linux-stable.git/kernel/sysctl.c, branch v4.1.41

sysctl: fix proc_doulongvec_ms_jiffies_minmax()

2017-03-06T22:31:11+00:00

[ Upstream commit ff9f8a7cf935468a94d9927c68b00daae701667e ]

We perform the conversion between kernel jiffies and ms only when
exporting kernel value to user space.

We need to do the opposite operation when value is written by user.

Only matters when HZ != 1000

Signed-off-by: Eric Dumazet 
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

mnt: Add a per mount namespace limit on the number of mounts

2016-12-23T13:56:35+00:00

[ Upstream commit d29216842a85c7970c536108e093963f02714498 ]

CAI Qian  pointed out that the semantics
of shared subtrees make it possible to create an exponentially
increasing number of mounts in a mount namespace.

    mkdir /tmp/1 /tmp/2
    mount --make-rshared /
    for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done

Will create create 2^20 or 1048576 mounts, which is a practical problem
as some people have managed to hit this by accident.

As such CVE-2016-6213 was assigned.

Ian Kent  described the situation for autofs users
as follows:

> The number of mounts for direct mount maps is usually not very large because of
> the way they are implemented, large direct mount maps can have performance
> problems. There can be anywhere from a few (likely case a few hundred) to less
> than 10000, plus mounts that have been triggered and not yet expired.
>
> Indirect mounts have one autofs mount at the root plus the number of mounts that
> have been triggered and not yet expired.
>
> The number of autofs indirect map entries can range from a few to the common
> case of several thousand and in rare cases up to between 30000 and 50000. I've
> not heard of people with maps larger than 50000 entries.
>
> The larger the number of map entries the greater the possibility for a large
> number of active mounts so it's not hard to expect cases of a 1000 or somewhat
> more active mounts.

So I am setting the default number of mounts allowed per mount
namespace at 100,000.  This is more than enough for any use case I
know of, but small enough to quickly stop an exponential increase
in mounts.  Which should be perfect to catch misconfigurations and
malfunctioning programs.

For anyone who needs a higher limit this can be changed by writing
to the new /proc/sys/fs/mount-max sysctl.

Tested-by: CAI Qian 
Signed-off-by: "Eric W. Biederman" 

Conflicts:
	fs/namespace.c
	kernel/sysctl.c

Signed-off-by: Philipp Hahn 
Signed-off-by: Sasha Levin

pipe: limit the per-user amount of pages allocated in pipes

2016-07-11T03:07:27+00:00

[ Upstream commit 759c01142a5d0f364a462346168a56de28a80f52 ]

On no-so-small systems, it is possible for a single process to cause an
OOM condition by filling large pipes with data that are never read. A
typical process filling 4000 pipes with 1 MB of data will use 4 GB of
memory. On small systems it may be tricky to set the pipe max size to
prevent this from happening.

This patch makes it possible to enforce a per-user soft limit above
which new pipes will be limited to a single page, effectively limiting
them to 4 kB each, as well as a hard limit above which no new pipes may
be created for this user. This has the effect of protecting the system
against memory abuse without hurting other users, and still allowing
pipes to work correctly though with less data at once.

The limit are controlled by two new sysctls : pipe-user-pages-soft, and
pipe-user-pages-hard. Both may be disabled by setting them to zero. The
default soft limit allows the default number of FDs per process (1024)
to create pipes of the default size (64kB), thus reaching a limit of 64MB
before starting to create only smaller pipes. With 256 processes limited
to 1024 FDs each, this results in 1024*64kB + (256*1024 - 1024) * 4kB =
1084 MB of memory allocated for a user. The hard limit is disabled by
default to avoid breaking existing applications that make intensive use
of pipes (eg: for splicing).

Reported-by: socketpair@gmail.com
Reported-by: Tetsuo Handa 
Mitigates: CVE-2013-4312 (Linux 2.0+)
Suggested-by: Linus Torvalds 
Signed-off-by: Willy Tarreau 
Signed-off-by: Al Viro 
Signed-off-by: Sasha Levin

sysctl: Allow creating permanently empty directories that serve as mountpoints.

