linux-stable.git/kernel, branch v3.8.5

clockevents: Don't allow dummy broadcast timers

2013-03-28T19:18:01+00:00

commit a7dc19b8652c862d5b7c4d2339bd3c428bd29c4a upstream.

Currently tick_check_broadcast_device doesn't reject clock_event_devices
with CLOCK_EVT_FEAT_DUMMY, and may select them in preference to real
hardware if they have a higher rating value. In this situation, the
dummy timer is responsible for broadcasting to itself, and the core
clockevents code may attempt to call non-existent callbacks for
programming the dummy, eventually leading to a panic.

This patch makes tick_check_broadcast_device always reject dummy timers,
preventing this problem.

Signed-off-by: Mark Rutland 
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jon Medhurst (Tixy) 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

tracing: Keep overwrite in sync between regular and snapshot buffers

2013-03-28T19:17:46+00:00

commit 80902822658aab18330569587cdb69ac1dfdcea8 upstream.

Changing the overwrite mode for the ring buffer via the trace
option only sets the normal buffer. But the snapshot buffer could
swap with it, and then the snapshot would be in non overwrite mode
and the normal buffer would be in overwrite mode, even though the
option flag states otherwise.

Keep the two buffers overwrite modes in sync.

Signed-off-by: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman

tracing: Protect tracer flags with trace_types_lock

2013-03-28T19:17:46+00:00

commit 69d34da2984c95b33ea21518227e1f9470f11d95 upstream.

Seems that the tracer flags have never been protected from
synchronous writes. Luckily, admins don't usually modify the
tracing flags via two different tasks. But if scripts were to
be used to modify them, then they could get corrupted.

Move the trace_types_lock that protects against tracers changing
to also protect the flags being set.

Signed-off-by: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman

tracing: Fix free of probe entry by calling call_rcu_sched()

2013-03-28T19:17:45+00:00

commit 740466bc89ad8bd5afcc8de220f715f62b21e365 upstream.

Because function tracing is very invasive, and can even trace
calls to rcu_read_lock(), RCU access in function tracing is done
with preempt_disable_notrace(). This requires a synchronize_sched()
for updates and not a synchronize_rcu().

Function probes (traceon, traceoff, etc) must be freed after
a synchronize_sched() after its entry has been removed from the
hash. But call_rcu() is used. Fix this by using call_rcu_sched().

Also fix the usage to use hlist_del_rcu() instead of hlist_del().

Signed-off-by: Steven Rostedt 
Cc: Paul McKenney 
Signed-off-by: Greg Kroah-Hartman

tracing: Fix race in snapshot swapping

2013-03-28T19:17:45+00:00

commit 2721e72dd10f71a3ba90f59781becf02638aa0d9 upstream.

Although the swap is wrapped with a spin_lock, the assignment
of the temp buffer used to swap is not within that lock.
It needs to be moved into that lock, otherwise two swaps
happening on two different CPUs, can end up using the wrong
temp buffer to assign in the swap.

Luckily, all current callers of the swap function appear to have
their own locks. But in case something is added that allows two
different callers to call the swap, then there's a chance that
this race can trigger and corrupt the buffers.

New code is coming soon that will allow for this race to trigger.

I've Cc'd stable, so this bug will not show up if someone backports
one of the changes that can trigger this bug.

Signed-off-by: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman

signal: always clear sa_restorer on execve

2013-03-20T20:10:53+00:00

commit 2ca39528c01a933f6689cd6505ce65bd6d68a530 upstream.

When the new signal handlers are set up, the location of sa_restorer is
not cleared, leaking a parent process's address space location to
children.  This allows for a potential bypass of the parent's ASLR by
examining the sa_restorer value returned when calling sigaction().

Based on what should be considered "secret" about addresses, it only
matters across the exec not the fork (since the VMAs haven't changed
until the exec).  But since exec sets SIG_DFL and keeps sa_restorer,
this is where it should be fixed.

Given the few uses of sa_restorer, a "set" function was not written
since this would be the only use.  Instead, we use
__ARCH_HAS_SA_RESTORER, as already done in other places.

Example of the leak before applying this patch:

  $ cat /proc/$$/maps
  ...
  7fb9f3083000-7fb9f3238000 r-xp 00000000 fd:01 404469 .../libc-2.15.so
  ...
  $ ./leak
  ...
  7f278bc74000-7f278be29000 r-xp 00000000 fd:01 404469 .../libc-2.15.so
  ...
  1 0 (nil) 0x7fb9f30b94a0
  2 4000000 (nil) 0x7f278bcaa4a0
  3 4000000 (nil) 0x7f278bcaa4a0
  4 0 (nil) 0x7fb9f30b94a0
  ...

[akpm@linux-foundation.org: use SA_RESTORER for backportability]
Signed-off-by: Kees Cook 
Reported-by: Emese Revfy 
Cc: Emese Revfy 
Cc: PaX Team 
Cc: Al Viro 
Cc: Oleg Nesterov 
Cc: "Eric W. Biederman" 
Cc: Serge Hallyn 
Cc: Julien Tinnes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

userns: Don't allow CLONE_NEWUSER | CLONE_FS

2013-03-14T18:26:37+00:00

commit e66eded8309ebf679d3d3c1f5820d1f2ca332c71 upstream.

Don't allowing sharing the root directory with processes in a
different user namespace.  There doesn't seem to be any point, and to
allow it would require the overhead of putting a user namespace
reference in fs_struct (for permission checks) and incrementing that
reference count on practically every call to fork.

So just perform the inexpensive test of forbidding sharing fs_struct
acrosss processes in different user namespaces.  We already disallow
other forms of threading when unsharing a user namespace so this
should be no real burden in practice.

This updates setns, clone, and unshare to disallow multiple user
namespaces sharing an fs_struct.

Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

ftrace: Update the kconfig for DYNAMIC_FTRACE

2013-03-14T18:26:36+00:00

commit db05021d49a994ee40a9735d9c3cb0060c9babb8 upstream.

The prompt to enable DYNAMIC_FTRACE (the ability to nop and
enable function tracing at run time) had a confusing statement:

 "enable/disable ftrace tracepoints dynamically"

This was written before tracepoints were added to the kernel,
but now that tracepoints have been added, this is very confusing
and has confused people enough to give wrong information during
presentations.

Not only that, I looked at the help text, and it still references
that dreaded daemon that use to wake up once a second to update
the nop locations and brick NICs, that hasn't been around for over
five years.

Time to bring the text up to the current decade.

Reported-by: Ezequiel Garcia 
Signed-off-by: Steven Rostedt 
Signed-off-by: Greg Kroah-Hartman

nohz: Make tick_nohz_irq_exit() irq safe

2013-03-14T18:26:22+00:00

commit e5ab012c3271990e8457055c25cafddc1ae8aa6b upstream.

As it stands, irq_exit() may or may not be called with
irqs disabled, depending on __ARCH_IRQ_EXIT_IRQS_DISABLED
that the arch can define.

It makes tick_nohz_irq_exit() unsafe. For example two
interrupts can race in tick_nohz_stop_sched_tick(): the inner
most one computes the expiring time on top of the timer list,
then it's interrupted right before reprogramming the
clock. The new interrupt enqueues a new timer list timer,
it reprogram the clock to take it into account and it exits.
The CPUs resumes the inner most interrupt and performs the clock
reprogramming without considering the new timer list timer.

This regression has been introduced by:
     280f06774afedf849f0b34248ed6aff57d0f6908
     ("nohz: Separate out irq exit and idle loop dyntick logic")

Let's fix it right now with the appropriate protections.

A saner long term solution will be to remove
__ARCH_IRQ_EXIT_IRQS_DISABLED and mandate that irq_exit() is called
with interrupts disabled.

Signed-off-by: Frederic Weisbecker 
Cc: Peter Zijlstra 
Cc: Ingo Molnar 
Cc: Linus Torvalds 
Link: http://lkml.kernel.org/r/1361373336-11337-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

cgroup: fix exit() vs rmdir() race

2013-03-03T22:03:38+00:00

commit 71b5707e119653039e6e95213f00479668c79b75 upstream.

In cgroup_exit() put_css_set_taskexit() is called without any lock,
which might lead to accessing a freed cgroup:

thread1                           thread2
---------------------------------------------
exit()
  cgroup_exit()
    put_css_set_taskexit()
      atomic_dec(cgrp->count);
                                   rmdir();
      /* not safe !! */
      check_for_release(cgrp);

rcu_read_lock() can be used to make sure the cgroup is alive.

Signed-off-by: Li Zefan 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman