linux-stable.git/kernel, branch v3.18.54

sched: panic on corrupted stack end

2017-05-20T12:18:44+00:00

commit 29d6455178a09e1dc340380c582b13356227e8df upstream.

Until now, hitting this BUG_ON caused a recursive oops (because oops
handling involves do_exit(), which calls into the scheduler, which in
turn raises an oops), which caused stuff below the stack to be
overwritten until a panic happened (e.g.  via an oops in interrupt
context, caused by the overwritten CPU index in the thread_info).

Just panic directly.

Signed-off-by: Jann Horn 
Signed-off-by: Linus Torvalds 
[AmitP: Minor refactoring of upstream changes for linux-3.18.y]
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

perf: Fix race in swevent hash

2017-05-20T12:18:43+00:00

commit 12ca6ad2e3a896256f086497a7c7406a547ee373 upstream.

There's a race on CPU unplug where we free the swevent hash array
while it can still have events on. This will result in a
use-after-free which is BAD.

Simply do not free the hash array on unplug. This leaves the thing
around and no use-after-free takes place.

When the last swevent dies, we do a for_each_possible_cpu() iteration
anyway to clean these up, at which time we'll free it, so no leakage
will occur.

Reported-by: Sasha Levin 
Tested-by: Sasha Levin 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Arnaldo Carvalho de Melo 
Cc: Frederic Weisbecker 
Cc: Jiri Olsa 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Cc: Thomas Gleixner 
Cc: Vince Weaver 
Signed-off-by: Ingo Molnar 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

perf: Fix event->ctx locking

2017-05-20T12:18:43+00:00

commit f63a8daa5812afef4f06c962351687e1ff9ccb2b upstream.

There have been a few reported issues wrt. the lack of locking around
changing event->ctx. This patch tries to address those.

It avoids the whole rwsem thing; and while it appears to work, please
give it some thought in review.

What I did fail at is sensible runtime checks on the use of
event->ctx, the RCU use makes it very hard.

Signed-off-by: Peter Zijlstra (Intel) 
Cc: Paul E. McKenney 
Cc: Jiri Olsa 
Cc: Arnaldo Carvalho de Melo 
Cc: Linus Torvalds 
Link: http://lkml.kernel.org/r/20150123125834.209535886@infradead.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

padata: free correct variable

2017-05-20T12:18:42+00:00

commit 07a77929ba672d93642a56dc2255dd21e6e2290b upstream.

The author meant to free the variable that was just allocated, instead
of the one that failed to be allocated, but made a simple typo. This
patch rectifies that.

Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

perf: Tighten (and fix) the grouping condition

2017-05-08T05:44:10+00:00

commit c3c87e770458aa004bd7ed3f29945ff436fd6511 upstream.

The fix from 9fc81d87420d ("perf: Fix events installation during
moving group") was incomplete in that it failed to recognise that
creating a group with events for different CPUs is semantically
broken -- they cannot be co-scheduled.

Furthermore, it leads to real breakage where, when we create an event
for CPU Y and then migrate it to form a group on CPU X, the code gets
confused where the counter is programmed -- triggered in practice
as well by me via the perf fuzzer.

Fix this by tightening the rules for creating groups. Only allow
grouping of counters that can be co-scheduled in the same context.
This means for the same task and/or the same cpu.

Fixes: 9fc81d87420d ("perf: Fix events installation during moving group")
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Cc: Linus Torvalds 
Link: http://lkml.kernel.org/r/20150123125834.090683288@infradead.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

kconfig: tinyconfig: provide whole choice blocks to avoid warnings

2017-04-30T03:49:17+00:00

commit 236dec051078a8691950f56949612b4b74107e48 upstream.

Using "make tinyconfig" produces a couple of annoying warnings that show
up for build test machines all the time:

    .config:966:warning: override: NOHIGHMEM changes choice state
    .config:965:warning: override: SLOB changes choice state
    .config:963:warning: override: KERNEL_XZ changes choice state
    .config:962:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state
    .config:933:warning: override: SLOB changes choice state
    .config:930:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state
    .config:870:warning: override: SLOB changes choice state
    .config:868:warning: override: KERNEL_XZ changes choice state
    .config:867:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state

I've made a previous attempt at fixing them and we discussed a number of
alternatives.

I tried changing the Makefile to use "merge_config.sh -n
$(fragment-list)" but couldn't get that to work properly.

This is yet another approach, based on the observation that we do want
to see a warning for conflicting 'choice' options, and that we can
simply make them non-conflicting by listing all other options as
disabled.  This is a trivial patch that we can apply independent of
plans for other changes.

