linux-stable.git/kernel/softirq.c, branch linux-2.6.39.y

Fix common misspellings

2011-03-31T14:26:23+00:00

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi

kthread: use kthread_create_on_node()

2011-03-23T00:44:01+00:00

ksoftirqd, kworker, migration, and pktgend kthreads can be created with
kthread_create_on_node(), to get proper NUMA affinities for their stack and
task_struct.

Signed-off-by: Eric Dumazet 
Acked-by: David S. Miller 
Reviewed-by: Andi Kleen 
Acked-by: Rusty Russell 
Acked-by: Tejun Heo 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: David Howells 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

2011-03-16T02:23:40+00:00

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (116 commits)
  x86: Enable forced interrupt threading support
  x86: Mark low level interrupts IRQF_NO_THREAD
  x86: Use generic show_interrupts
  x86: ioapic: Avoid redundant lookup of irq_cfg
  x86: ioapic: Use new move_irq functions
  x86: Use the proper accessors in fixup_irqs()
  x86: ioapic: Use irq_data->state
  x86: ioapic: Simplify irq chip and handler setup
  x86: Cleanup the genirq name space
  genirq: Add chip flag to force mask on suspend
  genirq: Add desc->irq_data accessor
  genirq: Add comments to Kconfig switches
  genirq: Fixup fasteoi handler for oneshot mode
  genirq: Provide forced interrupt threading
  sched: Switch wait_task_inactive to schedule_hrtimeout()
  genirq: Add IRQF_NO_THREAD
  genirq: Allow shared oneshot interrupts
  genirq: Prepare the handling of shared oneshot interrupts
  genirq: Make warning in handle_percpu_event useful
  x86: ioapic: Move trigger defines to io_apic.h
  ...

Fix up trivial(?) conflicts in arch/x86/pci/xen.c due to genirq name
space changes clashing with the Xen cleanups.  The set_irq_msi() had
moved to xen_bind_pirq_msi_to_irq().

genirq: Provide forced interrupt threading

2011-02-26T10:57:18+00:00

Add a commandline parameter "threadirqs" which forces all interrupts except
those marked IRQF_NO_THREAD to run threaded. That's mostly a debug option to
allow retrieving better debug data from crashing interrupt handlers. If
"threadirqs" is not enabled on the kernel command line, then there is no
impact in the interrupt hotpath.

Architecture code needs to select CONFIG_IRQ_FORCED_THREADING after
marking the interrupts which cant be threaded IRQF_NO_THREAD. All
interrupts which have IRQF_TIMER set are implict marked
IRQF_NO_THREAD. Also all PER_CPU interrupts are excluded.

Forced threading hard interrupts also forces all soft interrupt
handling into thread context.

When enabled it might slow down things a bit, but for debugging problems in
interrupt code it's a reasonable penalty as it does not immediately
crash and burn the machine when an interrupt handler is buggy.

Some test results on a Core2Duo machine:

Cache cold run of:
 # time git grep irq_desc

      non-threaded       threaded
 real 1m18.741s          1m19.061s
 user 0m1.874s           0m1.757s
 sys  0m5.843s           0m5.427s

 # iperf -c server
non-threaded
[  3]  0.0-10.0 sec  1.09 GBytes   933 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   934 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   933 Mbits/sec
threaded
[  3]  0.0-10.0 sec  1.09 GBytes   939 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   934 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   937 Mbits/sec

Signed-off-by: Thomas Gleixner 
Cc: Peter Zijlstra 
LKML-Reference: <20110223234956.772668648@linutronix.de>

softirq: Avoid stack switch from ksoftirqd

2011-02-08T18:37:12+00:00

ksoftirqd() calls do_softirq() which switches stacks on several
architectures. That makes no sense at all. ksoftirqd's stack is
sufficient.

Call __do_softirq() directly.

Signed-off-by: Thomas Gleixner 
Acked-by: Peter Zijlstra 
Cc: Benjamin Herrenschmidt 
Cc: Heiko Carstens 
Acked-by: David Miller 
Cc: Paul Mundt 
Reviewed-by: Frank Rowand 
LKML-Reference:

softirqs: Free up pf flag PF_KSOFTIRQD

2011-01-26T11:33:20+00:00

Cleanup patch, freeing up PF_KSOFTIRQD and use per_cpu ksoftirqd pointer
instead, as suggested by Eric Dumazet.

Tested-by: Shaun Ruffell 
Signed-off-by: Venkatesh Pallipadi 
Signed-off-by: Peter Zijlstra 
LKML-Reference: <1292980144-28796-2-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar

kernel: clean up USE_GENERIC_SMP_HELPERS

2011-01-13T16:03:08+00:00

For arch which needs USE_GENERIC_SMP_HELPERS, it has to select
USE_GENERIC_SMP_HELPERS, rather than leaving a choice to user, since they
don't provide their own implementions.

Also, move on_each_cpu() to kernel/smp.c, it is strange to put it in
kernel/softirq.c.

For arch which doesn't use USE_GENERIC_SMP_HELPERS, e.g.  blackfin, only
on_each_cpu() is compiled.

Signed-off-by: Amerigo Wang 
Cc: David Howells 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: "H. Peter Anvin" 
Cc: Yinghai Lu 
Cc: Peter Zijlstra 
Cc: Randy Dunlap 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu

2011-01-08T01:02:58+00:00

* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits)
  gameport: use this_cpu_read instead of lookup
  x86: udelay: Use this_cpu_read to avoid address calculation
  x86: Use this_cpu_inc_return for nmi counter
  x86: Replace uses of current_cpu_data with this_cpu ops
  x86: Use this_cpu_ops to optimize code
  vmstat: User per cpu atomics to avoid interrupt disable / enable
  irq_work: Use per cpu atomics instead of regular atomics
  cpuops: Use cmpxchg for xchg to avoid lock semantics
  x86: this_cpu_cmpxchg and this_cpu_xchg operations
  percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support
  percpu,x86: relocate this_cpu_add_return() and friends
  connector: Use this_cpu operations
  xen: Use this_cpu_inc_return
  taskstats: Use this_cpu_ops
  random: Use this_cpu_inc_return
  fs: Use this_cpu_inc_return in buffer.c
  highmem: Use this_cpu_xx_return() operations
  vmstat: Use this_cpu_inc_return for vm statistics
  x86: Support for this_cpu_add, sub, dec, inc_return
  percpu: Generic support for this_cpu_add, sub, dec, inc_return
  ...

Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c}
as per Tejun.

sched: Constify function scope static struct sched_param usage

2011-01-07T14:55:45+00:00

Function-scope statics are discouraged because they are
easily overlooked and can cause subtle bugs/races due to
their global (non-SMP safe) nature.

Linus noticed that we did this for sched_param - at minimum
make the const.

Suggested-by: Linus Torvalds 
Signed-off-by: Peter Zijlstra 
LKML-Reference: Message-ID: 
Signed-off-by: Ingo Molnar

core: Replace __get_cpu_var with __this_cpu_read if not used for an address.

2010-12-17T14:07:19+00:00

__get_cpu_var() can be replaced with this_cpu_read and will then use a
single read instruction with implied address calculation to access the
correct per cpu instance.

However, the address of a per cpu variable passed to __this_cpu_read()
cannot be determined (since it's an implied address conversion through
segment prefixes).  Therefore apply this only to uses of __get_cpu_var
where the address of the variable is not used.

Cc: Pekka Enberg 
Cc: Hugh Dickins 
Cc: Thomas Gleixner 
Acked-by: H. Peter Anvin 
Signed-off-by: Christoph Lameter 
Signed-off-by: Tejun Heo