linux-stable.git/kernel/trace/blktrace.c, branch v3.2.99

blktrace: fix unlocked access to init/start-stop/teardown

2018-02-13T18:32:15+00:00

commit 1f2cac107c591c24b60b115d6050adc213d10fc0 upstream.

sg.c calls into the blktrace functions without holding the proper queue
mutex for doing setup, start/stop, or teardown.

Add internal unlocked variants, and export the ones that do the proper
locking.

Fixes: 6da127ad0918 ("blktrace: Add blktrace ioctls to SCSI generic devices")
Tested-by: Dmitry Vyukov 
Signed-off-by: Jens Axboe 
Signed-off-by: Ben Hutchings

blktrace: Fix potential deadlock between delete & sysfs ops

2018-02-13T18:32:15+00:00

commit 5acb3cc2c2e9d3020a4fee43763c6463767f1572 upstream.

The lockdep code had reported the following unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(s_active#228);
                               lock(&bdev->bd_mutex/1);
                               lock(s_active#228);
  lock(&bdev->bd_mutex);

 *** DEADLOCK ***

The deadlock may happen when one task (CPU1) is trying to delete a
partition in a block device and another task (CPU0) is accessing
tracing sysfs file (e.g. /sys/block/dm-1/trace/act_mask) in that
partition.

The s_active isn't an actual lock. It is a reference count (kn->count)
on the sysfs (kernfs) file. Removal of a sysfs file, however, require
a wait until all the references are gone. The reference count is
treated like a rwsem using lockdep instrumentation code.

The fact that a thread is in the sysfs callback method or in the
ioctl call means there is a reference to the opended sysfs or device
file. That should prevent the underlying block structure from being
removed.

Instead of using bd_mutex in the block_device structure, a new
blk_trace_mutex is now added to the request_queue structure to protect
access to the blk_trace structure.

Suggested-by: Christoph Hellwig 
Signed-off-by: Waiman Long 
Acked-by: Steven Rostedt (VMware) 

Fix typo in patch subject line, and prune a comment detailing how
the code used to work.

Signed-off-by: Jens Axboe 
Signed-off-by: Ben Hutchings

blktrace: fix accounting of partially completed requests

2014-04-30T15:23:20+00:00

commit af5040da01ef980670b3741b3e10733ee3e33566 upstream.

trace_block_rq_complete does not take into account that request can
be partially completed, so we can get the following incorrect output
of blkparser:

  C   R 232 + 240 [0]
  C   R 240 + 232 [0]
  C   R 248 + 224 [0]
  C   R 256 + 216 [0]

but should be:

  C   R 232 + 8 [0]
  C   R 240 + 8 [0]
  C   R 248 + 8 [0]
  C   R 256 + 8 [0]

Also, the whole output summary statistics of completed requests and
final throughput will be incorrect.

This patch takes into account real completion size of the request and
fixes wrong completion accounting.

Signed-off-by: Roman Pen 
CC: Steven Rostedt 
CC: Frederic Weisbecker 
CC: Ingo Molnar 
CC: linux-kernel@vger.kernel.org
Signed-off-by: Jens Axboe 
[bwh: Backported to 3.2: drop change in blk-mq.c]
Signed-off-by: Ben Hutchings

kernel: Fix files explicitly needing EXPORT_SYMBOL infrastructure

2011-10-31T23:30:05+00:00

These files were getting  via an implicit non-obvious
path, but we want to crush those out of existence since they cost
time during compiles of processing thousands of lines of headers
for no reason.  Give them the lightweight header that just contains
the EXPORT_SYMBOL infrastructure.

Signed-off-by: Paul Gortmaker

blktrace: add FLUSH/FUA support

2011-08-11T08:36:05+00:00

Add FLUSH/FUA support to blktrace. As FLUSH precedes WRITE and/or
FUA follows WRITE, use the same 'F' flag for both cases and
distinguish them by their (relative) position. The end results
look like (other flags might be shown also):

 - WRITE:            W
 - WRITE_FLUSH:      FW
 - WRITE_FUA:        WF
 - WRITE_FLUSH_FUA:  FWF

Note that we reuse TC_BARRIER due to lack of bit space of act_mask
so that the older versions of blktrace tools will report flush
requests as barriers from now on.

Cc: Steven Rostedt 
Cc: Frederic Weisbecker 
Cc: Ingo Molnar 
Signed-off-by: Namhyung Kim 
Reviewed-by: Jeff Moyer 
Signed-off-by: Jens Axboe

block: make unplug timer trace event correspond to the schedule() unplug

2011-04-16T11:51:05+00:00

It's a pretty close match to what we had before - the timer triggering
would mean that nobody unplugged the plug in due time, in the new
scheme this matches very closely what the schedule() unplug now is.
It's essentially the difference between an explicit unplug (IO unplug)
or an implicit unplug (timer unplug, we scheduled with pending IO
queued).

Signed-off-by: Jens Axboe

block: fixup block IO unplug trace call

2011-04-12T08:12:19+00:00

It was removed with the on-stack plugging, readd it and track the
depth of requests added when flushing the plug.

Signed-off-by: Jens Axboe

block: remove block_unplug_timer() trace point

2011-04-12T08:06:33+00:00

We no longer have an unplug timer running, so no point in keeping
the trace point.

Signed-off-by: Jens Axboe

blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.

2011-03-11T19:11:59+00:00

In blk_add_trace_rq, we only chose the minor 2 bits from
request's cmd_flags and did some check for discard.
so most of other flags(e.g, REQ_SYNC) are missing.

For example, with a sync write after blkparse we get:
  8,16   1        1     0.001776503  7509  A  WS 1349632 + 1024 <- (8,17) 1347584
  8,16   1        2     0.001776813  7509  Q  WS 1349632 + 1024 [dd]
  8,16   1        3     0.001780395  7509  G  WS 1349632 + 1024 [dd]
  8,16   1        5     0.001783186  7509  I   W 1349632 + 1024 [dd]
  8,16   1       11     0.001816987  7509  D   W 1349632 + 1024 [dd]
  8,16   0        2     0.006218192     0  C   W 1349632 + 1024 [0]

Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to __blk_add_trace.

With this patch, after a sync write we get:
  8,16   1        1     0.001776900  5425  A  WS 1189888 + 1024 <- (8,17) 1187840
  8,16   1        2     0.001777179  5425  Q  WS 1189888 + 1024 [dd]
  8,16   1        3     0.001780797  5425  G  WS 1189888 + 1024 [dd]
  8,16   1        5     0.001783402  5425  I  WS 1189888 + 1024 [dd]
  8,16   1       11     0.001817468  5425  D  WS 1189888 + 1024 [dd]
  8,16   0        2     0.005640709     0  C  WS 1189888 + 1024 [0]

Signed-off-by: Tao Ma 
Acked-by: Jeff Moyer 
Signed-off-by: Jens Axboe

blktrace: Remove blk_fill_rwbs_rq.

2011-03-03T15:53:20+00:00

If we enable trace events to trace block actions, We use
blk_fill_rwbs_rq to analyze the corresponding actions
in request's cmd_flags, but we only choose the minor 2 bits
from it, so most of other flags(e.g, REQ_SYNC) are missing.
For example, with a sync write we get:
write_test-2409  [001]   160.013869: block_rq_insert: 3,64 W 0 () 258135 + =
8 [write_test]

Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to blk_fill_rwbs and
blk_fill_rwbs_rq isn't needed any more.

With this patch, after a sync write we get:
write_test-2417  [000]   226.603878: block_rq_insert: 3,64 WS 0 () 258135 +=
 8 [write_test]

Signed-off-by: Tao Ma 
Acked-by: Jeff Moyer 
Signed-off-by: Jens Axboe