<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/kernel/trace, branch v5.10.239</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>ftrace: Fix UAF when lookup kallsym after ftrace disabled</title>
<updated>2025-06-27T10:04:14+00:00</updated>
<author>
<name>Ye Bin</name>
<email>yebin10@huawei.com</email>
</author>
<published>2025-05-29T11:19:54+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=8690cd3258455bbae64f809e1d3ee0f043661c71'/>
<id>8690cd3258455bbae64f809e1d3ee0f043661c71</id>
<content type='text'>
commit f914b52c379c12288b7623bb814d0508dbe7481d upstream.

The following issue happens with a buggy module:

BUG: unable to handle page fault for address: ffffffffc05d0218
PGD 1bd66f067 P4D 1bd66f067 PUD 1bd671067 PMD 101808067 PTE 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
RIP: 0010:sized_strscpy+0x81/0x2f0
RSP: 0018:ffff88812d76fa08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffffc0601010 RCX: dffffc0000000000
RDX: 0000000000000038 RSI: dffffc0000000000 RDI: ffff88812608da2d
RBP: 8080808080808080 R08: ffff88812608da2d R09: ffff88812608da68
R10: ffff88812608d82d R11: ffff88812608d810 R12: 0000000000000038
R13: ffff88812608da2d R14: ffffffffc05d0218 R15: fefefefefefefeff
FS:  00007fef552de740(0000) GS:ffff8884251c7000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc05d0218 CR3: 00000001146f0000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 &lt;TASK&gt;
 ftrace_mod_get_kallsym+0x1ac/0x590
 update_iter_mod+0x239/0x5b0
 s_next+0x5b/0xa0
 seq_read_iter+0x8c9/0x1070
 seq_read+0x249/0x3b0
 proc_reg_read+0x1b0/0x280
 vfs_read+0x17f/0x920
 ksys_read+0xf3/0x1c0
 do_syscall_64+0x5f/0x2e0
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

The above issue may happen as follows:
(1) Add kprobe tracepoint;
(2) insmod test.ko;
(3)  Module triggers ftrace disabled;
(4) rmmod test.ko;
(5) cat /proc/kallsyms; --&gt; Will trigger UAF as test.ko already removed;
ftrace_mod_get_kallsym()
...
strscpy(module_name, mod_map-&gt;mod-&gt;name, MODULE_NAME_LEN);
...

The problem is when a module triggers an issue with ftrace and
sets ftrace_disable. The ftrace_disable is set when an anomaly is
discovered and to prevent any more damage, ftrace stops all text
modification. The issue that happened was that the ftrace_disable stops
more than just the text modification.

When a module is loaded, its init functions can also be traced. Because
kallsyms deletes the init functions after a module has loaded, ftrace
saves them when the module is loaded and function tracing is enabled. This
allows the output of the function trace to show the init function names
instead of just their raw memory addresses.

When a module is removed, ftrace_release_mod() is called, and if
ftrace_disable is set, it just returns without doing anything more. The
problem here is that it leaves the mod_list still around and if kallsyms
is called, it will call into this code and access the module memory that
has already been freed as it will return:

  strscpy(module_name, mod_map-&gt;mod-&gt;name, MODULE_NAME_LEN);

Where the "mod" no longer exists and triggers a UAF bug.

Link: https://lore.kernel.org/all/20250523135452.626d8dcd@gandalf.local.home/

Cc: stable@vger.kernel.org
Fixes: aba4b5c22cba ("ftrace: Save module init functions kallsyms symbols for tracing")
Link: https://lore.kernel.org/20250529111955.2349189-2-yebin@huaweicloud.com
Signed-off-by: Ye Bin &lt;yebin10@huawei.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit f914b52c379c12288b7623bb814d0508dbe7481d upstream.

The following issue happens with a buggy module:

BUG: unable to handle page fault for address: ffffffffc05d0218
PGD 1bd66f067 P4D 1bd66f067 PUD 1bd671067 PMD 101808067 PTE 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
RIP: 0010:sized_strscpy+0x81/0x2f0
RSP: 0018:ffff88812d76fa08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffffc0601010 RCX: dffffc0000000000
RDX: 0000000000000038 RSI: dffffc0000000000 RDI: ffff88812608da2d
RBP: 8080808080808080 R08: ffff88812608da2d R09: ffff88812608da68
R10: ffff88812608d82d R11: ffff88812608d810 R12: 0000000000000038
R13: ffff88812608da2d R14: ffffffffc05d0218 R15: fefefefefefefeff
FS:  00007fef552de740(0000) GS:ffff8884251c7000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc05d0218 CR3: 00000001146f0000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 &lt;TASK&gt;
 ftrace_mod_get_kallsym+0x1ac/0x590
 update_iter_mod+0x239/0x5b0
 s_next+0x5b/0xa0
 seq_read_iter+0x8c9/0x1070
 seq_read+0x249/0x3b0
 proc_reg_read+0x1b0/0x280
 vfs_read+0x17f/0x920
 ksys_read+0xf3/0x1c0
 do_syscall_64+0x5f/0x2e0
 entry_SYSCALL_64_after_hwframe+0x76/0x7e

The above issue may happen as follows:
(1) Add kprobe tracepoint;
(2) insmod test.ko;
(3)  Module triggers ftrace disabled;
(4) rmmod test.ko;
(5) cat /proc/kallsyms; --&gt; Will trigger UAF as test.ko already removed;
ftrace_mod_get_kallsym()
...
strscpy(module_name, mod_map-&gt;mod-&gt;name, MODULE_NAME_LEN);
...

The problem is when a module triggers an issue with ftrace and
sets ftrace_disable. The ftrace_disable is set when an anomaly is
discovered and to prevent any more damage, ftrace stops all text
modification. The issue that happened was that the ftrace_disable stops
more than just the text modification.

When a module is loaded, its init functions can also be traced. Because
kallsyms deletes the init functions after a module has loaded, ftrace
saves them when the module is loaded and function tracing is enabled. This
allows the output of the function trace to show the init function names
instead of just their raw memory addresses.

When a module is removed, ftrace_release_mod() is called, and if
ftrace_disable is set, it just returns without doing anything more. The
problem here is that it leaves the mod_list still around and if kallsyms
is called, it will call into this code and access the module memory that
has already been freed as it will return:

  strscpy(module_name, mod_map-&gt;mod-&gt;name, MODULE_NAME_LEN);

Where the "mod" no longer exists and triggers a UAF bug.

Link: https://lore.kernel.org/all/20250523135452.626d8dcd@gandalf.local.home/

Cc: stable@vger.kernel.org
Fixes: aba4b5c22cba ("ftrace: Save module init functions kallsyms symbols for tracing")
Link: https://lore.kernel.org/20250529111955.2349189-2-yebin@huaweicloud.com
Signed-off-by: Ye Bin &lt;yebin10@huawei.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpf: Fix WARN() in get_bpf_raw_tp_regs</title>
<updated>2025-06-27T10:04:03+00:00</updated>
<author>
<name>Tao Chen</name>
<email>chen.dylane@linux.dev</email>
</author>
<published>2025-05-13T04:27:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=147ea936fc6fa8fe0c93f0df918803a5375ca535'/>
<id>147ea936fc6fa8fe0c93f0df918803a5375ca535</id>
<content type='text'>
[ Upstream commit 3880cdbed1c4607e378f58fa924c5d6df900d1d3 ]

syzkaller reported an issue:

WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
Modules linked in:
CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
RSP: 0018:ffffc90003636fa8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff81c6bc4c
RDX: ffff888032efc880 RSI: ffffffff81c6bc83 RDI: 0000000000000005
RBP: ffff88806a730860 R08: 0000000000000005 R09: 0000000000000003
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004
R13: 0000000000000001 R14: ffffc90003637008 R15: 0000000000000900
FS:  0000000000000000(0000) GS:ffff8880d6cdf000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7baee09130 CR3: 0000000029f5a000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 &lt;TASK&gt;
 ____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1934 [inline]
 bpf_get_stack_raw_tp+0x24/0x160 kernel/trace/bpf_trace.c:1931
 bpf_prog_ec3b2eefa702d8d3+0x43/0x47
 bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
 __bpf_prog_run include/linux/filter.h:718 [inline]
 bpf_prog_run include/linux/filter.h:725 [inline]
 __bpf_trace_run kernel/trace/bpf_trace.c:2363 [inline]
 bpf_trace_run3+0x23f/0x5a0 kernel/trace/bpf_trace.c:2405
 __bpf_trace_mmap_lock_acquire_returned+0xfc/0x140 include/trace/events/mmap_lock.h:47
 __traceiter_mmap_lock_acquire_returned+0x79/0xc0 include/trace/events/mmap_lock.h:47
 __do_trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
 trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
 __mmap_lock_do_trace_acquire_returned+0x138/0x1f0 mm/mmap_lock.c:35
 __mmap_lock_trace_acquire_returned include/linux/mmap_lock.h:36 [inline]
 mmap_read_trylock include/linux/mmap_lock.h:204 [inline]
 stack_map_get_build_id_offset+0x535/0x6f0 kernel/bpf/stackmap.c:157
 __bpf_get_stack+0x307/0xa10 kernel/bpf/stackmap.c:483
 ____bpf_get_stack kernel/bpf/stackmap.c:499 [inline]
 bpf_get_stack+0x32/0x40 kernel/bpf/stackmap.c:496
 ____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1941 [inline]
 bpf_get_stack_raw_tp+0x124/0x160 kernel/trace/bpf_trace.c:1931
 bpf_prog_ec3b2eefa702d8d3+0x43/0x47

