linux-stable.git/kernel, branch v4.4.146

audit: allow not equal op for audit by executable

2018-08-06T14:24:38+00:00

[ Upstream commit 23bcc480dac204c7dbdf49d96b2c918ed98223c2 ]

Current implementation of auditing by executable name only implements
the 'equal' operator. This patch extends it to also support the 'not
equal' operator.

See: https://github.com/linux-audit/audit-kernel/issues/53

Signed-off-by: Ondrej Mosnacek 
Reviewed-by: Richard Guy Briggs 
Signed-off-by: Paul Moore 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

bpf: fix references to free_bpf_prog_info() in comments

2018-08-06T14:24:37+00:00

[ Upstream commit ab7f5bf0928be2f148d000a6eaa6c0a36e74750e ]

Comments in the verifier refer to free_bpf_prog_info() which
seems to have never existed in tree.  Replace it with
free_used_maps().

Signed-off-by: Jakub Kicinski 
Reviewed-by: Quentin Monnet 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

tracing: Quiet gcc warning about maybe unused link variable

2018-08-06T14:24:30+00:00

commit 2519c1bbe38d7acacc9aacba303ca6f97482ed53 upstream.

Commit 57ea2a34adf4 ("tracing/kprobes: Fix trace_probe flags on
enable_trace_kprobe() failure") added an if statement that depends on another
if statement that gcc doesn't see will initialize the "link" variable and
gives the warning:

 "warning: 'link' may be used uninitialized in this function"

It is really a false positive, but to quiet the warning, and also to make
sure that it never actually is used uninitialized, initialize the "link"
variable to NULL and add an if (!WARN_ON_ONCE(!link)) where the compiler
thinks it could be used uninitialized.

Cc: stable@vger.kernel.org
Fixes: 57ea2a34adf4 ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure")
Reported-by: kbuild test robot 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure

2018-08-06T14:24:29+00:00

commit 57ea2a34adf40f3a6e88409aafcf803b8945619a upstream.

If enable_trace_kprobe fails to enable the probe in enable_k(ret)probe
it returns an error, but does not unset the tp flags it set previously.
This results in a probe being considered enabled and failures like being
unable to remove the probe through kprobe_events file since probes_open()
expects every probe to be disabled.

Link: http://lkml.kernel.org/r/20180725102826.8300-1-asavkov@redhat.com
Link: http://lkml.kernel.org/r/20180725142038.4765-1-asavkov@redhat.com

Cc: Ingo Molnar 
Cc: stable@vger.kernel.org
Fixes: 41a7dd420c57 ("tracing/kprobes: Support ftrace_event_file base multibuffer")
Acked-by: Masami Hiramatsu 
Reviewed-by: Josh Poimboeuf 
Signed-off-by: Artem Savkov 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

tracing: Fix possible double free in event_enable_trigger_func()

2018-08-06T14:24:29+00:00

commit 15cc78644d0075e76d59476a4467e7143860f660 upstream.

There was a case that triggered a double free in event_trigger_callback()
due to the called reg() function freeing the trigger_data and then it
getting freed again by the error return by the caller. The solution there
was to up the trigger_data ref count.

Code inspection found that event_enable_trigger_func() has the same issue,
but is not as easy to trigger (requires harder to trigger failures). It
needs to be solved slightly different as it needs more to clean up when the
reg() function fails.

Link: http://lkml.kernel.org/r/20180725124008.7008e586@gandalf.local.home

Cc: stable@vger.kernel.org
Fixes: 7862ad1846e99 ("tracing: Add 'enable_event' and 'disable_event' event trigger commands")
Reivewed-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

tracing: Fix double free of event_trigger_data

2018-08-06T14:24:29+00:00

commit 1863c387259b629e4ebfb255495f67cd06aa229b upstream.

Running the following:

 # cd /sys/kernel/debug/tracing
 # echo 500000 > buffer_size_kb
[ Or some other number that takes up most of memory ]
 # echo snapshot > events/sched/sched_switch/trigger

Triggers the following bug:

 ------------[ cut here ]------------
 kernel BUG at mm/slub.c:296!
 invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
 CPU: 6 PID: 6878 Comm: bash Not tainted 4.18.0-rc6-test+ #1066
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016
 RIP: 0010:kfree+0x16c/0x180
 Code: 05 41 0f b6 72 51 5b 5d 41 5c 4c 89 d7 e9 ac b3 f8 ff 48 89 d9 48 89 da 41 b8 01 00 00 00 5b 5d 41 5c 4c 89 d6 e9 f4 f3 ff ff <0f> 0b 0f 0b 48 8b 3d d9 d8 f9 00 e9 c1 fe ff ff 0f 1f 40 00 0f 1f
 RSP: 0018:ffffb654436d3d88 EFLAGS: 00010246
 RAX: ffff91a9d50f3d80 RBX: ffff91a9d50f3d80 RCX: ffff91a9d50f3d80
 RDX: 00000000000006a4 RSI: ffff91a9de5a60e0 RDI: ffff91a9d9803500
 RBP: ffffffff8d267c80 R08: 00000000000260e0 R09: ffffffff8c1a56be
 R10: fffff0d404543cc0 R11: 0000000000000389 R12: ffffffff8c1a56be
 R13: ffff91a9d9930e18 R14: ffff91a98c0c2890 R15: ffffffff8d267d00
 FS:  00007f363ea64700(0000) GS:ffff91a9de580000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000055c1cacc8e10 CR3: 00000000d9b46003 CR4: 00000000001606e0
 Call Trace:
  event_trigger_callback+0xee/0x1d0
  event_trigger_write+0xfc/0x1a0
  __vfs_write+0x33/0x190
  ? handle_mm_fault+0x115/0x230
  ? _cond_resched+0x16/0x40
  vfs_write+0xb0/0x190
  ksys_write+0x52/0xc0
  do_syscall_64+0x5a/0x160
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
 RIP: 0033:0x7f363e16ab50
 Code: 73 01 c3 48 8b 0d 38 83 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 79 db 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 1e e3 01 00 48 89 04 24
 RSP: 002b:00007fff9a4c6378 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f363e16ab50
 RDX: 0000000000000009 RSI: 000055c1cacc8e10 RDI: 0000000000000001
 RBP: 000055c1cacc8e10 R08: 00007f363e435740 R09: 00007f363ea64700
 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000009
 R13: 0000000000000001 R14: 00007f363e4345e0 R15: 00007f363e4303c0
 Modules linked in: ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device i915 snd_pcm snd_timer i2c_i801 snd soundcore i2c_algo_bit drm_kms_helper
86_pkg_temp_thermal video kvm_intel kvm irqbypass wmi e1000e
 ---[ end trace d301afa879ddfa25 ]---

The cause is because the register_snapshot_trigger() call failed to
allocate the snapshot buffer, and then called unregister_trigger()
which freed the data that was passed to it. Then on return to the
function that called register_snapshot_trigger(), as it sees it
failed to register, it frees the trigger_data again and causes
a double free.

By calling event_trigger_init() on the trigger_data (which only ups
the reference counter for it), and then event_trigger_free() afterward,
the trigger_data would not get freed by the registering trigger function
as it would only up and lower the ref count for it. If the register
trigger function fails, then the event_trigger_free() called after it
will free the trigger data normally.

Link: http://lkml.kernel.org/r/20180724191331.738eb819@gandalf.local.home

Cc: stable@vger.kerne.org
Fixes: 93e31ffbf417 ("tracing: Add 'snapshot' event trigger command")
Reported-by: Masami Hiramatsu 
Reviewed-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

seccomp: Move speculation migitation control to arch code

2018-07-25T08:18:27+00:00

commit 8bf37d8c067bb7eb8e7c381bdadf9bd89182b6bc upstream

The migitation control is simpler to implement in architecture code as it
avoids the extra function call to check the mode. Aside of that having an
explicit seccomp enabled mode in the architecture mitigations would require
even more workarounds.

Move it into architecture code and provide a weak function in the seccomp
code. Remove the 'which' argument as this allows the architecture to decide
which mitigations are relevant for seccomp.

Signed-off-by: Thomas Gleixner 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Srivatsa S. Bhat 
Reviewed-by: Matt Helsley (VMware) 
Reviewed-by: Alexey Makhalov 
Reviewed-by: Bo Gan 
Signed-off-by: Greg Kroah-Hartman

seccomp: Add filter flag to opt-out of SSB mitigation

2018-07-25T08:18:27+00:00

commit 00a02d0c502a06d15e07b857f8ff921e3e402675 upstream

If a seccomp user is not interested in Speculative Store Bypass mitigation
by default, it can set the new SECCOMP_FILTER_FLAG_SPEC_ALLOW flag when
adding filters.

Signed-off-by: Kees Cook 
Signed-off-by: Thomas Gleixner 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Srivatsa S. Bhat 
Reviewed-by: Matt Helsley (VMware) 
Reviewed-by: Alexey Makhalov 
Reviewed-by: Bo Gan 
Signed-off-by: Greg Kroah-Hartman

seccomp: Use PR_SPEC_FORCE_DISABLE

2018-07-25T08:18:27+00:00

commit b849a812f7eb92e96d1c8239b06581b2cfd8b275 upstream

Use PR_SPEC_FORCE_DISABLE in seccomp() because seccomp does not allow to
widen restrictions.

Signed-off-by: Thomas Gleixner 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Srivatsa S. Bhat 
Reviewed-by: Matt Helsley (VMware) 
Reviewed-by: Alexey Makhalov 
Reviewed-by: Bo Gan 
Signed-off-by: Greg Kroah-Hartman

seccomp: Enable speculation flaw mitigations

2018-07-25T08:18:27+00:00

commit 5c3070890d06ff82eecb808d02d2ca39169533ef upstream

When speculation flaw mitigations are opt-in (via prctl), using seccomp
will automatically opt-in to these protections, since using seccomp
indicates at least some level of sandboxing is desired.

Signed-off-by: Kees Cook 
Signed-off-by: Thomas Gleixner 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Srivatsa S. Bhat 
Reviewed-by: Matt Helsley (VMware) 
Reviewed-by: Alexey Makhalov 
Reviewed-by: Bo Gan 
Signed-off-by: Greg Kroah-Hartman