linux-stable.git/kernel/trace/ftrace.c, branch v4.4.293 Linux kernel stable tree tracing: Have all levels of checks prevent recursion 2021-10-27T07:32:40+00:00 Steven Rostedt (VMware) rostedt@goodmis.org 2021-10-18T19:44:12+00:00 77bd0fb6e20472c02707439b2ecc2080a5fe5046 commit ed65df63a39a3f6ed04f7258de8b6789e5021c18 upstream. While writing an email explaining the "bit = 0" logic for a discussion on making ftrace_test_recursion_trylock() disable preemption, I discovered a path that makes the "not do the logic if bit is zero" unsafe. The recursion logic is done in hot paths like the function tracer. Thus, any code executed causes noticeable overhead. Thus, tricks are done to try to limit the amount of code executed. This included the recursion testing logic. Having recursion testing is important, as there are many paths that can end up in an infinite recursion cycle when tracing every function in the kernel. Thus protection is needed to prevent that from happening. Because it is OK to recurse due to different running context levels (e.g. an interrupt preempts a trace, and then a trace occurs in the interrupt handler), a set of bits are used to know which context one is in (normal, softirq, irq and NMI). If a recursion occurs in the same level, it is prevented*. Then there are infrastructure levels of recursion as well. When more than one callback is attached to the same function to trace, it calls a loop function to iterate over all the callbacks. Both the callbacks and the loop function have recursion protection. The callbacks use the "ftrace_test_recursion_trylock()" which has a "function" set of context bits to test, and the loop function calls the internal trace_test_and_set_recursion() directly, with an "internal" set of bits. If an architecture does not implement all the features supported by ftrace then the callbacks are never called directly, and the loop function is called instead, which will implement the features of ftrace. Since both the loop function and the callbacks do recursion protection, it was seemed unnecessary to do it in both locations. Thus, a trick was made to have the internal set of recursion bits at a more significant bit location than the function bits. Then, if any of the higher bits were set, the logic of the function bits could be skipped, as any new recursion would first have to go through the loop function. This is true for architectures that do not support all the ftrace features, because all functions being traced must first go through the loop function before going to the callbacks. But this is not true for architectures that support all the ftrace features. That's because the loop function could be called due to two callbacks attached to the same function, but then a recursion function inside the callback could be called that does not share any other callback, and it will be called directly. i.e. traced_function_1: [ more than one callback tracing it ] call loop_func loop_func: trace_recursion set internal bit call callback callback: trace_recursion [ skipped because internal bit is set, return 0 ] call traced_function_2 traced_function_2: [ only traced by above callback ] call callback callback: trace_recursion [ skipped because internal bit is set, return 0 ] call traced_function_2 [ wash, rinse, repeat, BOOM! out of shampoo! ] Thus, the "bit == 0 skip" trick is not safe, unless the loop function is call for all functions. Since we want to encourage architectures to implement all ftrace features, having them slow down due to this extra logic may encourage the maintainers to update to the latest ftrace features. And because this logic is only safe for them, remove it completely. [*] There is on layer of recursion that is allowed, and that is to allow for the transition between interrupt context (normal -> softirq -> irq -> NMI), because a trace may occur before the context update is visible to the trace recursion logic. Link: https://lore.kernel.org/all/609b565a-ed6e-a1da-f025-166691b5d994@linux.alibaba.com/ Link: https://lkml.kernel.org/r/20211018154412.09fcad3c@gandalf.local.home Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@hansenpartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Jisheng Zhang <jszhang@kernel.org> Cc: =?utf-8?b?546L6LSH?= <yun.wang@linux.alibaba.com> Cc: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit ed65df63a39a3f6ed04f7258de8b6789e5021c18 upstream.

While writing an email explaining the "bit = 0" logic for a discussion on
making ftrace_test_recursion_trylock() disable preemption, I discovered a
path that makes the "not do the logic if bit is zero" unsafe.

The recursion logic is done in hot paths like the function tracer. Thus,
any code executed causes noticeable overhead. Thus, tricks are done to try
to limit the amount of code executed. This included the recursion testing
logic.

Having recursion testing is important, as there are many paths that can
end up in an infinite recursion cycle when tracing every function in the
kernel. Thus protection is needed to prevent that from happening.

Because it is OK to recurse due to different running context levels (e.g.
an interrupt preempts a trace, and then a trace occurs in the interrupt
handler), a set of bits are used to know which context one is in (normal,
softirq, irq and NMI). If a recursion occurs in the same level, it is
prevented*.

Then there are infrastructure levels of recursion as well. When more than
one callback is attached to the same function to trace, it calls a loop
function to iterate over all the callbacks. Both the callbacks and the
loop function have recursion protection. The callbacks use the
"ftrace_test_recursion_trylock()" which has a "function" set of context
bits to test, and the loop function calls the internal
trace_test_and_set_recursion() directly, with an "internal" set of bits.

If an architecture does not implement all the features supported by ftrace
then the callbacks are never called directly, and the loop function is
called instead, which will implement the features of ftrace.

Since both the loop function and the callbacks do recursion protection, it
was seemed unnecessary to do it in both locations. Thus, a trick was made
to have the internal set of recursion bits at a more significant bit
location than the function bits. Then, if any of the higher bits were set,
the logic of the function bits could be skipped, as any new recursion
would first have to go through the loop function.

This is true for architectures that do not support all the ftrace
features, because all functions being traced must first go through the
loop function before going to the callbacks. But this is not true for
architectures that support all the ftrace features. That's because the
loop function could be called due to two callbacks attached to the same
function, but then a recursion function inside the callback could be
called that does not share any other callback, and it will be called
directly.

i.e.

 traced_function_1: [ more than one callback tracing it ]
   call loop_func

 loop_func:
   trace_recursion set internal bit
   call callback

 callback:
   trace_recursion [ skipped because internal bit is set, return 0 ]
   call traced_function_2

 traced_function_2: [ only traced by above callback ]
   call callback

 callback:
   trace_recursion [ skipped because internal bit is set, return 0 ]
   call traced_function_2

 [ wash, rinse, repeat, BOOM! out of shampoo! ]

Thus, the "bit == 0 skip" trick is not safe, unless the loop function is
call for all functions.

Since we want to encourage architectures to implement all ftrace features,
having them slow down due to this extra logic may encourage the
maintainers to update to the latest ftrace features. And because this
logic is only safe for them, remove it completely.

 [*] There is on layer of recursion that is allowed, and that is to allow
     for the transition between interrupt context (normal -> softirq ->
     irq -> NMI), because a trace may occur before the context update is
     visible to the trace recursion logic.

Link: https://lore.kernel.org/all/609b565a-ed6e-a1da-f025-166691b5d994@linux.alibaba.com/
Link: https://lkml.kernel.org/r/20211018154412.09fcad3c@gandalf.local.home

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@hansenpartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jisheng Zhang <jszhang@kernel.org>
Cc: =?utf-8?b?546L6LSH?= <yun.wang@linux.alibaba.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ftrace: Do not blindly read the ip address in ftrace_bug() 2021-06-16T09:34:54+00:00 Steven Rostedt (VMware) rostedt@goodmis.org 2021-06-08T01:39:08+00:00 0bc62e398bbd9e600959e610def5109957437b28 commit 6c14133d2d3f768e0a35128faac8aa6ed4815051 upstream. It was reported that a bug on arm64 caused a bad ip address to be used for updating into a nop in ftrace_init(), but the error path (rightfully) returned -EINVAL and not -EFAULT, as the bug caused more than one error to occur. But because -EINVAL was returned, the ftrace_bug() tried to report what was at the location of the ip address, and read it directly. This caused the machine to panic, as the ip was not pointing to a valid memory address. Instead, read the ip address with copy_from_kernel_nofault() to safely access the memory, and if it faults, report that the address faulted, otherwise report what was in that location. Link: https://lore.kernel.org/lkml/20210607032329.28671-1-mark-pk.tsai@mediatek.com/ Cc: stable@vger.kernel.org Fixes: 05736a427f7e1 ("ftrace: warn on failure to disable mcount callers") Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 6c14133d2d3f768e0a35128faac8aa6ed4815051 upstream.

It was reported that a bug on arm64 caused a bad ip address to be used for
updating into a nop in ftrace_init(), but the error path (rightfully)
returned -EINVAL and not -EFAULT, as the bug caused more than one error to
occur. But because -EINVAL was returned, the ftrace_bug() tried to report
what was at the location of the ip address, and read it directly. This
caused the machine to panic, as the ip was not pointing to a valid memory
address.

