linux-stable.git/kernel, branch v4.14.60

audit: allow not equal op for audit by executable

2018-08-03T05:50:39+00:00

[ Upstream commit 23bcc480dac204c7dbdf49d96b2c918ed98223c2 ]

Current implementation of auditing by executable name only implements
the 'equal' operator. This patch extends it to also support the 'not
equal' operator.

See: https://github.com/linux-audit/audit-kernel/issues/53

Signed-off-by: Ondrej Mosnacek 
Reviewed-by: Richard Guy Briggs 
Signed-off-by: Paul Moore 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

delayacct: Use raw_spinlocks

2018-08-03T05:50:38+00:00

[ Upstream commit 02acc80d19edb0d5684c997b2004ad19f9f5236e ]

try_to_wake_up() might invoke delayacct_blkio_end() while holding the
pi_lock (which is a raw_spinlock_t). delayacct_blkio_end() acquires
task_delay_info.lock which is a spinlock_t. This causes a might sleep splat
on -RT where non raw spinlocks are converted to 'sleeping' spinlocks.

task_delay_info.lock is only held for a short amount of time so it's not a
problem latency wise to make convert it to a raw spinlock.

Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Thomas Gleixner 
Cc: Balbir Singh 
Link: https://lkml.kernel.org/r/20180423161024.6710-1-bigeasy@linutronix.de
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

stop_machine: Use raw spinlocks

2018-08-03T05:50:38+00:00

[ Upstream commit de5b55c1d4e30740009864eb35ce4ed856aac01d ]

Use raw-locks in stop_machine() to allow locking in irq-off and
preempt-disabled regions on -RT. This also documents the possible locking
context in general.

[bigeasy: update patch description.]
Signed-off-by: Thomas Gleixner 
Signed-off-by: Sebastian Andrzej Siewior 
Link: https://lkml.kernel.org/r/20180423191635.6014-1-bigeasy@linutronix.de
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

bpf: fix references to free_bpf_prog_info() in comments

2018-08-03T05:50:37+00:00

[ Upstream commit ab7f5bf0928be2f148d000a6eaa6c0a36e74750e ]

Comments in the verifier refer to free_bpf_prog_info() which
seems to have never existed in tree.  Replace it with
free_used_maps().

Signed-off-by: Jakub Kicinski 
Reviewed-by: Quentin Monnet 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

PM / wakeup: Make s2idle_lock a RAW_SPINLOCK

2018-08-03T05:50:29+00:00

[ Upstream commit 62fc00a6611a0014c85763f9def1fc07c15d1302 ]

The `s2idle_lock' is acquired during suspend while interrupts are
disabled even on RT. The lock is acquired for short sections only.
Make it a RAW lock which avoids "sleeping while atomic" warnings on RT.

Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

printk: drop in_nmi check from printk_safe_flush_on_panic()

2018-08-03T05:50:24+00:00

[ Upstream commit 554755be08fba31c74f66b82a485e5513205af84 ]

Drop the in_nmi() check from printk_safe_flush_on_panic()
and attempt to re-init (IOW unlock) locked logbuf spinlock
from panic CPU regardless of its context.

Otherwise, theoretically, we can deadlock on logbuf trying to flush
per-CPU buffers:

  a) Panic CPU is running in non-NMI context
  b) Panic CPU sends out shutdown IPI via reboot vector
  c) Panic CPU fails to stop all remote CPUs
  d) Panic CPU sends out shutdown IPI via NMI vector
     One of the CPUs that we bring down via NMI vector can hold
     logbuf spin lock (theoretically).

Link: http://lkml.kernel.org/r/20180530070350.10131-1-sergey.senozhatsky@gmail.com
To: Steven Rostedt 
Cc: Peter Zijlstra 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sergey Senozhatsky 
Signed-off-by: Petr Mladek 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

kernel/hung_task.c: show all hung tasks before panic

2018-08-03T05:50:23+00:00

[ Upstream commit 401c636a0eeb0d51862fce222da1bf08e3a0ffd0 ]

When we get a hung task it can often be valuable to see _all_ the hung
tasks on the system before calling panic().

Quoting from https://syzkaller.appspot.com/text?tag=CrashReport&id=5316056503549952
----------------------------------------
INFO: task syz-executor0:6540 blocked for more than 120 seconds.
      Not tainted 4.16.0+ #13
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
syz-executor0   D23560  6540   4521 0x80000004
Call Trace:
 context_switch kernel/sched/core.c:2848 [inline]
 __schedule+0x8fb/0x1ef0 kernel/sched/core.c:3490
 schedule+0xf5/0x430 kernel/sched/core.c:3549
 schedule_preempt_disabled+0x10/0x20 kernel/sched/core.c:3607
 __mutex_lock_common kernel/locking/mutex.c:833 [inline]
 __mutex_lock+0xb7f/0x1810 kernel/locking/mutex.c:893
 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908
 lo_ioctl+0x8b/0x1b70 drivers/block/loop.c:1355
 __blkdev_driver_ioctl block/ioctl.c:303 [inline]
 blkdev_ioctl+0x1759/0x1e00 block/ioctl.c:601
 ioctl_by_bdev+0xa5/0x110 fs/block_dev.c:2060
 isofs_get_last_session fs/isofs/inode.c:567 [inline]
 isofs_fill_super+0x2ba9/0x3bc0 fs/isofs/inode.c:660
 mount_bdev+0x2b7/0x370 fs/super.c:1119
 isofs_mount+0x34/0x40 fs/isofs/inode.c:1560
 mount_fs+0x66/0x2d0 fs/super.c:1222
 vfs_kern_mount.part.26+0xc6/0x4a0 fs/namespace.c:1037
 vfs_kern_mount fs/namespace.c:2514 [inline]
 do_new_mount fs/namespace.c:2517 [inline]
 do_mount+0xea4/0x2b90 fs/namespace.c:2847
 ksys_mount+0xab/0x120 fs/namespace.c:3063
 SYSC_mount fs/namespace.c:3077 [inline]
 SyS_mount+0x39/0x50 fs/namespace.c:3074
 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7
(...snipped...)
Showing all locks held in the system:
(...snipped...)
2 locks held by syz-executor0/6540:
 #0: 00000000566d4c39 (&type->s_umount_key#49/1){+.+.}, at: alloc_super fs/super.c:211 [inline]
 #0: 00000000566d4c39 (&type->s_umount_key#49/1){+.+.}, at: sget_userns+0x3b2/0xe60 fs/super.c:502 /* down_write_nested(&s->s_umount, SINGLE_DEPTH_NESTING); */
 #1: 0000000043ca8836 (&lo->lo_ctl_mutex/1){+.+.}, at: lo_ioctl+0x8b/0x1b70 drivers/block/loop.c:1355 /* mutex_lock_nested(&lo->lo_ctl_mutex, 1); */
(...snipped...)
3 locks held by syz-executor7/6541:
 #0: 0000000043ca8836 (&lo->lo_ctl_mutex/1){+.+.}, at: lo_ioctl+0x8b/0x1b70 drivers/block/loop.c:1355 /* mutex_lock_nested(&lo->lo_ctl_mutex, 1); */
 #1: 000000007bf3d3f9 (&bdev->bd_mutex){+.+.}, at: blkdev_reread_part+0x1e/0x40 block/ioctl.c:192
 #2: 00000000566d4c39 (&type->s_umount_key#50){.+.+}, at: __get_super.part.10+0x1d3/0x280 fs/super.c:663 /* down_read(&sb->s_umount); */
----------------------------------------

When reporting an AB-BA deadlock like shown above, it would be nice if
trace of PID=6541 is printed as well as trace of PID=6540 before calling
panic().

Showing hung tasks up to /proc/sys/kernel/hung_task_warnings could delay
calling panic() but normally there should not be so many hung tasks.

Link: http://lkml.kernel.org/r/201804050705.BHE57833.HVFOFtSOMQJFOL@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa 
Acked-by: Paul E. McKenney 
Acked-by: Dmitry Vyukov 
Cc: Vegard Nossum 
Cc: Mandeep Singh Baines 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 

Signed-off-by: Linus Torvalds 

Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

kcov: ensure irq code sees a valid area

2018-08-03T05:50:22+00:00

[ Upstream commit c9484b986ef03492357fddd50afbdd02929cfa72 ]

Patch series "kcov: fix unexpected faults".

These patches fix a few issues where KCOV code could trigger recursive
faults, discovered while debugging a patch enabling KCOV for arch/arm:

* On CONFIG_PREEMPT kernels, there's a small race window where
  __sanitizer_cov_trace_pc() can see a bogus kcov_area.

* Lazy faulting of the vmalloc area can cause mutual recursion between
  fault handling code and __sanitizer_cov_trace_pc().

* During the context switch, switching the mm can cause the kcov_area to
  be transiently unmapped.

These are prerequisites for enabling KCOV on arm, but the issues
themsevles are generic -- we just happen to avoid them by chance rather
than design on x86-64 and arm64.

This patch (of 3):

For kernels built with CONFIG_PREEMPT, some C code may execute before or
after the interrupt handler, while the hardirq count is zero.  In these
cases, in_task() can return true.

A task can be interrupted in the middle of a KCOV_DISABLE ioctl while it
resets the task's kcov data via kcov_task_init().  Instrumented code
executed during this period will call __sanitizer_cov_trace_pc(), and as
in_task() returns true, will inspect t->kcov_mode before trying to write
to t->kcov_area.

In kcov_init_task() we update t->kcov_{mode,area,size} with plain stores,
which may be re-ordered, torn, etc.  Thus __sanitizer_cov_trace_pc() may
see bogus values for any of these fields, and may attempt to write to
memory which is not mapped.

Let's avoid this by using WRITE_ONCE() to set t->kcov_mode, with a
barrier() to ensure this is ordered before we clear t->kov_{area,size}.
This ensures that any code execute while kcov_init_task() is preempted
will either see valid values for t->kcov_{area,size}, or will see that
t->kcov_mode is KCOV_MODE_DISABLED, and bail out without touching
t->kcov_area.

Link: http://lkml.kernel.org/r/20180504135535.53744-2-mark.rutland@arm.com
Signed-off-by: Mark Rutland 
Acked-by: Andrey Ryabinin 
Cc: Dmitry Vyukov 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

tracing: Quiet gcc warning about maybe unused link variable

2018-08-03T05:50:21+00:00

commit 2519c1bbe38d7acacc9aacba303ca6f97482ed53 upstream.

Commit 57ea2a34adf4 ("tracing/kprobes: Fix trace_probe flags on
enable_trace_kprobe() failure") added an if statement that depends on another
if statement that gcc doesn't see will initialize the "link" variable and
gives the warning:

 "warning: 'link' may be used uninitialized in this function"

It is really a false positive, but to quiet the warning, and also to make
sure that it never actually is used uninitialized, initialize the "link"
variable to NULL and add an if (!WARN_ON_ONCE(!link)) where the compiler
thinks it could be used uninitialized.

Cc: stable@vger.kernel.org
Fixes: 57ea2a34adf4 ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure")
Reported-by: kbuild test robot 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure

2018-08-03T05:50:21+00:00

commit 57ea2a34adf40f3a6e88409aafcf803b8945619a upstream.

If enable_trace_kprobe fails to enable the probe in enable_k(ret)probe
it returns an error, but does not unset the tp flags it set previously.
This results in a probe being considered enabled and failures like being
unable to remove the probe through kprobe_events file since probes_open()
expects every probe to be disabled.

Link: http://lkml.kernel.org/r/20180725102826.8300-1-asavkov@redhat.com
Link: http://lkml.kernel.org/r/20180725142038.4765-1-asavkov@redhat.com

Cc: Ingo Molnar 
Cc: stable@vger.kernel.org
Fixes: 41a7dd420c57 ("tracing/kprobes: Support ftrace_event_file base multibuffer")
Acked-by: Masami Hiramatsu 
Reviewed-by: Josh Poimboeuf 
Signed-off-by: Artem Savkov 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman