linux-stable.git/kernel/trace/ftrace.c, branch v4.16.2

ftrace: Remove incorrect setting of glob search field

2018-02-08T15:11:11+00:00

__unregister_ftrace_function_probe() will incorrectly parse the glob filter
because it resets the search variable that was setup by filter_parse_regex().

Al Viro reported this:

    After that call of filter_parse_regex() we could have func_g.search not
    equal to glob only if glob started with '!' or '*'.  In the former case
    we would've buggered off with -EINVAL (not = 1).  In the latter we
    would've set func_g.search equal to glob + 1, calculated the length of
    that thing in func_g.len and proceeded to reset func_g.search back to
    glob.

    Suppose the glob is e.g. *foo*.  We end up with
	    func_g.type = MATCH_MIDDLE_ONLY;
	    func_g.len = 3;
	    func_g.search = "*foo";
    Feeding that to ftrace_match_record() will not do anything sane - we
    will be looking for names containing "*foo" (->len is ignored for that
    one).

Link: http://lkml.kernel.org/r/20180127031706.GE13338@ZenIV.linux.org.uk

Cc: stable@vger.kernel.org
Fixes: 3ba009297149f ("ftrace: Introduce ftrace_glob structure")
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reviewed-by: Masami Hiramatsu 
Reported-by: Al Viro 
Signed-off-by: Steven Rostedt (VMware)

tracing: Make sure the parsed string always terminates with '\0'

2018-01-23T20:57:28+00:00

Always mark the parsed string with a terminated nul '\0' character. This removes
the need for the users to have to append the '\0' before using the parsed string.

Link: http://lkml.kernel.org/r/1516093350-12045-4-git-send-email-changbin.du@intel.com

Acked-by: Namhyung Kim 
Signed-off-by: Changbin Du 
Signed-off-by: Steven Rostedt (VMware)

ftrace, orc, x86: Handle ftrace dynamically allocated trampolines

2018-01-23T20:56:55+00:00

The function tracer can create a dynamically allocated trampoline that is
called by the function mcount or fentry hook that is used to call the
function callback that is registered. The problem is that the orc undwinder
will bail if it encounters one of these trampolines. This breaks the stack
trace of function callbacks, which include the stack tracer and setting the
stack trace for individual functions.

Since these dynamic trampolines are basically copies of the static ftrace
trampolines defined in ftrace_*.S, we do not need to create new orc entries
for the dynamic trampolines. Finding the return address on the stack will be
identical as the functions that were copied to create the dynamic
trampolines. When encountering a ftrace dynamic trampoline, we can just use
the orc entry of the ftrace static function that was copied for that
trampoline.

Signed-off-by: Steven Rostedt (VMware)

Merge tag 'trace-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2017-11-17T22:58:01+00:00

Pull tracing updates from

 - allow module init functions to be traced

 - clean up some unused or not used by config events (saves space)

 - clean up of trace histogram code

 - add support for preempt and interrupt enabled/disable events

 - other various clean ups

* tag 'trace-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (30 commits)
  tracing, thermal: Hide cpu cooling trace events when not in use
  tracing, thermal: Hide devfreq trace events when not in use
  ftrace: Kill FTRACE_OPS_FL_PER_CPU
  perf/ftrace: Small cleanup
  perf/ftrace: Fix function trace events
  perf/ftrace: Revert ("perf/ftrace: Fix double traces of perf on ftrace:function")
  tracing, dma-buf: Remove unused trace event dma_fence_annotate_wait_on
  tracing, memcg, vmscan: Hide trace events when not in use
  tracing/xen: Hide events that are not used when X86_PAE is not defined
  tracing: mark trace_test_buffer as __maybe_unused
  printk: Remove superfluous memory barriers from printk_safe
  ftrace: Clear hashes of stale ips of init memory
  tracing: Add support for preempt and irq enable/disable events
  tracing: Prepare to add preempt and irq trace events
  ftrace/kallsyms: Have /proc/kallsyms show saved mod init functions
  ftrace: Add freeing algorithm to free ftrace_mod_maps
  ftrace: Save module init functions kallsyms symbols for tracing
  ftrace: Allow module init functions to be traced
  ftrace: Add a ftrace_free_mem() function for modules to use
  tracing: Reimplement log2
  ...

ftrace: Kill FTRACE_OPS_FL_PER_CPU

2017-10-16T22:13:38+00:00

The one and only user of FTRACE_OPS_FL_PER_CPU is gone, remove the
lot.

