linux-stable.git/kernel/trace, branch v3.16.83

blktrace: fix dereference after null check

2020-04-28T18:03:38+00:00

commit 153031a301bb07194e9c37466cfce8eacb977621 upstream.

There was a recent change in blktrace.c that added a RCU protection to
`q->blk_trace` in order to fix a use-after-free issue during access.

However the change missed an edge case that can lead to dereferencing of
`bt` pointer even when it's NULL:

Coverity static analyzer marked this as a FORWARD_NULL issue with CID
1460458.

```
/kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store()
1898            ret = 0;
1899            if (bt == NULL)
1900                    ret = blk_trace_setup_queue(q, bdev);
1901
1902            if (ret == 0) {
1903                    if (attr == &dev_attr_act_mask)
>>>     CID 1460458:  Null pointer dereferences  (FORWARD_NULL)
>>>     Dereferencing null pointer "bt".
1904                            bt->act_mask = value;
1905                    else if (attr == &dev_attr_pid)
1906                            bt->pid = value;
1907                    else if (attr == &dev_attr_start_lba)
1908                            bt->start_lba = value;
1909                    else if (attr == &dev_attr_end_lba)
```

Added a reassignment with RCU annotation to fix the issue.

Fixes: c780e86dd48 ("blktrace: Protect q->blk_trace with RCU")
Reviewed-by: Ming Lei 
Reviewed-by: Bob Liu 
Reviewed-by: Steven Rostedt (VMware) 
Signed-off-by: Cengiz Can 
Signed-off-by: Jens Axboe 
Signed-off-by: Ben Hutchings

blktrace: Protect q->blk_trace with RCU

2020-04-28T18:03:38+00:00

commit c780e86dd48ef6467a1146cf7d0fe1e05a635039 upstream.

KASAN is reporting that __blk_add_trace() has a use-after-free issue
when accessing q->blk_trace. Indeed the switching of block tracing (and
thus eventual freeing of q->blk_trace) is completely unsynchronized with
the currently running tracing and thus it can happen that the blk_trace
structure is being freed just while __blk_add_trace() works on it.
Protect accesses to q->blk_trace by RCU during tracing and make sure we
wait for the end of RCU grace period when shutting down tracing. Luckily
that is rare enough event that we can afford that. Note that postponing
the freeing of blk_trace to an RCU callback should better be avoided as
it could have unexpected user visible side-effects as debugfs files
would be still existing for a short while block tracing has been shut
down.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=205711
Reviewed-by: Chaitanya Kulkarni 
Reviewed-by: Ming Lei 
Tested-by: Ming Lei 
Reviewed-by: Bart Van Assche 
Reported-by: Tristan Madani 
Signed-off-by: Jan Kara 
Signed-off-by: Jens Axboe 
[bwh: Backported to 3.16:
 - Drop changes in blk_trace_note_message_enabled(), blk_trace_bio_get_cgid()
 - Adjust context]
Signed-off-by: Ben Hutchings

blktrace: re-write setting q->blk_trace

2020-04-28T18:03:37+00:00

commit cdea01b2bf98affb7e9c44530108a4a28535eee8 upstream.

This is really about simplifying the double xchg patterns into
a single cmpxchg, with the same logic. Other than the immediate
cleanup, there are some subtleties this change deals with:

(i) While the load of the old bt is fully ordered wrt everything,
ie:

        old_bt = xchg(&q->blk_trace, bt);             [barrier]
        if (old_bt)
	     (void) xchg(&q->blk_trace, old_bt);    [barrier]

blk_trace could still be changed between the xchg and the old_bt
load. Note that this description is merely theoretical and afaict
very small, but doing everything in a single context with cmpxchg
closes this potential race.

(ii) Ordering guarantees are obviously kept with cmpxchg.

(iii) Gets rid of the hacky-by-nature (void)xchg pattern.

Signed-off-by: Davidlohr Bueso 
eviewed-by: Jeff Moyer 
Signed-off-by: Jens Axboe 
Signed-off-by: Ben Hutchings

kernel/trace: Fix do not unregister tracepoints when register sched_migrate_task fail

2020-04-28T18:03:15+00:00

commit 50f9ad607ea891a9308e67b81f774c71736d1098 upstream.

In the function, if register_trace_sched_migrate_task() returns error,
sched_switch/sched_wakeup_new/sched_wakeup won't unregister. That is
why fail_deprobe_sched_switch was added.

Link: http://lkml.kernel.org/r/20191231133530.2794-1-pilgrimtao@gmail.com

Fixes: 478142c39c8c2 ("tracing: do not grab lock in wakeup latency function tracing")
Signed-off-by: Kaitao Cheng 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Ben Hutchings

ftrace: Avoid potential division by zero in function profiler

2020-04-28T18:03:14+00:00

commit e31f7939c1c27faa5d0e3f14519eaf7c89e8a69d upstream.

The ftrace_profile->counter is unsigned long and
do_div truncates it to 32 bits, which means it can test
non-zero and be truncated to zero for division.
Fix this issue by using div64_ul() instead.

Link: http://lkml.kernel.org/r/20200103030248.14516-1-wenyang@linux.alibaba.com

Fixes: e330b3bcd8319 ("tracing: Show sample std dev in function profiling")
Fixes: 34886c8bc590f ("tracing: add average time in function to function profiler")
Signed-off-by: Wen Yang 
Signed-off-by: Steven Rostedt (VMware) 
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings

tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not defined

2020-04-28T18:03:14+00:00

commit b8299d362d0837ae39e87e9019ebe6b736e0f035 upstream.

On some archs with some configurations, MCOUNT_INSN_SIZE is not defined, and
this makes the stack tracer fail to compile. Just define it to zero in this
case.

Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com

Fixes: 4df297129f622 ("tracing: Remove most or all of stack tracer stack size from stack_max_size")
Reported-by: kbuild test robot 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Ben Hutchings

tracing/uprobes: Fix output for multiple string arguments

2020-01-11T02:04:41+00:00

commit 0722069a5374b904ec1a67f91249f90e1cfae259 upstream.

When printing multiple uprobe arguments as strings the output for the
earlier arguments would also include all later string arguments.

This is best explained in an example:

Consider adding a uprobe to a function receiving two strings as
parameters which is at offset 0xa0 in strlib.so and we want to print
both parameters when the uprobe is hit (on x86_64):

$ echo 'p:func /lib/strlib.so:0xa0 +0(%di):string +0(%si):string' > \
    /sys/kernel/debug/tracing/uprobe_events

When the function is called as func("foo", "bar") and we hit the probe,
the trace file shows a line like the following:

  [...] func: (0x7f7e683706a0) arg1="foobar" arg2="bar"

Note the extra "bar" printed as part of arg1. This behaviour stacks up
for additional string arguments.

The strings are stored in a dynamically growing part of the uprobe
buffer by fetch_store_string() after copying them from userspace via
strncpy_from_user(). The return value of strncpy_from_user() is then
directly used as the required size for the string. However, this does
not take the terminating null byte into account as the documentation
for strncpy_from_user() cleary states that it "[...] returns the
length of the string (not including the trailing NUL)" even though the
null byte will be copied to the destination.

Therefore, subsequent calls to fetch_store_string() will overwrite
the terminating null byte of the most recently fetched string with
the first character of the current string, leading to the
"accumulation" of strings in earlier arguments in the output.

Fix this by incrementing the return value of strncpy_from_user() by
one if we did not hit the maximum buffer size.

Link: http://lkml.kernel.org/r/20190116141629.5752-1-andreas.ziegler@fau.de

Cc: Ingo Molnar 
Fixes: 5baaa59ef09e ("tracing/probes: Implement 'memory' fetch method for uprobes")
Acked-by: Masami Hiramatsu 
Signed-off-by: Andreas Ziegler 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Masami Hiramatsu 
Signed-off-by: Ben Hutchings

tracing: Get trace_array reference for available_tracers files

2019-12-19T15:58:27+00:00

commit 194c2c74f5532e62c218adeb8e2b683119503907 upstream.

As instances may have different tracers available, we need to look at the
trace_array descriptor that shows the list of the available tracers for the
instance. But there's a race between opening the file and an admin
deleting the instance. The trace_array_get() needs to be called before
accessing the trace_array.

Fixes: 607e2ea167e56 ("tracing: Set up infrastructure to allow tracers for instances")
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Ben Hutchings

tracing/snapshot: Resize spare buffer if size changed

2019-10-05T15:20:07+00:00

commit 46cc0b44428d0f0e81f11ea98217fc0edfbeab07 upstream.

Current snapshot implementation swaps two ring_buffers even though their
sizes are different from each other, that can cause an inconsistency
between the contents of buffer_size_kb file and the current buffer size.