Instead, read the ip address with copy_from_kernel_nofault() to safely
access the memory, and if it faults, report that the address faulted,
otherwise report what was in that location.

Link: https://lore.kernel.org/lkml/20210607032329.28671-1-mark-pk.tsai@mediatek.com/

Cc: stable@vger.kernel.org
Fixes: 05736a427f7e1 ("ftrace: warn on failure to disable mcount callers")
Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ftrace: Handle commands when closing set_ftrace_filter file 2021-05-22T08:38:19+00:00 Steven Rostedt (VMware) rostedt@goodmis.org 2021-05-05T14:38:24+00:00 24cd31752f47699b89b4b3471155c8e599a1a23a commit 8c9af478c06bb1ab1422f90d8ecbc53defd44bc3 upstream. # echo switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter will cause switch_mm to stop tracing by the traceoff command. # echo -n switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter does nothing. The reason is that the parsing in the write function only processes commands if it finished parsing (there is white space written after the command). That's to handle: write(fd, "switch_mm:", 10); write(fd, "traceoff", 8); cases, where the command is broken over multiple writes. The problem is if the file descriptor is closed, then the write call is not processed, and the command needs to be processed in the release code. The release code can handle matching of functions, but does not handle commands. Cc: stable@vger.kernel.org Fixes: eda1e32855656 ("tracing: handle broken names in ftrace filter") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 8c9af478c06bb1ab1422f90d8ecbc53defd44bc3 upstream.

 # echo switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter

will cause switch_mm to stop tracing by the traceoff command.

 # echo -n switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter

does nothing.

The reason is that the parsing in the write function only processes
commands if it finished parsing (there is white space written after the
command). That's to handle:

 write(fd, "switch_mm:", 10);
 write(fd, "traceoff", 8);

cases, where the command is broken over multiple writes.

The problem is if the file descriptor is closed, then the write call is
not processed, and the command needs to be processed in the release code.
The release code can handle matching of functions, but does not handle
commands.

Cc: stable@vger.kernel.org
Fixes: eda1e32855656 ("tracing: handle broken names in ftrace filter")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fgraph: Initialize tracing_graph_pause at task creation 2021-02-23T12:58:12+00:00 Steven Rostedt (VMware) rostedt@goodmis.org 2021-01-29T15:13:53+00:00 67776ca342399b60c8abef63e3962c1138bc284d commit 7e0a9220467dbcfdc5bc62825724f3e52e50ab31 upstream. On some archs, the idle task can call into cpu_suspend(). The cpu_suspend() will disable or pause function graph tracing, as there's some paths in bringing down the CPU that can have issues with its return address being modified. The task_struct structure has a "tracing_graph_pause" atomic counter, that when set to something other than zero, the function graph tracer will not modify the return address. The problem is that the tracing_graph_pause counter is initialized when the function graph tracer is enabled. This can corrupt the counter for the idle task if it is suspended in these architectures. CPU 1 CPU 2 ----- ----- do_idle() cpu_suspend() pause_graph_tracing() task_struct->tracing_graph_pause++ (0 -> 1) start_graph_tracing() for_each_online_cpu(cpu) { ftrace_graph_init_idle_task(cpu) task-struct->tracing_graph_pause = 0 (1 -> 0) unpause_graph_tracing() task_struct->tracing_graph_pause-- (0 -> -1) The above should have gone from 1 to zero, and enabled function graph tracing again. But instead, it is set to -1, which keeps it disabled. There's no reason that the field tracing_graph_pause on the task_struct can not be initialized at boot up. Cc: stable@vger.kernel.org Fixes: 380c4b1411ccd ("tracing/function-graph-tracer: append the tracing_graph_flag") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211339 Reported-by: pierre.gondois@arm.com Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7e0a9220467dbcfdc5bc62825724f3e52e50ab31 upstream.

On some archs, the idle task can call into cpu_suspend(). The cpu_suspend()
will disable or pause function graph tracing, as there's some paths in
bringing down the CPU that can have issues with its return address being
modified. The task_struct structure has a "tracing_graph_pause" atomic
counter, that when set to something other than zero, the function graph
tracer will not modify the return address.

The problem is that the tracing_graph_pause counter is initialized when the
function graph tracer is enabled. This can corrupt the counter for the idle
task if it is suspended in these architectures.

   CPU 1				CPU 2
   -----				-----
  do_idle()
    cpu_suspend()
      pause_graph_tracing()
          task_struct->tracing_graph_pause++ (0 -> 1)

				start_graph_tracing()
				  for_each_online_cpu(cpu) {
				    ftrace_graph_init_idle_task(cpu)
				      task-struct->tracing_graph_pause = 0 (1 -> 0)

      unpause_graph_tracing()
          task_struct->tracing_graph_pause-- (0 -> -1)

The above should have gone from 1 to zero, and enabled function graph
tracing again. But instead, it is set to -1, which keeps it disabled.

There's no reason that the field tracing_graph_pause on the task_struct can
not be initialized at boot up.

Cc: stable@vger.kernel.org
Fixes: 380c4b1411ccd ("tracing/function-graph-tracer: append the tracing_graph_flag")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211339
Reported-by: pierre.gondois@arm.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ftrace: Setup correct FTRACE_FL_REGS flags for module 2020-10-01T09:11:49+00:00 Chengming Zhou zhouchengming@bytedance.com 2020-07-28T18:05:53+00:00 2d81575a4bda48981dec3d51509569fc9ae67044 [ Upstream commit 8a224ffb3f52b0027f6b7279854c71a31c48fc97 ] When module loaded and enabled, we will use __ftrace_replace_code for module if any ftrace_ops referenced it found. But we will get wrong ftrace_addr for module rec in ftrace_get_addr_new, because rec->flags has not been setup correctly. It can cause the callback function of a ftrace_ops has FTRACE_OPS_FL_SAVE_REGS to be called with pt_regs set to NULL. So setup correct FTRACE_FL_REGS flags for rec when we call referenced_filters to find ftrace_ops references it. Link: https://lkml.kernel.org/r/20200728180554.65203-1-zhouchengming@bytedance.com Cc: stable@vger.kernel.org Fixes: 8c4f3c3fa9681 ("ftrace: Check module functions being traced on reload") Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 8a224ffb3f52b0027f6b7279854c71a31c48fc97 ]

When module loaded and enabled, we will use __ftrace_replace_code
for module if any ftrace_ops referenced it found. But we will get
wrong ftrace_addr for module rec in ftrace_get_addr_new, because
rec->flags has not been setup correctly. It can cause the callback
function of a ftrace_ops has FTRACE_OPS_FL_SAVE_REGS to be called
with pt_regs set to NULL.
So setup correct FTRACE_FL_REGS flags for rec when we call
referenced_filters to find ftrace_ops references it.

Link: https://lkml.kernel.org/r/20200728180554.65203-1-zhouchengming@bytedance.com

Cc: stable@vger.kernel.org
Fixes: 8c4f3c3fa9681 ("ftrace: Check module functions being traced on reload")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ftrace: Avoid potential division by zero in function profiler 2020-01-12T10:22:43+00:00 Wen Yang wenyang@linux.alibaba.com 2020-01-03T03:02:48+00:00 015f0fd0fcc338513f80044add27fa46cf71d217 commit e31f7939c1c27faa5d0e3f14519eaf7c89e8a69d upstream. The ftrace_profile->counter is unsigned long and do_div truncates it to 32 bits, which means it can test non-zero and be truncated to zero for division. Fix this issue by using div64_ul() instead. Link: http://lkml.kernel.org/r/20200103030248.14516-1-wenyang@linux.alibaba.com Cc: stable@vger.kernel.org Fixes: e330b3bcd8319 ("tracing: Show sample std dev in function profiling") Fixes: 34886c8bc590f ("tracing: add average time in function to function profiler") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e31f7939c1c27faa5d0e3f14519eaf7c89e8a69d upstream.

The ftrace_profile->counter is unsigned long and
do_div truncates it to 32 bits, which means it can test
non-zero and be truncated to zero for division.
Fix this issue by using div64_ul() instead.

Link: http://lkml.kernel.org/r/20200103030248.14516-1-wenyang@linux.alibaba.com

Cc: stable@vger.kernel.org
Fixes: e330b3bcd8319 ("tracing: Show sample std dev in function profiling")
Fixes: 34886c8bc590f ("tracing: add average time in function to function profiler")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kprobes: Mark ftrace mcount handler functions nokprobe 2019-04-27T07:34:02+00:00 Masami Hiramatsu mhiramat@kernel.org 2019-02-23T16:50:20+00:00 abb5b93fe0f54695d6f7ef2f38610835cd12981c commit fabe38ab6b2bd9418350284c63825f13b8a6abba upstream. Mark ftrace mcount handler functions nokprobe since probing on these functions with kretprobe pushes return address incorrectly on kretprobe shadow stack. Reported-by: Francis Deslauriers <francis.deslauriers@efficios.com> Tested-by: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/155094062044.6137.6419622920568680640.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fabe38ab6b2bd9418350284c63825f13b8a6abba upstream.

Mark ftrace mcount handler functions nokprobe since
probing on these functions with kretprobe pushes
return address incorrectly on kretprobe shadow stack.

Reported-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Tested-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/155094062044.6137.6419622920568680640.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tracing: Fix memory leak of instance function hash filters 2018-12-21T13:09:51+00:00 Steven Rostedt (VMware) rostedt@goodmis.org 2018-12-11T04:58:01+00:00 f2e7e67e459394faf1c56f1391c0e6dd4bd9e2f0 commit 2840f84f74035e5a535959d5f17269c69fa6edc5 upstream. The following commands will cause a memory leak: # cd /sys/kernel/tracing # mkdir instances/foo # echo schedule > instance/foo/set_ftrace_filter # rmdir instances/foo The reason is that the hashes that hold the filters to set_ftrace_filter and set_ftrace_notrace are not freed if they contain any data on the instance and the instance is removed. Found by kmemleak detector. Cc: stable@vger.kernel.org Fixes: 591dffdade9f ("ftrace: Allow for function tracing instance to filter functions") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2840f84f74035e5a535959d5f17269c69fa6edc5 upstream.

The following commands will cause a memory leak:

 # cd /sys/kernel/tracing
 # mkdir instances/foo
 # echo schedule > instance/foo/set_ftrace_filter
 # rmdir instances/foo

The reason is that the hashes that hold the filters to set_ftrace_filter and
set_ftrace_notrace are not freed if they contain any data on the instance
and the instance is removed.

Found by kmemleak detector.

Cc: stable@vger.kernel.org
Fixes: 591dffdade9f ("ftrace: Allow for function tracing instance to filter functions")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ftrace: Remove incorrect setting of glob search field 2018-02-16T19:09:47+00:00 Steven Rostedt (VMware) rostedt@goodmis.org 2018-02-06T03:05:31+00:00 a94d7722b39206e96e639cd5cf2cf037c69d5ce8 commit 7b6586562708d2b3a04fe49f217ddbadbbbb0546 upstream. __unregister_ftrace_function_probe() will incorrectly parse the glob filter because it resets the search variable that was setup by filter_parse_regex(). Al Viro reported this: After that call of filter_parse_regex() we could have func_g.search not equal to glob only if glob started with '!' or '*'. In the former case we would've buggered off with -EINVAL (not = 1). In the latter we would've set func_g.search equal to glob + 1, calculated the length of that thing in func_g.len and proceeded to reset func_g.search back to glob. Suppose the glob is e.g. *foo*. We end up with func_g.type = MATCH_MIDDLE_ONLY; func_g.len = 3; func_g.search = "*foo"; Feeding that to ftrace_match_record() will not do anything sane - we will be looking for names containing "*foo" (->len is ignored for that one). Link: http://lkml.kernel.org/r/20180127031706.GE13338@ZenIV.linux.org.uk Fixes: 3ba009297149f ("ftrace: Introduce ftrace_glob structure") Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 7b6586562708d2b3a04fe49f217ddbadbbbb0546 upstream.

__unregister_ftrace_function_probe() will incorrectly parse the glob filter
because it resets the search variable that was setup by filter_parse_regex().

Al Viro reported this:

    After that call of filter_parse_regex() we could have func_g.search not
    equal to glob only if glob started with '!' or '*'.  In the former case
    we would've buggered off with -EINVAL (not = 1).  In the latter we
    would've set func_g.search equal to glob + 1, calculated the length of
    that thing in func_g.len and proceeded to reset func_g.search back to
    glob.