Tracepoint like trace_mmap_lock_acquire_returned may cause nested call
as the corner case show above, which will be resolved with more general
method in the future. As a result, WARN_ON_ONCE will be triggered. As
Alexei suggested, remove the WARN_ON_ONCE first.

Fixes: 9594dc3c7e71 ("bpf: fix nested bpf tracepoints with per-cpu data")
Reported-by: syzbot+45b0c89a0fc7ae8dbadc@syzkaller.appspotmail.com
Suggested-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Signed-off-by: Tao Chen &lt;chen.dylane@linux.dev&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Link: https://lore.kernel.org/bpf/20250513042747.757042-1-chen.dylane@linux.dev

Closes: https://lore.kernel.org/bpf/8bc2554d-1052-4922-8832-e0078a033e1d@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 3880cdbed1c4607e378f58fa924c5d6df900d1d3 ]

syzkaller reported an issue:

WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
Modules linked in:
CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
RSP: 0018:ffffc90003636fa8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff81c6bc4c
RDX: ffff888032efc880 RSI: ffffffff81c6bc83 RDI: 0000000000000005
RBP: ffff88806a730860 R08: 0000000000000005 R09: 0000000000000003
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004
R13: 0000000000000001 R14: ffffc90003637008 R15: 0000000000000900
FS:  0000000000000000(0000) GS:ffff8880d6cdf000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7baee09130 CR3: 0000000029f5a000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 &lt;TASK&gt;
 ____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1934 [inline]
 bpf_get_stack_raw_tp+0x24/0x160 kernel/trace/bpf_trace.c:1931
 bpf_prog_ec3b2eefa702d8d3+0x43/0x47
 bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
 __bpf_prog_run include/linux/filter.h:718 [inline]
 bpf_prog_run include/linux/filter.h:725 [inline]
 __bpf_trace_run kernel/trace/bpf_trace.c:2363 [inline]
 bpf_trace_run3+0x23f/0x5a0 kernel/trace/bpf_trace.c:2405
 __bpf_trace_mmap_lock_acquire_returned+0xfc/0x140 include/trace/events/mmap_lock.h:47
 __traceiter_mmap_lock_acquire_returned+0x79/0xc0 include/trace/events/mmap_lock.h:47
 __do_trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
 trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
 __mmap_lock_do_trace_acquire_returned+0x138/0x1f0 mm/mmap_lock.c:35
 __mmap_lock_trace_acquire_returned include/linux/mmap_lock.h:36 [inline]
 mmap_read_trylock include/linux/mmap_lock.h:204 [inline]
 stack_map_get_build_id_offset+0x535/0x6f0 kernel/bpf/stackmap.c:157
 __bpf_get_stack+0x307/0xa10 kernel/bpf/stackmap.c:483
 ____bpf_get_stack kernel/bpf/stackmap.c:499 [inline]
 bpf_get_stack+0x32/0x40 kernel/bpf/stackmap.c:496
 ____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1941 [inline]
 bpf_get_stack_raw_tp+0x124/0x160 kernel/trace/bpf_trace.c:1931
 bpf_prog_ec3b2eefa702d8d3+0x43/0x47

Tracepoint like trace_mmap_lock_acquire_returned may cause nested call
as the corner case show above, which will be resolved with more general
method in the future. As a result, WARN_ON_ONCE will be triggered. As
Alexei suggested, remove the WARN_ON_ONCE first.

Fixes: 9594dc3c7e71 ("bpf: fix nested bpf tracepoints with per-cpu data")
Reported-by: syzbot+45b0c89a0fc7ae8dbadc@syzkaller.appspotmail.com
Suggested-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Signed-off-by: Tao Chen &lt;chen.dylane@linux.dev&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Link: https://lore.kernel.org/bpf/20250513042747.757042-1-chen.dylane@linux.dev

Closes: https://lore.kernel.org/bpf/8bc2554d-1052-4922-8832-e0078a033e1d@gmail.com
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tracing: Fix compilation warning on arm32</title>
<updated>2025-06-27T10:03:59+00:00</updated>
<author>
<name>Pan Taixi</name>
<email>pantaixi@huaweicloud.com</email>
</author>
<published>2025-05-26T01:37:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3c735c4470e5805e8d441db2ed0b04fbfec41b9b'/>
<id>3c735c4470e5805e8d441db2ed0b04fbfec41b9b</id>
<content type='text'>
commit 2fbdb6d8e03b70668c0876e635506540ae92ab05 upstream.

On arm32, size_t is defined to be unsigned int, while PAGE_SIZE is
unsigned long. This hence triggers a compilation warning as min()
asserts the type of two operands to be equal. Casting PAGE_SIZE to size_t
solves this issue and works on other target architectures as well.

Compilation warning details:

kernel/trace/trace.c: In function 'tracing_splice_read_pipe':
./include/linux/minmax.h:20:28: warning: comparison of distinct pointer types lacks a cast
  (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
                            ^
./include/linux/minmax.h:26:4: note: in expansion of macro '__typecheck'
   (__typecheck(x, y) &amp;&amp; __no_side_effects(x, y))
    ^~~~~~~~~~~

...

kernel/trace/trace.c:6771:8: note: in expansion of macro 'min'
        min((size_t)trace_seq_used(&amp;iter-&gt;seq),
        ^~~

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250526013731.1198030-1-pantaixi@huaweicloud.com
Fixes: f5178c41bb43 ("tracing: Fix oob write in trace_seq_to_buffer()")
Reviewed-by: Jeongjun Park &lt;aha310510@gmail.com&gt;
Signed-off-by: Pan Taixi &lt;pantaixi@huaweicloud.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 2fbdb6d8e03b70668c0876e635506540ae92ab05 upstream.

On arm32, size_t is defined to be unsigned int, while PAGE_SIZE is
unsigned long. This hence triggers a compilation warning as min()
asserts the type of two operands to be equal. Casting PAGE_SIZE to size_t
solves this issue and works on other target architectures as well.

Compilation warning details:

kernel/trace/trace.c: In function 'tracing_splice_read_pipe':
./include/linux/minmax.h:20:28: warning: comparison of distinct pointer types lacks a cast
  (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
                            ^
./include/linux/minmax.h:26:4: note: in expansion of macro '__typecheck'
   (__typecheck(x, y) &amp;&amp; __no_side_effects(x, y))
    ^~~~~~~~~~~

...

kernel/trace/trace.c:6771:8: note: in expansion of macro 'min'
        min((size_t)trace_seq_used(&amp;iter-&gt;seq),
        ^~~

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250526013731.1198030-1-pantaixi@huaweicloud.com
Fixes: f5178c41bb43 ("tracing: Fix oob write in trace_seq_to_buffer()")
Reviewed-by: Jeongjun Park &lt;aha310510@gmail.com&gt;
Signed-off-by: Pan Taixi &lt;pantaixi@huaweicloud.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tracing: Fix oob write in trace_seq_to_buffer()</title>
<updated>2025-06-04T12:36:51+00:00</updated>
<author>
<name>Jeongjun Park</name>
<email>aha310510@gmail.com</email>
</author>
<published>2025-04-22T11:30:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=665ce421041890571852422487f4c613d1824ba9'/>
<id>665ce421041890571852422487f4c613d1824ba9</id>
<content type='text'>
commit f5178c41bb43444a6008150fe6094497135d07cb upstream.

syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260

CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
 &lt;TASK&gt;
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
 print_address_description mm/kasan/report.c:408 [inline]
 print_report+0xc3/0x670 mm/kasan/report.c:521
 kasan_report+0xe0/0x110 mm/kasan/report.c:634
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
 __asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
 trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
 tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
 ....
==================================================================

It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&amp;iter-&gt;seq) and PAGE_SIZE as an argument.

Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com
Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com
Fixes: 3c56819b14b0 ("tracing: splice support for tracing_pipe")
Suggested-by: Steven Rostedt &lt;rostedt@goodmis.org&gt;
Signed-off-by: Jeongjun Park &lt;aha310510@gmail.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit f5178c41bb43444a6008150fe6094497135d07cb upstream.

syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260

CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
 &lt;TASK&gt;
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
 print_address_description mm/kasan/report.c:408 [inline]
 print_report+0xc3/0x670 mm/kasan/report.c:521
 kasan_report+0xe0/0x110 mm/kasan/report.c:634
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
 __asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
 trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
 tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
 ....
==================================================================

It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&amp;iter-&gt;seq) and PAGE_SIZE as an argument.

Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com
Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com
Fixes: 3c56819b14b0 ("tracing: splice support for tracing_pipe")
Suggested-by: Steven Rostedt &lt;rostedt@goodmis.org&gt;
Signed-off-by: Jeongjun Park &lt;aha310510@gmail.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tracing: Fix synth event printk format for str fields</title>
<updated>2025-05-02T05:41:10+00:00</updated>
<author>
<name>Douglas Raillard</name>
<email>douglas.raillard@arm.com</email>
</author>
<published>2025-03-25T16:52:02+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=385b6bf9683eeccd25440c54b5f598cdba28b0db'/>
<id>385b6bf9683eeccd25440c54b5f598cdba28b0db</id>
<content type='text'>
[ Upstream commit 4d38328eb442dc06aec4350fd9594ffa6488af02 ]

The printk format for synth event uses "%.*s" to print string fields,
but then only passes the pointer part as var arg.

Replace %.*s with %s as the C string is guaranteed to be null-terminated.

The output in print fmt should never have been updated as __get_str()
handles the string limit because it can access the length of the string in
the string meta data that is saved in the ring buffer.

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu &lt;mhiramat@kernel.org&gt;
Cc: Mathieu Desnoyers &lt;mathieu.desnoyers@efficios.com&gt;
Fixes: 8db4d6bfbbf92 ("tracing: Change synthetic event string format to limit printed length")
Link: https://lore.kernel.org/20250325165202.541088-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard &lt;douglas.raillard@arm.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 4d38328eb442dc06aec4350fd9594ffa6488af02 ]

The printk format for synth event uses "%.*s" to print string fields,
but then only passes the pointer part as var arg.

Replace %.*s with %s as the C string is guaranteed to be null-terminated.

The output in print fmt should never have been updated as __get_str()
handles the string limit because it can access the length of the string in
the string meta data that is saved in the ring buffer.

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu &lt;mhiramat@kernel.org&gt;
Cc: Mathieu Desnoyers &lt;mathieu.desnoyers@efficios.com&gt;
Fixes: 8db4d6bfbbf92 ("tracing: Change synthetic event string format to limit printed length")
Link: https://lore.kernel.org/20250325165202.541088-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard &lt;douglas.raillard@arm.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tracing: Allow synthetic events to pass around stacktraces</title>
<updated>2025-05-02T05:41:10+00:00</updated>
<author>
<name>Steven Rostedt (Google)</name>
<email>rostedt@goodmis.org</email>
</author>
<published>2023-01-17T15:21:28+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b9453380c1c542fd095a4dbe9251eeba4022bbce'/>
<id>b9453380c1c542fd095a4dbe9251eeba4022bbce</id>
<content type='text'>
[ Upstream commit 00cf3d672a9dd409418647e9f98784c339c3ff63 ]

Allow a stacktrace from one event to be displayed by the end event of a
synthetic event. This is very useful when looking for the longest latency
of a sleep or something blocked on I/O.

 # cd /sys/kernel/tracing/
 # echo 's:block_lat pid_t pid; u64 delta; unsigned long[] stack;' &gt; dynamic_events
 # echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=stacktrace  if prev_state == 1||prev_state == 2' &gt; events/sched/sched_switch/trigger
 # echo 'hist:keys=prev_pid:delta=common_timestamp.usecs-$ts,s=$st:onmax($delta).trace(block_lat,prev_pid,$delta,$s)' &gt;&gt; events/sched/sched_switch/trigger

The above creates a "block_lat" synthetic event that take the stacktrace of
when a task schedules out in either the interruptible or uninterruptible
states, and on a new per process max $delta (the time it was scheduled
out), will print the process id and the stacktrace.

  # echo 1 &gt; events/synthetic/block_lat/enable
  # cat trace
 #           TASK-PID     CPU#  |||||  TIMESTAMP  FUNCTION
 #              | |         |   |||||     |         |
    kworker/u16:0-767     [006] d..4.   560.645045: block_lat: pid=767 delta=66 stack=STACK:
 =&gt; __schedule
 =&gt; schedule
 =&gt; pipe_read
 =&gt; vfs_read
 =&gt; ksys_read
 =&gt; do_syscall_64
 =&gt; 0x966000aa

           &lt;idle&gt;-0       [003] d..4.   561.132117: block_lat: pid=0 delta=413787 stack=STACK:
 =&gt; __schedule
 =&gt; schedule
 =&gt; schedule_hrtimeout_range_clock
 =&gt; do_sys_poll
 =&gt; __x64_sys_poll
 =&gt; do_syscall_64
 =&gt; 0x966000aa

            &lt;...&gt;-153     [006] d..4.   562.068407: block_lat: pid=153 delta=54 stack=STACK:
 =&gt; __schedule
 =&gt; schedule
 =&gt; io_schedule
 =&gt; rq_qos_wait
 =&gt; wbt_wait
 =&gt; __rq_qos_throttle
 =&gt; blk_mq_submit_bio
 =&gt; submit_bio_noacct_nocheck
 =&gt; ext4_bio_write_page
 =&gt; mpage_submit_page
 =&gt; mpage_process_page_bufs
 =&gt; mpage_prepare_extent_to_map
 =&gt; ext4_do_writepages
 =&gt; ext4_writepages
 =&gt; do_writepages
 =&gt; __writeback_single_inode

Link: https://lkml.kernel.org/r/20230117152236.010941267@goodmis.org

Cc: Masami Hiramatsu &lt;mhiramat@kernel.org&gt;
Cc: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Cc: Tom Zanussi &lt;zanussi@kernel.org&gt;
Cc: Ross Zwisler &lt;zwisler@google.com&gt;
Cc: Ching-lin Yu &lt;chinglinyu@google.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Stable-dep-of: 4d38328eb442 ("tracing: Fix synth event printk format for str fields")
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 00cf3d672a9dd409418647e9f98784c339c3ff63 ]

Allow a stacktrace from one event to be displayed by the end event of a
synthetic event. This is very useful when looking for the longest latency
of a sleep or something blocked on I/O.

 # cd /sys/kernel/tracing/
 # echo 's:block_lat pid_t pid; u64 delta; unsigned long[] stack;' &gt; dynamic_events
 # echo 'hist:keys=next_pid:ts=common_timestamp.usecs,st=stacktrace  if prev_state == 1||prev_state == 2' &gt; events/sched/sched_switch/trigger
 # echo 'hist:keys=prev_pid:delta=common_timestamp.usecs-$ts,s=$st:onmax($delta).trace(block_lat,prev_pid,$delta,$s)' &gt;&gt; events/sched/sched_switch/trigger

The above creates a "block_lat" synthetic event that take the stacktrace of
when a task schedules out in either the interruptible or uninterruptible
states, and on a new per process max $delta (the time it was scheduled
out), will print the process id and the stacktrace.

  # echo 1 &gt; events/synthetic/block_lat/enable
  # cat trace
 #           TASK-PID     CPU#  |||||  TIMESTAMP  FUNCTION
 #              | |         |   |||||     |         |
    kworker/u16:0-767     [006] d..4.   560.645045: block_lat: pid=767 delta=66 stack=STACK:
 =&gt; __schedule
 =&gt; schedule
 =&gt; pipe_read
 =&gt; vfs_read
 =&gt; ksys_read
 =&gt; do_syscall_64
 =&gt; 0x966000aa

           &lt;idle&gt;-0       [003] d..4.   561.132117: block_lat: pid=0 delta=413787 stack=STACK:
 =&gt; __schedule
 =&gt; schedule
 =&gt; schedule_hrtimeout_range_clock
 =&gt; do_sys_poll
 =&gt; __x64_sys_poll
 =&gt; do_syscall_64
 =&gt; 0x966000aa

            &lt;...&gt;-153     [006] d..4.   562.068407: block_lat: pid=153 delta=54 stack=STACK:
 =&gt; __schedule
 =&gt; schedule
 =&gt; io_schedule
 =&gt; rq_qos_wait
 =&gt; wbt_wait
 =&gt; __rq_qos_throttle
 =&gt; blk_mq_submit_bio
 =&gt; submit_bio_noacct_nocheck
 =&gt; ext4_bio_write_page
 =&gt; mpage_submit_page
 =&gt; mpage_process_page_bufs
 =&gt; mpage_prepare_extent_to_map
 =&gt; ext4_do_writepages
 =&gt; ext4_writepages
 =&gt; do_writepages
 =&gt; __writeback_single_inode

Link: https://lkml.kernel.org/r/20230117152236.010941267@goodmis.org

Cc: Masami Hiramatsu &lt;mhiramat@kernel.org&gt;
Cc: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Cc: Tom Zanussi &lt;zanussi@kernel.org&gt;
Cc: Ross Zwisler &lt;zwisler@google.com&gt;
Cc: Ching-lin Yu &lt;chinglinyu@google.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Stable-dep-of: 4d38328eb442 ("tracing: Fix synth event printk format for str fields")
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tracing: Fix filter string testing</title>
<updated>2025-05-02T05:41:02+00:00</updated>
<author>
<name>Steven Rostedt</name>
<email>rostedt@goodmis.org</email>
</author>
<published>2025-04-17T22:30:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0880cfaf7d8192273c85cff7c314cafbfe34808b'/>
<id>0880cfaf7d8192273c85cff7c314cafbfe34808b</id>
<content type='text'>
commit a8c5b0ed89a3f2c81c6ae0b041394e6eea0e7024 upstream.

The filter string testing uses strncpy_from_kernel/user_nofault() to
retrieve the string to test the filter against. The if() statement was
incorrect as it considered 0 as a fault, when it is only negative that it
faulted.

Running the following commands:

  # cd /sys/kernel/tracing
  # echo "filename.ustring ~ \"/proc*\"" &gt; events/syscalls/sys_enter_openat/filter
  # echo 1 &gt; events/syscalls/sys_enter_openat/enable
  # ls /proc/$$/maps
  # cat trace

Would produce nothing, but with the fix it will produce something like:

      ls-1192    [007] .....  8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)

Link: https://lore.kernel.org/all/CAEf4BzbVPQ=BjWztmEwBPRKHUwNfKBkS3kce-Rzka6zvbQeVpg@mail.gmail.com/

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu &lt;mhiramat@kernel.org&gt;
Cc: Mathieu Desnoyers &lt;mathieu.desnoyers@efficios.com&gt;
Cc: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Link: https://lore.kernel.org/20250417183003.505835fb@gandalf.local.home
Fixes: 77360f9bbc7e5 ("tracing: Add test for user space strings when filtering on string pointers")
Reported-by: Andrii Nakryiko &lt;andrii.nakryiko@gmail.com&gt;
Reported-by: Mykyta Yatsenko &lt;mykyta.yatsenko5@gmail.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit a8c5b0ed89a3f2c81c6ae0b041394e6eea0e7024 upstream.

The filter string testing uses strncpy_from_kernel/user_nofault() to
retrieve the string to test the filter against. The if() statement was
incorrect as it considered 0 as a fault, when it is only negative that it
faulted.

Running the following commands:

  # cd /sys/kernel/tracing
  # echo "filename.ustring ~ \"/proc*\"" &gt; events/syscalls/sys_enter_openat/filter
  # echo 1 &gt; events/syscalls/sys_enter_openat/enable
  # ls /proc/$$/maps
  # cat trace

Would produce nothing, but with the fix it will produce something like:

      ls-1192    [007] .....  8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)

Link: https://lore.kernel.org/all/CAEf4BzbVPQ=BjWztmEwBPRKHUwNfKBkS3kce-Rzka6zvbQeVpg@mail.gmail.com/

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu &lt;mhiramat@kernel.org&gt;
Cc: Mathieu Desnoyers &lt;mathieu.desnoyers@efficios.com&gt;
Cc: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Link: https://lore.kernel.org/20250417183003.505835fb@gandalf.local.home
Fixes: 77360f9bbc7e5 ("tracing: Add test for user space strings when filtering on string pointers")
Reported-by: Andrii Nakryiko &lt;andrii.nakryiko@gmail.com&gt;
Reported-by: Mykyta Yatsenko &lt;mykyta.yatsenko5@gmail.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ftrace: Add cond_resched() to ftrace_graph_set_hash()</title>
<updated>2025-05-02T05:40:56+00:00</updated>
<author>
<name>zhoumin</name>
<email>teczm@foxmail.com</email>
</author>
<published>2025-03-31T17:00:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=618655d54c5f8af5d57b77491d08c0f0ff77d114'/>
<id>618655d54c5f8af5d57b77491d08c0f0ff77d114</id>
<content type='text'>
commit 42ea22e754ba4f2b86f8760ca27f6f71da2d982c upstream.

When the kernel contains a large number of functions that can be traced,
the loop in ftrace_graph_set_hash() may take a lot of time to execute.
This may trigger the softlockup watchdog.

Add cond_resched() within the loop to allow the kernel to remain
responsive even when processing a large number of functions.

This matches the cond_resched() that is used in other locations of the
code that iterates over all functions that can be traced.

Cc: stable@vger.kernel.org
Fixes: b9b0c831bed26 ("ftrace: Convert graph filter to use hash tables")
Link: https://lore.kernel.org/tencent_3E06CE338692017B5809534B9C5C03DA7705@qq.com
Signed-off-by: zhoumin &lt;teczm@foxmail.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 42ea22e754ba4f2b86f8760ca27f6f71da2d982c upstream.