For example:

  # cat buffer_size_kb
  7 (expanded: 1408)
  # echo 1 > events/enable
  # grep bytes per_cpu/cpu0/stats
  bytes: 1441020
  # echo 1 > snapshot             // current:1408, spare:1408
  # echo 123 > buffer_size_kb     // current:123,  spare:1408
  # echo 1 > snapshot             // current:1408, spare:123
  # grep bytes per_cpu/cpu0/stats
  bytes: 1443700
  # cat buffer_size_kb
  123                             // != current:1408

And also, a similar per-cpu case hits the following WARNING:

Reproducer:

  # echo 1 > per_cpu/cpu0/snapshot
  # echo 123 > buffer_size_kb
  # echo 1 > per_cpu/cpu0/snapshot

WARNING:

  WARNING: CPU: 0 PID: 1946 at kernel/trace/trace.c:1607 update_max_tr_single.part.0+0x2b8/0x380
  Modules linked in:
  CPU: 0 PID: 1946 Comm: bash Not tainted 5.2.0-rc6 #20
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
  RIP: 0010:update_max_tr_single.part.0+0x2b8/0x380
  Code: ff e8 dc da f9 ff 0f 0b e9 88 fe ff ff e8 d0 da f9 ff 44 89 ee bf f5 ff ff ff e8 33 dc f9 ff 41 83 fd f5 74 96 e8 b8 da f9 ff <0f> 0b eb 8d e8 af da f9 ff 0f 0b e9 bf fd ff ff e8 a3 da f9 ff 48
  RSP: 0018:ffff888063e4fca0 EFLAGS: 00010093
  RAX: ffff888066214380 RBX: ffffffff99850fe0 RCX: ffffffff964298a8
  RDX: 0000000000000000 RSI: 00000000fffffff5 RDI: 0000000000000005
  RBP: 1ffff1100c7c9f96 R08: ffff888066214380 R09: ffffed100c7c9f9b
  R10: ffffed100c7c9f9a R11: 0000000000000003 R12: 0000000000000000
  R13: 00000000ffffffea R14: ffff888066214380 R15: ffffffff99851060
  FS:  00007f9f8173c700(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000714dc0 CR3: 0000000066fa6000 CR4: 00000000000006f0
  Call Trace:
   ? trace_array_printk_buf+0x140/0x140
   ? __mutex_lock_slowpath+0x10/0x10
   tracing_snapshot_write+0x4c8/0x7f0
   ? trace_printk_init_buffers+0x60/0x60
   ? selinux_file_permission+0x3b/0x540
   ? tracer_preempt_off+0x38/0x506
   ? trace_printk_init_buffers+0x60/0x60
   __vfs_write+0x81/0x100
   vfs_write+0x1e1/0x560
   ksys_write+0x126/0x250
   ? __ia32_sys_read+0xb0/0xb0
   ? do_syscall_64+0x1f/0x390
   do_syscall_64+0xc1/0x390
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

This patch adds resize_buffer_duplicate_size() to check if there is a
difference between current/spare buffer sizes and resize a spare buffer
if necessary.

Link: http://lkml.kernel.org/r/20190625012910.13109-1-devel@etsukata.com

Fixes: ad909e21bbe69 ("tracing: Add internal tracing_snapshot() functions")
Signed-off-by: Eiichi Tsukata 
Signed-off-by: Steven Rostedt (VMware) 
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings

tracing: Fix partial reading of trace event's id file

2019-09-23T20:12:00+00:00

commit cbe08bcbbe787315c425dde284dcb715cfbf3f39 upstream.

When reading only part of the id file, the ppos isn't tracked correctly.
This is taken care by simple_read_from_buffer.

Reading a single byte, and then the next byte would result EOF.

While this seems like not a big deal, this breaks abstractions that
reads information from files unbuffered. See for example
https://github.com/golang/go/issues/29399

This code was mentioned as problematic in
commit cd458ba9d5a5
("tracing: Do not (ab)use trace_seq in event_id_read()")

An example C code that show this bug is:

  #include 
  #include 

  #include 
  #include 
  #include 
  #include 

  int main(int argc, char **argv) {
    if (argc < 2)
      return 1;
    int fd = open(argv[1], O_RDONLY);
    char c;
    read(fd, &c, 1);
    printf("First  %c\n", c);
    read(fd, &c, 1);
    printf("Second %c\n", c);
  }

Then run with, e.g.

  sudo ./a.out /sys/kernel/debug/tracing/events/tcp/tcp_set_state/id

You'll notice you're getting the first character twice, instead of the
first two characters in the id file.

Link: http://lkml.kernel.org/r/20181231115837.4932-1-elazar@lightbitslabs.com

Cc: Orit Wasserman 
Cc: Oleg Nesterov 
Cc: Ingo Molnar 
Fixes: 23725aeeab10b ("ftrace: provide an id file for each event")
Signed-off-by: Elazar Leibovich 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Ben Hutchings