linux-stable.git/kernel/trace, branch v5.4.83

tracing: Fix userstacktrace option for instances

2020-12-11T12:23:32+00:00

commit bcee5278958802b40ee8b26679155a6d9231783e upstream.

When the instances were able to use their own options, the userstacktrace
option was left hardcoded for the top level. This made the instance
userstacktrace option bascially into a nop, and will confuse users that set
it, but nothing happens (I was confused when it happened to me!)

Cc: stable@vger.kernel.org
Fixes: 16270145ce6b ("tracing: Add trace options for core options to instances")
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

ftrace: Fix updating FTRACE_FL_TRAMP

2020-12-11T12:23:29+00:00

commit 4c75b0ff4e4bf7a45b5aef9639799719c28d0073 upstream.

On powerpc, kprobe-direct.tc triggered FTRACE_WARN_ON() in
ftrace_get_addr_new() followed by the below message:
  Bad trampoline accounting at: 000000004222522f (wake_up_process+0xc/0x20) (f0000001)

The set of steps leading to this involved:
- modprobe ftrace-direct-too
- enable_probe
- modprobe ftrace-direct
- rmmod ftrace-direct <-- trigger

The problem turned out to be that we were not updating flags in the
ftrace record properly. From the above message about the trampoline
accounting being bad, it can be seen that the ftrace record still has
FTRACE_FL_TRAMP set though ftrace-direct module is going away. This
happens because we are checking if any ftrace_ops has the
FTRACE_FL_TRAMP flag set _before_ updating the filter hash.

The fix for this is to look for any _other_ ftrace_ops that also needs
FTRACE_FL_TRAMP.

Link: https://lkml.kernel.org/r/56c113aa9c3e10c19144a36d9684c7882bf09af5.1606412433.git.naveen.n.rao@linux.vnet.ibm.com

Cc: stable@vger.kernel.org
Fixes: a124692b698b0 ("ftrace: Enable trampoline when rec count returns back to one")
Signed-off-by: Naveen N. Rao 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

tracing: Remove WARN_ON in start_thread()

2020-12-08T09:40:28+00:00

commit 310e3a4b5a4fc718a72201c1e4cf5c64ac6f5442 upstream.

This patch reverts commit 978defee11a5 ("tracing: Do a WARN_ON()
 if start_thread() in hwlat is called when thread exists")

.start hook can be legally called several times if according
tracer is stopped

screen window 1
[root@localhost ~]# echo 1 > /sys/kernel/tracing/events/kmem/kfree/enable
[root@localhost ~]# echo 1 > /sys/kernel/tracing/options/pause-on-trace
[root@localhost ~]# less -F /sys/kernel/tracing/trace

screen window 2
[root@localhost ~]# cat /sys/kernel/debug/tracing/tracing_on
0
[root@localhost ~]# echo hwlat >  /sys/kernel/debug/tracing/current_tracer
[root@localhost ~]# echo 1 > /sys/kernel/debug/tracing/tracing_on
[root@localhost ~]# cat /sys/kernel/debug/tracing/tracing_on
0
[root@localhost ~]# echo 2 > /sys/kernel/debug/tracing/tracing_on

triggers warning in dmesg:
WARNING: CPU: 3 PID: 1403 at kernel/trace/trace_hwlat.c:371 hwlat_tracer_start+0xc9/0xd0

Link: https://lkml.kernel.org/r/bd4d3e70-400d-9c82-7b73-a2d695e86b58@virtuozzo.com

Cc: Ingo Molnar 
Cc: stable@vger.kernel.org
Fixes: 978defee11a5 ("tracing: Do a WARN_ON() if start_thread() in hwlat is called when thread exists")
Signed-off-by: Vasily Averin 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

tracing: Fix the checking of stackidx in __ftrace_trace_stack

2020-11-18T18:20:23+00:00

[ Upstream commit 906695e59324635c62b5ae59df111151a546ca66 ]

The array size is FTRACE_KSTACK_NESTING, so the index FTRACE_KSTACK_NESTING
is illegal too. And fix two typos by the way.

Link: https://lkml.kernel.org/r/20201031085714.2147-1-hqjagain@gmail.com

Signed-off-by: Qiujun Huang 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Sasha Levin

tracing: Fix out of bounds write in get_trace_buf

2020-11-10T11:37:28+00:00

commit c1acb4ac1a892cf08d27efcb964ad281728b0545 upstream.

The nesting count of trace_printk allows for 4 levels of nesting. The
nesting counter starts at zero and is incremented before being used to
retrieve the current context's buffer. But the index to the buffer uses the
nesting counter after it was incremented, and not its original number,
which in needs to do.

Link: https://lkml.kernel.org/r/20201029161905.4269-1-hqjagain@gmail.com

Cc: stable@vger.kernel.org
Fixes: 3d9622c12c887 ("tracing: Add barrier to trace_printk() buffer nesting modification")
Signed-off-by: Qiujun Huang 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

ftrace: Handle tracing when switching between context

2020-11-10T11:37:28+00:00

commit 726b3d3f141fba6f841d715fc4d8a4a84f02c02a upstream.

When an interrupt or NMI comes in and switches the context, there's a delay
from when the preempt_count() shows the update. As the preempt_count() is
used to detect recursion having each context have its own bit get set when
tracing starts, and if that bit is already set, it is considered a recursion
and the function exits. But if this happens in that section where context
has changed but preempt_count() has not been updated, this will be
incorrectly flagged as a recursion.

To handle this case, create another bit call TRANSITION and test it if the
current context bit is already set. Flag the call as a recursion if the
TRANSITION bit is already set, and if not, set it and continue. The
TRANSITION bit will be cleared normally on the return of the function that
set it, or if the current context bit is clear, set it and clear the
TRANSITION bit to allow for another transition between the current context
and an even higher one.

Cc: stable@vger.kernel.org
Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

ftrace: Fix recursion check for NMI test

2020-11-10T11:37:28+00:00

commit ee11b93f95eabdf8198edd4668bf9102e7248270 upstream.

The code that checks recursion will work to only do the recursion check once
if there's nested checks. The top one will do the check, the other nested
checks will see recursion was already checked and return zero for its "bit".
On the return side, nothing will be done if the "bit" is zero.

The problem is that zero is returned for the "good" bit when in NMI context.
This will set the bit for NMIs making it look like *all* NMI tracing is
recursing, and prevent tracing of anything in NMI context!

The simple fix is to return "bit + 1" and subtract that bit on the end to
get the real bit.

Cc: stable@vger.kernel.org
Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

ring-buffer: Fix recursion protection transitions between interrupt context

2020-11-10T11:37:27+00:00

commit b02414c8f045ab3b9afc816c3735bc98c5c3d262 upstream.

The recursion protection of the ring buffer depends on preempt_count() to be
correct. But it is possible that the ring buffer gets called after an
interrupt comes in but before it updates the preempt_count(). This will
trigger a false positive in the recursion code.

Use the same trick from the ftrace function callback recursion code which
uses a "transition" bit that gets set, to allow for a single recursion for
to handle transitions between contexts.

Cc: stable@vger.kernel.org
Fixes: 567cd4da54ff4 ("ring-buffer: User context bit recursion checking")
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

ring-buffer: Return 0 on success from ring_buffer_resize()

2020-11-05T10:43:35+00:00

commit 0a1754b2a97efa644aa6e84d1db5b17c42251483 upstream.

We don't need to check the new buffer size, and the return value
had confused resize_buffer_duplicate_size().
...
	ret = ring_buffer_resize(trace_buf->buffer,
		per_cpu_ptr(size_buf->data,cpu_id)->entries, cpu_id);
	if (ret == 0)
		per_cpu_ptr(trace_buf->data, cpu_id)->entries =
			per_cpu_ptr(size_buf->data, cpu_id)->entries;
...

Link: https://lkml.kernel.org/r/20201019142242.11560-1-hqjagain@gmail.com

Cc: stable@vger.kernel.org
Fixes: d60da506cbeb3 ("tracing: Add a resize function to make one buffer equivalent to another buffer")
Signed-off-by: Qiujun Huang 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

tracing: Make the space reserved for the pid wider

2020-10-07T06:01:27+00:00

[ Upstream commit 795d6379a47bcbb88bd95a69920e4acc52849f88 ]

For 64bit CONFIG_BASE_SMALL=0 systems PID_MAX_LIMIT is set by default to
4194304. During boot the kernel sets a new value based on number of CPUs
but no lower than 32768. It is 1024 per CPU so with 128 CPUs the default
becomes 131072 which needs six digits.
This value can be increased during run time but must not exceed the
initial upper limit.

Systemd sometime after v241 sets it to the upper limit during boot. The
result is that when the pid exceeds five digits, the trace output is a
little hard to read because it is no longer properly padded (same like
on big iron with 98+ CPUs).

Increase the pid padding to seven digits.

Link: https://lkml.kernel.org/r/20200904082331.dcdkrr3bkn3e4qlg@linutronix.de

Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Sasha Levin