linux-stable.git/kernel, branch v4.19.237

cpuset: Fix unsafe lock order between cpuset lock and cpuslock

2022-03-23T08:10:41+00:00

The backport commit 4eec5fe1c680a ("cgroup/cpuset: Fix a race
between cpuset_attach() and cpu hotplug") looks suspicious since
it comes before commit d74b27d63a8b ("cgroup/cpuset: Change
cpuset_rwsem and hotplug lock order") v5.4-rc1~176^2~30 when
the locking order was: cpuset lock, cpus lock.

Fix it with the correct locking order and reduce the cpus locking
range because only set_cpus_allowed_ptr() needs the protection of
cpus lock.

Fixes: 4eec5fe1c680a ("cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug")
Reported-by: Michal Koutný 
Signed-off-by: Zhang Qiao 
Signed-off-by: Greg Kroah-Hartman

sched/topology: Fix sched_domain_topology_level alloc in sched_init_numa()

2022-03-23T08:10:41+00:00

commit 71e5f6644fb2f3304fcb310145ded234a37e7cc1 upstream.

Commit "sched/topology: Make sched_init_numa() use a set for the
deduplicating sort" allocates 'i + nr_levels (level)' instead of
'i + nr_levels + 1' sched_domain_topology_level.

This led to an Oops (on Arm64 juno with CONFIG_SCHED_DEBUG):

sched_init_domains
  build_sched_domains()
    __free_domain_allocs()
      __sdt_free() {
	...
        for_each_sd_topology(tl)
	  ...
          sd = *per_cpu_ptr(sdd->sd, j); <--
	  ...
      }

Signed-off-by: Dietmar Eggemann 
Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Ingo Molnar 
Tested-by: Vincent Guittot 
Tested-by: Barry Song 
Link: https://lkml.kernel.org/r/6000e39e-7d28-c360-9cd6-8798fd22a9bf@arm.com
Signed-off-by: dann frazier 
Signed-off-by: Greg Kroah-Hartman

sched/topology: Make sched_init_numa() use a set for the deduplicating sort

2022-03-23T08:10:41+00:00

commit 620a6dc40754dc218f5b6389b5d335e9a107fd29 upstream.

The deduplicating sort in sched_init_numa() assumes that the first line in
the distance table contains all unique values in the entire table. I've
been trying to pen what this exactly means for the topology, but it's not
straightforward. For instance, topology.c uses this example:

  node   0   1   2   3
    0:  10  20  20  30
    1:  20  10  20  20
    2:  20  20  10  20
    3:  30  20  20  10

  0 ----- 1
  |     / |
  |   /   |
  | /     |
  2 ----- 3

Which works out just fine. However, if we swap nodes 0 and 1:

  1 ----- 0
  |     / |
  |   /   |
  | /     |
  2 ----- 3

we get this distance table:

  node   0  1  2  3
    0:  10 20 20 20
    1:  20 10 20 30
    2:  20 20 10 20
    3:  20 30 20 10

Which breaks the deduplicating sort (non-representative first line). In
this case this would just be a renumbering exercise, but it so happens that
we can have a deduplicating sort that goes through the whole table in O(n²)
at the extra cost of a temporary memory allocation (i.e. any form of set).

The ACPI spec (SLIT) mentions distances are encoded on 8 bits. Following
this, implement the set as a 256-bits bitmap. Should this not be
satisfactory (i.e. we want to support 32-bit values), then we'll have to go
for some other sparse set implementation.

This has the added benefit of letting us allocate just the right amount of
memory for sched_domains_numa_distance[], rather than an arbitrary
(nr_node_ids + 1).

Note: DT binding equivalent (distance-map) decodes distances as 32-bit
values.

Signed-off-by: Valentin Schneider 
Signed-off-by: Peter Zijlstra (Intel) 
Link: https://lkml.kernel.org/r/20210122123943.1217-2-valentin.schneider@arm.com
Signed-off-by: dann frazier 
Signed-off-by: Greg Kroah-Hartman

tracing: Ensure trace buffer is at least 4096 bytes large

2022-03-16T12:20:27+00:00

[ Upstream commit 7acf3a127bb7c65ff39099afd78960e77b2ca5de ]

Booting the kernel with 'trace_buf_size=1' give a warning at
boot during the ftrace selftests:

[    0.892809] Running postponed tracer tests:
[    0.892893] Testing tracer function:
[    0.901899] Callback from call_rcu_tasks_trace() invoked.
[    0.983829] Callback from call_rcu_tasks_rude() invoked.
[    1.072003] .. bad ring buffer .. corrupted trace buffer ..
[    1.091944] Callback from call_rcu_tasks() invoked.
[    1.097695] PASSED
[    1.097701] Testing dynamic ftrace: .. filter failed count=0 ..FAILED!
[    1.353474] ------------[ cut here ]------------
[    1.353478] WARNING: CPU: 0 PID: 1 at kernel/trace/trace.c:1951 run_tracer_selftest+0x13c/0x1b0

Therefore enforce a minimum of 4096 bytes to make the selftest pass.

Link: https://lkml.kernel.org/r/20220214134456.1751749-1-svens@linux.ibm.com

Signed-off-by: Sven Schnelle 
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Sasha Levin

x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting

2022-03-11T09:15:11+00:00

commit 44a3918c8245ab10c6c9719dd12e7a8d291980d8 upstream.

With unprivileged eBPF enabled, eIBRS (without retpoline) is vulnerable
to Spectre v2 BHB-based attacks.

When both are enabled, print a warning message and report it in the
'spectre_v2' sysfs vulnerabilities file.

Signed-off-by: Josh Poimboeuf 
Signed-off-by: Borislav Petkov 
Reviewed-by: Thomas Gleixner 
[fllinden@amazon.com: backported to 4.19]
Signed-off-by: Frank van der Linden 
Signed-off-by: Greg Kroah-Hartman

tracing/histogram: Fix sorting on old "cpu" value

2022-03-08T18:04:10+00:00

commit 1d1898f65616c4601208963c3376c1d828cbf2c7 upstream.

When trying to add a histogram against an event with the "cpu" field, it
was impossible due to "cpu" being a keyword to key off of the running CPU.
So to fix this, it was changed to "common_cpu" to match the other generic
fields (like "common_pid"). But since some scripts used "cpu" for keying
off of the CPU (for events that did not have "cpu" as a field, which is
most of them), a backward compatibility trick was added such that if "cpu"
was used as a key, and the event did not have "cpu" as a field name, then
it would fallback and switch over to "common_cpu".

This fix has a couple of subtle bugs. One was that when switching over to
"common_cpu", it did not change the field name, it just set a flag. But
the code still found a "cpu" field. The "cpu" field is used for filtering
and is returned when the event does not have a "cpu" field.

This was found by:

  # cd /sys/kernel/tracing
  # echo hist:key=cpu,pid:sort=cpu > events/sched/sched_wakeup/trigger
  # cat events/sched/sched_wakeup/hist

Which showed the histogram unsorted:

{ cpu:         19, pid:       1175 } hitcount:          1
{ cpu:          6, pid:        239 } hitcount:          2
{ cpu:         23, pid:       1186 } hitcount:         14
{ cpu:         12, pid:        249 } hitcount:          2
{ cpu:          3, pid:        994 } hitcount:          5

Instead of hard coding the "cpu" checks, take advantage of the fact that
trace_event_field_field() returns a special field for "cpu" and "CPU" if
the event does not have "cpu" as a field. This special field has the
"filter_type" of "FILTER_CPU". Check that to test if the returned field is
of the CPU type instead of doing the string compare.

Also, fix the sorting bug by testing for the hist_field flag of
HIST_FIELD_FL_CPU when setting up the sort routine. Otherwise it will use
the special CPU field to know what compare routine to use, and since that
special field does not have a size, it returns tracing_map_cmp_none.

Cc: stable@vger.kernel.org
Fixes: 1e3bac71c505 ("tracing/histogram: Rename "cpu" to "common_cpu"")
Reported-by: Daniel Bristot de Oliveira 
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Greg Kroah-Hartman

tracing: Have traceon and traceoff trigger honor the instance

2022-03-02T10:38:15+00:00

commit 302e9edd54985f584cfc180098f3554774126969 upstream.

If a trigger is set on an event to disable or enable tracing within an
instance, then tracing should be disabled or enabled in the instance and
not at the top level, which is confusing to users.

Link: https://lkml.kernel.org/r/20220223223837.14f94ec3@rorschach.local.home

Cc: stable@vger.kernel.org
Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables")
Tested-by: Daniel Bristot de Oliveira 
Reviewed-by: Tom Zanussi 
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Greg Kroah-Hartman

cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug

2022-03-02T10:38:09+00:00

commit 05c7b7a92cc87ff8d7fde189d0fade250697573c upstream.

As previously discussed(https://lkml.org/lkml/2022/1/20/51),
cpuset_attach() is affected with similar cpu hotplug race,
as follow scenario:

     cpuset_attach()				cpu hotplug
    ---------------------------            ----------------------
    down_write(cpuset_rwsem)
    guarantee_online_cpus() // (load cpus_attach)
					sched_cpu_deactivate
					  set_cpu_active()
					  // will change cpu_active_mask
    set_cpus_allowed_ptr(cpus_attach)
      __set_cpus_allowed_ptr_locked()
       // (if the intersection of cpus_attach and
         cpu_active_mask is empty, will return -EINVAL)
    up_write(cpuset_rwsem)

To avoid races such as described above, protect cpuset_attach() call
with cpu_hotplug_lock.

Fixes: be367d099270 ("cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time")
Cc: stable@vger.kernel.org # v2.6.32+
Reported-by: Zhao Gongyi 
Signed-off-by: Zhang Qiao 
Acked-by: Waiman Long 
Reviewed-by: Michal Koutný 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

tracing: Fix tp_printk option related with tp_printk_stop_on_boot

2022-02-23T10:58:42+00:00

[ Upstream commit 3203ce39ac0b2a57a84382ec184c7d4a0bede175 ]

The kernel parameter "tp_printk_stop_on_boot" starts with "tp_printk" which is
the same as another kernel parameter "tp_printk". If "tp_printk" setup is
called before the "tp_printk_stop_on_boot", it will override the latter
and keep it from being set.

This is similar to other kernel parameter issues, such as:
  Commit 745a600cf1a6 ("um: console: Ignore console= option")
or init/do_mounts.c:45 (setup function of "ro" kernel param)

Fix it by checking for a "_" right after the "tp_printk" and if that
exists do not process the parameter.

Link: https://lkml.kernel.org/r/20220208195421.969326-1-jsyoo5b@gmail.com

Signed-off-by: JaeSang Yoo 
[ Fixed up change log and added space after if condition ]
Signed-off-by: Steven Rostedt (Google) 
Signed-off-by: Sasha Levin

taskstats: Cleanup the use of task->exit_code

2022-02-23T10:58:39+00:00

commit 1b5a42d9c85f0e731f01c8d1129001fd8531a8a0 upstream.

In the function bacct_add_task the code reading task->exit_code was
introduced in commit f3cef7a99469 ("[PATCH] csa: basic accounting over
taskstats"), and it is not entirely clear what the taskstats interface
is trying to return as only returning the exit_code of the first task
in a process doesn't make a lot of sense.

As best as I can figure the intent is to return task->exit_code after
a task exits.  The field is returned with per task fields, so the
exit_code of the entire process is not wanted.  Only the value of the
first task is returned so this is not a useful way to get the per task
ptrace stop code.  The ordinary case of returning this value is
returning after a task exits, which also precludes use for getting
a ptrace value.

It is common to for the first task of a process to also be the last
task of a process so this field may have done something reasonable by
accident in testing.

Make ac_exitcode a reliable per task value by always returning it for
every exited task.

Setting ac_exitcode in a sensible mannter makes it possible to continue
to provide this value going forward.

Cc: Balbir Singh 
Fixes: f3cef7a99469 ("[PATCH] csa: basic accounting over taskstats")
Link: https://lkml.kernel.org/r/20220103213312.9144-5-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" 
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee 
Signed-off-by: Greg Kroah-Hartman