linux-stable.git/lib/assoc_array.c, branch v7.2-rc6

assoc_array: trim the final shortcut word using the current chunk end

2026-07-23T15:23:45+00:00

assoc_array_walk() masks off the bits past shortcut->skip_to_level in the
word that contains skip_to_level, gated on
round_up(sc_level, ASSOC_ARRAY_KEY_CHUNK_SIZE) > skip_to_level.

That guard is wrong in two opposite ways:

 - When sc_level is word-aligned (every word after the first) round_up()
   is a no-op, so the guard is sc_level > skip_to_level and never fires for
   the word that holds skip_to_level.  A shortcut that spans more than one
   word and ends in the middle of its last word leaves that word untrimmed,
   and its stale high bits leak into the dissimilarity word and can steer
   the walk down the wrong descendant.

 - When sc_level is unaligned (the first word) and skip_to_level sits on
   the next chunk boundary, sc_level + CHUNK would exceed skip_to_level and
   fire the trim with shift = skip_to_level & CHUNK_MASK == 0, which clears
   the whole dissimilarity word and makes a differing shortcut compare
   equal.

Use the end of the chunk that contains sc_level instead:

	skip_to_level < round_down(sc_level, CHUNK) + CHUNK

For an aligned sc_level whose word holds skip_to_level this now fires (the
first bug); for an unaligned sc_level with skip_to_level on the following
boundary it does not, so shift is never 0 when the branch runs and the trim
never clears the whole word.

Fixes: 3cb989501c26 ("Add a generic associative array implementation.")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito 
Reviewed-by: Jarkko Sakkinen 
Tested-by: Jarkko Sakkinen 
Link: https://lore.kernel.org/r/20260719161505.2423935-4-michael.bommarito@gmail.com
Signed-off-by: Jarkko Sakkinen

Convert more 'alloc_obj' cases to default GFP_KERNEL arguments

2026-02-22T04:03:00+00:00

This converts some of the visually simpler cases that have been split
over multiple lines.  I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.

Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script.  I probably had made it a bit _too_ trivial.

So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.

The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.

Signed-off-by: Linus Torvalds

Convert 'alloc_flex' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51+00:00

This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.

As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.

Signed-off-by: Linus Torvalds

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51+00:00

This was done entirely with mindless brute force, using

    git grep -l '\

treewide: Replace kmalloc with kmalloc_obj for non-scalar types

2026-02-21T09:02:28+00:00

This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook

assoc_array: fix the return value in assoc_array_insert_mid_shortcut()

2024-03-12T20:09:23+00:00

Returning the edit variable is redundant because it is dereferenced right
before it is returned.  It would be better to return true.

Found by Linux Verification Center (linuxtesting.org) with Svace.

Link: https://lkml.kernel.org/r/20240307071717.5318-1-r.smirnov@omp.ru
Signed-off-by: Roman Smirnov 
Reviewed-by: Sergey Shtylyov 
Signed-off-by: Andrew Morton

assoc_array: Fix BUG_ON during garbage collect

2022-06-02T01:29:06+00:00

A rare BUG_ON triggered in assoc_array_gc:

    [3430308.818153] kernel BUG at lib/assoc_array.c:1609!

Which corresponded to the statement currently at line 1593 upstream:

    BUG_ON(assoc_array_ptr_is_meta(p));

Using the data from the core dump, I was able to generate a userspace
reproducer[1] and determine the cause of the bug.

[1]: https://github.com/brenns10/kernel_stuff/tree/master/assoc_array_gc

After running the iterator on the entire branch, an internal tree node
looked like the following:

    NODE (nr_leaves_on_branch: 3)
      SLOT [0] NODE (2 leaves)
      SLOT [1] NODE (1 leaf)
      SLOT [2..f] NODE (empty)

In the userspace reproducer, the pr_devel output when compressing this
node was:

    -- compress node 0x5607cc089380 --
    free=0, leaves=0
    [0] retain node 2/1 [nx 0]
    [1] fold node 1/1 [nx 0]
    [2] fold node 0/1 [nx 2]
    [3] fold node 0/2 [nx 2]
    [4] fold node 0/3 [nx 2]
    [5] fold node 0/4 [nx 2]
    [6] fold node 0/5 [nx 2]
    [7] fold node 0/6 [nx 2]
    [8] fold node 0/7 [nx 2]
    [9] fold node 0/8 [nx 2]
    [10] fold node 0/9 [nx 2]
    [11] fold node 0/10 [nx 2]
    [12] fold node 0/11 [nx 2]
    [13] fold node 0/12 [nx 2]
    [14] fold node 0/13 [nx 2]
    [15] fold node 0/14 [nx 2]
    after: 3

At slot 0, an internal node with 2 leaves could not be folded into the
node, because there was only one available slot (slot 0). Thus, the
internal node was retained. At slot 1, the node had one leaf, and was
able to be folded in successfully. The remaining nodes had no leaves,
and so were removed. By the end of the compression stage, there were 14
free slots, and only 3 leaf nodes. The tree was ascended and then its
parent node was compressed. When this node was seen, it could not be
folded, due to the internal node it contained.

The invariant for compression in this function is: whenever
nr_leaves_on_branch < ASSOC_ARRAY_FAN_OUT, the node should contain all
leaf nodes. The compression step currently cannot guarantee this, given
the corner case shown above.

To fix this issue, retry compression whenever we have retained a node,
and yet nr_leaves_on_branch < ASSOC_ARRAY_FAN_OUT. This second
compression will then allow the node in slot 1 to be folded in,
satisfying the invariant. Below is the output of the reproducer once the
fix is applied:

    -- compress node 0x560e9c562380 --
    free=0, leaves=0
    [0] retain node 2/1 [nx 0]
    [1] fold node 1/1 [nx 0]
    [2] fold node 0/1 [nx 2]
    [3] fold node 0/2 [nx 2]
    [4] fold node 0/3 [nx 2]
    [5] fold node 0/4 [nx 2]
    [6] fold node 0/5 [nx 2]
    [7] fold node 0/6 [nx 2]
    [8] fold node 0/7 [nx 2]
    [9] fold node 0/8 [nx 2]
    [10] fold node 0/9 [nx 2]
    [11] fold node 0/10 [nx 2]
    [12] fold node 0/11 [nx 2]
    [13] fold node 0/12 [nx 2]
    [14] fold node 0/13 [nx 2]
    [15] fold node 0/14 [nx 2]
    internal nodes remain despite enough space, retrying
    -- compress node 0x560e9c562380 --
    free=14, leaves=1
    [0] fold node 2/15 [nx 0]
    after: 3

Changes
=======
DH:
 - Use false instead of 0.
 - Reorder the inserted lines in a couple of places to put retained before
   next_slot.

ver #2)
 - Fix typo in pr_devel, correct comparison to "<="

Fixes: 3cb989501c26 ("Add a generic associative array implementation.")
Cc: 
Signed-off-by: Stephen Brennan 
Signed-off-by: David Howells 
cc: Andrew Morton 
cc: keyrings@vger.kernel.org
Link: https://lore.kernel.org/r/20220511225517.407935-1-stephen.s.brennan@oracle.com/ # v1
Link: https://lore.kernel.org/r/20220512215045.489140-1-stephen.s.brennan@oracle.com/ # v2
Reviewed-by: Jarkko Sakkinen 
Signed-off-by: Linus Torvalds

assoc_array: Avoid open coded arithmetic in allocator arguments

2021-10-13T19:54:13+00:00

As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

So, use the struct_size() helper to do the arithmetic instead of the
argument "size + count * size" in the kmalloc() and kzalloc() functions.

Also, take the opportunity to refactor the memcpy() calls to use the
struct_size() and flex_array_size() helpers.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments

Signed-off-by: Len Baker 
Reviewed-by: Gustavo A. R. Silva 
Signed-off-by: Gustavo A. R. Silva

Revert "lib: Revert use of fallthrough pseudo-keyword in lib/"

2020-11-18T20:15:17+00:00

This reverts commit 6a9dc5fd6170 ("lib: Revert use of fallthrough
pseudo-keyword in lib/")

Now that we can build arch/powerpc/boot/ free of -Wimplicit-fallthrough,
re-enable these fixes for lib/.

Signed-off-by: Nick Desaulniers 
Tested-by: Nathan Chancellor 
Reviewed-by: Nathan Chancellor 
Reviewed-by: Gustavo A. R. Silva 
Reviewed-by: Miguel Ojeda 
Link: https://github.com/ClangBuiltLinux/linux/issues/236
Signed-off-by: Gustavo A. R. Silva

lib: Revert use of fallthrough pseudo-keyword in lib/

2020-08-24T21:17:44+00:00

The following build error for powerpc64 was reported by Nathan Chancellor:

  "$ scripts/config --file arch/powerpc/configs/powernv_defconfig -e KERNEL_XZ

   $ make -skj"$(nproc)" ARCH=powerpc CROSS_COMPILE=powerpc64le-linux- distclean powernv_defconfig zImage
   ...
   In file included from arch/powerpc/boot/../../../lib/decompress_unxz.c:234,
                    from arch/powerpc/boot/decompress.c:38:
   arch/powerpc/boot/../../../lib/xz/xz_dec_stream.c: In function 'dec_main':
   arch/powerpc/boot/../../../lib/xz/xz_dec_stream.c:586:4: error: 'fallthrough' undeclared (first use in this function)
     586 |    fallthrough;
         |    ^~~~~~~~~~~

   This will end up affecting distribution configurations such as Debian
   and OpenSUSE according to my testing. I am not sure what the solution
   is, the PowerPC wrapper does not set -D__KERNEL__ so I am not sure
   that compiler_attributes.h can be safely included."

In order to avoid these sort of problems, it seems that the best
solution is to use /* fall through */ comments instead of the
fallthrough pseudo-keyword macro in lib/, for now.

Reported-by: Nathan Chancellor 
Fixes: df561f6688fe ("treewide: Use fallthrough pseudo-keyword")
Signed-off-by: Gustavo A. R. Silva 
Reviewed-and-tested-by: Nathan Chancellor 
Signed-off-by: Linus Torvalds