linux-stable.git/kernel, branch v6.6.103

cgroup/cpuset: Use static_branch_enable_cpuslocked() on cpusets_insane_config_key

2025-08-28T14:28:47+00:00

[ Upstream commit 65f97cc81b0adc5f49cf6cff5d874be0058e3f41 ]

The following lockdep splat was observed.

[  812.359086] ============================================
[  812.359089] WARNING: possible recursive locking detected
[  812.359097] --------------------------------------------
[  812.359100] runtest.sh/30042 is trying to acquire lock:
[  812.359105] ffffffffa7f27420 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_enable+0xe/0x20
[  812.359131]
[  812.359131] but task is already holding lock:
[  812.359134] ffffffffa7f27420 (cpu_hotplug_lock){++++}-{0:0}, at: cpuset_write_resmask+0x98/0xa70
     :
[  812.359267] Call Trace:
[  812.359272]  
[  812.359367]  cpus_read_lock+0x3c/0xe0
[  812.359382]  static_key_enable+0xe/0x20
[  812.359389]  check_insane_mems_config.part.0+0x11/0x30
[  812.359398]  cpuset_write_resmask+0x9f2/0xa70
[  812.359411]  cgroup_file_write+0x1c7/0x660
[  812.359467]  kernfs_fop_write_iter+0x358/0x530
[  812.359479]  vfs_write+0xabe/0x1250
[  812.359529]  ksys_write+0xf9/0x1d0
[  812.359558]  do_syscall_64+0x5f/0xe0

Since commit d74b27d63a8b ("cgroup/cpuset: Change cpuset_rwsem
and hotplug lock order"), the ordering of cpu hotplug lock
and cpuset_mutex had been reversed. That patch correctly
used the cpuslocked version of the static branch API to enable
cpusets_pre_enable_key and cpusets_enabled_key, but it didn't do the
same for cpusets_insane_config_key.

The cpusets_insane_config_key can be enabled in the
check_insane_mems_config() which is called from update_nodemask()
or cpuset_hotplug_update_tasks() with both cpu hotplug lock and
cpuset_mutex held. Deadlock can happen with a pending hotplug event that
tries to acquire the cpu hotplug write lock which will block further
cpus_read_lock() attempt from check_insane_mems_config(). Fix that by
switching to use static_branch_enable_cpuslocked().

Fixes: d74b27d63a8b ("cgroup/cpuset: Change cpuset_rwsem and hotplug lock order")
Signed-off-by: Waiman Long 
Reviewed-by: Juri Lelli 
Signed-off-by: Tejun Heo 
Signed-off-by: Sasha Levin

tracing: Limit access to parser->buffer when trace_get_user failed

2025-08-28T14:28:46+00:00

[ Upstream commit 6a909ea83f226803ea0e718f6e88613df9234d58 ]

When the length of the string written to set_ftrace_filter exceeds
FTRACE_BUFF_MAX, the following KASAN alarm will be triggered:

BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0
Read of size 1 at addr ffff0000d00bd5ba by task ash/165

CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty
Hardware name: linux,dummy-virt (DT)
Call trace:
 show_stack+0x34/0x50 (C)
 dump_stack_lvl+0xa0/0x158
 print_address_description.constprop.0+0x88/0x398
 print_report+0xb0/0x280
 kasan_report+0xa4/0xf0
 __asan_report_load1_noabort+0x20/0x30
 strsep+0x18c/0x1b0
 ftrace_process_regex.isra.0+0x100/0x2d8
 ftrace_regex_release+0x484/0x618
 __fput+0x364/0xa58
 ____fput+0x28/0x40
 task_work_run+0x154/0x278
 do_notify_resume+0x1f0/0x220
 el0_svc+0xec/0xf0
 el0t_64_sync_handler+0xa0/0xe8
 el0t_64_sync+0x1ac/0x1b0

The reason is that trace_get_user will fail when processing a string
longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.
Then an OOB access will be triggered in ftrace_regex_release->
ftrace_process_regex->strsep->strpbrk. We can solve this problem by
limiting access to parser->buffer when trace_get_user failed.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250813040232.1344527-1-pulehui@huaweicloud.com
Fixes: 8c9af478c06b ("ftrace: Handle commands when closing set_ftrace_filter file")
Signed-off-by: Pu Lehui 
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

tracing: Remove unneeded goto out logic

2025-08-28T14:28:46+00:00

[ Upstream commit c89504a703fb779052213add0e8ed642f4a4f1c8 ]

Several places in the trace.c file there's a goto out where the out is
simply a return. There's no reason to jump to the out label if it's not
doing any more logic but simply returning from the function.

Replace the goto outs with a return and remove the out labels.

Cc: Masami Hiramatsu 
Cc: Mark Rutland 
Cc: Mathieu Desnoyers 
Cc: Andrew Morton 
Link: https://lore.kernel.org/20250801203857.538726745@kernel.org
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ftrace: Also allocate and copy hash for reading of filter files

2025-08-28T14:28:45+00:00

commit bfb336cf97df7b37b2b2edec0f69773e06d11955 upstream.

Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds
the pointer to the global tracer hash to its iterator. Unlike the writer
that allocates a copy of the hash, the reader keeps the pointer to the
filter hashes. This is problematic because this pointer is static across
function calls that release the locks that can update the global tracer
hashes. This can cause UAF and similar bugs.

Allocate and copy the hash for reading the filter files like it is done
for the writers. This not only fixes UAF bugs, but also makes the code a
bit simpler as it doesn't have to differentiate when to free the
iterator's hash between writers and readers.

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu 
Cc: Mathieu Desnoyers 
Cc: Nathan Chancellor 
Cc: Linus Torvalds 
Link: https://lore.kernel.org/20250822183606.12962cc3@batman.local.home
Fixes: c20489dad156 ("ftrace: Assign iter->hash to filter or notrace hashes on seq read")
Closes: https://lore.kernel.org/all/20250813023044.2121943-1-wutengda@huaweicloud.com/
Closes: https://lore.kernel.org/all/20250822192437.GA458494@ax162/
Reported-by: Tengda Wu 
Tested-by: Tengda Wu 
Tested-by: Nathan Chancellor 
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Greg Kroah-Hartman

sched/fair: Fix frequency selection for non-invariant case

2025-08-28T14:28:43+00:00

commit e37617c8e53a1f7fcba6d5e1041f4fd8a2425c27 upstream.

Linus reported a ~50% performance regression on single-threaded
workloads on his AMD Ryzen system, and bisected it to:

  9c0b4bb7f630 ("sched/cpufreq: Rework schedutil governor performance estimation")

When frequency invariance is not enabled, get_capacity_ref_freq(policy)
is supposed to return the current frequency and the performance margin
applied by map_util_perf(), enabling the utilization to go above the
maximum compute capacity and to select a higher frequency than the current one.

After the changes in 9c0b4bb7f630, the performance margin was applied
earlier in the path to take into account utilization clampings and
we couldn't get a utilization higher than the maximum compute capacity,
and the CPU remained 'stuck' at lower frequencies.

To fix this, we must use a frequency above the current frequency to
get a chance to select a higher OPP when the current one becomes fully used.
Apply the same margin and return a frequency 25% higher than the current
one in order to switch to the next OPP before we fully use the CPU
at the current one.

[ mingo: Clarified the changelog. ]

Fixes: 9c0b4bb7f630 ("sched/cpufreq: Rework schedutil governor performance estimation")
Reported-by: Linus Torvalds 
Bisected-by: Linus Torvalds 
Reported-by: Wyes Karny 
Signed-off-by: Vincent Guittot 
Signed-off-by: Ingo Molnar 
Tested-by: Wyes Karny 
Link: https://lore.kernel.org/r/20240114183600.135316-1-vincent.guittot@linaro.org
Signed-off-by: Wentao Guan 
Signed-off-by: Greg Kroah-Hartman

cpufreq/schedutil: Use a fixed reference frequency

2025-08-28T14:28:42+00:00

commit b3edde44e5d4504c23a176819865cd603fd16d6c upstream.

cpuinfo.max_freq can change at runtime because of boost as an example. This
implies that the value could be different than the one that has been
used when computing the capacity of a CPU.

