[ Upstream commit 1ebe1eaf2f02784921759992ae1fde1a9bec8fd0 ]

Since enums do not get converted by the TRACE_EVENT macro into their values,
the event format displaces the enum name and not the value. This breaks
tools like perf and trace-cmd that need to interpret the raw binary data. To
solve this, an enum map was created to convert these enums into their actual
numbers on boot up. This is done by TRACE_EVENTS() adding a
TRACE_DEFINE_ENUM() macro.

Some enums were not being converted. This was caused by an optization that
had a bug in it.

All calls get checked against this enum map to see if it should be converted
or not, and it compares the call's system to the system that the enum map
was created under. If they match, then they call is processed.

To cut down on the number of iterations needed to find the maps with a
matching system, since calls and maps are grouped by system, when a match is
made, the index into the map array is saved, so that the next call, if it
belongs to the same system as the previous call, could start right at that
array index and not have to scan all the previous arrays.

The problem was, the saved index was used as the variable to know if this is
a call in a new system or not. If the index was zero, it was assumed that
the call is in a new system and would keep incrementing the saved index
until it found a matching system. The issue arises when the first matching
system was at index zero. The next map, if it belonged to the same system,
would then think it was the first match and increment the index to one. If
the next call belong to the same system, it would begin its search of the
maps off by one, and miss the first enum that should be converted. This left
a single enum not converted properly.

Also add a comment to describe exactly what that index was for. It took me a
bit too long to figure out what I was thinking when debugging this issue.

Link: http://lkml.kernel.org/r/717BE572-2070-4C1E-9902-9F2E0FEDA4F8@oracle.com

Cc: stable@vger.kernel.org
Fixes: 0c564a538aa93 ("tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Teste-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>

[ Upstream commit 854145e0a8e9a05f7366d240e2f99d9c1ca6d6dd ]

Currently register functions for events will be called
through the 'reg' field of event class directly without
any check when seting up triggers.

Triggers for events that don't support register through
debug fs (events under events/ftrace are for trace-cmd to
read event format, and most of them don't have a register
function except events/ftrace/functionx) can't be enabled
at all, and an oops will be hit when setting up trigger
for those events, so just not creating them is an easy way
to avoid the oops.

Link: http://lkml.kernel.org/r/1462275274-3911-1-git-send-email-chuhu@redhat.com

Cc: stable@vger.kernel.org # 3.14+
Fixes: 85f2b08268c01 ("tracing: Add basic event trigger framework")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

[ Upstream commit d045437a169f899dfb0f6f7ede24cc042543ced9 ]

The ftrace:function event is only displayed for parsing the function tracer
data. It is not used to enable function tracing, and does not include an
"enable" file in its event directory.

Originally, this event was kept separate from other events because it did
not have a ->reg parameter. But perf added a "reg" parameter for its use
which caused issues, because it made the event available to functions where
it was not compatible for.

Commit 9b63776fa3ca9 "tracing: Do not enable function event with enable"
added a TRACE_EVENT_FL_IGNORE_ENABLE flag that prevented the function event
from being enabled by normal trace events. But this commit missed keeping
the function event from being displayed by the "available_events" directory,
which is used to show what events can be enabled by set_event.

One documented way to enable all events is to:

 cat available_events > set_event

But because the function event is displayed in the available_events, this
now causes an INVALID error:

 cat: write error: Invalid argument

Reported-by: Chunyu Hu <chuhu@redhat.com>
Fixes: 9b63776fa3ca9 "tracing: Do not enable function event with enable"
Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

Pull fourth vfs update from Al Viro:
 "d_inode() annotations from David Howells (sat in for-next since before
  the beginning of merge window) + four assorted fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RCU pathwalk breakage when running into a symlink overmounting something
  fix I_DIO_WAKEUP definition
  direct-io: only inc/dec inode->i_dio_count for file systems
  fs/9p: fix readdir()
  VFS: assorted d_backing_inode() annotations
  VFS: fs/inode.c helpers: d_inode() annotations
  VFS: fs/cachefiles: d_backing_inode() annotations
  VFS: fs library helpers: d_inode() annotations
  VFS: assorted weird filesystems: d_inode() annotations
  VFS: normal filesystems (and lustre): d_inode() annotations
  VFS: security/: d_inode() annotations
  VFS: security/: d_backing_inode() annotations
  VFS: net/: d_inode() annotations
  VFS: net/unix: d_backing_inode() annotations
  VFS: kernel/: d_inode() annotations
  VFS: audit: d_backing_inode() annotations
  VFS: Fix up some ->d_inode accesses in the chelsio driver
  VFS: Cachefiles should perform fs modifications on the top layer only
  VFS: AF_UNIX sockets should call mknod on the top layer only

Pull tracing fixes from Steven Rostedt:
 "This adds three fixes for the tracing code.

  The first is a bug when ftrace_dump_on_oops is triggered in atomic
  context and function graph tracer is the tracer that is being
  reported.

  The second fix is bad parsing of the trace_events from the kernel
  command line, where it would ignore specific events if the system name
  is used with defining the event(it enables all events within the
  system).

  The last one is a fix to the TRACE_DEFINE_ENUM(), where a check was
  missing to see if the ptr was incremented to the end of the string,
  but the loop increments it again and can miss the nul delimiter to
  stop processing"

* tag 'trace-v4.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix possible out of bounds memory access when parsing enums
  tracing: Fix incorrect enabling of trace events by boot cmdline
  tracing: Handle ftrace_dump() atomic context in graph_trace_open()

The code that replaces the enum names with the enum values in the
tracepoints' format files could possible miss the end of string nul
character. This was caused by processing things like backslashes, quotes
and other tokens. After processing the tokens, a check for the nul
character needed to be done before continuing the loop, because the loop
incremented the pointer before doing the check, which could bypass the nul
character.

Link: http://lkml.kernel.org/r/552E661D.5060502@oracle.com

Reported-by: Sasha Levin <sasha.levin@oracle.com> # via KASan
Tested-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Fixes: 0c564a538aa9 "tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

There is a problem that trace events are not properly enabled with
boot cmdline. The problem is that if we pass "trace_event=kmem:mm_page_alloc"
to the boot cmdline, it enables all kmem trace events, and not just
the page_alloc event.

This is caused by the parsing mechanism. When we parse the cmdline, the buffer
contents is modified due to tokenization. And, if we use this buffer
again, we will get the wrong result.

Unfortunately, this buffer is be accessed three times to set trace events
properly at boot time. So, we need to handle this situation.

There is already code handling ",", but we need another for ":".
This patch adds it.

Link: http://lkml.kernel.org/r/1429159484-22977-1-git-send-email-iamjoonsoo.kim@lge.com

Cc: stable@vger.kernel.org # 3.19+
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
[ added missing return ret; ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

relayfs and tracefs are dealing with inodes of their own;
those two act as filesystem drivers

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull tracing updates from Steven Rostedt:
 "Some clean ups and small fixes, but the biggest change is the addition
  of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.

  Tracepoints have helper functions for the TP_printk() called
  __print_symbolic() and __print_flags() that lets a numeric number be
  displayed as a a human comprehensible text.  What is placed in the
  TP_printk() is also shown in the tracepoint format file such that user
  space tools like perf and trace-cmd can parse the binary data and
  express the values too.  Unfortunately, the way the TRACE_EVENT()
  macro works, anything placed in the TP_printk() will be shown pretty
  much exactly as is.  The problem arises when enums are used.  That's
  because unlike macros, enums will not be changed into their values by
  the C pre-processor.  Thus, the enum string is exported to the format
  file, and this makes it useless for user space tools.

  The TRACE_DEFINE_ENUM() solves this by converting the enum strings in
  the TP_printk() format into their number, and that is what is shown to
  user space.  For example, the tracepoint tlb_flush currently has this
  in its format file:

     __print_symbolic(REC->reason,
        { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
        { TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
        { TLB_LOCAL_SHOOTDOWN, "local shootdown" },
        { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })

  After adding:

     TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
     TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
     TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
     TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);

  Its format file will contain this:

     __print_symbolic(REC->reason,
        { 0, "flush on task switch" },
        { 1, "remote shootdown" },
        { 2, "local shootdown" },
        { 3, "local mm shootdown" })"

* tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
  tracing: Add enum_map file to show enums that have been mapped
  writeback: Export enums used by tracepoint to user space
  v4l: Export enums used by tracepoints to user space
  SUNRPC: Export enums in tracepoints to user space
  mm: tracing: Export enums in tracepoints to user space
  irq/tracing: Export enums in tracepoints to user space
  f2fs: Export the enums in the tracepoints to userspace
  net/9p/tracing: Export enums in tracepoints to userspace
  x86/tlb/trace: Export enums in used by tlb_flush tracepoint
  tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM()
  tracing: Allow for modules to convert their enums to values
  tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values
  tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation
  tracing: Give system name a pointer
  brcmsmac: Move each system tracepoints to their own header
  iwlwifi: Move each system tracepoints to their own header
  mac80211: Move message tracepoints to their own header
  tracing: Add TRACE_SYSTEM_VAR to xhci-hcd
  tracing: Add TRACE_SYSTEM_VAR to kvm-s390
  tracing: Add TRACE_SYSTEM_VAR to intel-sst
  ...

Update the infrastructure such that modules that declare TRACE_DEFINE_ENUM()
will have those enums converted into their values in the tracepoint
print fmt strings.

Link: http://lkml.kernel.org/r/87vbhjp74q.fsf@rustcorp.com.au

Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>