linux-stable.git/kernel, branch v5.5.10

pid: Fix error return value in some cases

2020-03-18T06:19:12+00:00

commit b26ebfe12f34f372cf041c6f801fa49c3fb382c5 upstream.

Recent changes to alloc_pid() allow the pid number to be specified on
the command line.  If set_tid_size is set, then the code scanning the
levels will hard-set retval to -EPERM, overriding it's previous -ENOMEM
value.

After the code scanning the levels, there are error returns that do not
set retval, assuming it is still set to -ENOMEM.

So set retval back to -ENOMEM after scanning the levels.

Fixes: 49cb2fc42ce4 ("fork: extend clone3() to support setting a PID")
Signed-off-by: Corey Minyard 
Acked-by: Christian Brauner 
Cc: Andrei Vagin 
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Oleg Nesterov 
Cc: Adrian Reber 
Cc:  # 5.5
Link: https://lore.kernel.org/r/20200306172314.12232-1-minyard@acm.org
[christian.brauner@ubuntu.com: fixup commit message]
Signed-off-by: Christian Brauner 
Signed-off-by: Greg Kroah-Hartman

ftrace: Return the first found result in lookup_rec()

2020-03-18T06:19:12+00:00

commit d9815bff6b379ff46981bea9dfeb146081eab314 upstream.

It appears that ip ranges can overlap so. In that case lookup_rec()
returns whatever results it got last even if it found nothing in last
searched page.

This breaks an obscure livepatch late module patching usecase:
  - load livepatch
  - load the patched module
  - unload livepatch
  - try to load livepatch again

To fix this return from lookup_rec() as soon as it found the record
containing searched-for ip. This used to be this way prior lookup_rec()
introduction.

Link: http://lkml.kernel.org/r/20200306174317.21699-1-asavkov@redhat.com

Cc: stable@vger.kernel.org
Fixes: 7e16f581a817 ("ftrace: Separate out functionality from ftrace_location_range()")
Signed-off-by: Artem Savkov 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

workqueue: don't use wq_select_unbound_cpu() for bound works

2020-03-18T06:19:09+00:00

commit aa202f1f56960c60e7befaa0f49c72b8fa11b0a8 upstream.

wq_select_unbound_cpu() is designed for unbound workqueues only, but
it's wrongly called when using a bound workqueue too.

Fixing this ensures work queued to a bound workqueue with
cpu=WORK_CPU_UNBOUND always runs on the local CPU.

Before, that would happen only if wq_unbound_cpumask happened to include
it (likely almost always the case), or was empty, or we got lucky with
forced round-robin placement.  So restricting
/sys/devices/virtual/workqueue/cpumask to a small subset of a machine's
CPUs would cause some bound work items to run unexpectedly there.

Fixes: ef557180447f ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Hillf Danton 
[dj: massage changelog]
Signed-off-by: Daniel Jordan 
Cc: Tejun Heo 
Cc: Lai Jiangshan 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

cgroup: Iterate tasks that did not finish do_exit()

2020-03-18T06:19:07+00:00

commit 9c974c77246460fa6a92c18554c3311c8c83c160 upstream.

PF_EXITING is set earlier than actual removal from css_set when a task
is exitting. This can confuse cgroup.procs readers who see no PF_EXITING
tasks, however, rmdir is checking against css_set membership so it can
transitionally fail with EBUSY.

Fix this by listing tasks that weren't unlinked from css_set active
lists.
It may happen that other users of the task iterator (without
CSS_TASK_ITER_PROCS) spot a PF_EXITING task before cgroup_exit(). This
is equal to the state before commit c03cd7738a83 ("cgroup: Include dying
leaders with live threads in PROCS iterations") but it may be reviewed
later.

Reported-by: Suren Baghdasaryan 
Fixes: c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations")
Signed-off-by: Michal Koutný 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

cgroup: cgroup_procs_next should increase position index

2020-03-18T06:19:07+00:00

commit 2d4ecb030dcc90fb725ecbfc82ce5d6c37906e0e upstream.

If seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output:

1) dd bs=1 skip output of each 2nd elements
$ dd if=/sys/fs/cgroup/cgroup.procs bs=8 count=1
2
3
4
5
1+0 records in
1+0 records out
8 bytes copied, 0,000267297 s, 29,9 kB/s
[test@localhost ~]$ dd if=/sys/fs/cgroup/cgroup.procs bs=1 count=8
2
4 <<< NB! 3 was skipped
6 <<<    ... and 5 too
8 <<<    ... and 7
8+0 records in
8+0 records out
8 bytes copied, 5,2123e-05 s, 153 kB/s

 This happen because __cgroup_procs_start() makes an extra
 extra cgroup_procs_next() call

2) read after lseek beyond end of file generates whole last line.
3) read after lseek into middle of last line generates
expected rest of last line and unexpected whole line once again.

Additionally patch removes an extra position index changes in
__cgroup_procs_start()

Cc: stable@vger.kernel.org
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

cgroup: fix psi_show() crash on 32bit ino archs

2020-03-18T06:19:06+00:00

commit 190ecb190a9cd8c0599d8499b901e3c32e87966a upstream.

Similar to the commit d7495343228f ("cgroup: fix incorrect
WARN_ON_ONCE() in cgroup_setup_root()"), cgroup_id(root_cgrp) does not
equal to 1 on 32bit ino archs which triggers all sorts of issues with
psi_show() on s390x. For example,

 BUG: KASAN: slab-out-of-bounds in collect_percpu_times+0x2d0/
 Read of size 4 at addr 000000001e0ce000 by task read_all/3667
 collect_percpu_times+0x2d0/0x798
 psi_show+0x7c/0x2a8
 seq_read+0x2ac/0x830
 vfs_read+0x92/0x150
 ksys_read+0xe2/0x188
 system_call+0xd8/0x2b4

Fix it by using cgroup_ino().

Fixes: 743210386c03 ("cgroup: use cgrp->kn->id as the cgroup ID")
Signed-off-by: Qian Cai 
Acked-by: Johannes Weiner 
Signed-off-by: Tejun Heo 
Cc: stable@vger.kernel.org # v5.5
Signed-off-by: Greg Kroah-Hartman

cgroup: memcg: net: do not associate sock with unrelated cgroup

2020-03-18T06:18:59+00:00

[ Upstream commit e876ecc67db80dfdb8e237f71e5b43bb88ae549c ]

We are testing network memory accounting in our setup and noticed
inconsistent network memory usage and often unrelated cgroups network
usage correlates with testing workload. On further inspection, it
seems like mem_cgroup_sk_alloc() and cgroup_sk_alloc() are broken in
irq context specially for cgroup v1.

mem_cgroup_sk_alloc() and cgroup_sk_alloc() can be called in irq context
and kind of assumes that this can only happen from sk_clone_lock()
and the source sock object has already associated cgroup. However in
cgroup v1, where network memory accounting is opt-in, the source sock
can be unassociated with any cgroup and the new cloned sock can get
associated with unrelated interrupted cgroup.

Cgroup v2 can also suffer if the source sock object was created by
process in the root cgroup or if sk_alloc() is called in irq context.
The fix is to just do nothing in interrupt.

WARNING: Please note that about half of the TCP sockets are allocated
from the IRQ context, so, memory used by such sockets will not be
accouted by the memcg.

The stack trace of mem_cgroup_sk_alloc() from IRQ-context:

CPU: 70 PID: 12720 Comm: ssh Tainted:  5.6.0-smp-DEV #1
Hardware name: ...
Call Trace:
 
 dump_stack+0x57/0x75
 mem_cgroup_sk_alloc+0xe9/0xf0
 sk_clone_lock+0x2a7/0x420
 inet_csk_clone_lock+0x1b/0x110
 tcp_create_openreq_child+0x23/0x3b0
 tcp_v6_syn_recv_sock+0x88/0x730
 tcp_check_req+0x429/0x560
 tcp_v6_rcv+0x72d/0xa40
 ip6_protocol_deliver_rcu+0xc9/0x400
 ip6_input+0x44/0xd0
 ? ip6_protocol_deliver_rcu+0x400/0x400
 ip6_rcv_finish+0x71/0x80
 ipv6_rcv+0x5b/0xe0
 ? ip6_sublist_rcv+0x2e0/0x2e0
 process_backlog+0x108/0x1e0
 net_rx_action+0x26b/0x460
 __do_softirq+0x104/0x2a6
 do_softirq_own_stack+0x2a/0x40
 
 do_softirq.part.19+0x40/0x50
 __local_bh_enable_ip+0x51/0x60
 ip6_finish_output2+0x23d/0x520
 ? ip6table_mangle_hook+0x55/0x160
 __ip6_finish_output+0xa1/0x100
 ip6_finish_output+0x30/0xd0
 ip6_output+0x73/0x120
 ? __ip6_finish_output+0x100/0x100
 ip6_xmit+0x2e3/0x600
 ? ipv6_anycast_cleanup+0x50/0x50
 ? inet6_csk_route_socket+0x136/0x1e0
 ? skb_free_head+0x1e/0x30
 inet6_csk_xmit+0x95/0xf0
 __tcp_transmit_skb+0x5b4/0xb20
 __tcp_send_ack.part.60+0xa3/0x110
 tcp_send_ack+0x1d/0x20
 tcp_rcv_state_process+0xe64/0xe80
 ? tcp_v6_connect+0x5d1/0x5f0
 tcp_v6_do_rcv+0x1b1/0x3f0
 ? tcp_v6_do_rcv+0x1b1/0x3f0
 __release_sock+0x7f/0xd0
 release_sock+0x30/0xa0
 __inet_stream_connect+0x1c3/0x3b0
 ? prepare_to_wait+0xb0/0xb0
 inet_stream_connect+0x3b/0x60
 __sys_connect+0x101/0x120
 ? __sys_getsockopt+0x11b/0x140
 __x64_sys_connect+0x1a/0x20
 do_syscall_64+0x51/0x200
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The stack trace of mem_cgroup_sk_alloc() from IRQ-context:
Fixes: 2d7580738345 ("mm: memcontrol: consolidate cgroup socket tracking")
Fixes: d979a39d7242 ("cgroup: duplicate cgroup reference when cloning sockets")
Signed-off-by: Shakeel Butt 
Reviewed-by: Roman Gushchin 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sched/fair: Fix statistics for find_idlest_group()

2020-03-12T06:18:47+00:00

commit 289de35984815576793f579ec27248609e75976e upstream.

sgs->group_weight is not set while gathering statistics in
update_sg_wakeup_stats(). This means that a group can be classified as
fully busy with 0 running tasks if utilization is high enough.

This path is mainly used for fork and exec.

Fixes: 57abff067a08 ("sched/fair: Rework find_idlest_group()")
Signed-off-by: Vincent Guittot 
Signed-off-by: Ingo Molnar 
Acked-by: Peter Zijlstra 
Acked-by: Mel Gorman 
Link: https://lore.kernel.org/r/20200218144534.4564-1-vincent.guittot@linaro.org
Signed-off-by: Greg Kroah-Hartman

blktrace: fix dereference after null check

2020-03-12T06:18:23+00:00

[ Upstream commit 153031a301bb07194e9c37466cfce8eacb977621 ]

There was a recent change in blktrace.c that added a RCU protection to
`q->blk_trace` in order to fix a use-after-free issue during access.

However the change missed an edge case that can lead to dereferencing of
`bt` pointer even when it's NULL:

Coverity static analyzer marked this as a FORWARD_NULL issue with CID
1460458.

```
/kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store()
1898            ret = 0;
1899            if (bt == NULL)
1900                    ret = blk_trace_setup_queue(q, bdev);
1901
1902            if (ret == 0) {
1903                    if (attr == &dev_attr_act_mask)
>>>     CID 1460458:  Null pointer dereferences  (FORWARD_NULL)
>>>     Dereferencing null pointer "bt".
1904                            bt->act_mask = value;
1905                    else if (attr == &dev_attr_pid)
1906                            bt->pid = value;
1907                    else if (attr == &dev_attr_start_lba)
1908                            bt->start_lba = value;
1909                    else if (attr == &dev_attr_end_lba)
```

Added a reassignment with RCU annotation to fix the issue.

Fixes: c780e86dd48 ("blktrace: Protect q->blk_trace with RCU")
Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei 
Reviewed-by: Bob Liu 
Reviewed-by: Steven Rostedt (VMware) 
Signed-off-by: Cengiz Can 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

locking/lockdep: Fix lockdep_stats indentation problem

2020-03-05T15:45:25+00:00

commit a030f9767da1a6bbcec840fc54770eb11c2414b6 upstream.

It was found that two lines in the output of /proc/lockdep_stats have
indentation problem:

  # cat /proc/lockdep_stats
     :
   in-process chains:                   25057
   stack-trace entries:                137827 [max: 524288]
   number of stack traces:        7973
   number of stack hash chains:   6355
   combined max dependencies:      1356414598
   hardirq-safe locks:                     57
   hardirq-unsafe locks:                 1286
     :

All the numbers displayed in /proc/lockdep_stats except the two stack
trace numbers are formatted with a field with of 11. To properly align
all the numbers, a field width of 11 is now added to the two stack
trace numbers.

Fixes: 8c779229d0f4 ("locking/lockdep: Report more stack trace statistics")
Signed-off-by: Waiman Long 
Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Bart Van Assche 
Link: https://lkml.kernel.org/r/20191211213139.29934-1-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman