linux-stable.git/kernel, branch v4.1.7

genirq: Introduce irq_chip_set_type_parent() helper

2015-09-13T16:07:51+00:00

commit b7560de198222994374c1340a389f12d5efb244a upstream.

This helper is required for irq chips which do not implement a
irq_set_type callback and need to call down the irq domain hierarchy
for the actual trigger type change.

This helper is required to fix further wreckage caused by the
conversion of TI OMAP to hierarchical irq domains and therefor tagged
for stable.

[ tglx: Massaged changelog ]

Signed-off-by: Grygorii Strashko 
Cc: Sudeep Holla 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-3-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchy

2015-09-13T16:07:51+00:00

commit 6d4affea7d5aa5ca5ff4c3e5fbf3ee16801cc527 upstream.

irq_chip_retrigger_hierarchy() returns -ENOSYS if it was not able to
find at least one .irq_retrigger() callback implemented in the IRQ
domain hierarchy.

That's wrong, because check_irq_resend() expects a 0 return value from
the callback in case that the hardware assisted resend was not
possible. If the return value is non zero the core code assumes
hardware resend success and the software resend is not invoked.

This results in lost interrupts on platforms where none of the parent
irq chips in the hierarchy implements the retrigger callback.

This is observable on TI OMAP, where the hierarchy is:

 ARM GIC <- OMAP wakeupgen <- TI Crossbar

Return 0 instead so the software resend mechanism gets invoked.

[ tglx: Massaged changelog ]

Fixes: 85f08c17de26 ('genirq: Introduce helper functions...')
Signed-off-by: Grygorii Strashko 
Reviewed-by: Marc Zyngier 
Reviewed-by: Jiang Liu 
Cc: Sudeep Holla 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Cc: 
Link: http://lkml.kernel.org/r/1439554830-19502-2-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

cpuset: use trialcs->mems_allowed as a temp variable

2015-09-13T16:07:46+00:00

commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 upstream.

The comment says it's using trialcs->mems_allowed as a temp variable but
it didn't match the code. Change the code to match the comment.

This fixes an issue when writing in cpuset.mems when a sub-directory
exists: we need to write several times for the information to persist:

| root@alban:/sys/fs/cgroup/cpuset# mkdir footest9
| root@alban:/sys/fs/cgroup/cpuset# cd footest9
| root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa
| root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems
|
| root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems
| root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems
|
| root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems
| root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems
| 0
| root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems
|
| root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems
| root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems
| 0
| root@alban:/sys/fs/cgroup/cpuset/footest9#

This should help to fix the following issue in Docker:
https://github.com/opencontainers/runc/issues/133
In some conditions, a Docker container needs to be started twice in
order to work.

Signed-off-by: Alban Crequy 
Tested-by: Iago López Galeiras 
Acked-by: Li Zefan 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

perf: Fix PERF_EVENT_IOC_PERIOD migration race

2015-09-13T16:07:39+00:00

commit c7999c6f3fed9e383d3131474588f282ae6d56b9 upstream.

I ran the perf fuzzer, which triggered some WARN()s which are due to
trying to stop/restart an event on the wrong CPU.

Use the normal IPI pattern to ensure we run the code on the correct CPU.

Signed-off-by: Peter Zijlstra (Intel) 
Cc: Vince Weaver 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Fixes: bad7192b842c ("perf: Fix PERF_EVENT_IOC_PERIOD to force-reset the period")
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

perf: Fix double-free of the AUX buffer

2015-09-13T16:07:39+00:00

commit ee9397a6fb9bc4e52677f5e33eed4abee0f515e6 upstream.

If rb->aux_refcount is decremented to zero before rb->refcount,
__rb_free_aux() may be called twice resulting in a double free of
rb->aux_pages.  Fix this by adding a check to __rb_free_aux().

Signed-off-by: Ben Hutchings 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Alexander Shishkin 
Cc: Arnaldo Carvalho de Melo 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Fixes: 57ffc5ca679f ("perf: Fix AUX buffer refcounting")
Link: http://lkml.kernel.org/r/1437953468.12842.17.camel@decadent.org.uk
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

perf: Fix running time accounting

2015-09-13T16:07:39+00:00

commit 00a2916f7f82c348a2a94dbb572874173bc308a3 upstream.

A recent fix to the shadow timestamp inadvertly broke the running time
accounting.

We must not update the running timestamp if we fail to schedule the
event, the event will not have ran. This can (and did) result in
negative total runtime because the stopped timestamp was before the
running timestamp (we 'started' but never stopped the event -- because
it never really started we didn't have to stop it either).

Reported-and-Tested-by: Vince Weaver 
Fixes: 72f669c0086f ("perf: Update shadow timestamp before add event")
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Shaohua Li 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

perf: Fix fasync handling on inherited events

2015-09-13T16:07:39+00:00

commit fed66e2cdd4f127a43fd11b8d92a99bdd429528c upstream.

Vince reported that the fasync signal stuff doesn't work proper for
inherited events. So fix that.

Installing fasync allocates memory and sets filp->f_flags |= FASYNC,
which upon the demise of the file descriptor ensures the allocation is
freed and state is updated.

Now for perf, we can have the events stick around for a while after the
original FD is dead because of references from child events. So we
cannot copy the fasync pointer around. We can however consistently use
the parent's fasync, as that will be updated.

Reported-and-Tested-by: Vince Weaver 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Arnaldo Carvalho deMelo 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1434011521.1495.71.camel@twins
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

signal: fix information leak in copy_siginfo_from_user32

2015-08-17T03:52:26+00:00

commit 3c00cb5e68dc719f2fc73a33b1b230aadfcb1309 upstream.

This function can leak kernel stack data when the user siginfo_t has a
positive si_code value.  The top 16 bits of si_code descibe which fields
in the siginfo_t union are active, but they are treated inconsistently
between copy_siginfo_from_user32, copy_siginfo_to_user32 and
copy_siginfo_to_user.

copy_siginfo_from_user32 is called from rt_sigqueueinfo and
rt_tgsigqueueinfo in which the user has full control overthe top 16 bits
of si_code.

This fixes the following information leaks:
x86:   8 bytes leaked when sending a signal from a 32-bit process to
       itself. This leak grows to 16 bytes if the process uses x32.
       (si_code = __SI_CHLD)
x86:   100 bytes leaked when sending a signal from a 32-bit process to
       a 64-bit process. (si_code = -1)
sparc: 4 bytes leaked when sending a signal from a 32-bit process to a
       64-bit process. (si_code = any)

parsic and s390 have similar bugs, but they are not vulnerable because
rt_[tg]sigqueueinfo have checks that prevent sending a positive si_code
to a different process.  These bugs are also fixed for consistency.

Signed-off-by: Amanieu d'Antras 
Cc: Oleg Nesterov 
Cc: Ingo Molnar 
Cc: Russell King 
Cc: Ralf Baechle 
Cc: Benjamin Herrenschmidt 
Cc: Chris Metcalf 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

signal: fix information leak in copy_siginfo_to_user

2015-08-17T03:52:26+00:00

commit 26135022f85105ad725cda103fa069e29e83bd16 upstream.

This function may copy the si_addr_lsb, si_lower and si_upper fields to
user mode when they haven't been initialized, which can leak kernel
stack data to user mode.

Just checking the value of si_code is insufficient because the same
si_code value is shared between multiple signals.  This is solved by
checking the value of si_signo in addition to si_code.

Signed-off-by: Amanieu d'Antras 
Cc: Oleg Nesterov 
Cc: Ingo Molnar 
Cc: Russell King 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

ftrace: Fix breakage of set_ftrace_pid

2015-08-10T19:21:55+00:00

commit e3eea1404f5ff7a2ceb7b5e7ba412a6fd94f2935 upstream.

Commit 4104d326b670 ("ftrace: Remove global function list and call function
directly") simplified the ftrace code by removing the global_ops list with a
new design. But this cleanup also broke the filtering of PIDs that are added
to the set_ftrace_pid file.

Add back the proper hooks to have pid filtering working once again.

Reported-by: Matt Fleming 
Reported-by: Richard Weinberger 
Tested-by: Matt Fleming 
Signed-off-by: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman