linux-stable.git/kernel, branch v4.4.170

mm, devm_memremap_pages: kill mapping "System RAM" support

2019-01-13T09:05:32+00:00

commit 06489cfbd915ff36c8e36df27f1c2dc60f97ca56 upstream.

Given the fact that devm_memremap_pages() requires a percpu_ref that is
torn down by devm_memremap_pages_release() the current support for mapping
RAM is broken.

Support for remapping "System RAM" has been broken since the beginning and
there is no existing user of this this code path, so just kill the support
and make it an explicit error.

This cleanup also simplifies a follow-on patch to fix the error path when
setting a devm release action for devm_memremap_pages_release() fails.

Link: http://lkml.kernel.org/r/154275557997.76910.14689813630968180480.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams 
Reviewed-by: "Jérôme Glisse" 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Logan Gunthorpe 
Cc: Balbir Singh 
Cc: Michal Hocko 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm, devm_memremap_pages: mark devm_memremap_pages() EXPORT_SYMBOL_GPL

2019-01-13T09:05:32+00:00

commit 808153e1187fa77ac7d7dad261ff476888dcf398 upstream.

devm_memremap_pages() is a facility that can create struct page entries
for any arbitrary range and give drivers the ability to subvert core
aspects of page management.

Specifically the facility is tightly integrated with the kernel's memory
hotplug functionality.  It injects an altmap argument deep into the
architecture specific vmemmap implementation to allow allocating from
specific reserved pages, and it has Linux specific assumptions about page
structure reference counting relative to get_user_pages() and
get_user_pages_fast().  It was an oversight and a mistake that this was
not marked EXPORT_SYMBOL_GPL from the outset.

Again, devm_memremap_pagex() exposes and relies upon core kernel internal
assumptions and will continue to evolve along with 'struct page', memory
hotplug, and support for new memory types / topologies.  Only an in-kernel
GPL-only driver is expected to keep up with this ongoing evolution.  This
interface, and functionality derived from this interface, is not suitable
for kernel-external drivers.

Link: http://lkml.kernel.org/r/154275557457.76910.16923571232582744134.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams 
Reviewed-by: Christoph Hellwig 
Acked-by: Michal Hocko 
Cc: "Jérôme Glisse" 
Cc: Balbir Singh 
Cc: Logan Gunthorpe 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

fork: record start_time late

2019-01-13T09:05:32+00:00

commit 7b55851367136b1efd84d98fea81ba57a98304cf upstream.

This changes the fork(2) syscall to record the process start_time after
initializing the basic task structure but still before making the new
process visible to user-space.

Technically, we could record the start_time anytime during fork(2).  But
this might lead to scenarios where a start_time is recorded long before
a process becomes visible to user-space.  For instance, with
userfaultfd(2) and TLS, user-space can delay the execution of fork(2)
for an indefinite amount of time (and will, if this causes network
access, or similar).

By recording the start_time late, it much closer reflects the point in
time where the process becomes live and can be observed by other
processes.

Lastly, this makes it much harder for user-space to predict and control
the start_time they get assigned.  Previously, user-space could fork a
process and stall it in copy_thread_tls() before its pid is allocated,
but after its start_time is recorded.  This can be misused to later-on
cycle through PIDs and resume the stalled fork(2) yielding a process
that has the same pid and start_time as a process that existed before.
This can be used to circumvent security systems that identify processes
by their pid+start_time combination.

Even though user-space was always aware that start_time recording is
flaky (but several projects are known to still rely on start_time-based
identification), changing the start_time to be recorded late will help
mitigate existing attacks and make it much harder for user-space to
control the start_time a process gets assigned.

Reported-by: Jann Horn 
Signed-off-by: Tom Gundersen 
Signed-off-by: David Herrmann 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

tracing: Fix memory leak of instance function hash filters

2018-12-21T13:09:51+00:00

commit 2840f84f74035e5a535959d5f17269c69fa6edc5 upstream.

The following commands will cause a memory leak:

 # cd /sys/kernel/tracing
 # mkdir instances/foo
 # echo schedule > instance/foo/set_ftrace_filter
 # rmdir instances/foo

The reason is that the hashes that hold the filters to set_ftrace_filter and
set_ftrace_notrace are not freed if they contain any data on the instance
and the instance is removed.

Found by kmemleak detector.

Cc: stable@vger.kernel.org
Fixes: 591dffdade9f ("ftrace: Allow for function tracing instance to filter functions")
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

tracing: Fix memory leak in set_trigger_filter()

2018-12-21T13:09:51+00:00

commit 3cec638b3d793b7cacdec5b8072364b41caeb0e1 upstream.

When create_event_filter() fails in set_trigger_filter(), the filter may
still be allocated and needs to be freed. The caller expects the
data->filter to be updated with the new filter, even if the new filter
failed (we could add an error message by setting set_str parameter of
create_event_filter(), but that's another update).

But because the error would just exit, filter was left hanging and
nothing could free it.

Found by kmemleak detector.

Cc: stable@vger.kernel.org
Fixes: bac5fb97a173a ("tracing: Add and use generic set_trigger_filter() implementation")
Reviewed-by: Tom Zanussi 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

timer/debug: Change /proc/timer_list from 0444 to 0400

2018-12-21T13:09:49+00:00

[ Upstream commit 8e7df2b5b7f245c9bd11064712db5cb69044a362 ]

While it uses %pK, there's still few reasons to read this file
as non-root.

Suggested-by: Linus Torvalds 
Acked-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Sasha Levin

mm: replace get_user_pages() write/force parameters with gup_flags

2018-12-17T20:55:16+00:00

commit 768ae309a96103ed02eb1e111e838c87854d8b51 upstream.

This removes the 'write' and 'force' from get_user_pages() and replaces
them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers
as use of this flag can result in surprising behaviour (and hence bugs)
within the mm subsystem.

Signed-off-by: Lorenzo Stoakes 
Acked-by: Christian König 
Acked-by: Jesper Nilsson 
Acked-by: Michal Hocko 
Reviewed-by: Jan Kara 
Signed-off-by: Linus Torvalds 
[bwh: Backported to 4.4:
 - Drop changes in rapidio, vchiq, goldfish
 - Keep the "write" variable in amdgpu_ttm_tt_pin_userptr() as it's still
   needed
 - Also update calls from various other places that now use
   get_user_pages_remote() upstream, which were updated there by commit
   9beae1ea8930 "mm: replace get_user_pages_remote() write/force ..."
 - Also update calls from hfi1 and ipath
 - Adjust context]
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

posix-timers: Sanitize overrun handling

2018-12-17T20:55:15+00:00

commit 78c9c4dfbf8c04883941445a195276bb4bb92c76 upstream.

The posix timer overrun handling is broken because the forwarding functions
can return a huge number of overruns which does not fit in an int. As a
consequence timer_getoverrun(2) and siginfo::si_overrun can turn into
random number generators.

The k_clock::timer_forward() callbacks return a 64 bit value now. Make
k_itimer::ti_overrun[_last] 64bit as well, so the kernel internal
accounting is correct. 3Remove the temporary (int) casts.

Add a helper function which clamps the overrun value returned to user space
via timer_getoverrun(2) or siginfo::si_overrun limited to a positive value
between 0 and INT_MAX. INT_MAX is an indicator for user space that the
overrun value has been clamped.

Reported-by: Team OWL337 
Signed-off-by: Thomas Gleixner 
Acked-by: John Stultz 
Cc: Peter Zijlstra 
Cc: Michael Kerrisk 
Link: https://lkml.kernel.org/r/20180626132705.018623573@linutronix.de
[florian: Make patch apply to v4.9.135]
Signed-off-by: Florian Fainelli 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Sasha Levin 
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

bpf: Prevent memory disambiguation attack

2018-12-17T20:55:15+00:00

commit af86ca4e3088fe5eacf2f7e58c01fa68ca067672 upstream.

Detect code patterns where malicious 'speculative store bypass' can be used
and sanitize such patterns.

 39: (bf) r3 = r10
 40: (07) r3 += -216
 41: (79) r8 = *(u64 *)(r7 +0)   // slow read
 42: (7a) *(u64 *)(r10 -72) = 0  // verifier inserts this instruction
 43: (7b) *(u64 *)(r8 +0) = r3   // this store becomes slow due to r8
 44: (79) r1 = *(u64 *)(r6 +0)   // cpu speculatively executes this load
 45: (71) r2 = *(u8 *)(r1 +0)    // speculatively arbitrary 'load byte'
                                 // is now sanitized

Above code after x86 JIT becomes:
 e5: mov    %rbp,%rdx
 e8: add    $0xffffffffffffff28,%rdx
 ef: mov    0x0(%r13),%r14
 f3: movq   $0x0,-0x48(%rbp)
 fb: mov    %rdx,0x0(%r14)
 ff: mov    0x0(%rbx),%rdi
103: movzbq 0x0(%rdi),%rsi

Signed-off-by: Alexei Starovoitov 
Signed-off-by: Thomas Gleixner 
[bwh: Backported to 4.4:
 - Add verifier_env parameter to check_stack_write()
 - Look up stack slot_types with state->stack_slot_type[] rather than
   state->stack[].slot_type[]
 - Drop bpf_verifier_env argument to verbose()
 - Adjust filename, context]
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

bpf/verifier: Pass instruction index to check_mem_access() and check_xadd()

2018-12-17T20:55:15+00:00

Extracted from commit 31fd85816dbe "bpf: permits narrower load from
bpf program context fields".

Cc: Daniel Borkmann 
Cc: Alexei Starovoitov 
Signed-off-by: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman