linux-stable.git/kernel, branch v6.14.2

tracing: Do not use PERF enums when perf is not defined

2025-04-10T12:44:48+00:00

commit 8eb1518642738c6892bd629b46043513a3bf1a6a upstream.

An update was made to up the module ref count when a synthetic event is
registered for both trace and perf events. But if perf is not configured
in, the perf enums used will cause the kernel to fail to build.

Cc: Masami Hiramatsu 
Cc: Mathieu Desnoyers 
Cc: Douglas Raillard 
Link: https://lore.kernel.org/20250323152151.528b5ced@batman.local.home
Fixes: 21581dd4e7ff ("tracing: Ensure module defining synth event cannot be unloaded while tracing")
Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-kbuild-all/202503232230.TeREVy8R-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Greg Kroah-Hartman

tracing: Verify event formats that have "%*p.."

2025-04-10T12:44:47+00:00

commit ea8d7647f9ddf1f81e2027ed305299797299aa03 upstream.

The trace event verifier checks the formats of trace events to make sure
that they do not point at memory that is not in the trace event itself or
in data that will never be freed. If an event references data that was
allocated when the event triggered and that same data is freed before the
event is read, then the kernel can crash by reading freed memory.

The verifier runs at boot up (or module load) and scans the print formats
of the events and checks their arguments to make sure that dereferenced
pointers are safe. If the format uses "%*p.." the verifier will ignore it,
and that could be dangerous. Cover this case as well.

Also add to the sample code a use case of "%*pbl".

Link: https://lore.kernel.org/all/bcba4d76-2c3f-4d11-baf0-02905db953dd@oracle.com/

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu 
Cc: Mathieu Desnoyers 
Fixes: 5013f454a352c ("tracing: Add check of trace event print fmts for dereferencing pointers")
Link: https://lore.kernel.org/20250327195311.2d89ec66@gandalf.local.home
Reported-by: Libo Chen 
Reviewed-by: Libo Chen 
Tested-by: Libo Chen 
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Greg Kroah-Hartman

tracing/osnoise: Fix possible recursive locking for cpus_read_lock()

2025-04-10T12:44:47+00:00

commit 7e6b3fcc9c5294aeafed0dbe1a09a1bc899bd0f2 upstream.

Lockdep reports this deadlock log:

osnoise: could not start sampling thread
============================================
WARNING: possible recursive locking detected
--------------------------------------------
       CPU0
       ----
  lock(cpu_hotplug_lock);
  lock(cpu_hotplug_lock);

 Call Trace:
  
  print_deadlock_bug+0x282/0x3c0
  __lock_acquire+0x1610/0x29a0
  lock_acquire+0xcb/0x2d0
  cpus_read_lock+0x49/0x120
  stop_per_cpu_kthreads+0x7/0x60
  start_kthread+0x103/0x120
  osnoise_hotplug_workfn+0x5e/0x90
  process_one_work+0x44f/0xb30
  worker_thread+0x33e/0x5e0
  kthread+0x206/0x3b0
  ret_from_fork+0x31/0x50
  ret_from_fork_asm+0x11/0x20
  

This is the deadlock scenario:
osnoise_hotplug_workfn()
  guard(cpus_read_lock)();      // first lock call
  start_kthread(cpu)
    if (IS_ERR(kthread)) {
      stop_per_cpu_kthreads(); {
        cpus_read_lock();      // second lock call. Cause the AA deadlock
      }
    }

It is not necessary to call stop_per_cpu_kthreads() which stops osnoise
kthread for every other CPUs in the system if a failure occurs during
hotplug of a certain CPU.
For start_per_cpu_kthreads(), if the start_kthread() call fails,
this function calls stop_per_cpu_kthreads() to handle the error.
Therefore, similarly, there is no need to call stop_per_cpu_kthreads()
again within start_kthread().
So just remove stop_per_cpu_kthreads() from start_kthread to solve this issue.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250321095249.2739397-1-ranxiaokai627@163.com
Fixes: c8895e271f79 ("trace/osnoise: Support hotplug operations")
Signed-off-by: Ran Xiaokai 
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Greg Kroah-Hartman

tracing: Fix synth event printk format for str fields

2025-04-10T12:44:47+00:00

commit 4d38328eb442dc06aec4350fd9594ffa6488af02 upstream.

The printk format for synth event uses "%.*s" to print string fields,
but then only passes the pointer part as var arg.

Replace %.*s with %s as the C string is guaranteed to be null-terminated.

The output in print fmt should never have been updated as __get_str()
handles the string limit because it can access the length of the string in
the string meta data that is saved in the ring buffer.

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu 
Cc: Mathieu Desnoyers 
Fixes: 8db4d6bfbbf92 ("tracing: Change synthetic event string format to limit printed length")
Link: https://lore.kernel.org/20250325165202.541088-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard 
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Greg Kroah-Hartman

tracing: Ensure module defining synth event cannot be unloaded while tracing

2025-04-10T12:44:46+00:00

commit 21581dd4e7ff6c07d0ab577e3c32b13a74b31522 upstream.

Currently, using synth_event_delete() will fail if the event is being
used (tracing in progress), but that is normally done in the module exit
function. At that stage, failing is problematic as returning a non-zero
status means the module will become locked (impossible to unload or
reload again).

Instead, ensure the module exit function does not get called in the
first place by increasing the module refcnt when the event is enabled.

Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers 
Fixes: 35ca5207c2d11 ("tracing: Add synthetic event command generation functions")
Link: https://lore.kernel.org/20250318180906.226841-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard 
Acked-by: Masami Hiramatsu (Google) 
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Greg Kroah-Hartman

tracing: Fix use-after-free in print_graph_function_flags during tracer switching

2025-04-10T12:44:46+00:00

commit 7f81f27b1093e4895e87b74143c59c055c3b1906 upstream.

Kairui reported a UAF issue in print_graph_function_flags() during
ftrace stress testing [1]. This issue can be reproduced if puting a
'mdelay(10)' after 'mutex_unlock(&trace_types_lock)' in s_start(),
and executing the following script:

  $ echo function_graph > current_tracer
  $ cat trace > /dev/null &
  $ sleep 5  # Ensure the 'cat' reaches the 'mdelay(10)' point
  $ echo timerlat > current_tracer

The root cause lies in the two calls to print_graph_function_flags
within print_trace_line during each s_show():

  * One through 'iter->trace->print_line()';
  * Another through 'event->funcs->trace()', which is hidden in
    print_trace_fmt() before print_trace_line returns.

Tracer switching only updates the former, while the latter continues
to use the print_line function of the old tracer, which in the script
above is print_graph_function_flags.

Moreover, when switching from the 'function_graph' tracer to the
'timerlat' tracer, s_start only calls graph_trace_close of the
'function_graph' tracer to free 'iter->private', but does not set
it to NULL. This provides an opportunity for 'event->funcs->trace()'
to use an invalid 'iter->private'.

To fix this issue, set 'iter->private' to NULL immediately after
freeing it in graph_trace_close(), ensuring that an invalid pointer
is not passed to other tracers. Additionally, clean up the unnecessary
'iter->private = NULL' during each 'cat trace' when using wakeup and
irqsoff tracers.

 [1] https://lore.kernel.org/all/20231112150030.84609-1-ryncsn@gmail.com/

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu 
Cc: Mathieu Desnoyers 
Cc: Zheng Yejian 
Link: https://lore.kernel.org/20250320122137.23635-1-wutengda@huaweicloud.com
Fixes: eecb91b9f98d ("tracing: Fix memleak due to race between current_tracer and trace")
Closes: https://lore.kernel.org/all/CAMgjq7BW79KDSCyp+tZHjShSzHsScSiJxn5ffskp-QzVM06fxw@mail.gmail.com/
Reported-by: Kairui Song 
Signed-off-by: Tengda Wu 
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Greg Kroah-Hartman

uprobes/x86: Harden uretprobe syscall trampoline check

2025-04-10T12:44:44+00:00

commit fa6192adc32f4fdfe5b74edd5b210e12afd6ecc0 upstream.

Jann reported a possible issue when trampoline_check_ip returns
address near the bottom of the address space that is allowed to
call into the syscall if uretprobes are not set up:

   https://lore.kernel.org/bpf/202502081235.5A6F352985@keescook/T/#m9d416df341b8fbc11737dacbcd29f0054413cbbf

Though the mmap minimum address restrictions will typically prevent
creating mappings there, let's make sure uretprobe syscall checks
for that.

Fixes: ff474a78cef5 ("uprobe: Add uretprobe syscall to speed up return probe")
Reported-by: Jann Horn 
Signed-off-by: Jiri Olsa 
Signed-off-by: Ingo Molnar 
Reviewed-by: Oleg Nesterov 
Reviewed-by: Kees Cook 
Acked-by: Andrii Nakryiko 
Acked-by: Masami Hiramatsu (Google) 
Acked-by: Alexei Starovoitov 
Cc: Andy Lutomirski 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250212220433.3624297-1-jolsa@kernel.org
Signed-off-by: Greg Kroah-Hartman

perf/core: Fix child_total_time_enabled accounting bug at task exit

2025-04-10T12:44:42+00:00

[ Upstream commit a3c3c66670cee11eb13aa43905904bf29cb92d32 ]

The perf events code fails to account for total_time_enabled of
inactive events.

Here is a failure case for accounting total_time_enabled for
CPU PMU events:

  sudo ./perf stat -vvv -e armv8_pmuv3_0/event=0x08/ -e armv8_pmuv3_1/event=0x08/ -- stress-ng --pthread=2 -t 2s
  ...

  armv8_pmuv3_0/event=0x08/: 1138698008 2289429840 2174835740
  armv8_pmuv3_1/event=0x08/: 1826791390 1950025700 847648440
                             `          `          `
                             `          `          > total_time_running with child
                             `          > total_time_enabled with child
                             > count with child

  Performance counter stats for 'stress-ng --pthread=2 -t 2s':

       1,138,698,008      armv8_pmuv3_0/event=0x08/                                               (94.99%)
       1,826,791,390      armv8_pmuv3_1/event=0x08/                                               (43.47%)

The two events above are opened on two different CPU PMUs, for example,
each event is opened for a cluster in an Arm big.LITTLE system, they
will never run on the same CPU.  In theory, the total enabled time should
be same for both events, as two events are opened and closed together.

As the result show, the two events' total enabled time including
child event is different (2289429840 vs 1950025700).

This is because child events are not accounted properly
if a event is INACTIVE state when the task exits:

  perf_event_exit_event()
   `> perf_remove_from_context()
     `> __perf_remove_from_context()
       `> perf_child_detach()   -> Accumulate child_total_time_enabled
         `> list_del_event()    -> Update child event's time

The problem is the time accumulation happens prior to child event's
time updating. Thus, it misses to account the last period's time when
the event exits.

The perf core layer follows the rule that timekeeping is tied to state
change. To address the issue, make __perf_remove_from_context()
handle the task exit case by passing 'DETACH_EXIT' to it and
invoke perf_event_state() for state alongside with accounting the time.

Then, perf_child_detach() populates the time into the parent's time metrics.

After this patch, the bug is fixed:

  sudo ./perf stat -vvv -e armv8_pmuv3_0/event=0x08/ -e armv8_pmuv3_1/event=0x08/ -- stress-ng --pthread=2 -t 10s
  ...
  armv8_pmuv3_0/event=0x08/: 15396770398 32157963940 21898169000
  armv8_pmuv3_1/event=0x08/: 22428964974 32157963940 10259794940

   Performance counter stats for 'stress-ng --pthread=2 -t 10s':

      15,396,770,398      armv8_pmuv3_0/event=0x08/                                               (68.10%)
      22,428,964,974      armv8_pmuv3_1/event=0x08/                                               (31.90%)

[ mingo: Clarified the changelog. ]

Fixes: ef54c1a476aef ("perf: Rework perf_event_exit_event()")
Suggested-by: Peter Zijlstra 
Signed-off-by: Yeoreum Yun 
Signed-off-by: Ingo Molnar 
Tested-by: Leo Yan 
Link: https://lore.kernel.org/r/20250326082003.1630986-1-yeoreum.yun@arm.com
Signed-off-by: Sasha Levin

ring-buffer: Fix bytes_dropped calculation issue

2025-04-10T12:44:36+00:00

[ Upstream commit c73f0b69648501978e8b3e8fa7eef7f4197d0481 ]

The calculation of bytes-dropped and bytes_dropped_nested is reversed.
Although it does not affect the final calculation of total_dropped,
it should still be modified.

Link: https://lore.kernel.org/20250223070106.6781-1-yangfeng59949@163.com
Fixes: 6c43e554a2a5 ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Feng Yang 
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Sasha Levin

reboot: reboot, not shutdown, on hw_protection_reboot timeout

2025-04-10T12:44:32+00:00

[ Upstream commit bbf0ec4f57e0a34983ca25f00ec90f4765572d78 ]

hw_protection_shutdown() will kick off an orderly shutdown and if that
takes longer than a configurable amount of time, an emergency shutdown
will occur.

Recently, hw_protection_reboot() was added for those systems that don't
implement a proper shutdown and are better served by rebooting and having
the boot firmware worry about doing something about the critical
condition.

On timeout of the orderly reboot of hw_protection_reboot(), the system
would go into shutdown, instead of reboot.  This is not a good idea, as
going into shutdown was explicitly not asked for.

Fix this by always doing an emergency reboot if hw_protection_reboot() is
called and the orderly reboot takes too long.

Link: https://lkml.kernel.org/r/20250217-hw_protection-reboot-v3-2-e1c09b090c0c@pengutronix.de
Fixes: 79fa723ba84c ("reboot: Introduce thermal_zone_device_critical_reboot()")
Signed-off-by: Ahmad Fatoum 
Reviewed-by: Tzung-Bi Shih 
Reviewed-by: Matti Vaittinen 
Cc: Benson Leung 
Cc: Daniel Lezcano 
Cc: Fabio Estevam 
Cc: Guenter Roeck 
Cc: Jonathan Corbet 
Cc: Liam Girdwood 
Cc: Lukasz Luba 
Cc: Mark Brown 
Cc: Matteo Croce 
Cc: "Rafael J. Wysocki" 
Cc: Rob Herring (Arm) 
Cc: Rui Zhang 
Cc: Sascha Hauer 
Cc: "Serge E. Hallyn" 
Signed-off-by: Andrew Morton 
Signed-off-by: Sasha Levin