<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/lib, branch v6.2.9</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>maple_tree: fix mas_skip_node() end slot detection</title>
<updated>2023-03-30T10:51:38+00:00</updated>
<author>
<name>Liam R. Howlett</name>
<email>Liam.Howlett@oracle.com</email>
</author>
<published>2023-03-07T18:02:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=48c427450711cbc537c9d0b297ea7da9b89d4137'/>
<id>48c427450711cbc537c9d0b297ea7da9b89d4137</id>
<content type='text'>
commit 0fa99fdfe1b38da396d0b2d1496a823bcd0ebea0 upstream.

Patch series "Fix mas_skip_node() for mas_empty_area()", v2.

mas_empty_area() was incorrectly returning an error when there was room.
The issue was tracked down to mas_skip_node() using the incorrect
end-of-slot count.  Instead of using the nodes hard limit, the limit of
data should be used.

mas_skip_node() was also setting the min and max to that of the child
node, which was unnecessary.  Within these limits being set, there was
also a bug that corrupted the maple state's max if the offset was set to
the maximum node pivot.  The bug was without consequence unless there was
a sufficient gap in the next child node which would cause an error to be
returned.

This patch set fixes these errors by removing the limit setting from
mas_skip_node() and uses the mas_data_end() for slot limits, and adds
tests for all failures discovered.


This patch (of 2):

mas_skip_node() is used to move the maple state to the node with a higher
limit.  It does this by walking up the tree and increasing the slot count.
Since slot count may not be able to be increased, it may need to walk up
multiple times to find room to walk right to a higher limit node.  The
limit of slots that was being used was the node limit and not the last
location of data in the node.  This would cause the maple state to be
shifted outside actual data and enter an error state, thus returning
-EBUSY.

The result of the incorrect error state means that mas_awalk() would
return an error instead of finding the allocation space.

The fix is to use mas_data_end() in mas_skip_node() to detect the nodes
data end point and continue walking the tree up until it is safe to move
to a node with a higher limit.

The walk up the tree also sets the maple state limits so remove the buggy
code from mas_skip_node().  Setting the limits had the unfortunate side
effect of triggering another bug if the parent node was full and the there
was no suitable gap in the second last child, but room in the next child.

mas_skip_node() may also be passed a maple state in an error state from
mas_anode_descend() when no allocations are available.  Return on such an
error state immediately.

Link: https://lkml.kernel.org/r/20230307180247.2220303-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230307180247.2220303-2-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett &lt;Liam.Howlett@oracle.com&gt;
Reported-by: Snild Dolkow &lt;snild@sony.com&gt;
  Link: https://lore.kernel.org/linux-mm/cb8dc31a-fef2-1d09-f133-e9f7b9f9e77a@sony.com/
Tested-by: Snild Dolkow &lt;snild@sony.com&gt;
Cc: Peng Zhang &lt;zhangpeng.00@bytedance.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 0fa99fdfe1b38da396d0b2d1496a823bcd0ebea0 upstream.

Patch series "Fix mas_skip_node() for mas_empty_area()", v2.

mas_empty_area() was incorrectly returning an error when there was room.
The issue was tracked down to mas_skip_node() using the incorrect
end-of-slot count.  Instead of using the nodes hard limit, the limit of
data should be used.

mas_skip_node() was also setting the min and max to that of the child
node, which was unnecessary.  Within these limits being set, there was
also a bug that corrupted the maple state's max if the offset was set to
the maximum node pivot.  The bug was without consequence unless there was
a sufficient gap in the next child node which would cause an error to be
returned.

This patch set fixes these errors by removing the limit setting from
mas_skip_node() and uses the mas_data_end() for slot limits, and adds
tests for all failures discovered.


This patch (of 2):

mas_skip_node() is used to move the maple state to the node with a higher
limit.  It does this by walking up the tree and increasing the slot count.
Since slot count may not be able to be increased, it may need to walk up
multiple times to find room to walk right to a higher limit node.  The
limit of slots that was being used was the node limit and not the last
location of data in the node.  This would cause the maple state to be
shifted outside actual data and enter an error state, thus returning
-EBUSY.

The result of the incorrect error state means that mas_awalk() would
return an error instead of finding the allocation space.

The fix is to use mas_data_end() in mas_skip_node() to detect the nodes
data end point and continue walking the tree up until it is safe to move
to a node with a higher limit.

The walk up the tree also sets the maple state limits so remove the buggy
code from mas_skip_node().  Setting the limits had the unfortunate side
effect of triggering another bug if the parent node was full and the there
was no suitable gap in the second last child, but room in the next child.

mas_skip_node() may also be passed a maple state in an error state from
mas_anode_descend() when no allocations are available.  Return on such an
error state immediately.

Link: https://lkml.kernel.org/r/20230307180247.2220303-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230307180247.2220303-2-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett &lt;Liam.Howlett@oracle.com&gt;
Reported-by: Snild Dolkow &lt;snild@sony.com&gt;
  Link: https://lore.kernel.org/linux-mm/cb8dc31a-fef2-1d09-f133-e9f7b9f9e77a@sony.com/
Tested-by: Snild Dolkow &lt;snild@sony.com&gt;
Cc: Peng Zhang &lt;zhangpeng.00@bytedance.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>test_maple_tree: add more testing for mas_empty_area()</title>
<updated>2023-03-30T10:51:38+00:00</updated>
<author>
<name>Liam R. Howlett</name>
<email>Liam.Howlett@oracle.com</email>
</author>
<published>2023-03-07T18:02:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9564391d53ec4a8355756f42866e45873260d68e'/>
<id>9564391d53ec4a8355756f42866e45873260d68e</id>
<content type='text'>
commit 4bd6dded6318dc8e2514d74868c1f8fb38b61a60 upstream.

Test robust filling of an entire area of the tree, then test one beyond.
This is to test the walking back up the tree at the end of nodes and error
condition.  Test inspired by the reproducer code provided by Snild Dolkow.

The last test in the function tests for the case of a corrupted maple
state caused by the incorrect limits set during mas_skip_node().  There
needs to be a gap in the second last child and last child, but the search
must rule out the second last child's gap.  This would avoid correcting
the maple state to the correct max limit and return an error.

Link: https://lkml.kernel.org/r/20230307180247.2220303-3-Liam.Howlett@oracle.com
Cc: Snild Dolkow &lt;snild@sony.com&gt;
Link: https://lore.kernel.org/linux-mm/cb8dc31a-fef2-1d09-f133-e9f7b9f9e77a@sony.com/
Fixes: e15e06a83923 ("lib/test_maple_tree: add testing for maple tree")
Signed-off-by: Liam R. Howlett &lt;Liam.Howlett@oracle.com&gt;
Cc: Peng Zhang &lt;zhangpeng.00@bytedance.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 4bd6dded6318dc8e2514d74868c1f8fb38b61a60 upstream.

Test robust filling of an entire area of the tree, then test one beyond.
This is to test the walking back up the tree at the end of nodes and error
condition.  Test inspired by the reproducer code provided by Snild Dolkow.

The last test in the function tests for the case of a corrupted maple
state caused by the incorrect limits set during mas_skip_node().  There
needs to be a gap in the second last child and last child, but the search
must rule out the second last child's gap.  This would avoid correcting
the maple state to the correct max limit and return an error.

Link: https://lkml.kernel.org/r/20230307180247.2220303-3-Liam.Howlett@oracle.com
Cc: Snild Dolkow &lt;snild@sony.com&gt;
Link: https://lore.kernel.org/linux-mm/cb8dc31a-fef2-1d09-f133-e9f7b9f9e77a@sony.com/
Fixes: e15e06a83923 ("lib/test_maple_tree: add testing for maple tree")
Signed-off-by: Liam R. Howlett &lt;Liam.Howlett@oracle.com&gt;
Cc: Peng Zhang &lt;zhangpeng.00@bytedance.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG</title>
<updated>2023-03-10T08:29:06+00:00</updated>
<author>
<name>Peter Zijlstra</name>
<email>peterz@infradead.org</email>
</author>
<published>2023-01-26T15:08:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=28a2cd87dd09fea2c804d07155a7f011755641aa'/>
<id>28a2cd87dd09fea2c804d07155a7f011755641aa</id>
<content type='text'>
[ Upstream commit 5a5d7e9badd2cb8065db171961bd30bd3595e4b6 ]

In order to avoid WARN/BUG from generating nested or even recursive
warnings, force rcu_is_watching() true during
WARN/lockdep_rcu_suspicious().

Notably things like unwinding the stack can trigger rcu_dereference()
warnings, which then triggers more unwinding which then triggers more
warnings etc..

Signed-off-by: Peter Zijlstra (Intel) &lt;peterz@infradead.org&gt;
Signed-off-by: Ingo Molnar &lt;mingo@kernel.org&gt;
Link: https://lore.kernel.org/r/20230126151323.408156109@infradead.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 5a5d7e9badd2cb8065db171961bd30bd3595e4b6 ]

In order to avoid WARN/BUG from generating nested or even recursive
warnings, force rcu_is_watching() true during
WARN/lockdep_rcu_suspicious().

Notably things like unwinding the stack can trigger rcu_dereference()
warnings, which then triggers more unwinding which then triggers more
warnings etc..

Signed-off-by: Peter Zijlstra (Intel) &lt;peterz@infradead.org&gt;
Signed-off-by: Ingo Molnar &lt;mingo@kernel.org&gt;
Link: https://lore.kernel.org/r/20230126151323.408156109@infradead.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>kobject: Fix slab-out-of-bounds in fill_kobj_path()</title>
<updated>2023-03-10T08:28:48+00:00</updated>
<author>
<name>Wang Hai</name>
<email>wanghai38@huawei.com</email>
</author>
<published>2022-12-20T01:21:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e6ca1549afb2b495e61a8fb53ae942193ef823e0'/>
<id>e6ca1549afb2b495e61a8fb53ae942193ef823e0</id>
<content type='text'>
[ Upstream commit 3bb2a01caa813d3a1845d378bbe4169ef280d394 ]

In kobject_get_path(), if kobj-&gt;name is changed between calls
get_kobj_path_length() and fill_kobj_path() and the length becomes
longer, then fill_kobj_path() will have an out-of-bounds bug.

The actual current problem occurs when the ixgbe probe.

In ixgbe_mii_bus_init(), if the length of netdev-&gt;dev.kobj.name
length becomes longer, out-of-bounds will occur.

cpu0                                         cpu1
ixgbe_probe
 register_netdev(netdev)
  netdev_register_kobject
   device_add
    kobject_uevent // Sending ADD events
                                             systemd-udevd // rename netdev
                                              dev_change_name
                                               device_rename
                                                kobject_rename
 ixgbe_mii_bus_init                             |
  mdiobus_register                              |
   __mdiobus_register                           |
    device_register                             |
     device_add                                 |
      kobject_uevent                            |
       kobject_get_path                         |
        len = get_kobj_path_length // old name  |
        path = kzalloc(len, gfp_mask);          |
                                                kobj-&gt;name = name;
                                                /* name length becomes
                                                 * longer
                                                 */
        fill_kobj_path /* kobj path length is
                        * longer than path,
                        * resulting in out of
                        * bounds when filling path
                        */

This is the kasan report:

==================================================================
BUG: KASAN: slab-out-of-bounds in fill_kobj_path+0x50/0xc0
Write of size 7 at addr ff1100090573d1fd by task kworker/28:1/673

 Workqueue: events work_for_cpu_fn
 Call Trace:
 &lt;TASK&gt;
 dump_stack_lvl+0x34/0x48
 print_address_description.constprop.0+0x86/0x1e7
 print_report+0x36/0x4f
 kasan_report+0xad/0x130
 kasan_check_range+0x35/0x1c0
 memcpy+0x39/0x60
 fill_kobj_path+0x50/0xc0
 kobject_get_path+0x5a/0xc0
 kobject_uevent_env+0x140/0x460
 device_add+0x5c7/0x910
 __mdiobus_register+0x14e/0x490
 ixgbe_probe.cold+0x441/0x574 [ixgbe]
 local_pci_probe+0x78/0xc0
 work_for_cpu_fn+0x26/0x40
 process_one_work+0x3b6/0x6a0
 worker_thread+0x368/0x520
 kthread+0x165/0x1a0
 ret_from_fork+0x1f/0x30

This reproducer triggers that bug:

while:
do
    rmmod ixgbe
    sleep 0.5
    modprobe ixgbe
    sleep 0.5

When calling fill_kobj_path() to fill path, if the name length of
kobj becomes longer, return failure and retry. This fixes the problem.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai &lt;wanghai38@huawei.com&gt;
Link: https://lore.kernel.org/r/20221220012143.52141-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 3bb2a01caa813d3a1845d378bbe4169ef280d394 ]

In kobject_get_path(), if kobj-&gt;name is changed between calls
get_kobj_path_length() and fill_kobj_path() and the length becomes
longer, then fill_kobj_path() will have an out-of-bounds bug.

The actual current problem occurs when the ixgbe probe.

In ixgbe_mii_bus_init(), if the length of netdev-&gt;dev.kobj.name
length becomes longer, out-of-bounds will occur.

cpu0                                         cpu1
ixgbe_probe
 register_netdev(netdev)
  netdev_register_kobject
   device_add
    kobject_uevent // Sending ADD events
                                             systemd-udevd // rename netdev
                                              dev_change_name
                                               device_rename
                                                kobject_rename
 ixgbe_mii_bus_init                             |
  mdiobus_register                              |
   __mdiobus_register                           |
    device_register                             |
     device_add                                 |
      kobject_uevent                            |
       kobject_get_path                         |
        len = get_kobj_path_length // old name  |
        path = kzalloc(len, gfp_mask);          |
                                                kobj-&gt;name = name;
                                                /* name length becomes
                                                 * longer
                                                 */
        fill_kobj_path /* kobj path length is
                        * longer than path,
                        * resulting in out of
                        * bounds when filling path
                        */

This is the kasan report:

==================================================================
BUG: KASAN: slab-out-of-bounds in fill_kobj_path+0x50/0xc0
Write of size 7 at addr ff1100090573d1fd by task kworker/28:1/673

 Workqueue: events work_for_cpu_fn
 Call Trace:
 &lt;TASK&gt;
 dump_stack_lvl+0x34/0x48
 print_address_description.constprop.0+0x86/0x1e7
 print_report+0x36/0x4f
 kasan_report+0xad/0x130
 kasan_check_range+0x35/0x1c0
 memcpy+0x39/0x60
 fill_kobj_path+0x50/0xc0
 kobject_get_path+0x5a/0xc0
 kobject_uevent_env+0x140/0x460
 device_add+0x5c7/0x910
 __mdiobus_register+0x14e/0x490
 ixgbe_probe.cold+0x441/0x574 [ixgbe]
 local_pci_probe+0x78/0xc0
 work_for_cpu_fn+0x26/0x40
 process_one_work+0x3b6/0x6a0
 worker_thread+0x368/0x520
 kthread+0x165/0x1a0
 ret_from_fork+0x1f/0x30

This reproducer triggers that bug:

while:
do
    rmmod ixgbe
    sleep 0.5
    modprobe ixgbe
    sleep 0.5

When calling fill_kobj_path() to fill path, if the name length of
kobj becomes longer, return failure and retry. This fixes the problem.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai &lt;wanghai38@huawei.com&gt;
Link: https://lore.kernel.org/r/20221220012143.52141-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>printf: fix errname.c list</title>
<updated>2023-03-10T08:28:45+00:00</updated>
<author>
<name>Arnd Bergmann</name>
<email>arnd@arndb.de</email>
</author>
<published>2023-02-06T19:40:57+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5c8ffa6de2c44db77cf48790a512d371ec075ddc'/>
<id>5c8ffa6de2c44db77cf48790a512d371ec075ddc</id>
<content type='text'>
[ Upstream commit 0c2baf6509af1d11310ae4c1c839481a6e9a4bc4 ]

On most architectures, gcc -Wextra warns about the list of error
numbers containing both EDEADLK and EDEADLOCK:

lib/errname.c:15:67: warning: initialized field overwritten [-Woverride-init]
   15 | #define E(err) [err + BUILD_BUG_ON_ZERO(err &lt;= 0 || err &gt; 300)] = "-" #err
      |                                                                   ^~~
lib/errname.c:172:2: note: in expansion of macro 'E'
  172 |  E(EDEADLK), /* EDEADLOCK */
      |  ^

On parisc, a similar error happens with -ECANCELLED, which is an
alias for ECANCELED.

Make the EDEADLK printing conditional on the number being distinct
from EDEADLOCK, and remove the -ECANCELLED bit completely as it
can never be hit.

To ensure these are correct, add static_assert lines that verify
all the remaining aliases are in fact identical to the canonical
name.

Fixes: 57f5677e535b ("printf: add support for printing symbolic error names")
Cc: Petr Mladek &lt;pmladek@suse.com&gt;
Suggested-by: Rasmus Villemoes &lt;linux@rasmusvillemoes.dk&gt;
Acked-by: Uwe Kleine-König &lt;uwe@kleine-koenig.org&gt;
Reviewed-by: Andy Shevchenko &lt;andy.shevchenko@gmail.com&gt;
Link: https://lore.kernel.org/all/20210514213456.745039-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20210927123409.1109737-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Reviewed-by: Sergey Senozhatsky &lt;senozhatsky@chromium.org&gt;
Acked-by: Rasmus Villemoes &lt;linux@rasmusvillemoes.dk&gt;
Reviewed-by: Petr Mladek &lt;pmladek@suse.com&gt;
Signed-off-by: Petr Mladek &lt;pmladek@suse.com&gt;
Link: https://lore.kernel.org/r/20230206194126.380350-1-arnd@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 0c2baf6509af1d11310ae4c1c839481a6e9a4bc4 ]

On most architectures, gcc -Wextra warns about the list of error
numbers containing both EDEADLK and EDEADLOCK:

lib/errname.c:15:67: warning: initialized field overwritten [-Woverride-init]
   15 | #define E(err) [err + BUILD_BUG_ON_ZERO(err &lt;= 0 || err &gt; 300)] = "-" #err
      |                                                                   ^~~
lib/errname.c:172:2: note: in expansion of macro 'E'
  172 |  E(EDEADLK), /* EDEADLOCK */
      |  ^

On parisc, a similar error happens with -ECANCELLED, which is an
alias for ECANCELED.

Make the EDEADLK printing conditional on the number being distinct
from EDEADLOCK, and remove the -ECANCELLED bit completely as it
can never be hit.

To ensure these are correct, add static_assert lines that verify
all the remaining aliases are in fact identical to the canonical
name.

Fixes: 57f5677e535b ("printf: add support for printing symbolic error names")
Cc: Petr Mladek &lt;pmladek@suse.com&gt;
Suggested-by: Rasmus Villemoes &lt;linux@rasmusvillemoes.dk&gt;
Acked-by: Uwe Kleine-König &lt;uwe@kleine-koenig.org&gt;
Reviewed-by: Andy Shevchenko &lt;andy.shevchenko@gmail.com&gt;
Link: https://lore.kernel.org/all/20210514213456.745039-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20210927123409.1109737-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Reviewed-by: Sergey Senozhatsky &lt;senozhatsky@chromium.org&gt;
Acked-by: Rasmus Villemoes &lt;linux@rasmusvillemoes.dk&gt;
Reviewed-by: Petr Mladek &lt;pmladek@suse.com&gt;
Signed-off-by: Petr Mladek &lt;pmladek@suse.com&gt;
Link: https://lore.kernel.org/r/20230206194126.380350-1-arnd@kernel.org
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>lib/mpi: Fix buffer overrun when SG is too long</title>
<updated>2023-03-10T08:28:05+00:00</updated>
<author>
<name>Herbert Xu</name>
<email>herbert@gondor.apana.org.au</email>
</author>
<published>2022-12-27T14:27:39+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e83bf66998bf7c71bbe37755dd007949cc2629a6'/>
<id>e83bf66998bf7c71bbe37755dd007949cc2629a6</id>
<content type='text'>
[ Upstream commit 7361d1bc307b926cbca214ab67b641123c2d6357 ]

The helper mpi_read_raw_from_sgl sets the number of entries in
the SG list according to nbytes.  However, if the last entry
in the SG list contains more data than nbytes, then it may overrun
the buffer because it only allocates enough memory for nbytes.

Fixes: 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers")
Reported-by: Roberto Sassu &lt;roberto.sassu@huaweicloud.com&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
Reviewed-by: Eric Biggers &lt;ebiggers@google.com&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 7361d1bc307b926cbca214ab67b641123c2d6357 ]

The helper mpi_read_raw_from_sgl sets the number of entries in
the SG list according to nbytes.  However, if the last entry
in the SG list contains more data than nbytes, then it may overrun
the buffer because it only allocates enough memory for nbytes.

Fixes: 2d4d1eea540b ("lib/mpi: Add mpi sgl helpers")
Reported-by: Roberto Sassu &lt;roberto.sassu@huaweicloud.com&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
Reviewed-by: Eric Biggers &lt;ebiggers@google.com&gt;
Signed-off-by: Herbert Xu &lt;herbert@gondor.apana.org.au&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>sbitmap: correct wake_batch recalculation to avoid potential IO hung</title>
<updated>2023-03-10T08:27:53+00:00</updated>
<author>
<name>Kemeng Shi</name>
<email>shikemeng@huaweicloud.com</email>
</author>
<published>2023-01-16T20:50:59+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=5d22d1b2b9a77d70b4866d3dd47cce56e5710d6f'/>
<id>5d22d1b2b9a77d70b4866d3dd47cce56e5710d6f</id>
<content type='text'>
[ Upstream commit b5fcf7871acb7f9a3a8ed341a68bd86aba3e254a ]

Commit 180dccb0dba4f ("blk-mq: fix tag_get wait task can't be awakened")
mentioned that in case of shared tags, there could be just one real
active hctx(queue) because of lazy detection of tag idle. Then driver tag
allocation may wait forever on this real active hctx(queue) if wake_batch
is &gt; hctx_max_depth where hctx_max_depth is available tags depth for the
actve hctx(queue). However, the condition wake_batch &gt; hctx_max_depth is
not strong enough to avoid IO hung as the sbitmap_queue_wake_up will only
wake up one wait queue for each wake_batch even though there is only one
waiter in the woken wait queue. After this, there is only one tag to free
and wake_batch may not be reached anymore. Commit 180dccb0dba4f ("blk-mq:
fix tag_get wait task can't be awakened") methioned that driver tag
allocation may wait forever. Actually, the inactive hctx(queue) will be
truely idle after at most 30 seconds and will call blk_mq_tag_wakeup_all
to wake one waiter per wait queue to break the hung. But IO hung for 30
seconds is also not acceptable. Set batch size to small enough that depth
of the shared hctx(queue) is enough to wake up all of the queues like
sbq_calc_wake_batch do to fix this potential IO hung.

Although hctx_max_depth will be clamped to at least 4 while wake_batch
recalculation does not do the clamp, the wake_batch will be always
recalculated to 1 when hctx_max_depth &lt;= 4.

Fixes: 180dccb0dba4 ("blk-mq: fix tag_get wait task can't be awakened")
Reviewed-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Kemeng Shi &lt;shikemeng@huaweicloud.com&gt;
Link: https://lore.kernel.org/r/20230116205059.3821738-6-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit b5fcf7871acb7f9a3a8ed341a68bd86aba3e254a ]

Commit 180dccb0dba4f ("blk-mq: fix tag_get wait task can't be awakened")
mentioned that in case of shared tags, there could be just one real
active hctx(queue) because of lazy detection of tag idle. Then driver tag
allocation may wait forever on this real active hctx(queue) if wake_batch
is &gt; hctx_max_depth where hctx_max_depth is available tags depth for the
actve hctx(queue). However, the condition wake_batch &gt; hctx_max_depth is
not strong enough to avoid IO hung as the sbitmap_queue_wake_up will only
wake up one wait queue for each wake_batch even though there is only one
waiter in the woken wait queue. After this, there is only one tag to free
and wake_batch may not be reached anymore. Commit 180dccb0dba4f ("blk-mq:
fix tag_get wait task can't be awakened") methioned that driver tag
allocation may wait forever. Actually, the inactive hctx(queue) will be
truely idle after at most 30 seconds and will call blk_mq_tag_wakeup_all
to wake one waiter per wait queue to break the hung. But IO hung for 30
seconds is also not acceptable. Set batch size to small enough that depth
of the shared hctx(queue) is enough to wake up all of the queues like
sbq_calc_wake_batch do to fix this potential IO hung.

Although hctx_max_depth will be clamped to at least 4 while wake_batch
recalculation does not do the clamp, the wake_batch will be always
recalculated to 1 when hctx_max_depth &lt;= 4.

Fixes: 180dccb0dba4 ("blk-mq: fix tag_get wait task can't be awakened")
Reviewed-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Kemeng Shi &lt;shikemeng@huaweicloud.com&gt;
Link: https://lore.kernel.org/r/20230116205059.3821738-6-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>sbitmap: remove redundant check in __sbitmap_queue_get_batch</title>
<updated>2023-03-10T08:27:52+00:00</updated>
<author>
<name>Kemeng Shi</name>
<email>shikemeng@huaweicloud.com</email>
</author>
<published>2023-01-16T20:50:56+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=9c3f9a4b2ca361868bcbb7c5b10e7991285b0e5d'/>
<id>9c3f9a4b2ca361868bcbb7c5b10e7991285b0e5d</id>
<content type='text'>
[ Upstream commit 903e86f3a64d9573352bbab2f211fdbbaa5772b7 ]

Commit fbb564a557809 ("lib/sbitmap: Fix invalid loop in
__sbitmap_queue_get_batch()") mentioned that "Checking free bits when
setting the target bits. Otherwise, it may reuse the busying bits."
This commit add check to make sure all masked bits in word before
cmpxchg is zero. Then the existing check after cmpxchg to check any
zero bit is existing in masked bits in word is redundant.

Actually, old value of word before cmpxchg is stored in val and we
will filter out busy bits in val by "(get_mask &amp; ~val)" after cmpxchg.
So we will not reuse busy bits methioned in commit fbb564a557809
("lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()"). Revert
new-added check to remove redundant check.

Fixes: fbb564a55780 ("lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()")
Reviewed-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Kemeng Shi &lt;shikemeng@huaweicloud.com&gt;
Link: https://lore.kernel.org/r/20230116205059.3821738-3-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 903e86f3a64d9573352bbab2f211fdbbaa5772b7 ]

Commit fbb564a557809 ("lib/sbitmap: Fix invalid loop in
__sbitmap_queue_get_batch()") mentioned that "Checking free bits when
setting the target bits. Otherwise, it may reuse the busying bits."
This commit add check to make sure all masked bits in word before
cmpxchg is zero. Then the existing check after cmpxchg to check any
zero bit is existing in masked bits in word is redundant.

Actually, old value of word before cmpxchg is stored in val and we
will filter out busy bits in val by "(get_mask &amp; ~val)" after cmpxchg.
So we will not reuse busy bits methioned in commit fbb564a557809
("lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()"). Revert
new-added check to remove redundant check.

Fixes: fbb564a55780 ("lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()")
Reviewed-by: Jan Kara &lt;jack@suse.cz&gt;
Signed-off-by: Kemeng Shi &lt;shikemeng@huaweicloud.com&gt;
Link: https://lore.kernel.org/r/20230116205059.3821738-3-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe &lt;axboe@kernel.dk&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>uaccess: Add speculation barrier to copy_from_user()</title>
<updated>2023-02-25T10:13:28+00:00</updated>
<author>
<name>Dave Hansen</name>
<email>dave.hansen@linux.intel.com</email>
</author>
<published>2023-02-21T20:30:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2c8ee21d78942cf48bc836612ad365fd6f06cfbb'/>
<id>2c8ee21d78942cf48bc836612ad365fd6f06cfbb</id>
<content type='text'>
commit 74e19ef0ff8061ef55957c3abd71614ef0f42f47 upstream.

The results of "access_ok()" can be mis-speculated.  The result is that
you can end speculatively:

	if (access_ok(from, size))
		// Right here

even for bad from/size combinations.  On first glance, it would be ideal
to just add a speculation barrier to "access_ok()" so that its results
can never be mis-speculated.

But there are lots of system calls just doing access_ok() via
"copy_to_user()" and friends (example: fstat() and friends).  Those are
generally not problematic because they do not _consume_ data from
userspace other than the pointer.  They are also very quick and common
system calls that should not be needlessly slowed down.

"copy_from_user()" on the other hand uses a user-controller pointer and
is frequently followed up with code that might affect caches.  Take
something like this:

	if (!copy_from_user(&amp;kernelvar, uptr, size))
		do_something_with(kernelvar);

If userspace passes in an evil 'uptr' that *actually* points to a kernel
addresses, and then do_something_with() has cache (or other)
side-effects, it could allow userspace to infer kernel data values.

Add a barrier to the common copy_from_user() code to prevent
mis-speculated values which happen after the copy.

Also add a stub for architectures that do not define barrier_nospec().
This makes the macro usable in generic code.

Since the barrier is now usable in generic code, the x86 #ifdef in the
BPF code can also go away.

Reported-by: Jordy Zomer &lt;jordyzomer@google.com&gt;
Suggested-by: Linus Torvalds &lt;torvalds@linuxfoundation.org&gt;
Signed-off-by: Dave Hansen &lt;dave.hansen@linux.intel.com&gt;
Reviewed-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Acked-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;   # BPF bits
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 74e19ef0ff8061ef55957c3abd71614ef0f42f47 upstream.

The results of "access_ok()" can be mis-speculated.  The result is that
you can end speculatively:

	if (access_ok(from, size))
		// Right here

even for bad from/size combinations.  On first glance, it would be ideal
to just add a speculation barrier to "access_ok()" so that its results
can never be mis-speculated.

But there are lots of system calls just doing access_ok() via
"copy_to_user()" and friends (example: fstat() and friends).  Those are
generally not problematic because they do not _consume_ data from
userspace other than the pointer.  They are also very quick and common
system calls that should not be needlessly slowed down.

"copy_from_user()" on the other hand uses a user-controller pointer and
is frequently followed up with code that might affect caches.  Take
something like this:

	if (!copy_from_user(&amp;kernelvar, uptr, size))
		do_something_with(kernelvar);

If userspace passes in an evil 'uptr' that *actually* points to a kernel
addresses, and then do_something_with() has cache (or other)
side-effects, it could allow userspace to infer kernel data values.

Add a barrier to the common copy_from_user() code to prevent
mis-speculated values which happen after the copy.

Also add a stub for architectures that do not define barrier_nospec().
This makes the macro usable in generic code.

Since the barrier is now usable in generic code, the x86 #ifdef in the
BPF code can also go away.

Reported-by: Jordy Zomer &lt;jordyzomer@google.com&gt;
Suggested-by: Linus Torvalds &lt;torvalds@linuxfoundation.org&gt;
Signed-off-by: Dave Hansen &lt;dave.hansen@linux.intel.com&gt;
Reviewed-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Acked-by: Daniel Borkmann &lt;daniel@iogearbox.net&gt;   # BPF bits
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'mm-hotfixes-stable-2023-02-13-13-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm</title>
<updated>2023-02-13T22:09:20+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2023-02-13T22:09:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f6feea56f66d34259c4222fa02e8171c4f2673d1'/>
<id>f6feea56f66d34259c4222fa02e8171c4f2673d1</id>
<content type='text'>
Pull misc fixes from Andrew Morton:
 "Twelve hotfixes, mostly against mm/.

  Five of these fixes are cc:stable"

* tag 'mm-hotfixes-stable-2023-02-13-13-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  of: reserved_mem: Have kmemleak ignore dynamically allocated reserved mem
  scripts/gdb: fix 'lx-current' for x86
  lib: parser: optimize match_NUMBER apis to use local array
  mm: shrinkers: fix deadlock in shrinker debugfs
  mm: hwpoison: support recovery from ksm_might_need_to_copy()
  kasan: fix Oops due to missing calls to kasan_arch_is_ready()
  revert "squashfs: harden sanity check in squashfs_read_xattr_id_table"
  fsdax: dax_unshare_iter() should return a valid length
  mm/gup: add folio to list when folio_isolate_lru() succeed
  aio: fix mremap after fork null-deref
  mailmap: add entry for Alexander Mikhalitsyn
  mm: extend max struct page size for kmsan
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull misc fixes from Andrew Morton:
 "Twelve hotfixes, mostly against mm/.

  Five of these fixes are cc:stable"

* tag 'mm-hotfixes-stable-2023-02-13-13-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  of: reserved_mem: Have kmemleak ignore dynamically allocated reserved mem
  scripts/gdb: fix 'lx-current' for x86
  lib: parser: optimize match_NUMBER apis to use local array
  mm: shrinkers: fix deadlock in shrinker debugfs
  mm: hwpoison: support recovery from ksm_might_need_to_copy()
  kasan: fix Oops due to missing calls to kasan_arch_is_ready()
  revert "squashfs: harden sanity check in squashfs_read_xattr_id_table"
  fsdax: dax_unshare_iter() should return a valid length
  mm/gup: add folio to list when folio_isolate_lru() succeed
  aio: fix mremap after fork null-deref
  mailmap: add entry for Alexander Mikhalitsyn
  mm: extend max struct page size for kmsan
</pre>
</div>
</content>
</entry>
</feed>
