linux-stable.git/kernel, branch v3.2.100

hrtimer: Reset hrtimer cpu base proper on CPU hotplug

2018-03-03T15:51:03+00:00

commit d5421ea43d30701e03cadc56a38854c36a8b4433 upstream.

The hrtimer interrupt code contains a hang detection and mitigation
mechanism, which prevents that a long delayed hrtimer interrupt causes a
continous retriggering of interrupts which prevent the system from making
progress. If a hang is detected then the timer hardware is programmed with
a certain delay into the future and a flag is set in the hrtimer cpu base
which prevents newly enqueued timers from reprogramming the timer hardware
prior to the chosen delay. The subsequent hrtimer interrupt after the delay
clears the flag and resumes normal operation.

If such a hang happens in the last hrtimer interrupt before a CPU is
unplugged then the hang_detected flag is set and stays that way when the
CPU is plugged in again. At that point the timer hardware is not armed and
it cannot be armed because the hang_detected flag is still active, so
nothing clears that flag. As a consequence the CPU does not receive hrtimer
interrupts and no timers expire on that CPU which results in RCU stalls and
other malfunctions.

Clear the flag along with some other less critical members of the hrtimer
cpu base to ensure starting from a clean state when a CPU is plugged in.

Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the
root cause of that hard to reproduce heisenbug. Once understood it's
trivial and certainly justifies a brown paperbag.

Fixes: 41d2e4949377 ("hrtimer: Tune hrtimer_interrupt hang logic")
Reported-by: Paul E. McKenney 
Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: Sebastian Sewior 
Cc: Anna-Maria Gleixner 
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos
[bwh: Backported to 3.2:
 - There's no next_timer field to reset
 - Adjust filename, context]
Signed-off-by: Ben Hutchings

futex: Prevent overflow by strengthen input validation

2018-03-03T15:50:58+00:00

commit fbe0e839d1e22d88810f3ee3e2f1479be4c0aa4a upstream.

UBSAN reports signed integer overflow in kernel/futex.c:

 UBSAN: Undefined behaviour in kernel/futex.c:2041:18
 signed integer overflow:
 0 - -2147483648 cannot be represented in type 'int'

Add a sanity check to catch negative values of nr_wake and nr_requeue.

Signed-off-by: Li Jinyue 
Signed-off-by: Thomas Gleixner 
Cc: peterz@infradead.org
Cc: dvhart@infradead.org
Link: https://lkml.kernel.org/r/1513242294-31786-1-git-send-email-lijinyue@huawei.com
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

ring-buffer: Mask out the info bits when returning buffer page length

2018-03-03T15:50:52+00:00

commit 45d8b80c2ac5d21cd1e2954431fb676bc2b1e099 upstream.

Two info bits were added to the "commit" part of the ring buffer data page
when returned to be consumed. This was to inform the user space readers that
events have been missed, and that the count may be stored at the end of the
page.

What wasn't handled, was the splice code that actually called a function to
return the length of the data in order to zero out the rest of the page
before sending it up to user space. These data bits were returned with the
length making the value negative, and that negative value was not checked.
It was compared to PAGE_SIZE, and only used if the size was less than
PAGE_SIZE. Luckily PAGE_SIZE is unsigned long which made the compare an
unsigned compare, meaning the negative size value did not end up causing a
large portion of memory to be randomly zeroed out.

Fixes: 66a8cb95ed040 ("ring-buffer: Add place holder recording of dropped events")
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Ben Hutchings

posix-timer: Properly check sigevent->sigev_notify

2018-03-03T15:50:47+00:00

commit cef31d9af908243421258f1df35a4a644604efbe upstream.

timer_create() specifies via sigevent->sigev_notify the signal delivery for
the new timer. The valid modes are SIGEV_NONE, SIGEV_SIGNAL, SIGEV_THREAD
and (SIGEV_SIGNAL | SIGEV_THREAD_ID).

The sanity check in good_sigevent() is only checking the valid combination
for the SIGEV_THREAD_ID bit, i.e. SIGEV_SIGNAL, but if SIGEV_THREAD_ID is
not set it accepts any random value.

This has no real effects on the posix timer and signal delivery code, but
it affects show_timer() which handles the output of /proc/$PID/timers. That
function uses a string array to pretty print sigev_notify. The access to
that array has no bound checks, so random sigev_notify cause access beyond
the array bounds.

Add proper checks for the valid notify modes and remove the SIGEV_THREAD_ID
masking from various code pathes as SIGEV_NONE can never be set in
combination with SIGEV_THREAD_ID.

Reported-by: Eric Biggers 
Reported-by: Dmitry Vyukov 
Reported-by: Alexey Dobriyan 
Signed-off-by: Thomas Gleixner 
Cc: John Stultz 
[bwh: Backported to 3.2:
 - Add sig_none variable in common_timer_get(), added earlier upstream
 - Adjust filename, context]
Signed-off-by: Ben Hutchings

kernel: make groups_sort calling a responsibility group_info allocators

2018-03-03T15:50:47+00:00

commit bdcf0a423ea1c40bbb40e7ee483b50fc8aa3d758 upstream.

In testing, we found that nfsd threads may call set_groups in parallel
for the same entry cached in auth.unix.gid, racing in the call of
groups_sort, corrupting the groups for that entry and leading to
permission denials for the client.

This patch:
 - Make groups_sort globally visible.
 - Move the call to groups_sort to the modifiers of group_info
 - Remove the call to groups_sort from set_groups

Link: http://lkml.kernel.org/r/20171211151420.18655-1-thiago.becker@gmail.com
Signed-off-by: Thiago Rafael Becker 
Reviewed-by: Matthew Wilcox 
Reviewed-by: NeilBrown 
Acked-by: "J. Bruce Fields" 
Cc: Al Viro 
Cc: Martin Schwidefsky 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[bwh: Backported to 3.2:
 - Drop change in gss_rpc_xdr.c
 - Adjust context]
Signed-off-by: Ben Hutchings

kdb: Fix handling of kallsyms_symbol_next() return value

2018-03-03T15:50:44+00:00

commit c07d35338081d107e57cf37572d8cc931a8e32e2 upstream.

kallsyms_symbol_next() returns a boolean (true on success). Currently
kdb_read() tests the return value with an inequality that
unconditionally evaluates to true.

This is fixed in the obvious way and, since the conditional branch is
supposed to be unreachable, we also add a WARN_ON().

Reported-by: Dan Carpenter 
Signed-off-by: Daniel Thompson 
Signed-off-by: Jason Wessel 
Signed-off-by: Ben Hutchings

blktrace: fix unlocked access to init/start-stop/teardown

2018-02-13T18:32:15+00:00

commit 1f2cac107c591c24b60b115d6050adc213d10fc0 upstream.

sg.c calls into the blktrace functions without holding the proper queue
mutex for doing setup, start/stop, or teardown.

Add internal unlocked variants, and export the ones that do the proper
locking.

Fixes: 6da127ad0918 ("blktrace: Add blktrace ioctls to SCSI generic devices")
Tested-by: Dmitry Vyukov 
Signed-off-by: Jens Axboe 
Signed-off-by: Ben Hutchings

blktrace: Fix potential deadlock between delete & sysfs ops

2018-02-13T18:32:15+00:00

commit 5acb3cc2c2e9d3020a4fee43763c6463767f1572 upstream.

The lockdep code had reported the following unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(s_active#228);
                               lock(&bdev->bd_mutex/1);
                               lock(s_active#228);
  lock(&bdev->bd_mutex);

 *** DEADLOCK ***

The deadlock may happen when one task (CPU1) is trying to delete a
partition in a block device and another task (CPU0) is accessing
tracing sysfs file (e.g. /sys/block/dm-1/trace/act_mask) in that
partition.

The s_active isn't an actual lock. It is a reference count (kn->count)
on the sysfs (kernfs) file. Removal of a sysfs file, however, require
a wait until all the references are gone. The reference count is
treated like a rwsem using lockdep instrumentation code.

The fact that a thread is in the sysfs callback method or in the
ioctl call means there is a reference to the opended sysfs or device
file. That should prevent the underlying block structure from being
removed.

Instead of using bd_mutex in the block_device structure, a new
blk_trace_mutex is now added to the request_queue structure to protect
access to the blk_trace structure.

Suggested-by: Christoph Hellwig 
Signed-off-by: Waiman Long 
Acked-by: Steven Rostedt (VMware) 

Fix typo in patch subject line, and prune a comment detailing how
the code used to work.

Signed-off-by: Jens Axboe 
Signed-off-by: Ben Hutchings

kprobes, x86/alternatives: Use text_mutex to protect smp_alt_modules

2018-02-13T18:32:14+00:00

commit e846d13958066828a9483d862cc8370a72fadbb6 upstream.

We use alternatives_text_reserved() to check if the address is in
the fixed pieces of alternative reserved, but the problem is that
we don't hold the smp_alt mutex when call this function. So the list
traversal may encounter a deleted list_head if another path is doing
alternatives_smp_module_del().

One solution is that we can hold smp_alt mutex before call this
function, but the difficult point is that the callers of this
functions, arch_prepare_kprobe() and arch_prepare_optimized_kprobe(),
are called inside the text_mutex. So we must hold smp_alt mutex
before we go into these arch dependent code. But we can't now,
the smp_alt mutex is the arch dependent part, only x86 has it.
Maybe we can export another arch dependent callback to solve this.

But there is a simpler way to handle this problem. We can reuse the
text_mutex to protect smp_alt_modules instead of using another mutex.
And all the arch dependent checks of kprobes are inside the text_mutex,
so it's safe now.

Signed-off-by: Zhou Chengming 
Reviewed-by: Masami Hiramatsu 
Acked-by: Steven Rostedt (VMware) 
Cc: Andy Lutomirski 
Cc: Borislav Petkov 
Cc: Brian Gerst 
Cc: Denys Vlasenko 
Cc: H. Peter Anvin 
Cc: Josh Poimboeuf 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: bp@suse.de
Fixes: 2cfa197 "ftrace/alternatives: Introducing *_text_reserved functions"
Link: http://lkml.kernel.org/r/1509585501-79466-1-git-send-email-zhouchengming1@huawei.com
Signed-off-by: Ingo Molnar 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings

x86/smp: Don't ever patch back to UP if we unplug cpus

2018-02-13T18:32:14+00:00

commit 816afe4ff98ee10b1d30fd66361be132a0a5cee6 upstream.

We still patch SMP instructions to UP variants if we boot with a
single CPU, but not at any other time.  In particular, not if we
unplug CPUs to return to a single cpu.

Paul McKenney points out:

 mean offline overhead is 6251/48=130.2 milliseconds.

 If I remove the alternatives_smp_switch() from the offline
 path [...] the mean offline overhead is 550/42=13.1 milliseconds

Basically, we're never going to get those 120ms back, and the
code is pretty messy.

We get rid of:

 1) The "smp-alt-once" boot option. It's actually "smp-alt-boot", the
    documentation is wrong. It's now the default.

 2) The skip_smp_alternatives flag used by suspend.

 3) arch_disable_nonboot_cpus_begin() and arch_disable_nonboot_cpus_end()
    which were only used to set this one flag.

Signed-off-by: Rusty Russell 
Cc: Paul McKenney 
Cc: Suresh Siddha 
Cc: Linus Torvalds 
Cc: Andrew Morton 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/r/87vcgwwive.fsf@rustcorp.com.au
Signed-off-by: Ingo Molnar 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings