Cc: Pavel Emelyanov 
Cc: Jamie Liu 
Cc: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm/numa: Remove BUG_ON() in __handle_mm_fault()

2014-07-09T18:18:29+00:00

commit 107437febd495a50e2cd09c81bbaa84d30e57b07 upstream.

Changing PTEs and PMDs to pte_numa & pmd_numa is done with the
mmap_sem held for reading, which means a pmd can be instantiated
and turned into a numa one while __handle_mm_fault() is examining
the value of old_pmd.

If that happens, __handle_mm_fault() should just return and let
the page fault retry, instead of throwing an oops. This is
handled by the test for pmd_trans_huge(*pmd) below.

Signed-off-by: Rik van Riel 
Reviewed-by: Naoya Horiguchi 
Reported-by: Sunil Pandey 
Signed-off-by: Peter Zijlstra 
Cc: Andrew Morton 
Cc: Johannes Weiner 
Cc: Kirill A. Shutemov 
Cc: Linus Torvalds 
Cc: Mel Gorman 
Cc: linux-mm@kvack.org
Cc: lwoodman@redhat.com
Cc: dave.hansen@intel.com
Link: http://lkml.kernel.org/r/20140429153615.2d72098e@annuminas.surriel.com
Signed-off-by: Ingo Molnar 
Patrick McLean 
Signed-off-by: Greg Kroah-Hartman

mm: make fixup_user_fault() check the vma access rights too

2014-06-07T17:28:08+00:00

commit 1b17844b29ae042576bea588164f2f1e9590a8bc upstream.

fixup_user_fault() is used by the futex code when the direct user access
fails, and the futex code wants it to either map in the page in a usable
form or return an error.  It relied on handle_mm_fault() to map the
page, and correctly checked the error return from that, but while that
does map the page, it doesn't actually guarantee that the page will be
mapped with sufficient permissions to be then accessed.

So do the appropriate tests of the vma access rights by hand.

[ Side note: arguably handle_mm_fault() could just do that itself, but
  we have traditionally done it in the caller, because some callers -
  notably get_user_pages() - have been able to access pages even when
  they are mapped with PROT_NONE.  Maybe we should re-visit that design
  decision, but in the meantime this is the minimal patch. ]

Found by Dave Jones running his trinity tool.

Reported-by: Dave Jones 
Acked-by: Hugh Dickins 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm, thp: fix infinite loop on memcg OOM

2014-02-25T23:25:44+00:00

Masayoshi Mizuma reported a bug with the hang of an application under
the memcg limit.  It happens on write-protection fault to huge zero page

If we successfully allocate a huge page to replace zero page but hit the
memcg limit we need to split the zero page with split_huge_page_pmd()
and fallback to small pages.

The other part of the problem is that VM_FAULT_OOM has special meaning
in do_huge_pmd_wp_page() context.  __handle_mm_fault() expects the page
to be split if it sees VM_FAULT_OOM and it will will retry page fault
handling.  This causes an infinite loop if the page was not split.

do_huge_pmd_wp_zero_page_fallback() can return VM_FAULT_OOM if it failed
to allocate one small page, so fallback to small pages will not help.

The solution for this part is to replace VM_FAULT_OOM with
VM_FAULT_FALLBACK is fallback required.

Signed-off-by: Kirill A. Shutemov 
Reported-by: Masayoshi Mizuma 
Reviewed-by: Michal Hocko 
Cc: Johannes Weiner 
Cc: Andrea Arcangeli 
Cc: David Rientjes 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm, hwpoison: release page on PageHWPoison() in __do_fault()

2014-02-25T23:25:42+00:00

It seems we forget to release page after detecting HW error.

Signed-off-by: Kirill A. Shutemov 
Cc: Mel Gorman 
Cc: Rik van Riel 
Cc: Andi Kleen 
Cc: Matthew Wilcox 
Cc: Dave Hansen 
Cc: Naoya Horiguchi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: dump page when hitting a VM_BUG_ON using VM_BUG_ON_PAGE

2014-01-24T00:36:50+00:00

Most of the VM_BUG_ON assertions are performed on a page.  Usually, when
one of these assertions fails we'll get a BUG_ON with a call stack and
the registers.

I've recently noticed based on the requests to add a small piece of code
that dumps the page to various VM_BUG_ON sites that the page dump is
quite useful to people debugging issues in mm.

This patch adds a VM_BUG_ON_PAGE(cond, page) which beyond doing what
VM_BUG_ON() does, also dumps the page before executing the actual
BUG_ON.

[akpm@linux-foundation.org: fix up includes]
Signed-off-by: Sasha Levin 
Cc: "Kirill A. Shutemov" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: print more details for bad_page()

2014-01-24T00:36:50+00:00

bad_page() is cool in that it prints out a bunch of data about the page.
But, I can never remember which page flags are good and which are bad,
or whether ->index or ->mapping is required to be NULL.

This patch allows bad/dump_page() callers to specify a string about why
they are dumping the page and adds explanation strings to a number of
places.  It also adds a 'bad_flags' argument to bad_page(), which it
then dumps out separately from the flags which are actually set.

This way, the messages will show specifically why the page was bad,
*specifically* which flags it is complaining about, if it was a page
flag combination which was the problem.

[akpm@linux-foundation.org: switch to pr_alert]
Signed-off-by: Dave Hansen 
Reviewed-by: Christoph Lameter 
Cc: Andi Kleen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: create a separate slab for page->ptl allocation

2014-01-22T00:19:44+00:00

If DEBUG_SPINLOCK and DEBUG_LOCK_ALLOC are enabled spinlock_t on x86_64
is 72 bytes.  For page->ptl they will be allocated from kmalloc-96 slab,
so we loose 24 on each.  An average system can easily allocate few tens
thousands of page->ptl and overhead is significant.

Let's create a separate slab for page->ptl allocation to solve this.

To make sure that it really works this time, some numbers from my test
machine (just booted, no load):

Before:
  # grep '^\(kmalloc-96\|page->ptl\)' /proc/slabinfo
  kmalloc-96         31987  32190    128   30    1 : tunables  120   60    8 : slabdata   1073   1073     92
After:
  # grep '^\(kmalloc-96\|page->ptl\)' /proc/slabinfo
  page->ptl          27516  28143     72   53    1 : tunables  120   60    8 : slabdata    531    531      9
  kmalloc-96          3853   5280    128   30    1 : tunables  120   60    8 : slabdata    176    176      0

Note that the patch is useful not only for debug case, but also for
PREEMPT_RT, where spinlock_t is always bloated.

Signed-off-by: Kirill A. Shutemov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

dma-debug: introduce debug_dma_assert_idle()

2014-01-22T00:19:41+00:00

Record actively mapped pages and provide an api for asserting a given
page is dma inactive before execution proceeds.  Placing
debug_dma_assert_idle() in cow_user_page() flagged the violation of the
dma-api in the NET_DMA implementation (see commit 77873803363c "net_dma:
mark broken").

The implementation includes the capability to count, in a limited way,
repeat mappings of the same page that occur without an intervening
unmap.  This 'overlap' counter is limited to the few bits of tag space
in a radix tree.  This mechanism is added to mitigate false negative
cases where, for example, a page is dma mapped twice and
debug_dma_assert_idle() is called after the page is un-mapped once.

Signed-off-by: Dan Williams 
Cc: Joerg Roedel 
Cc: Vinod Koul 
Cc: Russell King 
Cc: James Bottomley 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: fix build of split ptlock code

2013-12-20T23:41:27+00:00

Commit 597d795a2a78 ('mm: do not allocate page->ptl dynamically, if
spinlock_t fits to long') restructures some allocators that are compiled
even if USE_SPLIT_PTLOCKS arn't used.  It results in compilation
failure:

  mm/memory.c:4282:6: error: 'struct page' has no member named 'ptl'
  mm/memory.c:4288:12: error: 'struct page' has no member named 'ptl'

Add in the missing ifdef.

Fixes: 597d795a2a78 ('mm: do not allocate page->ptl dynamically, if spinlock_t fits to long')
Signed-off-by: Olof Johansson 
Cc: Kirill A. Shutemov 
Cc: Hugh Dickins 
Signed-off-by: Linus Torvalds