    Suppose the glob is e.g. *foo*.  We end up with
	    func_g.type = MATCH_MIDDLE_ONLY;
	    func_g.len = 3;
	    func_g.search = "*foo";
    Feeding that to ftrace_match_record() will not do anything sane - we
    will be looking for names containing "*foo" (->len is ignored for that
    one).

Link: http://lkml.kernel.org/r/20180127031706.GE13338@ZenIV.linux.org.uk

Fixes: 3ba009297149f ("ftrace: Introduce ftrace_glob structure")
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ftrace: Fix kmemleak in unregister_ftrace_graph 2017-10-12T09:27:33+00:00 Shu Wang shuwang@redhat.com 2017-09-12T02:14:54+00:00 87509592ecc3a31dbfd669bb49d53e33cb6b6304 commit 2b0b8499ae75df91455bbeb7491d45affc384fb0 upstream. The trampoline allocated by function tracer was overwriten by function_graph tracer, and caused a memory leak. The save_global_trampoline should have saved the previous trampoline in register_ftrace_graph() and restored it in unregister_ftrace_graph(). But as it is implemented, save_global_trampoline was only used in unregister_ftrace_graph as default value 0, and it overwrote the previous trampoline's value. Causing the previous allocated trampoline to be lost. kmmeleak backtrace: kmemleak_vmalloc+0x77/0xc0 __vmalloc_node_range+0x1b5/0x2c0 module_alloc+0x7c/0xd0 arch_ftrace_update_trampoline+0xb5/0x290 ftrace_startup+0x78/0x210 register_ftrace_function+0x8b/0xd0 function_trace_init+0x4f/0x80 tracing_set_tracer+0xe6/0x170 tracing_set_trace_write+0x90/0xd0 __vfs_write+0x37/0x170 vfs_write+0xb2/0x1b0 SyS_write+0x55/0xc0 do_syscall_64+0x67/0x180 return_from_SYSCALL_64+0x0/0x6a [ Looking further into this, I found that this was left over from when the function and function graph tracers shared the same ftrace_ops. But in commit 5f151b2401 ("ftrace: Fix function_profiler and function tracer together"), the two were separated, and the save_global_trampoline no longer was necessary (and it may have been broken back then too). -- Steven Rostedt ] Link: http://lkml.kernel.org/r/20170912021454.5976-1-shuwang@redhat.com Fixes: 5f151b2401 ("ftrace: Fix function_profiler and function tracer together") Signed-off-by: Shu Wang <shuwang@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2b0b8499ae75df91455bbeb7491d45affc384fb0 upstream.

The trampoline allocated by function tracer was overwriten by function_graph
tracer, and caused a memory leak. The save_global_trampoline should have
saved the previous trampoline in register_ftrace_graph() and restored it in
unregister_ftrace_graph(). But as it is implemented, save_global_trampoline was
only used in unregister_ftrace_graph as default value 0, and it overwrote the
previous trampoline's value. Causing the previous allocated trampoline to be
lost.

kmmeleak backtrace:
    kmemleak_vmalloc+0x77/0xc0
    __vmalloc_node_range+0x1b5/0x2c0
    module_alloc+0x7c/0xd0
    arch_ftrace_update_trampoline+0xb5/0x290
    ftrace_startup+0x78/0x210
    register_ftrace_function+0x8b/0xd0
    function_trace_init+0x4f/0x80
    tracing_set_tracer+0xe6/0x170
    tracing_set_trace_write+0x90/0xd0
    __vfs_write+0x37/0x170
    vfs_write+0xb2/0x1b0
    SyS_write+0x55/0xc0
    do_syscall_64+0x67/0x180
    return_from_SYSCALL_64+0x0/0x6a

[
  Looking further into this, I found that this was left over from when the
  function and function graph tracers shared the same ftrace_ops. But in
  commit 5f151b2401 ("ftrace: Fix function_profiler and function tracer
  together"), the two were separated, and the save_global_trampoline no
  longer was necessary (and it may have been broken back then too).
  -- Steven Rostedt
]

Link: http://lkml.kernel.org/r/20170912021454.5976-1-shuwang@redhat.com

Fixes: 5f151b2401 ("ftrace: Fix function_profiler and function tracer together")
Signed-off-by: Shu Wang <shuwang@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>