linux-stable.git/kernel, branch v5.7.9

bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()

2020-07-16T06:13:30+00:00

commit 63960260457a02af2a6cb35d75e6bdb17299c882 upstream.

When evaluating access control over kallsyms visibility, credentials at
open() time need to be used, not the "current" creds (though in BPF's
case, this has likely always been the same). Plumb access to associated
file->f_cred down through bpf_dump_raw_ok() and its callers now that
kallsysm_show_value() has been refactored to take struct cred.

Cc: Alexei Starovoitov 
Cc: Daniel Borkmann 
Cc: bpf@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 7105e828c087 ("bpf: allow for correlation of maps and helpers in dump")
Signed-off-by: Kees Cook 
Signed-off-by: Greg Kroah-Hartman

kprobes: Do not expose probe addresses to non-CAP_SYSLOG

2020-07-16T06:13:30+00:00

commit 60f7bb66b88b649433bf700acfc60c3f24953871 upstream.

The kprobe show() functions were using "current"'s creds instead
of the file opener's creds for kallsyms visibility. Fix to use
seq_file->file->f_cred.

Cc: Masami Hiramatsu 
Cc: stable@vger.kernel.org
Fixes: 81365a947de4 ("kprobes: Show address of kprobes if kallsyms does")
Fixes: ffb9bd68ebdb ("kprobes: Show blacklist addresses as same as kallsyms does")
Signed-off-by: Kees Cook 
Signed-off-by: Greg Kroah-Hartman

module: Do not expose section addresses to non-CAP_SYSLOG

2020-07-16T06:13:30+00:00

commit b25a7c5af9051850d4f3d93ca500056ab6ec724b upstream.

The printing of section addresses in /sys/module/*/sections/* was not
using the correct credentials to evaluate visibility.

Before:

 # cat /sys/module/*/sections/.*text
 0xffffffffc0458000
 ...
 # capsh --drop=CAP_SYSLOG -- -c "cat /sys/module/*/sections/.*text"
 0xffffffffc0458000
 ...

After:

 # cat /sys/module/*/sections/*.text
 0xffffffffc0458000
 ...
 # capsh --drop=CAP_SYSLOG -- -c "cat /sys/module/*/sections/.*text"
 0x0000000000000000
 ...

Additionally replaces the existing (safe) /proc/modules check with
file->f_cred for consistency.

Reported-by: Dominik Czarnota 
Fixes: be71eda5383f ("module: Fix display of wrong module .text address")
Cc: stable@vger.kernel.org
Tested-by: Jessica Yu 
Acked-by: Jessica Yu 
Signed-off-by: Kees Cook 
Signed-off-by: Greg Kroah-Hartman

module: Refactor section attr into bin attribute

2020-07-16T06:13:29+00:00

commit ed66f991bb19d94cae5d38f77de81f96aac7813f upstream.

In order to gain access to the open file's f_cred for kallsym visibility
permission checks, refactor the module section attributes to use the
bin_attribute instead of attribute interface. Additionally removes the
redundant "name" struct member.

Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman 
Tested-by: Jessica Yu 
Acked-by: Jessica Yu 
Signed-off-by: Kees Cook 
Signed-off-by: Greg Kroah-Hartman

kallsyms: Refactor kallsyms_show_value() to take cred

2020-07-16T06:13:29+00:00

commit 160251842cd35a75edfb0a1d76afa3eb674ff40a upstream.

In order to perform future tests against the cred saved during open(),
switch kallsyms_show_value() to operate on a cred, and have all current
callers pass current_cred(). This makes it very obvious where callers
are checking the wrong credential in their "read" contexts. These will
be fixed in the coming patches.

Additionally switch return value to bool, since it is always used as a
direct permission check, not a 0-on-success, negative-on-error style
function return.

Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook 
Signed-off-by: Greg Kroah-Hartman

bpf: Do not allow btf_ctx_access with __int128 types

2020-07-16T06:13:18+00:00

[ Upstream commit a9b59159d338d414acaa8e2f569d129d51c76452 ]

To ensure btf_ctx_access() is safe the verifier checks that the BTF
arg type is an int, enum, or pointer. When the function does the
BTF arg lookup it uses the calculation 'arg = off / 8'  using the
fact that registers are 8B. This requires that the first arg is
in the first reg, the second in the second, and so on. However,
for __int128 the arg will consume two registers by default LLVM
implementation. So this will cause the arg layout assumed by the
'arg = off / 8' calculation to be incorrect.

Because __int128 is uncommon this patch applies the easiest fix and
will force int types to be sizeof(u64) or smaller so that they will
fit in a single register.

v2: remove unneeded parens per Andrii's feedback

Fixes: 9e15db66136a1 ("bpf: Implement accurate raw_tp context access via BTF")
Signed-off-by: John Fastabend 
Signed-off-by: Daniel Borkmann 
Acked-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/159303723962.11287.13309537171132420717.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin

sched/core: Check cpus_mask, not cpus_ptr in __set_cpus_allowed_ptr(), to fix mask corruption

2020-07-16T06:13:17+00:00

[ Upstream commit fd844ba9ae59b51e34e77105d79f8eca780b3bd6 ]

This function is concerned with the long-term CPU mask, not the
transitory mask the task might have while migrate disabled.  Before
this patch, if a task was migrate-disabled at the time
__set_cpus_allowed_ptr() was called, and the new mask happened to be
equal to the CPU that the task was running on, then the mask update
would be lost.

Signed-off-by: Scott Wood 
Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Ingo Molnar 
Link: https://lkml.kernel.org/r/20200617121742.cpxppyi7twxmpin7@linutronix.de
Signed-off-by: Sasha Levin

padata: upgrade smp_mb__after_atomic to smp_mb in padata_do_serial

2020-07-09T07:39:37+00:00

commit e04ec0de61c1eb9693179093e83ab8ca68a30d08 upstream.

A 5.7 kernel hangs during a tcrypt test of padata that waits for an AEAD
request to finish.  This is only seen on large machines running many
concurrent requests.

The issue is that padata never serializes the request.  The removal of
the reorder_objects atomic missed that the memory barrier in
padata_do_serial() depends on it.

Upgrade the barrier from smp_mb__after_atomic to smp_mb to get correct
ordering again.

Fixes: 3facced7aeed1 ("padata: remove reorder_objects")
Signed-off-by: Daniel Jordan 
Cc: Steffen Klassert 
Cc: linux-kernel@vger.kernel.org
Cc: 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

task_work: teach task_work_add() to do signal_wake_up()

2020-07-09T07:39:31+00:00

[ Upstream commit e91b48162332480f5840902268108bb7fb7a44c7 ]

So that the target task will exit the wait_event_interruptible-like
loop and call task_work_run() asap.

The patch turns "bool notify" into 0,TWA_RESUME,TWA_SIGNAL enum, the
new TWA_SIGNAL flag implies signal_wake_up().  However, it needs to
avoid the race with recalc_sigpending(), so the patch also adds the
new JOBCTL_TASK_WORK bit included in JOBCTL_PENDING_MASK.

TODO: once this patch is merged we need to change all current users
of task_work_add(notify = true) to use TWA_RESUME.

Cc: stable@vger.kernel.org # v5.7
Acked-by: Peter Zijlstra (Intel) 
Signed-off-by: Oleg Nesterov 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

kgdb: Avoid suspicious RCU usage warning

2020-07-09T07:39:30+00:00

[ Upstream commit 440ab9e10e2e6e5fd677473ee6f9e3af0f6904d6 ]

At times when I'm using kgdb I see a splat on my console about
suspicious RCU usage.  I managed to come up with a case that could
reproduce this that looked like this:

  WARNING: suspicious RCU usage
  5.7.0-rc4+ #609 Not tainted
  -----------------------------
  kernel/pid.c:395 find_task_by_pid_ns() needs rcu_read_lock() protection!

  other info that might help us debug this:

    rcu_scheduler_active = 2, debug_locks = 1
  3 locks held by swapper/0/1:
   #0: ffffff81b6b8e988 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x13c
   #1: ffffffd01109e9e8 (dbg_master_lock){....}-{2:2}, at: kgdb_cpu_enter+0x20c/0x7ac
   #2: ffffffd01109ea90 (dbg_slave_lock){....}-{2:2}, at: kgdb_cpu_enter+0x3ec/0x7ac

  stack backtrace:
  CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc4+ #609
  Hardware name: Google Cheza (rev3+) (DT)
  Call trace:
   dump_backtrace+0x0/0x1b8
   show_stack+0x1c/0x24
   dump_stack+0xd4/0x134
   lockdep_rcu_suspicious+0xf0/0x100
   find_task_by_pid_ns+0x5c/0x80
   getthread+0x8c/0xb0
   gdb_serial_stub+0x9d4/0xd04
   kgdb_cpu_enter+0x284/0x7ac
   kgdb_handle_exception+0x174/0x20c
   kgdb_brk_fn+0x24/0x30
   call_break_hook+0x6c/0x7c
   brk_handler+0x20/0x5c
   do_debug_exception+0x1c8/0x22c
   el1_sync_handler+0x3c/0xe4
   el1_sync+0x7c/0x100
   rpmh_rsc_probe+0x38/0x420
   platform_drv_probe+0x94/0xb4
   really_probe+0x134/0x300
   driver_probe_device+0x68/0x100
   __device_attach_driver+0x90/0xa8
   bus_for_each_drv+0x84/0xcc
   __device_attach+0xb4/0x13c
   device_initial_probe+0x18/0x20
   bus_probe_device+0x38/0x98
   device_add+0x38c/0x420

If I understand properly we should just be able to blanket kgdb under
one big RCU read lock and the problem should go away.  We'll add it to
the beast-of-a-function known as kgdb_cpu_enter().

With this I no longer get any splats and things seem to work fine.

Signed-off-by: Douglas Anderson 
Link: https://lore.kernel.org/r/20200602154729.v2.1.I70e0d4fd46d5ed2aaf0c98a355e8e1b7a5bb7e4e@changeid
Signed-off-by: Daniel Thompson 
Signed-off-by: Sasha Levin