2015-07-21T17:10:00+00:00

commit f9bd6733d3f11e24f3949becf277507d422ee1eb upstream.

Add a magic sysctl table sysctl_mount_point that when used to
create a directory forces that directory to be permanently empty.

Update the code to use make_empty_dir_inode when accessing permanently
empty directories.

Update the code to not allow adding to permanently empty directories.

Update /proc/sys/fs/binfmt_misc to be a permanently empty directory.

Signed-off-by: "Eric W. Biederman" 
Signed-off-by: Greg Kroah-Hartman

kernel/sysctl.c: detect overflows when converting to int

2015-04-17T13:04:08+00:00

When converting unsigned long to int overflows may occur.  These currently
are not detected when writing to the sysctl file system.

E.g. on a system where int has 32 bits and long has 64 bits
  echo 0x800001234 > /proc/sys/kernel/threads-max
has the same effect as
  echo 0x1234 > /proc/sys/kernel/threads-max

The patch adds the missing check in do_proc_dointvec_conv.

With the patch an overflow will result in an error EINVAL when writing to
the the sysctl file system.

Signed-off-by: Heinrich Schuchardt 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

kernel/sysctl.c: threads-max observe limits

2015-04-17T13:04:07+00:00

Users can change the maximum number of threads by writing to
/proc/sys/kernel/threads-max.

With the patch the value entered is checked against the same limits that
apply when fork_init is called.

Signed-off-by: Heinrich Schuchardt 
Cc: Oleg Nesterov 
Cc: Ingo Molnar 
Cc: Guenter Roeck 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: allow compaction of unevictable pages

2015-04-15T23:35:17+00:00

Currently, pages which are marked as unevictable are protected from
compaction, but not from other types of migration.  The POSIX real time
extension explicitly states that mlock() will prevent a major page
fault, but the spirit of this is that mlock() should give a process the
ability to control sources of latency, including minor page faults.
However, the mlock manpage only explicitly says that a locked page will
not be written to swap and this can cause some confusion.  The
compaction code today does not give a developer who wants to avoid swap
but wants to have large contiguous areas available any method to achieve
this state.  This patch introduces a sysctl for controlling compaction
behavior with respect to the unevictable lru.  Users who demand no page
faults after a page is present can set compact_unevictable_allowed to 0
and users who need the large contiguous areas can enable compaction on
locked memory by leaving the default value of 1.

To illustrate this problem I wrote a quick test program that mmaps a
large number of 1MB files filled with random data.  These maps are
created locked and read only.  Then every other mmap is unmapped and I
attempt to allocate huge pages to the static huge page pool.  When the
compact_unevictable_allowed sysctl is 0, I cannot allocate hugepages
after fragmenting memory.  When the value is set to 1, allocations
succeed.

Signed-off-by: Eric B Munson 
Acked-by: Michal Hocko 
Acked-by: Vlastimil Babka 
Acked-by: Christoph Lameter 
Acked-by: David Rientjes 
Acked-by: Rik van Riel 
Cc: Vlastimil Babka 
Cc: Thomas Gleixner 
Cc: Christoph Lameter 
Cc: Peter Zijlstra 
Cc: Mel Gorman 
Cc: David Rientjes 
Cc: Michal Hocko 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'akpm' (patches from Andrew)

2015-04-14T23:49:17+00:00

Merge first patchbomb from Andrew Morton:

 - arch/sh updates

 - ocfs2 updates

 - kernel/watchdog feature

 - about half of mm/

* emailed patches from Andrew Morton : (122 commits)
  Documentation: update arch list in the 'memtest' entry
  Kconfig: memtest: update number of test patterns up to 17
  arm: add support for memtest
  arm64: add support for memtest
  memtest: use phys_addr_t for physical addresses
  mm: move memtest under mm
  mm, hugetlb: abort __get_user_pages if current has been oom killed
  mm, mempool: do not allow atomic resizing
  memcg: print cgroup information when system panics due to panic_on_oom
  mm: numa: remove migrate_ratelimited
  mm: fold arch_randomize_brk into ARCH_HAS_ELF_RANDOMIZE
  mm: split ET_DYN ASLR from mmap ASLR
  s390: redefine randomize_et_dyn for ELF_ET_DYN_BASE
  mm: expose arch_mmap_rnd when available
  s390: standardize mmap_rnd() usage
  powerpc: standardize mmap_rnd() usage
  mips: extract logic for mmap_rnd()
  arm64: standardize mmap_rnd() usage
  x86: standardize mmap_rnd() usage
  arm: factor out mmap ASLR into mmap_rnd
  ...

watchdog: enable the new user interface of the watchdog mechanism

2015-04-14T23:48:59+00:00

With the current user interface of the watchdog mechanism it is only
possible to disable or enable both lockup detectors at the same time.
This series introduces new kernel parameters and changes the semantics of
some existing kernel parameters, so that the hard lockup detector and the
soft lockup detector can be disabled or enabled individually.  With this
series applied, the user interface is as follows.

- parameters in /proc/sys/kernel

  . soft_watchdog
    This is a new parameter to control and examine the run state of
    the soft lockup detector.

  . nmi_watchdog
    The semantics of this parameter have changed. It can now be used
    to control and examine the run state of the hard lockup detector.

  . watchdog
    This parameter is still available to control the run state of both
    lockup detectors at the same time. If this parameter is examined,
    it shows the logical OR of soft_watchdog and nmi_watchdog.

  . watchdog_thresh
    The semantics of this parameter are not affected by the patch.

- kernel command line parameters

  . nosoftlockup
    The semantics of this parameter have changed. It can now be used
    to disable the soft lockup detector at boot time.

  . nmi_watchdog=0 or nmi_watchdog=1
    Disable or enable the hard lockup detector at boot time. The patch
    introduces '=1' as a new option.

  . nowatchdog
    The semantics of this parameter are not affected by the patch. It
    is still available to disable both lockup detectors at boot time.

Also, remove the proc_dowatchdog() function which is no longer needed.

[dzickus@redhat.com: wrote changelog]
[dzickus@redhat.com: update documentation for kernel params and sysctl]
Signed-off-by: Ulrich Obergfell 
Signed-off-by: Don Zickus 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2015-04-14T22:31:03+00:00

Pull vfs update from Al Viro:
 "Part one:

   - struct filename-related cleanups

   - saner iov_iter_init() replacements (and switching the syscalls to
     use of those)

   - ntfs switch to ->write_iter() (Anton)

   - aio cleanups and splitting iocb into common and async parts
     (Christoph)

   - assorted fixes (me, bfields, Andrew Elble)

  There's a lot more, including the completion of switchover to
  ->{read,write}_iter(), d_inode/d_backing_inode annotations, f_flags
  race fixes, etc, but that goes after #for-davem merge.  David has
  pulled it, and once it's in I'll send the next vfs pull request"

* 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (35 commits)
  sg_start_req(): use import_iovec()
  sg_start_req(): make sure that there's not too many elements in iovec
  blk_rq_map_user(): use import_single_range()
  sg_io(): use import_iovec()
  process_vm_access: switch to {compat_,}import_iovec()
  switch keyctl_instantiate_key_common() to iov_iter
  switch {compat_,}do_readv_writev() to {compat_,}import_iovec()
  aio_setup_vectored_rw(): switch to {compat_,}import_iovec()
  vmsplice_to_user(): switch to import_iovec()
  kill aio_setup_single_vector()
  aio: simplify arguments of aio_setup_..._rw()
  aio: lift iov_iter_init() into aio_setup_..._rw()
  lift iov_iter into {compat_,}do_readv_writev()
  NFS: fix BUG() crash in notify_change() with patch to chown_common()
  dcache: return -ESTALE not -EBUSY on distributed fs race
  NTFS: Version 2.1.32 - Update file write from aio_write to write_iter.
  VFS: Add iov_iter_fault_in_multipages_readable()
  drop bogus check in file_open_root()
  switch security_inode_getattr() to struct path *
  constify tomoyo_realpath_from_path()
  ...