linux-stable.git/kernel, branch v3.16.78

alarmtimer: Use EOPNOTSUPP instead of ENOTSUPP

2019-11-22T15:57:30+00:00

commit f18ddc13af981ce3c7b7f26925f099e7c6929aba upstream.

ENOTSUPP is not supposed to be returned to userspace. This was found on an
OpenPower machine, where the RTC does not support set_alarm.

On that system, a clock_nanosleep(CLOCK_REALTIME_ALARM, ...) results in
"524 Unknown error 524"

Replace it with EOPNOTSUPP which results in the expected "95 Operation not
supported" error.

Fixes: 1c6b39ad3f01 (alarmtimers: Return -ENOTSUPP if no RTC device is present)
Signed-off-by: Thadeu Lima de Souza Cascardo 
Signed-off-by: Thomas Gleixner 
Link: https://lkml.kernel.org/r/20190903171802.28314-1-cascardo@canonical.com
[ pvorel: backport for v3.16, changes also in alarm_timer_{del,set}(), which
were removed in f2c45807d3992fe0f173f34af9c347d907c31686 in v4.13-rc1 ]
Signed-off-by: Petr Vorel 
Acked-by: Thadeu Lima de Souza Cascardo 
Signed-off-by: Ben Hutchings

genirq: Prevent NULL pointer dereference in resend_irqs()

2019-11-22T15:57:27+00:00

commit eddf3e9c7c7e4d0707c68d1bb22cc6ec8aef7d4a upstream.

The following crash was observed:

  Unable to handle kernel NULL pointer dereference at 0000000000000158
  Internal error: Oops: 96000004 [#1] SMP
  pc : resend_irqs+0x68/0xb0
  lr : resend_irqs+0x64/0xb0
  ...
  Call trace:
   resend_irqs+0x68/0xb0
   tasklet_action_common.isra.6+0x84/0x138
   tasklet_action+0x2c/0x38
   __do_softirq+0x120/0x324
   run_ksoftirqd+0x44/0x60
   smpboot_thread_fn+0x1ac/0x1e8
   kthread+0x134/0x138
   ret_from_fork+0x10/0x18

The reason for this is that the interrupt resend mechanism happens in soft
interrupt context, which is a asynchronous mechanism versus other
operations on interrupts. free_irq() does not take resend handling into
account. Thus, the irq descriptor might be already freed before the resend
tasklet is executed. resend_irqs() does not check the return value of the
interrupt descriptor lookup and derefences the return value
unconditionally.

  1):
  __setup_irq
    irq_startup
      check_irq_resend  // activate softirq to handle resend irq
  2):
  irq_domain_free_irqs
    irq_free_descs
      free_desc
        call_rcu(&desc->rcu, delayed_free_desc)
  3):
  __do_softirq
    tasklet_action
      resend_irqs
        desc = irq_to_desc(irq)
        desc->handle_irq(desc)  // desc is NULL --> Ooops

Fix this by adding a NULL pointer check in resend_irqs() before derefencing
the irq descriptor.

Fixes: a4633adcdbc1 ("[PATCH] genirq: add genirq sw IRQ-retrigger")
Signed-off-by: Yunfeng Ye 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Zhiqiang Liu 
Link: https://lkml.kernel.org/r/1630ae13-5c8e-901e-de09-e740b6a426a7@huawei.com
Signed-off-by: Ben Hutchings

sched/fair: Don't assign runtime for throttled cfs_rq

2019-11-22T15:57:26+00:00

commit 5e2d2cc2588bd3307ce3937acbc2ed03c830a861 upstream.

do_sched_cfs_period_timer() will refill cfs_b runtime and call
distribute_cfs_runtime to unthrottle cfs_rq, sometimes cfs_b->runtime
will allocate all quota to one cfs_rq incorrectly, then other cfs_rqs
attached to this cfs_b can't get runtime and will be throttled.

We find that one throttled cfs_rq has non-negative
cfs_rq->runtime_remaining and cause an unexpetced cast from s64 to u64
in snippet:

  distribute_cfs_runtime() {
    runtime = -cfs_rq->runtime_remaining + 1;
  }

The runtime here will change to a large number and consume all
cfs_b->runtime in this cfs_b period.

According to Ben Segall, the throttled cfs_rq can have
account_cfs_rq_runtime called on it because it is throttled before
idle_balance, and the idle_balance calls update_rq_clock to add time
that is accounted to the task.

This commit prevents cfs_rq to be assgined new runtime if it has been
throttled until that distribute_cfs_runtime is called.

Signed-off-by: Liangyan 
Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Valentin Schneider 
Reviewed-by: Ben Segall 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: shanpeic@linux.alibaba.com
Cc: xlpang@linux.alibaba.com
Fixes: d3d9dc330236 ("sched: Throttle entities exceeding their allowed bandwidth")
Link: https://lkml.kernel.org/r/20190826121633.6538-1-liangyan.peng@linux.alibaba.com
Signed-off-by: Ingo Molnar 
[bwh: Backported to 3.16: Open-code SCHED_WARN_ON().]
Signed-off-by: Ben Hutchings

sched/fair: Don't free p->numa_faults with concurrent readers

2019-11-22T15:57:07+00:00

commit 16d51a590a8ce3befb1308e0e7ab77f3b661af33 upstream.

When going through execve(), zero out the NUMA fault statistics instead of
freeing them.

During execve, the task is reachable through procfs and the scheduler. A
concurrent /proc/*/sched reader can read data from a freed ->numa_faults
allocation (confirmed by KASAN) and write it back to userspace.
I believe that it would also be possible for a use-after-free read to occur
through a race between a NUMA fault and execve(): task_numa_fault() can
lead to task_numa_compare(), which invokes task_weight() on the currently
running task of a different CPU.

Another way to fix this would be to make ->numa_faults RCU-managed or add
extra locking, but it seems easier to wipe the NUMA fault statistics on
execve.

Signed-off-by: Jann Horn 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Petr Mladek 
Cc: Sergey Senozhatsky 
Cc: Thomas Gleixner 
Cc: Will Deacon 
Fixes: 82727018b0d3 ("sched/numa: Call task_numa_free() from do_execve()")
Link: https://lkml.kernel.org/r/20190716152047.14424-1-jannh@google.com
Signed-off-by: Ingo Molnar 
[bwh: Backported to 3.16: adjust filename, context]
Signed-off-by: Ben Hutchings

padata: use smp_mb in padata_reorder to avoid orphaned padata jobs

2019-10-31T22:15:05+00:00

commit cf144f81a99d1a3928f90b0936accfd3f45c9a0a upstream.

Testing padata with the tcrypt module on a 5.2 kernel...

    # modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3
    # modprobe tcrypt mode=211 sec=1

...produces this splat:

    INFO: task modprobe:10075 blocked for more than 120 seconds.
          Not tainted 5.2.0-base+ #16
    modprobe        D    0 10075  10064 0x80004080
    Call Trace:
     ? __schedule+0x4dd/0x610
     ? ring_buffer_unlock_commit+0x23/0x100
     schedule+0x6c/0x90
     schedule_timeout+0x3b/0x320
     ? trace_buffer_unlock_commit_regs+0x4f/0x1f0
     wait_for_common+0x160/0x1a0
     ? wake_up_q+0x80/0x80
     { crypto_wait_req }             # entries in braces added by hand
     { do_one_aead_op }
     { test_aead_jiffies }
     test_aead_speed.constprop.17+0x681/0xf30 [tcrypt]
     do_test+0x4053/0x6a2b [tcrypt]
     ? 0xffffffffa00f4000
     tcrypt_mod_init+0x50/0x1000 [tcrypt]
     ...

The second modprobe command never finishes because in padata_reorder,
CPU0's load of reorder_objects is executed before the unlocking store in
spin_unlock_bh(pd->lock), causing CPU0 to miss CPU1's increment:

CPU0                                 CPU1

padata_reorder                       padata_do_serial
  LOAD reorder_objects  // 0
                                       INC reorder_objects  // 1
                                       padata_reorder
                                         TRYLOCK pd->lock   // failed
  UNLOCK pd->lock

CPU0 deletes the timer before returning from padata_reorder and since no
other job is submitted to padata, modprobe waits indefinitely.

Add a pair of full barriers to guarantee proper ordering:

CPU0                                 CPU1

padata_reorder                       padata_do_serial
  UNLOCK pd->lock
  smp_mb()
  LOAD reorder_objects
                                       INC reorder_objects
                                       smp_mb__after_atomic()
                                       padata_reorder
                                         TRYLOCK pd->lock

smp_mb__after_atomic is needed so the read part of the trylock operation
comes after the INC, as Andrea points out.   Thanks also to Andrea for
help with writing a litmus test.

Fixes: 16295bec6398 ("padata: Generic parallelization/serialization interface")
Signed-off-by: Daniel Jordan 
Cc: Andrea Parri 
Cc: Boqun Feng 
Cc: Herbert Xu 
Cc: Paul E. McKenney 
Cc: Peter Zijlstra 
Cc: Steffen Klassert 
Cc: linux-arch@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu 
Signed-off-by: Ben Hutchings

signal/pid_namespace: Fix reboot_pid_ns to use send_sig not force_sig

2019-10-31T22:14:51+00:00

commit f9070dc94542093fd516ae4ccea17ef46a4362c5 upstream.

The locking in force_sig_info is not prepared to deal with a task that
exits or execs (as sighand may change).  The is not a locking problem
in force_sig as force_sig is only built to handle synchronous
exceptions.

Further the function force_sig_info changes the signal state if the
signal is ignored, or blocked or if SIGNAL_UNKILLABLE will prevent the
delivery of the signal.  The signal SIGKILL can not be ignored and can
not be blocked and SIGNAL_UNKILLABLE won't prevent it from being
delivered.

So using force_sig rather than send_sig for SIGKILL is confusing
and pointless.

Because it won't impact the sending of the signal and and because
using force_sig is wrong, replace force_sig with send_sig.

Cc: Daniel Lezcano 
Cc: Serge Hallyn 
Cc: Oleg Nesterov 
Fixes: cf3f89214ef6 ("pidns: add reboot_pid_ns() to handle the reboot syscall")
Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Ben Hutchings

tracing/snapshot: Resize spare buffer if size changed

2019-10-05T15:20:07+00:00

commit 46cc0b44428d0f0e81f11ea98217fc0edfbeab07 upstream.

Current snapshot implementation swaps two ring_buffers even though their
sizes are different from each other, that can cause an inconsistency
between the contents of buffer_size_kb file and the current buffer size.

For example:

  # cat buffer_size_kb
  7 (expanded: 1408)
  # echo 1 > events/enable
  # grep bytes per_cpu/cpu0/stats
  bytes: 1441020
  # echo 1 > snapshot             // current:1408, spare:1408
  # echo 123 > buffer_size_kb     // current:123,  spare:1408
  # echo 1 > snapshot             // current:1408, spare:123
  # grep bytes per_cpu/cpu0/stats
  bytes: 1443700
  # cat buffer_size_kb
  123                             // != current:1408

And also, a similar per-cpu case hits the following WARNING:

Reproducer:

  # echo 1 > per_cpu/cpu0/snapshot
  # echo 123 > buffer_size_kb
  # echo 1 > per_cpu/cpu0/snapshot

WARNING:

  WARNING: CPU: 0 PID: 1946 at kernel/trace/trace.c:1607 update_max_tr_single.part.0+0x2b8/0x380
  Modules linked in:
  CPU: 0 PID: 1946 Comm: bash Not tainted 5.2.0-rc6 #20
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
  RIP: 0010:update_max_tr_single.part.0+0x2b8/0x380
  Code: ff e8 dc da f9 ff 0f 0b e9 88 fe ff ff e8 d0 da f9 ff 44 89 ee bf f5 ff ff ff e8 33 dc f9 ff 41 83 fd f5 74 96 e8 b8 da f9 ff <0f> 0b eb 8d e8 af da f9 ff 0f 0b e9 bf fd ff ff e8 a3 da f9 ff 48
  RSP: 0018:ffff888063e4fca0 EFLAGS: 00010093
  RAX: ffff888066214380 RBX: ffffffff99850fe0 RCX: ffffffff964298a8
  RDX: 0000000000000000 RSI: 00000000fffffff5 RDI: 0000000000000005
  RBP: 1ffff1100c7c9f96 R08: ffff888066214380 R09: ffffed100c7c9f9b
  R10: ffffed100c7c9f9a R11: 0000000000000003 R12: 0000000000000000
  R13: 00000000ffffffea R14: ffff888066214380 R15: ffffffff99851060
  FS:  00007f9f8173c700(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000714dc0 CR3: 0000000066fa6000 CR4: 00000000000006f0
  Call Trace:
   ? trace_array_printk_buf+0x140/0x140
   ? __mutex_lock_slowpath+0x10/0x10
   tracing_snapshot_write+0x4c8/0x7f0
   ? trace_printk_init_buffers+0x60/0x60
   ? selinux_file_permission+0x3b/0x540
   ? tracer_preempt_off+0x38/0x506
   ? trace_printk_init_buffers+0x60/0x60
   __vfs_write+0x81/0x100
   vfs_write+0x1e1/0x560
   ksys_write+0x126/0x250
   ? __ia32_sys_read+0xb0/0xb0
   ? do_syscall_64+0x1f/0x390
   do_syscall_64+0xc1/0x390
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

This patch adds resize_buffer_duplicate_size() to check if there is a
difference between current/spare buffer sizes and resize a spare buffer
if necessary.

Link: http://lkml.kernel.org/r/20190625012910.13109-1-devel@etsukata.com

Fixes: ad909e21bbe69 ("tracing: Add internal tracing_snapshot() functions")
Signed-off-by: Eiichi Tsukata 
Signed-off-by: Steven Rostedt (VMware) 
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings

cpu/speculation: Warn on unsupported mitigations= parameter

2019-10-05T15:20:06+00:00

commit 1bf72720281770162c87990697eae1ba2f1d917a upstream.

Currently, if the user specifies an unsupported mitigation strategy on the
kernel command line, it will be ignored silently.  The code will fall back
to the default strategy, possibly leaving the system more vulnerable than
expected.

This may happen due to e.g. a simple typo, or, for a stable kernel release,
because not all mitigation strategies have been backported.

Inform the user by printing a message.

Fixes: 98af8452945c5565 ("cpu/speculation: Add 'mitigations=' cmdline option")
Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Thomas Gleixner 
Acked-by: Josh Poimboeuf 
Cc: Peter Zijlstra 
Cc: Jiri Kosina 
Cc: Greg Kroah-Hartman 
Cc: Ben Hutchings 
Link: https://lkml.kernel.org/r/20190516070935.22546-1-geert@linux-m68k.org
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings

perf/ioctl: Add check for the sample_period value

2019-10-05T15:20:04+00:00

commit 913a90bc5a3a06b1f04c337320e9aeee2328dd77 upstream.

perf_event_open() limits the sample_period to 63 bits. See:

  0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits")

Make ioctl() consistent with it.

Also on PowerPC, negative sample_period could cause a recursive
PMIs leading to a hang (reported when running perf-fuzzer).

Signed-off-by: Ravi Bangoria 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Alexander Shishkin 
Cc: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Cc: Thomas Gleixner 
Cc: Vince Weaver 
Cc: acme@kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: maddy@linux.vnet.ibm.com
Cc: mpe@ellerman.id.au
Fixes: 0819b2e30ccb ("perf: Limit perf_event_attr::sample_period to 63 bits")
Link: https://lkml.kernel.org/r/20190604042953.914-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Ingo Molnar 
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings

perf/core: Fix perf_sample_regs_user() mm check

2019-10-05T15:20:01+00:00

commit 085ebfe937d7a7a5df1729f35a12d6d655fea68c upstream.

perf_sample_regs_user() uses 'current->mm' to test for the presence of
userspace, but this is insufficient, consider use_mm().

A better test is: '!(current->flags & PF_KTHREAD)', exec() clears
PF_KTHREAD after it sets the new ->mm but before it drops to userspace
for the first time.

Possibly obsoletes: bf05fc25f268 ("powerpc/perf: Fix oops when kthread execs user process")

Reported-by: Ravi Bangoria 
Reported-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) 
Acked-by: Will Deacon 
Cc: Arnaldo Carvalho de Melo 
Cc: Frederic Weisbecker 
Cc: Jiri Olsa 
Cc: Linus Torvalds 
Cc: Michael Ellerman 
Cc: Naveen N. Rao 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Cc: Thomas Gleixner 
Fixes: 4018994f3d87 ("perf: Add ability to attach user level registers dump to sample")
Signed-off-by: Ingo Molnar 
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings