linux-stable.git/mm/filemap.c, branch v3.0.22

readahead: fix pipeline break caused by block plug

2012-02-13T19:06:04+00:00

commit 3deaa7190a8da38453c4fabd9dec7f66d17fff67 upstream.

Herbert Poetzl reported a performance regression since 2.6.39.  The test
is a simple dd read, but with big block size.  The reason is:

T1: ra (A, A+128k), (A+128k, A+256k)
T2: lock_page for page A, submit the 256k
T3: hit page A+128K, ra (A+256k, A+384). the range isn't submitted
because of plug and there isn't any lock_page till we hit page A+256k
because all pages from A to A+256k is in memory
T4: hit page A+256k, ra (A+384, A+ 512). Because of plug, the range isn't
submitted again.
T5: lock_page A+256k, so (A+256k, A+512k) will be submitted. The task is
waitting for (A+256k, A+512k) finish.

There is no request to disk in T3 and T4, so readahead pipeline breaks.

We really don't need block plug for generic_file_aio_read() for buffered
I/O.  The readahead already has plug and has fine grained control when I/O
should be submitted.  Deleting plug for buffered I/O fixes the regression.

One side effect is plug makes the request size 256k, the size is 128k
without it.  This is because default ra size is 128k and not a reason we
need plug here.

Vivek said:

: We submit some readahead IO to device request queue but because of nested
: plug, queue never gets unplugged.  When read logic reaches a page which is
: not in page cache, it waits for page to be read from the disk
: (lock_page_killable()) and that time we flush the plug list.
:
: So effectively read ahead logic is kind of broken in parts because of
: nested plugging.  Removing top level plug (generic_file_aio_read()) for
: buffered reads, will allow unplugging queue earlier for readahead.

Signed-off-by: Shaohua Li 
Signed-off-by: Wu Fengguang 
Reported-by: Herbert Poetzl 
Tested-by: Eric Dumazet 
Cc: Christoph Hellwig 
Cc: Jens Axboe 
Cc: Vivek Goyal 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

memcg: add mem_cgroup_replace_page_cache() to fix LRU issue

2012-01-26T01:24:43+00:00

commit ab936cbcd02072a34b60d268f94440fd5cf1970b upstream.

Commit ef6a3c6311 ("mm: add replace_page_cache_page() function") added a
function replace_page_cache_page().  This function replaces a page in the
radix-tree with a new page.  WHen doing this, memory cgroup needs to fix
up the accounting information.  memcg need to check PCG_USED bit etc.

In some(many?) cases, 'newpage' is on LRU before calling
replace_page_cache().  So, memcg's LRU accounting information should be
fixed, too.

This patch adds mem_cgroup_replace_page_cache() and removes the old hooks.
 In that function, old pages will be unaccounted without touching
res_counter and new page will be accounted to the memcg (of old page).
WHen overwriting pc->mem_cgroup of newpage, take zone->lru_lock and avoid
races with LRU handling.

Background:
  replace_page_cache_page() is called by FUSE code in its splice() handling.
  Here, 'newpage' is replacing oldpage but this newpage is not a newly allocated
  page and may be on LRU. LRU mis-accounting will be critical for memory cgroup
  because rmdir() checks the whole LRU is empty and there is no account leak.
  If a page is on the other LRU than it should be, rmdir() will fail.

This bug was added in March 2011, but no bug report yet.  I guess there
are not many people who use memcg and FUSE at the same time with upstream
kernels.

The result of this bug is that admin cannot destroy a memcg because of
account leak.  So, no panic, no deadlock.  And, even if an active cgroup
exist, umount can succseed.  So no problem at shutdown.

Signed-off-by: KAMEZAWA Hiroyuki 
Acked-by: Johannes Weiner 
Acked-by: Michal Hocko 
Cc: Miklos Szeredi 
Cc: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

vfs: __read_cache_page should use gfp argument rather than GFP_KERNEL

2012-01-06T22:13:54+00:00

commit e6f67b8c05f5e129e126f4409ddac6f25f58ffcb upstream.

lockdep reports a deadlock in jfs because a special inode's rw semaphore
is taken recursively.  The mapping's gfp mask is GFP_NOFS, but is not
used when __read_cache_page() calls add_to_page_cache_lru().

Signed-off-by: Dave Kleikamp 
Acked-by: Hugh Dickins 
Acked-by: Al Viro 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

more conservative S_NOSEC handling

2011-06-03T22:24:58+00:00

Caching "we have already removed suid/caps" was overenthusiastic as merged.
On network filesystems we might have had suid/caps set on another client,
silently picked by this client on revalidate, all of that *without* clearing
the S_NOSEC flag.

AFAICS, the only reasonably sane way to deal with that is
	* new superblock flag; unless set, S_NOSEC is not going to be set.
	* local block filesystems set it in their ->mount() (more accurately,
mount_bdev() does, so does btrfs ->mount(), users of mount_bdev() other than
local block ones clear it)
	* if any network filesystem (or a cluster one) wants to use S_NOSEC,
it'll need to set MS_NOSEC in sb->s_flags *AND* take care to clear S_NOSEC when
inode attribute changes are picked from other clients.

It's not an earth-shattering hole (anybody that can set suid on another client
will almost certainly be able to write to the file before doing that anyway),
but it's a bug that needs fixing.

Signed-off-by: Al Viro

Cache xattr security drop check for write v2

2011-05-28T16:02:09+00:00

Some recent benchmarking on btrfs showed that a major scaling bottleneck
on large systems on btrfs is currently the xattr lookup on every write.

Why xattr lookup on every write I hear you ask?

write wants to drop suid and security related xattrs that could set o
capabilities for executables.  To do that it currently looks up
security.capability on EVERY write (even for non executables) to decide
whether to drop it or not.

In btrfs this causes an additional tree walk, hitting some per file system
locks and quite bad scalability. In a simple read workload on a 8S
system I saw over 90% CPU time in spinlocks related to that.

Chris Mason tells me this is also a problem in ext4, where it hits
the global mbcache lock.

This patch adds a simple per inode to avoid this problem.  We only
do the lookup once per file and then if there is no xattr cache
the decision. All xattr changes clear the flag.

I also used the same flag to avoid the suid check, although
that one is pretty cheap.

A file system can also set this flag when it creates the inode,
if it has a cheap way to do so.  This is done for some common file systems
in followon patches.

With this patch a major part of the lock contention disappears
for btrfs. Some testing on smaller systems didn't show significant
performance changes, but at least it helps the larger systems
and is generally more efficient.

v2: Rename is_sgid. add file system helper.
Cc: chris.mason@oracle.com
Cc: josef@redhat.com
Cc: viro@zeniv.linux.org.uk
Cc: agruen@linbit.com
Cc: Serge E. Hallyn 
Signed-off-by: Andi Kleen 
Signed-off-by: Al Viro

mm: Wait for writeback when grabbing pages to begin a write

2011-05-28T05:03:21+00:00

When grabbing a page for a buffered IO write, the mm should wait for writeback
on the page to complete so that the page does not become writable during the IO
operation.  This change is needed to provide page stability during writes for
all filesystems.

Signed-off-by: Darrick J. Wong 
Signed-off-by: Al Viro

memcg: add the pagefault count into memcg stats

2011-05-27T00:12:36+00:00

Two new stats in per-memcg memory.stat which tracks the number of page
faults and number of major page faults.

  "pgfault"
  "pgmajfault"

They are different from "pgpgin"/"pgpgout" stat which count number of
pages charged/discharged to the cgroup and have no meaning of reading/
writing page to disk.

It is valuable to track the two stats for both measuring application's
performance as well as the efficiency of the kernel page reclaim path.
Counting pagefaults per process is useful, but we also need the aggregated
value since processes are monitored and controlled in cgroup basis in
memcg.

Functional test: check the total number of pgfault/pgmajfault of all
memcgs and compare with global vmstat value:

  $ cat /proc/vmstat | grep fault
  pgfault 1070751
  pgmajfault 553

  $ cat /dev/cgroup/memory.stat | grep fault
  pgfault 1071138
  pgmajfault 553
  total_pgfault 1071142
  total_pgmajfault 553

  $ cat /dev/cgroup/A/memory.stat | grep fault
  pgfault 199
  pgmajfault 0
  total_pgfault 199
  total_pgmajfault 0

Performance test: run page fault test(pft) wit 16 thread on faulting in
15G anon pages in 16G container.  There is no regression noticed on the
"flt/cpu/s"

Sample output from pft:

  TAG pft:anon-sys-default:
    Gb  Thr CLine   User     System     Wall    flt/cpu/s fault/wsec
    15   16   1     0.67s   233.41s    14.76s   16798.546 266356.260

  +-------------------------------------------------------------------------+
      N           Min           Max        Median           Avg        Stddev
  x  10     16682.962     17344.027     16913.524     16928.812      166.5362
  +  10     16695.568     16923.896     16820.604     16824.652     84.816568
  No difference proven at 95.0% confidence

[akpm@linux-foundation.org: fix build]
[hughd@google.com: shmem fix]
Signed-off-by: Ying Han 
Acked-by: KAMEZAWA Hiroyuki 
Cc: KOSAKI Motohiro 
Reviewed-by: Minchan Kim 
Cc: Daisuke Nishimura 
Acked-by: Balbir Singh 
Signed-off-by: Hugh Dickins 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem

2011-05-26T17:50:56+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djm/tmem:
  xen: cleancache shim to Xen Transcendent Memory
  ocfs2: add cleancache support
  ext4: add cleancache support
  btrfs: add cleancache support
  ext3: add cleancache support
  mm/fs: add hooks to support cleancache
  mm: cleancache core ops functions and config
  fs: add field to superblock to support cleancache
  mm/fs: cleancache documentation

Fix up trivial conflict in fs/btrfs/extent_io.c due to includes

mm/fs: add hooks to support cleancache

2011-05-26T16:01:43+00:00

This fourth patch of eight in this cleancache series provides the
core hooks in VFS for: initializing cleancache per filesystem;
capturing clean pages reclaimed by page cache; attempting to get
pages from cleancache before filesystem read; and ensuring coherency
between pagecache, disk, and cleancache.  Note that the placement
of these hooks was stable from 2.6.18 to 2.6.38; a minor semantic
change was required due to a patchset in 2.6.39.

All hooks become no-ops if CONFIG_CLEANCACHE is unset, or become
a check of a boolean global if CONFIG_CLEANCACHE is set but no
cleancache "backend" has claimed cleancache_ops.

Details and a FAQ can be found in Documentation/vm/cleancache.txt

[v8: minchan.kim@gmail.com: adapt to new remove_from_page_cache function]
Signed-off-by: Chris Mason 
Signed-off-by: Dan Magenheimer 
Reviewed-by: Jeremy Fitzhardinge 
Reviewed-by: Konrad Rzeszutek Wilk 
Cc: Andrew Morton 
Cc: Al Viro 
Cc: Matthew Wilcox 
Cc: Nick Piggin 
Cc: Mel Gorman 
Cc: Rik Van Riel 
Cc: Jan Beulich 
Cc: Andreas Dilger 
Cc: Ted Ts'o 
Cc: Mark Fasheh 
Cc: Joel Becker 
Cc: Nitin Gupta

readahead: trigger mmap sequential readahead on PG_readahead

2011-05-25T15:39:27+00:00

Previously the mmap sequential readahead is triggered by updating
ra->prev_pos on each page fault and compare it with current page offset.

It costs dirtying the cache line on each _minor_ page fault.  So remove
the ra->prev_pos recording, and instead tag PG_readahead to trigger the
possible sequential readahead.  It's not only more simple, but also will
work more reliably and reduce cache line bouncing on concurrent page
faults on shared struct file.

In the mosbench exim benchmark which does multi-threaded page faults on
shared struct file, the ra->mmap_miss and ra->prev_pos updates are found
to cause excessive cache line bouncing on tmpfs, which actually disabled
readahead totally (shmem_backing_dev_info.ra_pages == 0).

So remove the ra->prev_pos recording, and instead tag PG_readahead to
trigger the possible sequential readahead.  It's not only more simple, but
also will work more reliably on concurrent reads on shared struct file.

Signed-off-by: Wu Fengguang 
Tested-by: Tim Chen 
Reported-by: Andi Kleen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds