linux-stable.git/kernel/time, branch v4.19.78

alarmtimer: Use EOPNOTSUPP instead of ENOTSUPP

2019-10-05T11:10:07+00:00

commit f18ddc13af981ce3c7b7f26925f099e7c6929aba upstream.

ENOTSUPP is not supposed to be returned to userspace. This was found on an
OpenPower machine, where the RTC does not support set_alarm.

On that system, a clock_nanosleep(CLOCK_REALTIME_ALARM, ...) results in
"524 Unknown error 524"

Replace it with EOPNOTSUPP which results in the expected "95 Operation not
supported" error.

Fixes: 1c6b39ad3f01 (alarmtimers: Return -ENOTSUPP if no RTC device is present)
Signed-off-by: Thadeu Lima de Souza Cascardo 
Signed-off-by: Thomas Gleixner 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190903171802.28314-1-cascardo@canonical.com
Signed-off-by: Greg Kroah-Hartman

posix-cpu-timers: Sanitize bogus WARNONS

2019-10-05T11:09:47+00:00

[ Upstream commit 692117c1f7a6770ed41dd8f277cd9fed1dfb16f1 ]

Warning when p == NULL and then proceeding and dereferencing p does not
make any sense as the kernel will crash with a NULL pointer dereference
right away.

Bailing out when p == NULL and returning an error code does not cure the
underlying problem which caused p to be NULL. Though it might allow to
do proper debugging.

Same applies to the clock id check in set_process_cpu_timer().

Clean them up and make them return without trying to do further damage.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Frederic Weisbecker 
Link: https://lkml.kernel.org/r/20190819143801.846497772@linutronix.de
Signed-off-by: Sasha Levin

timekeeping: Use proper ktime_add when adding nsecs in coarse offset

2019-09-16T06:21:42+00:00

[ Upstream commit 0354c1a3cdf31f44b035cfad14d32282e815a572 ]

While this doesn't actually amount to a real difference, since the macro
evaluates to the same thing, every place else operates on ktime_t using
these functions, so let's not break the pattern.

Fixes: e3ff9c3678b4 ("timekeeping: Repair ktime_get_coarse*() granularity")
Signed-off-by: Jason A. Donenfeld 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Arnd Bergmann 
Link: https://lkml.kernel.org/r/20190621203249.3909-1-Jason@zx2c4.com
Signed-off-by: Sasha Levin

timer_list: Guard procfs specific code

2019-07-26T07:14:10+00:00

[ Upstream commit a9314773a91a1d3b36270085246a6715a326ff00 ]

With CONFIG_PROC_FS=n the following warning is emitted:

kernel/time/timer_list.c:361:36: warning: unused variable
'timer_list_sops' [-Wunused-const-variable]
   static const struct seq_operations timer_list_sops = {

Add #ifdef guard around procfs specific code.

Signed-off-by: Nathan Huckleberry 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Nick Desaulniers 
Cc: john.stultz@linaro.org
Cc: sboyd@kernel.org
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/534
Link: https://lkml.kernel.org/r/20190614181604.112297-1-nhuck@google.com
Signed-off-by: Sasha Levin

ntp: Limit TAI-UTC offset

2019-07-26T07:14:10+00:00

[ Upstream commit d897a4ab11dc8a9fda50d2eccc081a96a6385998 ]

Don't allow the TAI-UTC offset of the system clock to be set by adjtimex()
to a value larger than 100000 seconds.

This prevents an overflow in the conversion to int, prevents the CLOCK_TAI
clock from getting too far ahead of the CLOCK_REALTIME clock, and it is
still large enough to allow leap seconds to be inserted at the maximum rate
currently supported by the kernel (once per day) for the next ~270 years,
however unlikely it is that someone can survive a catastrophic event which
slowed down the rotation of the Earth so much.

Reported-by: Weikang shi 
Signed-off-by: Miroslav Lichvar 
Signed-off-by: Thomas Gleixner 
Cc: John Stultz 
Cc: Prarit Bhargava 
Cc: Richard Cochran 
Cc: Stephen Boyd 
Link: https://lkml.kernel.org/r/20190618154713.20929-1-mlichvar@redhat.com
Signed-off-by: Sasha Levin

timekeeping: Repair ktime_get_coarse*() granularity

2019-06-19T06:18:06+00:00

commit e3ff9c3678b4d80e22d2557b68726174578eaf52 upstream.

Jason reported that the coarse ktime based time getters advance only once
per second and not once per tick as advertised.

The code reads only the monotonic base time, which advances once per
second. The nanoseconds are accumulated on every tick in xtime_nsec up to
a second and the regular time getters take this nanoseconds offset into
account, but the ktime_get_coarse*() implementation fails to do so.

Add the accumulated xtime_nsec value to the monotonic base time to get the
proper per tick advancing coarse tinme.

Fixes: b9ff604cff11 ("timekeeping: Add ktime_get_coarse_with_offset")
Reported-by: Jason A. Donenfeld 
Signed-off-by: Thomas Gleixner 
Tested-by: Jason A. Donenfeld 
Cc: Arnd Bergmann 
Cc: Peter Zijlstra 
Cc: Clemens Ladisch 
Cc: Sultan Alsawaf 
Cc: Waiman Long 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1906132136280.1791@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman

ntp: Allow TAI-UTC offset to be set to zero

2019-06-15T09:54:04+00:00

[ Upstream commit fdc6bae940ee9eb869e493990540098b8c0fd6ab ]

The ADJ_TAI adjtimex mode sets the TAI-UTC offset of the system clock.
It is typically set by NTP/PTP implementations and it is automatically
updated by the kernel on leap seconds. The initial value is zero (which
applications may interpret as unknown), but this value cannot be set by
adjtimex. This limitation seems to go back to the original "nanokernel"
implementation by David Mills.

Change the ADJ_TAI check to accept zero as a valid TAI-UTC offset in
order to allow setting it back to the initial value.

Fixes: 153b5d054ac2 ("ntp: support for TAI")
Suggested-by: Ondrej Mosnacek 
Signed-off-by: Miroslav Lichvar 
Signed-off-by: Thomas Gleixner 
Cc: John Stultz 
Cc: Richard Cochran 
Cc: Prarit Bhargava 
Link: https://lkml.kernel.org/r/20190417084833.7401-1-mlichvar@redhat.com
Signed-off-by: Sasha Levin

timekeeping: Force upper bound for setting CLOCK_REALTIME

2019-05-31T13:46:29+00:00

[ Upstream commit 7a8e61f8478639072d402a26789055a4a4de8f77 ]

Several people reported testing failures after setting CLOCK_REALTIME close
to the limits of the kernel internal representation in nanoseconds,
i.e. year 2262.

The failures are exposed in subsequent operations, i.e. when arming timers
or when the advancing CLOCK_MONOTONIC makes the calculation of
CLOCK_REALTIME overflow into negative space.

Now people start to paper over the underlying problem by clamping
calculations to the valid range, but that's just wrong because such
workarounds will prevent detection of real issues as well.

It is reasonable to force an upper bound for the various methods of setting
CLOCK_REALTIME. Year 2262 is the absolute upper bound. Assume a maximum
uptime of 30 years which is plenty enough even for esoteric embedded
systems. That results in an upper bound of year 2232 for setting the time.

Once that limit is reached in reality this limit is only a small part of
the problem space. But until then this stops people from trying to paper
over the problem at the wrong places.

Reported-by: Xiongfeng Wang 
Reported-by: Hongbo Yao 
Signed-off-by: Thomas Gleixner 
Cc: John Stultz 
Cc: Stephen Boyd 
Cc: Miroslav Lichvar 
Cc: Arnd Bergmann 
Cc: Richard Cochran 
Cc: Peter Zijlstra 
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1903231125480.2157@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin

timers/sched_clock: Prevent generic sched_clock wrap caused by tick_freeze()

2019-04-27T07:36:38+00:00

commit 3f2552f7e9c5abef2775c53f7af66532f8bf65bc upstream.

tick_freeze() introduced by suspend-to-idle in commit 124cf9117c5f ("PM /
sleep: Make it possible to quiesce timers during suspend-to-idle") uses
timekeeping_suspend() instead of syscore_suspend() during
suspend-to-idle. As a consequence generic sched_clock will keep going
because sched_clock_suspend() and sched_clock_resume() are not invoked
during suspend-to-idle which can result in a generic sched_clock wrap.

On a ARM system with suspend-to-idle enabled, sched_clock is registered
as "56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns", which
means the real wrapping duration is 8796093022202ns.

[  134.551779] suspend-to-idle suspend (timekeeping_suspend())
[ 1204.912239] suspend-to-idle resume (timekeeping_resume())
......
[ 1206.912239] suspend-to-idle suspend (timekeeping_suspend())
[ 5880.502807] suspend-to-idle resume (timekeeping_resume())
......
[ 6000.403724] suspend-to-idle suspend (timekeeping_suspend())
[ 8035.753167] suspend-to-idle resume  (timekeeping_resume())
......
[ 8795.786684] (2)[321:charger_thread]......
[ 8795.788387] (2)[321:charger_thread]......
[    0.057226] (0)[0:swapper/0]......
[    0.061447] (2)[0:swapper/2]......

sched_clock was not stopped during suspend-to-idle, and sched_clock_poll
hrtimer was not expired because timekeeping_suspend() was invoked during
suspend-to-idle. It makes sched_clock wrap at kernel time 8796s.

To prevent this, invoke sched_clock_suspend() and sched_clock_resume() in
tick_freeze() together with timekeeping_suspend() and timekeeping_resume().

Fixes: 124cf9117c5f (PM / sleep: Make it possible to quiesce timers during suspend-to-idle)
Signed-off-by: Chang-An Chen 
Signed-off-by: Thomas Gleixner 
Cc: Frederic Weisbecker 
Cc: Matthias Brugger 
Cc: John Stultz 
Cc: Kees Cook 
Cc: Corey Minyard 
Cc: 
Cc: 
Cc: Stanley Chu 
Cc: 
Cc: 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1553828349-8914-1-git-send-email-chang-an.chen@mediatek.com
Signed-off-by: Greg Kroah-Hartman

alarmtimer: Return correct remaining time

2019-04-17T06:38:50+00:00

commit 07d7e12091f4ab869cc6a4bb276399057e73b0b3 upstream.

To calculate a remaining time, it's required to subtract the current time
from the expiration time. In alarm_timer_remaining() the arguments of
ktime_sub are swapped.

Fixes: d653d8457c76 ("alarmtimer: Implement remaining callback")
Signed-off-by: Andrei Vagin 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Mukesh Ojha 
Cc: Stephen Boyd 
Cc: John Stultz 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190408041542.26338-1-avagin@gmail.com
Signed-off-by: Greg Kroah-Hartman