linux-stable.git/kernel/trace/trace.c, branch v5.8.16

tracing: Make the space reserved for the pid wider

2020-10-07T06:02:49+00:00

[ Upstream commit 795d6379a47bcbb88bd95a69920e4acc52849f88 ]

For 64bit CONFIG_BASE_SMALL=0 systems PID_MAX_LIMIT is set by default to
4194304. During boot the kernel sets a new value based on number of CPUs
but no lower than 32768. It is 1024 per CPU so with 128 CPUs the default
becomes 131072 which needs six digits.
This value can be increased during run time but must not exceed the
initial upper limit.

Systemd sometime after v241 sets it to the upper limit during boot. The
result is that when the pid exceeds five digits, the trace output is a
little hard to read because it is no longer properly padded (same like
on big iron with 98+ CPUs).

Increase the pid padding to seven digits.

Link: https://lkml.kernel.org/r/20200904082331.dcdkrr3bkn3e4qlg@linutronix.de

Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Sasha Levin

tracing: Fix trace_find_next_entry() accounting of temp buffer size

2020-10-07T06:02:46+00:00

commit 851e6f61cd076954f9d521e0d79b173ad3a2453b upstream.

The temp buffer size variable for trace_find_next_entry() was incorrectly
being updated when the size did not change. The temp buffer size should only
be updated when it is reallocated.

This is mostly an issue when used with ftrace_dump(). That's because
ftrace_dump() can not allocate a new buffer, and instead uses a temporary
buffer with a fix size. But the variable that keeps track of that size is
incorrectly updated with each call, and it could fall into the path that
would try to reallocate the buffer and produce a warning.

 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 1601 at kernel/trace/trace.c:3548
trace_find_next_entry+0xd0/0xe0
 Modules linked in [..]
 CPU: 1 PID: 1601 Comm: bash Not tainted 5.9.0-rc5-test+ #521
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03
07/14/2016
 RIP: 0010:trace_find_next_entry+0xd0/0xe0
 Code: 40 21 00 00 4c 89 e1 31 d2 4c 89 ee 48 89 df e8 c6 9e ff ff 89 ab 54
21 00 00 5b 5d 41 5c 41 5d c3 48 63 d5 eb bf 31 c0 eb f0 <0f> 0b 48 63 d5 eb
b4 66 0f 1f 84 00 00 00 00 00 53 48 8d 8f 60 21
 RSP: 0018:ffff95a4f2e8bd70 EFLAGS: 00010046
 RAX: ffffffff96679fc0 RBX: ffffffff97910de0 RCX: ffffffff96679fc0
 RDX: ffff95a4f2e8bd98 RSI: ffff95a4ee321098 RDI: ffffffff97913000
 RBP: 0000000000000018 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000046 R12: ffff95a4f2e8bd98
 R13: 0000000000000000 R14: ffff95a4ee321098 R15: 00000000009aa301
 FS:  00007f8565484740(0000) GS:ffff95a55aa40000(0000)
knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000055876bd43d90 CR3: 00000000b76e6003 CR4: 00000000001706e0
 Call Trace:
  trace_print_lat_context+0x58/0x2d0
  ? cpumask_next+0x16/0x20
  print_trace_line+0x1a4/0x4f0
  ftrace_dump.cold+0xad/0x12c
  __handle_sysrq.cold+0x51/0x126
  write_sysrq_trigger+0x3f/0x4a
  proc_reg_write+0x53/0x80
  vfs_write+0xca/0x210
  ksys_write+0x70/0xf0
  do_syscall_64+0x33/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f8565579487
 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa
64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff
77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
 RSP: 002b:00007ffd40707948 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f8565579487
 RDX: 0000000000000002 RSI: 000055876bd74de0 RDI: 0000000000000001
 RBP: 000055876bd74de0 R08: 000000000000000a R09: 0000000000000001
 R10: 000055876bdec280 R11: 0000000000000246 R12: 0000000000000002
 R13: 00007f856564a500 R14: 0000000000000002 R15: 00007f856564a700
 irq event stamp: 109958
 ---[ end trace 7aab5b7e51484b00 ]---

Not only fix the updating of the temp buffer, but also do not free the temp
buffer before a new buffer is allocated (there's no reason to not continue
to use the current temp buffer if an allocation fails).

Cc: stable@vger.kernel.org
Fixes: 8e99cf91b99bb ("tracing: Do not allocate buffer in trace_find_next_entry() in atomic")
Reported-by: Anna-Maria Behnsen 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

tracing: Move pipe reference to trace array instead of current_tracer

2020-08-19T06:26:29+00:00

[ Upstream commit 7ef282e05132d56b6f6b71e3873f317664bea78b ]

If a process has the trace_pipe open on a trace_array, the current tracer
for that trace array should not be changed. This was original enforced by a
global lock, but when instances were introduced, it was moved to the
current_trace. But this structure is shared by all instances, and a
trace_pipe is for a single instance. There's no reason that a process that
has trace_pipe open on one instance should prevent another instance from
changing its current tracer. Move the reference counter to the trace_array
instead.

This is marked as "Fixes" but is more of a clean up than a true fix.
Backport if you want, but its not critical.

Fixes: cf6ab6d9143b1 ("tracing: Add ref count to tracer for when they are being read by pipe")
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Sasha Levin

tracing: Remove unused event variable in tracing_iter_reset

2020-06-17T01:21:03+00:00

We do not use the event variable, just remove it.

Signed-off-by: YangHui 
Signed-off-by: Steven Rostedt (VMware)

Merge tag 'trace-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2020-06-09T17:06:18+00:00

Pull tracing updates from Steven Rostedt:
 "No new features this release. Mostly clean ups, restructuring and
  documentation.

   - Have ftrace_bug() show ftrace errors before the WARN, as the WARN
     will reboot the box before the error messages are printed if
     panic_on_warn is set.

   - Have traceoff_on_warn disable tracing sooner (before prints)

   - Write a message to the trace buffer that its being disabled when
     disable_trace_on_warning() is set.

   - Separate out synthetic events from histogram code to let it be used
     by other parts of the kernel.

   - More documentation on histogram design.

   - Other small fixes and clean ups"

* tag 'trace-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Remove obsolete PREEMPTIRQ_EVENTS kconfig option
  tracing/doc: Fix ascii-art in histogram-design.rst
  tracing: Add a trace print when traceoff_on_warning is triggered
  ftrace,bug: Improve traceoff_on_warn
  selftests/ftrace: Distinguish between hist and synthetic event checks
  tracing: Move synthetic events to a separate file
  tracing: Fix events.rst section numbering
  tracing/doc: Fix typos in histogram-design.rst
  tracing: Add hist_debug trace event files for histogram debugging
  tracing: Add histogram-design document
  tracing: Check state.disabled in synth event trace functions
  tracing/probe: reverse arguments to list_add
  tools/bootconfig: Add a summary of test cases and return error
  ftrace: show debugging information when panic_on_warn set

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-06-03T23:27:18+00:00

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

Merge branch 'work.splice' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2020-06-03T22:52:19+00:00

Pull splice updates from Al Viro:
 "Christoph's assorted splice cleanups"

* 'work.splice' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: rename pipe_buf ->steal to ->try_steal
  fs: make the pipe_buf_operations ->confirm operation optional
  fs: make the pipe_buf_operations ->steal operation optional
  trace: remove tracing_pipe_buf_ops
  pipe: merge anon_pipe_buf*_ops
  fs: simplify do_splice_from
  fs: simplify do_splice_to

mm: remove vmalloc_sync_(un)mappings()

2020-06-02T17:59:12+00:00

These functions are not needed anymore because the vmalloc and ioremap
mappings are now synchronized when they are created or torn down.

Remove all callers and function definitions.

Signed-off-by: Joerg Roedel 
Signed-off-by: Andrew Morton 
Tested-by: Steven Rostedt (VMware) 
Acked-by: Andy Lutomirski 
Acked-by: Peter Zijlstra (Intel) 
Cc: Arnd Bergmann 
Cc: Christoph Hellwig 
Cc: Dave Hansen 
Cc: "H . Peter Anvin" 
Cc: Ingo Molnar 
Cc: Matthew Wilcox (Oracle) 
Cc: Michal Hocko 
Cc: "Rafael J. Wysocki" 
Cc: Thomas Gleixner 
Cc: Vlastimil Babka 
Link: http://lkml.kernel.org/r/20200515140023.25469-7-joro@8bytes.org
Signed-off-by: Linus Torvalds

tracing: Add a trace print when traceoff_on_warning is triggered

2020-06-01T12:23:47+00:00

When "traceoff_on_warning" is enabled and a warning happens, there can still
be many trace events happening on other CPUs between the time the warning
occurred and the last trace event on that same CPU. This can cause confusion
in examining the trace, as it may not be obvious where the warning happened.
By adding a trace print into the trace just before disabling tracing, it
makes it obvious where the warning occurred, and the developer doesn't have
to look at other means to see what CPU it occurred on.

Cc: Peter Zijlstra 
Signed-off-by: Steven Rostedt (VMware)

fs: make the pipe_buf_operations ->confirm operation optional

2020-05-20T16:11:26+00:00

Just return 0 for success if it is not present.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Al Viro