Link: http://lkml.kernel.org/r/20160829214952.1334674-2-arnd@arndb.de
Link: https://storage.kernelci.org/mainline/v4.7-rc6/x86-tinyconfig/build.log
https://patchwork.kernel.org/patch/9212749/
Signed-off-by: Arnd Bergmann 
Reviewed-by: Josh Triplett 
Reviewed-by: Masahiro Yamada 
Acked-by: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

perf: Avoid horrible stack usage

2017-04-30T03:49:15+00:00

commit 86038c5ea81b519a8a1fcfcd5e4599aab0cdd119 upstream.

Both Linus (most recent) and Steve (a while ago) reported that perf
related callbacks have massive stack bloat.

The problem is that software events need a pt_regs in order to
properly report the event location and unwind stack. And because we
could not assume one was present we allocated one on stack and filled
it with minimal bits required for operation.

Now, pt_regs is quite large, so this is undesirable. Furthermore it
turns out that most sites actually have a pt_regs pointer available,
making this even more onerous, as the stack space is pointless waste.

This patch addresses the problem by observing that software events
have well defined nesting semantics, therefore we can use static
per-cpu storage instead of on-stack.

Linus made the further observation that all but the scheduler callers
of perf_sw_event() have a pt_regs available, so we change the regular
perf_sw_event() to require a valid pt_regs (where it used to be
optional) and add perf_sw_event_sched() for the scheduler.

We have a scheduler specific call instead of a more generic _noregs()
like construct because we can assume non-recursion from the scheduler
and thereby simplify the code further (_noregs would have to put the
recursion context call inline in order to assertain which __perf_regs
element to use).

One last note on the implementation of perf_trace_buf_prepare(); we
allow .regs = NULL for those cases where we already have a pt_regs
pointer available and do not need another.

Reported-by: Linus Torvalds 
Reported-by: Steven Rostedt 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Arnaldo Carvalho de Melo 
Cc: Javi Merino 
Cc: Linus Torvalds 
Cc: Mathieu Desnoyers 
Cc: Oleg Nesterov 
Cc: Paul Mackerras 
Cc: Petr Mladek 
Cc: Steven Rostedt 
Cc: Tom Zanussi 
Cc: Vaibhav Nagarnaik 
Link: http://lkml.kernel.org/r/20141216115041.GW3337@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar 
Cc: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman

ring-buffer: Have ring_buffer_iter_empty() return true when empty

2017-04-30T03:49:13+00:00

commit 78f7a45dac2a2d2002f98a3a95f7979867868d73 upstream.

I noticed that reading the snapshot file when it is empty no longer gives a
status. It suppose to show the status of the snapshot buffer as well as how
to allocate and use it. For example:

 ># cat snapshot
 # tracer: nop
 #
 #
 # * Snapshot is allocated *
 #
 # Snapshot commands:
 # echo 0 > snapshot : Clears and frees snapshot buffer
 # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
 #                      Takes a snapshot of the main buffer.
 # echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
 #                      (Doesn't have to be '2' works with any number that
 #                       is not a '0' or '1')

But instead it just showed an empty buffer:

 ># cat snapshot
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 0/0   #P:4
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |

What happened was that it was using the ring_buffer_iter_empty() function to
see if it was empty, and if it was, it showed the status. But that function
was returning false when it was empty. The reason was that the iter header
page was on the reader page, and the reader page was empty, but so was the
buffer itself. The check only tested to see if the iter was on the commit
page, but the commit page was no longer pointing to the reader page, but as
all pages were empty, the buffer is also.

Fixes: 651e22f2701b ("ring-buffer: Always reset iterator to reader page")
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

tracing: Allocate the snapshot buffer before enabling probe

2017-04-30T03:49:12+00:00

commit df62db5be2e5f070ecd1a5ece5945b590ee112e0 upstream.

Currently the snapshot trigger enables the probe and then allocates the
snapshot. If the probe triggers before the allocation, it could cause the
snapshot to fail and turn tracing off. It's best to allocate the snapshot
buffer first, and then enable the trigger. If something goes wrong in the
enabling of the trigger, the snapshot buffer is still allocated, but it can
also be freed by the user by writting zero into the snapshot buffer file.

Also add a check of the return status of alloc_snapshot().

Fixes: 77fd5c15e3 ("tracing: Add snapshot trigger to function probes")
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

ring-buffer: Fix return value check in test_ringbuffer()

2017-04-22T05:15:06+00:00

commit 62277de758b155dc04b78f195a1cb5208c37b2df upstream.

In case of error, the function kthread_run() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Link: http://lkml.kernel.org/r/1466184839-14927-1-git-send-email-weiyj_lk@163.com

Fixes: 6c43e554a ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Wei Yongjun 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman