linux-stable.git/kernel, branch v5.9.10 Linux kernel stable tree cpufreq: Introduce governor flags 2020-11-18T18:22:30+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2020-11-10T17:25:57+00:00 c539b683b0035d707986835ce5e8335bc2bcea8f commit 9a2a9ebc0a758d887ee06e067e9f7f0b36ff7574 upstream. A new cpufreq governor flag will be added subsequently, so replace the bool dynamic_switching fleid in struct cpufreq_governor with a flags field and introduce CPUFREQ_GOV_DYNAMIC_SWITCHING to set for the "dynamic switching" governors instead of it. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 9a2a9ebc0a758d887ee06e067e9f7f0b36ff7574 upstream.

A new cpufreq governor flag will be added subsequently, so replace
the bool dynamic_switching fleid in struct cpufreq_governor with a
flags field and introduce CPUFREQ_GOV_DYNAMIC_SWITCHING to set for
the "dynamic switching" governors instead of it.

No intentional functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
swiotlb: fix "x86: Don't panic if can not alloc buffer for swiotlb" 2020-11-18T18:22:30+00:00 Stefano Stabellini stefano.stabellini@xilinx.com 2020-10-27T00:02:14+00:00 f3cbfd01568c779447bbf4b613ddc35123185ac3 commit e9696d259d0fb5d239e8c28ca41089838ea76d13 upstream. kernel/dma/swiotlb.c:swiotlb_init gets called first and tries to allocate a buffer for the swiotlb. It does so by calling memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE); If the allocation must fail, no_iotlb_memory is set. Later during initialization swiotlb-xen comes in (drivers/xen/swiotlb-xen.c:xen_swiotlb_init) and given that io_tlb_start is != 0, it thinks the memory is ready to use when actually it is not. When the swiotlb is actually needed, swiotlb_tbl_map_single gets called and since no_iotlb_memory is set the kernel panics. Instead, if swiotlb-xen.c:xen_swiotlb_init knew the swiotlb hadn't been initialized, it would do the initialization itself, which might still succeed. Fix the panic by setting io_tlb_start to 0 on swiotlb initialization failure, and also by setting no_iotlb_memory to false on swiotlb initialization success. Fixes: ac2cbab21f31 ("x86: Don't panic if can not alloc buffer for swiotlb") Reported-by: Elliott Mitchell <ehem+xen@m5p.com> Tested-by: Elliott Mitchell <ehem+xen@m5p.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e9696d259d0fb5d239e8c28ca41089838ea76d13 upstream.

kernel/dma/swiotlb.c:swiotlb_init gets called first and tries to
allocate a buffer for the swiotlb. It does so by calling

  memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);

If the allocation must fail, no_iotlb_memory is set.

Later during initialization swiotlb-xen comes in
(drivers/xen/swiotlb-xen.c:xen_swiotlb_init) and given that io_tlb_start
is != 0, it thinks the memory is ready to use when actually it is not.

When the swiotlb is actually needed, swiotlb_tbl_map_single gets called
and since no_iotlb_memory is set the kernel panics.

Instead, if swiotlb-xen.c:xen_swiotlb_init knew the swiotlb hadn't been
initialized, it would do the initialization itself, which might still
succeed.

Fix the panic by setting io_tlb_start to 0 on swiotlb initialization
failure, and also by setting no_iotlb_memory to false on swiotlb
initialization success.

Fixes: ac2cbab21f31 ("x86: Don't panic if can not alloc buffer for swiotlb")