When the kernel contains a large number of functions that can be traced,
the loop in ftrace_graph_set_hash() may take a lot of time to execute.
This may trigger the softlockup watchdog.

Add cond_resched() within the loop to allow the kernel to remain
responsive even when processing a large number of functions.

This matches the cond_resched() that is used in other locations of the
code that iterates over all functions that can be traced.

Cc: stable@vger.kernel.org
Fixes: b9b0c831bed26 ("ftrace: Convert graph filter to use hash tables")
Link: https://lore.kernel.org/tencent_3E06CE338692017B5809534B9C5C03DA7705@qq.com
Signed-off-by: zhoumin &lt;teczm@foxmail.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER</title>
<updated>2025-05-02T05:40:50+00:00</updated>
<author>
<name>Gabriele Paoloni</name>
<email>gpaoloni@redhat.com</email>
</author>
<published>2025-03-21T17:08:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=6a3559d09c83d4cb7913716ed33aa25c5472ea66'/>
<id>6a3559d09c83d4cb7913716ed33aa25c5472ea66</id>
<content type='text'>
[ Upstream commit 0c588ac0ca6c22b774d9ad4a6594681fdfa57d9d ]

When __ftrace_event_enable_disable invokes the class callback to
unregister the event, the return value is not reported up to the
caller, hence leading to event unregister failures being silently
ignored.

This patch assigns the ret variable to the invocation of the
event unregister callback, so that its return value is stored
and reported to the caller, and it raises a warning in case
of error.

Link: https://lore.kernel.org/20250321170821.101403-1-gpaoloni@redhat.com
Signed-off-by: Gabriele Paoloni &lt;gpaoloni@redhat.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 0c588ac0ca6c22b774d9ad4a6594681fdfa57d9d ]

When __ftrace_event_enable_disable invokes the class callback to
unregister the event, the return value is not reported up to the
caller, hence leading to event unregister failures being silently
ignored.

This patch assigns the ret variable to the invocation of the
event unregister callback, so that its return value is stored
and reported to the caller, and it raises a warning in case
of error.

Link: https://lore.kernel.org/20250321170821.101403-1-gpaoloni@redhat.com
Signed-off-by: Gabriele Paoloni &lt;gpaoloni@redhat.com&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tracing: Do not use PERF enums when perf is not defined</title>
<updated>2025-04-10T12:31:02+00:00</updated>
<author>
<name>Steven Rostedt</name>
<email>rostedt@goodmis.org</email>
</author>
<published>2025-03-23T19:21:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2233f99ac85f5a555ebb5fe953c08ccdfa797b56'/>
<id>2233f99ac85f5a555ebb5fe953c08ccdfa797b56</id>
<content type='text'>
commit 8eb1518642738c6892bd629b46043513a3bf1a6a upstream.

An update was made to up the module ref count when a synthetic event is
registered for both trace and perf events. But if perf is not configured
in, the perf enums used will cause the kernel to fail to build.

Cc: Masami Hiramatsu &lt;mhiramat@kernel.org&gt;
Cc: Mathieu Desnoyers &lt;mathieu.desnoyers@efficios.com&gt;
Cc: Douglas Raillard &lt;douglas.raillard@arm.com&gt;
Link: https://lore.kernel.org/20250323152151.528b5ced@batman.local.home
Fixes: 21581dd4e7ff ("tracing: Ensure module defining synth event cannot be unloaded while tracing")
Reported-by: kernel test robot &lt;lkp@intel.com&gt;
Closes: https://lore.kernel.org/oe-kbuild-all/202503232230.TeREVy8R-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 8eb1518642738c6892bd629b46043513a3bf1a6a upstream.

An update was made to up the module ref count when a synthetic event is
registered for both trace and perf events. But if perf is not configured
in, the perf enums used will cause the kernel to fail to build.

Cc: Masami Hiramatsu &lt;mhiramat@kernel.org&gt;
Cc: Mathieu Desnoyers &lt;mathieu.desnoyers@efficios.com&gt;
Cc: Douglas Raillard &lt;douglas.raillard@arm.com&gt;
Link: https://lore.kernel.org/20250323152151.528b5ced@batman.local.home
Fixes: 21581dd4e7ff ("tracing: Ensure module defining synth event cannot be unloaded while tracing")
Reported-by: kernel test robot &lt;lkp@intel.com&gt;
Closes: https://lore.kernel.org/oe-kbuild-all/202503232230.TeREVy8R-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