The new arch_scale_freq_ref() returns a fixed and coherent reference
frequency that can be used when computing a frequency based on utilization.

Use this arch_scale_freq_ref() when available and fallback to
policy otherwise.

Signed-off-by: Vincent Guittot 
Signed-off-by: Ingo Molnar 
Tested-by: Lukasz Luba 
Reviewed-by: Lukasz Luba 
Reviewed-by: Dietmar Eggemann 
Acked-by: Rafael J. Wysocki 
Acked-by: Viresh Kumar 
Link: https://lore.kernel.org/r/20231211104855.558096-4-vincent.guittot@linaro.org
Stable-dep-of: e37617c8e53a ("sched/fair: Fix frequency selection for non-invariant case")
Signed-off-by: Wentao Guan 
Signed-off-by: Greg Kroah-Hartman

mm: drop the assumption that VM_SHARED always implies writable

2025-08-28T14:28:39+00:00

From: Lorenzo Stoakes 

[ Upstream commit e8e17ee90eaf650c855adb0a3e5e965fd6692ff1 ]

Patch series "permit write-sealed memfd read-only shared mappings", v4.

The man page for fcntl() describing memfd file seals states the following
about F_SEAL_WRITE:-

    Furthermore, trying to create new shared, writable memory-mappings via
    mmap(2) will also fail with EPERM.

With emphasis on 'writable'.  In turns out in fact that currently the
kernel simply disallows all new shared memory mappings for a memfd with
F_SEAL_WRITE applied, rendering this documentation inaccurate.

This matters because users are therefore unable to obtain a shared mapping
to a memfd after write sealing altogether, which limits their usefulness.
This was reported in the discussion thread [1] originating from a bug
report [2].

This is a product of both using the struct address_space->i_mmap_writable
atomic counter to determine whether writing may be permitted, and the
kernel adjusting this counter when any VM_SHARED mapping is performed and
more generally implicitly assuming VM_SHARED implies writable.

It seems sensible that we should only update this mapping if VM_MAYWRITE
is specified, i.e.  whether it is possible that this mapping could at any
point be written to.

If we do so then all we need to do to permit write seals to function as
documented is to clear VM_MAYWRITE when mapping read-only.  It turns out
this functionality already exists for F_SEAL_FUTURE_WRITE - we can
therefore simply adapt this logic to do the same for F_SEAL_WRITE.

We then hit a chicken and egg situation in mmap_region() where the check
for VM_MAYWRITE occurs before we are able to clear this flag.  To work
around this, perform this check after we invoke call_mmap(), with careful
consideration of error paths.

Thanks to Andy Lutomirski for the suggestion!

[1]:https://lore.kernel.org/all/20230324133646.16101dfa666f253c4715d965@linux-foundation.org/
[2]:https://bugzilla.kernel.org/show_bug.cgi?id=217238

This patch (of 3):

There is a general assumption that VMAs with the VM_SHARED flag set are
writable.  If the VM_MAYWRITE flag is not set, then this is simply not the
case.

Update those checks which affect the struct address_space->i_mmap_writable
field to explicitly test for this by introducing
[vma_]is_shared_maywrite() helper functions.

This remains entirely conservative, as the lack of VM_MAYWRITE guarantees
that the VMA cannot be written to.

Link: https://lkml.kernel.org/r/cover.1697116581.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/d978aefefa83ec42d18dfa964ad180dbcde34795.1697116581.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes 
Suggested-by: Andy Lutomirski 
Reviewed-by: Jan Kara 
Cc: Alexander Viro 
Cc: Christian Brauner 
Cc: Hugh Dickins 
Cc: Matthew Wilcox (Oracle) 
Cc: Mike Kravetz 
Cc: Muchun Song 
Signed-off-by: Andrew Morton 
Cc: stable@vger.kernel.org
[isaacmanjarres: resolved merge conflicts due to
due to refactoring that happened in upstream commit
5de195060b2e ("mm: resolve faulty mmap_region() error path behaviour")]
Signed-off-by: Isaac J. Manjarres 
Signed-off-by: Greg Kroah-Hartman

tracing: fprobe-event: Sanitize wildcard for fprobe event name

2025-08-28T14:28:34+00:00

commit ec879e1a0be8007aa232ffedcf6a6445dfc1a3d7 upstream.

Fprobe event accepts wildcards for the target functions, but unless user
specifies its event name, it makes an event with the wildcards.

  /sys/kernel/tracing # echo 'f mutex*' >> dynamic_events
  /sys/kernel/tracing # cat dynamic_events
  f:fprobes/mutex*__entry mutex*
  /sys/kernel/tracing # ls events/fprobes/
  enable         filter         mutex*__entry

To fix this, replace the wildcard ('*') with an underscore.

Link: https://lore.kernel.org/all/175535345114.282990.12294108192847938710.stgit@devnote2/

Fixes: 334e5519c375 ("tracing/probes: Add fprobe events for tracing function entry and exit.")
Signed-off-by: Masami Hiramatsu (Google) 
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

rcu: Fix racy re-initialization of irq_work causing hangs

2025-08-28T14:28:32+00:00

commit 61399e0c5410567ef60cb1cda34cca42903842e3 upstream.

RCU re-initializes the deferred QS irq work everytime before attempting
to queue it. However there are situations where the irq work is
attempted to be queued even though it is already queued. In that case
re-initializing messes-up with the irq work queue that is about to be
handled.

The chances for that to happen are higher when the architecture doesn't
support self-IPIs and irq work are then all lazy, such as with the
following sequence:

1) rcu_read_unlock() is called when IRQs are disabled and there is a
   grace period involving blocked tasks on the node. The irq work
   is then initialized and queued.

2) The related tasks are unblocked and the CPU quiescent state
   is reported. rdp->defer_qs_iw_pending is reset to DEFER_QS_IDLE,
   allowing the irq work to be requeued in the future (note the previous
   one hasn't fired yet).

3) A new grace period starts and the node has blocked tasks.

4) rcu_read_unlock() is called when IRQs are disabled again. The irq work
   is re-initialized (but it's queued! and its node is cleared) and
   requeued. Which means it's requeued to itself.

5) The irq work finally fires with the tick. But since it was requeued
   to itself, it loops and hangs.

Fix this with initializing the irq work only once before the CPU boots.

Fixes: b41642c87716 ("rcu: Fix rcu_read_unlock() deadloop due to IRQ work")
Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-lkp/202508071303.c1134cce-lkp@intel.com
Signed-off-by: Frederic Weisbecker 
Reviewed-by: Joel Fernandes 
Signed-off-by: Neeraj Upadhyay (AMD) 
Signed-off-by: Greg Kroah-Hartman

module: Prevent silent truncation of module name in delete_module(2)

2025-08-28T14:28:28+00:00

[ Upstream commit a6323bd4e611567913e23df5b58f2d4e4da06789 ]

Passing a module name longer than MODULE_NAME_LEN to the delete_module
syscall results in its silent truncation. This really isn't much of
a problem in practice, but it could theoretically lead to the removal of an
incorrect module. It is more sensible to return ENAMETOOLONG or ENOENT in
such a case.

Update the syscall to return ENOENT, as documented in the delete_module(2)
man page to mean "No module by that name exists." This is appropriate
because a module with a name longer than MODULE_NAME_LEN cannot be loaded
in the first place.

Signed-off-by: Petr Pavlu 
Reviewed-by: Daniel Gomez 
Link: https://lore.kernel.org/r/20250630143535.267745-2-petr.pavlu@suse.com
Signed-off-by: Daniel Gomez 
Signed-off-by: Sasha Levin