Reported-by: Elliott Mitchell <ehem+xen@m5p.com>
Tested-by: Elliott Mitchell <ehem+xen@m5p.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
don't dump the threads that had been already exiting when zapped. 2020-11-18T18:22:29+00:00 Al Viro viro@zeniv.linux.org.uk 2020-10-28T20:39:49+00:00 c5d5981b27fb0c60a554517480802055c08b3f50 commit 77f6ab8b7768cf5e6bdd0e72499270a0671506ee upstream. Coredump logics needs to report not only the registers of the dumping thread, but (since 2.5.43) those of other threads getting killed. Doing that might require extra state saved on the stack in asm glue at kernel entry; signal delivery logics does that (we need to be able to save sigcontext there, at the very least) and so does seccomp. That covers all callers of do_coredump(). Secondary threads get hit with SIGKILL and caught as soon as they reach exit_mm(), which normally happens in signal delivery, so those are also fine most of the time. Unfortunately, it is possible to end up with secondary zapped when it has already entered exit(2) (or, worse yet, is oopsing). In those cases we reach exit_mm() when mm->core_state is already set, but the stack contents is not what we would have in signal delivery. At least on two architectures (alpha and m68k) it leads to infoleaks - we end up with a chunk of kernel stack written into coredump, with the contents consisting of normal C stack frames of the call chain leading to exit_mm() instead of the expected copy of userland registers. In case of alpha we leak 312 bytes of stack. Other architectures (including the regset-using ones) might have similar problems - the normal user of regsets is ptrace and the state of tracee at the time of such calls is special in the same way signal delivery is. Note that had the zapper gotten to the exiting thread slightly later, it wouldn't have been included into coredump anyway - we skip the threads that have already cleared their ->mm. So let's pretend that zapper always loses the race. IOW, have exit_mm() only insert into the dumper list if we'd gotten there from handling a fatal signal[*] As the result, the callers of do_exit() that have *not* gone through get_signal() are not seen by coredump logics as secondary threads. Which excludes voluntary exit()/oopsen/traps/etc. The dumper thread itself is unaffected by that, so seccomp is fine. [*] originally I intended to add a new flag in tsk->flags, but ebiederman pointed out that PF_SIGNALED is already doing just what we need. Cc: stable@vger.kernel.org Fixes: d89f3847def4 ("[PATCH] thread-aware coredumps, 2.5.43-C3") History-tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 77f6ab8b7768cf5e6bdd0e72499270a0671506ee upstream.

Coredump logics needs to report not only the registers of the dumping
thread, but (since 2.5.43) those of other threads getting killed.

Doing that might require extra state saved on the stack in asm glue at
kernel entry; signal delivery logics does that (we need to be able to
save sigcontext there, at the very least) and so does seccomp.

That covers all callers of do_coredump().  Secondary threads get hit with
SIGKILL and caught as soon as they reach exit_mm(), which normally happens
in signal delivery, so those are also fine most of the time.  Unfortunately,
it is possible to end up with secondary zapped when it has already entered
exit(2) (or, worse yet, is oopsing).  In those cases we reach exit_mm()
when mm->core_state is already set, but the stack contents is not what
we would have in signal delivery.

At least on two architectures (alpha and m68k) it leads to infoleaks - we
end up with a chunk of kernel stack written into coredump, with the contents
consisting of normal C stack frames of the call chain leading to exit_mm()
instead of the expected copy of userland registers.  In case of alpha we
leak 312 bytes of stack.  Other architectures (including the regset-using
ones) might have similar problems - the normal user of regsets is ptrace
and the state of tracee at the time of such calls is special in the same
way signal delivery is.

Note that had the zapper gotten to the exiting thread slightly later,
it wouldn't have been included into coredump anyway - we skip the threads
that have already cleared their ->mm.  So let's pretend that zapper always
loses the race.  IOW, have exit_mm() only insert into the dumper list if
we'd gotten there from handling a fatal signal[*]

As the result, the callers of do_exit() that have *not* gone through get_signal()
are not seen by coredump logics as secondary threads.  Which excludes voluntary
exit()/oopsen/traps/etc.  The dumper thread itself is unaffected by that,
so seccomp is fine.

[*] originally I intended to add a new flag in tsk->flags, but ebiederman pointed
out that PF_SIGNALED is already doing just what we need.

Cc: stable@vger.kernel.org
Fixes: d89f3847def4 ("[PATCH] thread-aware coredumps, 2.5.43-C3")
History-tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
reboot: fix overflow parsing reboot cpu number 2020-11-18T18:22:27+00:00 Matteo Croce mcroce@microsoft.com 2020-11-14T06:52:07+00:00 d2af8b61a6b7dde4bd5096ffcbaaee1b99ef9a8c commit df5b0ab3e08a156701b537809914b339b0daa526 upstream. Limit the CPU number to num_possible_cpus(), because setting it to a value lower than INT_MAX but higher than NR_CPUS produces the following error on reboot and shutdown: BUG: unable to handle page fault for address: ffffffff90ab1bb0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0 Oops: 0000 [#1] SMP CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm #110 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:migrate_to_reboot_cpu+0xe/0x60 Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c RSP: 0018:ffffc90000013e08 EFLAGS: 00010246 RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000 RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0 RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000 FS: 00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __do_sys_reboot.cold+0x34/0x5b do_syscall_64+0x2d/0x40 Fixes: 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic kernel") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Fabian Frederick <fabf@skynet.be> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Kees Cook <keescook@chromium.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Robin Holt <robinmholt@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201103214025.116799-3-mcroce@linux.microsoft.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit df5b0ab3e08a156701b537809914b339b0daa526 upstream.

Limit the CPU number to num_possible_cpus(), because setting it to a
value lower than INT_MAX but higher than NR_CPUS produces the following
error on reboot and shutdown:

    BUG: unable to handle page fault for address: ffffffff90ab1bb0
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    PGD 1c09067 P4D 1c09067 PUD 1c0a063 PMD 0
    Oops: 0000 [#1] SMP
    CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 5.9.0-rc8-kvm #110
    Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
    RIP: 0010:migrate_to_reboot_cpu+0xe/0x60
    Code: ea ea 00 48 89 fa 48 c7 c7 30 57 f1 81 e9 fa ef ff ff 66 2e 0f 1f 84 00 00 00 00 00 53 8b 1d d5 ea ea 00 e8 14 33 fe ff 89 da <48> 0f a3 15 ea fc bd 00 48 89 d0 73 29 89 c2 c1 e8 06 65 48 8b 3c
    RSP: 0018:ffffc90000013e08 EFLAGS: 00010246
    RAX: ffff88801f0a0000 RBX: 0000000077359400 RCX: 0000000000000000
    RDX: 0000000077359400 RSI: 0000000000000002 RDI: ffffffff81c199e0
    RBP: ffffffff81c1e3c0 R08: ffff88801f41f000 R09: ffffffff81c1e348
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
    R13: 00007f32bedf8830 R14: 00000000fee1dead R15: 0000000000000000
    FS:  00007f32bedf8980(0000) GS:ffff88801f480000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: ffffffff90ab1bb0 CR3: 000000001d057000 CR4: 00000000000006a0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
      __do_sys_reboot.cold+0x34/0x5b
      do_syscall_64+0x2d/0x40

Fixes: 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic kernel")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103214025.116799-3-mcroce@linux.microsoft.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint" 2020-11-18T18:22:27+00:00 Matteo Croce mcroce@microsoft.com 2020-11-14T06:52:02+00:00 566fd53d6df36eed3da6fb3007e285ad13abd988 commit 8b92c4ff4423aa9900cf838d3294fcade4dbda35 upstream. Patch series "fix parsing of reboot= cmdline", v3. The parsing of the reboot= cmdline has two major errors: - a missing bound check can crash the system on reboot - parsing of the cpu number only works if specified last Fix both. This patch (of 2): This reverts commit 616feab753972b97. kstrtoint() and simple_strtoul() have a subtle difference which makes them non interchangeable: if a non digit character is found amid the parsing, the former will return an error, while the latter will just stop parsing, e.g. simple_strtoul("123xyx") = 123. The kernel cmdline reboot= argument allows to specify the CPU used for rebooting, with the syntax `s####` among the other flags, e.g. "reboot=warm,s31,force", so if this flag is not the last given, it's silently ignored as well as the subsequent ones. Fixes: 616feab75397 ("kernel/reboot.c: convert simple_strtoul to kstrtoint") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Petr Mladek <pmladek@suse.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mike Rapoport <rppt@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Robin Holt <robinmholt@gmail.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201103214025.116799-2-mcroce@linux.microsoft.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8b92c4ff4423aa9900cf838d3294fcade4dbda35 upstream.

Patch series "fix parsing of reboot= cmdline", v3.

The parsing of the reboot= cmdline has two major errors:

 - a missing bound check can crash the system on reboot

 - parsing of the cpu number only works if specified last

Fix both.

This patch (of 2):

This reverts commit 616feab753972b97.

kstrtoint() and simple_strtoul() have a subtle difference which makes
them non interchangeable: if a non digit character is found amid the
parsing, the former will return an error, while the latter will just
stop parsing, e.g.  simple_strtoul("123xyx") = 123.

The kernel cmdline reboot= argument allows to specify the CPU used for
rebooting, with the syntax `s####` among the other flags, e.g.
"reboot=warm,s31,force", so if this flag is not the last given, it's
silently ignored as well as the subsequent ones.

Fixes: 616feab75397 ("kernel/reboot.c: convert simple_strtoul to kstrtoint")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103214025.116799-2-mcroce@linux.microsoft.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
futex: Don't enable IRQs unconditionally in put_pi_state() 2020-11-18T18:22:26+00:00 Dan Carpenter dan.carpenter@oracle.com 2020-11-06T08:52:05+00:00 07b4f1246b72343569e28b67efd47569fe62ec56 commit 1e106aa3509b86738769775969822ffc1ec21bf4 upstream. The exit_pi_state_list() function calls put_pi_state() with IRQs disabled and is not expecting that IRQs will be enabled inside the function. Use the _irqsave() variant so that IRQs are restored to the original state instead of being enabled unconditionally. Fixes: 153fbd1226fb ("futex: Fix more put_pi_state() vs. exit_pi_state_list() races") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201106085205.GA1159983@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 1e106aa3509b86738769775969822ffc1ec21bf4 upstream.

The exit_pi_state_list() function calls put_pi_state() with IRQs disabled
and is not expecting that IRQs will be enabled inside the function.

Use the _irqsave() variant so that IRQs are restored to the original state
instead of being enabled unconditionally.

Fixes: 153fbd1226fb ("futex: Fix more put_pi_state() vs. exit_pi_state_list() races")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201106085205.GA1159983@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
perf: Fix event multiplexing for exclusive groups 2020-11-18T18:22:23+00:00 Peter Zijlstra peterz@infradead.org 2020-10-29T15:29:53+00:00 7dce450ca840e852f582bb624c1443201e10d29d [ Upstream commit 2714c3962f304d031d5016c963c4b459337b0749 ] Commit 9e6302056f80 ("perf: Use hrtimers for event multiplexing") placed the hrtimer (re)start call in the wrong place. Instead of capturing all scheduling failures, it only considered the PMU failure. The result is that groups using perf_event_attr::exclusive are no longer rotated. Fixes: 9e6302056f80 ("perf: Use hrtimers for event multiplexing") Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201029162902.038667689@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 2714c3962f304d031d5016c963c4b459337b0749 ]

Commit 9e6302056f80 ("perf: Use hrtimers for event multiplexing")
placed the hrtimer (re)start call in the wrong place.  Instead of
capturing all scheduling failures, it only considered the PMU failure.

The result is that groups using perf_event_attr::exclusive are no
longer rotated.

Fixes: 9e6302056f80 ("perf: Use hrtimers for event multiplexing")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201029162902.038667689@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
perf: Simplify group_sched_in() 2020-11-18T18:22:23+00:00 Peter Zijlstra peterz@infradead.org 2020-10-29T15:29:15+00:00 3a5a900bb247a3b33f1df2bb488876be34402d59 [ Upstream commit 251ff2d49347793d348babcff745289b11910e96 ] Collate the error paths. Code duplication only leads to divergence and extra bugs. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201029162901.972161394@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 251ff2d49347793d348babcff745289b11910e96 ]

Collate the error paths. Code duplication only leads to divergence and
extra bugs.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201029162901.972161394@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
perf: Fix get_recursion_context() 2020-11-18T18:22:22+00:00 Peter Zijlstra peterz@infradead.org 2020-10-30T11:49:45+00:00 159dbc4dd743512c518953246cb2bf4aa4c6f862 [ Upstream commit ce0f17fc93f63ee91428af10b7b2ddef38cd19e5 ] One should use in_serving_softirq() to detect SoftIRQ context. Fixes: 96f6d4444302 ("perf_counter: avoid recursion") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201030151955.120572175@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit ce0f17fc93f63ee91428af10b7b2ddef38cd19e5 ]

One should use in_serving_softirq() to detect SoftIRQ context.

Fixes: 96f6d4444302 ("perf_counter: avoid recursion")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201030151955.120572175@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
kernel/watchdog: fix watchdog_allowed_mask not used warning 2020-11-18T18:22:22+00:00 Santosh Sivaraj santosh@fossix.org 2020-11-14T06:52:10+00:00 24bd009423fb9656c6b6c61556d0ba9b662b1db1 [ Upstream commit e7e046155af04cdca5e1157f28b07e1651eb317b ] Define watchdog_allowed_mask only when SOFTLOCKUP_DETECTOR is enabled. Fixes: 7feeb9cd4f5b ("watchdog/sysctl: Clean up sysctl variable name space") Signed-off-by: Santosh Sivaraj <santosh@fossix.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20201106015025.1281561-1-santosh@fossix.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit e7e046155af04cdca5e1157f28b07e1651eb317b ]

Define watchdog_allowed_mask only when SOFTLOCKUP_DETECTOR is enabled.

Fixes: 7feeb9cd4f5b ("watchdog/sysctl: Clean up sysctl variable name space")
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20201106015025.1281561-1-santosh@fossix.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>