Link: http://lkml.kernel.org/r/20171011080224.372422809@infradead.org

Signed-off-by: Peter Zijlstra (Intel) 
Signed-off-by: Steven Rostedt (VMware)

ftrace: Clear hashes of stale ips of init memory

2017-10-10T22:59:16+00:00

Filters should be cleared of init functions during freeing of init
memory when the ftrace dyn records are released. However in current
code, the filters are left as is. This patch clears the hashes of the
saved init functions when the init memory is freed. This fixes the
following issue reproducible with the following sequence of commands for
a test module:
================================================

void bar(void)
{
    printk(KERN_INFO "bar!\n");
}

void foo(void)
{
    printk(KERN_INFO "foo!\n");
    bar();
}

static int __init hello_init(void)
{
    printk(KERN_INFO "Hello world!\n");
    foo();
    return 0;
}

static void __exit hello_cleanup(void)
{
    printk(KERN_INFO "Cleaning up module.\n");
}

module_init(hello_init);
module_exit(hello_cleanup);
================================================

Commands:
echo '*:mod:test' > /d/tracing/set_ftrace_filter
echo function > /d/tracing/current_tracer
modprobe test
rmmod test
sleep 1
modprobe test
cat /d/tracing/set_ftrace_filter

Behavior without patch: Init function is still in the filter
Expected behavior: Shouldn't have any of the filters set

Link: http://lkml.kernel.org/r/20171009192931.56401-1-joelaf@google.com

Signed-off-by: Joel Fernandes 
Signed-off-by: Steven Rostedt (VMware)

ftrace/kallsyms: Have /proc/kallsyms show saved mod init functions

2017-10-06T03:10:42+00:00

If a module is loaded while tracing is enabled, then there's a possibility
that the module init functions were traced. These functions have their name
and address stored by ftrace such that it can translate the function address
that is written into the buffer into a human readable function name.

As userspace tools may be doing the same, they need a way to map function
names to their address as well. This is done through reading /proc/kallsyms.

Signed-off-by: Steven Rostedt (VMware)

ftrace: Add freeing algorithm to free ftrace_mod_maps

2017-10-05T21:57:34+00:00

The ftrace_mod_map is a descriptor to save module init function names in
case they were traced, and the trace output needs to reference the function
name from the function address. But after the function is unloaded, it
the maps should be freed, as the rest of the function names are as well.

Signed-off-by: Steven Rostedt (VMware)

ftrace: Save module init functions kallsyms symbols for tracing

2017-10-05T21:57:33+00:00

If function tracing is active when the module init functions are freed, then
store them to be referenced by kallsyms. As module init functions can now be
traced on module load, they were useless:

 ># echo ':mod:snd_seq' > set_ftrace_filter
 ># echo function > current_tracer
 ># modprobe snd_seq
 ># cat trace
 # tracer: function
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
         modprobe-2786  [000] ....  3189.037874: 0xffffffffa0860000 <-do_one_initcall
         modprobe-2786  [000] ....  3189.037876: 0xffffffffa086004d <-0xffffffffa086000f
         modprobe-2786  [000] ....  3189.037876: 0xffffffffa086010d <-0xffffffffa0860018
         modprobe-2786  [000] ....  3189.037877: 0xffffffffa086011a <-0xffffffffa0860021
         modprobe-2786  [000] ....  3189.037877: 0xffffffffa0860080 <-0xffffffffa086002a
         modprobe-2786  [000] ....  3189.039523: 0xffffffffa0860400 <-0xffffffffa0860033
         modprobe-2786  [000] ....  3189.039523: 0xffffffffa086038a <-0xffffffffa086041c
         modprobe-2786  [000] ....  3189.039591: 0xffffffffa086038a <-0xffffffffa0860436
         modprobe-2786  [000] ....  3189.039657: 0xffffffffa086038a <-0xffffffffa0860450
         modprobe-2786  [000] ....  3189.039719: 0xffffffffa0860127 <-0xffffffffa086003c
         modprobe-2786  [000] ....  3189.039742: snd_seq_create_kernel_client <-0xffffffffa08601f6

When the output is shown, the kallsyms for the module init functions have
already been freed, and the output of the trace can not convert them to
their function names.

Now this looks like this:

 # tracer: function
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
         modprobe-2463  [002] ....   174.243237: alsa_seq_init <-do_one_initcall
         modprobe-2463  [002] ....   174.243239: client_init_data <-alsa_seq_init
         modprobe-2463  [002] ....   174.243240: snd_sequencer_memory_init <-alsa_seq_init
         modprobe-2463  [002] ....   174.243240: snd_seq_queues_init <-alsa_seq_init
         modprobe-2463  [002] ....   174.243240: snd_sequencer_device_init <-alsa_seq_init
         modprobe-2463  [002] ....   174.244860: snd_seq_info_init <-alsa_seq_init
         modprobe-2463  [002] ....   174.244861: create_info_entry <-snd_seq_info_init
         modprobe-2463  [002] ....   174.244936: create_info_entry <-snd_seq_info_init
         modprobe-2463  [002] ....   174.245003: create_info_entry <-snd_seq_info_init
         modprobe-2463  [002] ....   174.245072: snd_seq_system_client_init <-alsa_seq_init
         modprobe-2463  [002] ....   174.245094: snd_seq_create_kernel_client <-snd_seq_system_client_init

Signed-off-by: Steven Rostedt (VMware)

ftrace: Allow module init functions to be traced

2017-10-05T21:57:30+00:00

Allow for module init sections to be traced as well as core kernel init
sections. Now that filtering modules functions can be stored, for when they
are loaded, it makes sense to be able to trace them.

Cc: Jessica Yu 
Cc: Rusty Russell 
Signed-off-by: Steven Rostedt (VMware)