linux-stable.git/kernel/sched/isolation.c, branch v5.2

treewide: Add SPDX license identifier for missed files

2019-05-21T08:50:45+00:00

Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

sched/isolation: Require a present CPU in housekeeping mask

2019-05-03T17:42:58+00:00

During housekeeping mask setup, currently a possible CPU is required.
That does not guarantee the CPU would be available at boot time, so
check to ensure that at least one present CPU is in the mask.

Signed-off-by: Nicholas Piggin 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Frederic Weisbecker 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Rafael J . Wysocki 
Cc: Thomas Gleixner 
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lkml.kernel.org/r/20190411033448.20842-5-npiggin@gmail.com
Signed-off-by: Ingo Molnar

sched/fair: Use non-atomic cpumask_{set,clear}_cpu()

2019-02-13T07:34:13+00:00

The cpumasks updated here are not subject to concurrency and using
atomic bitops for them is pointless and expensive. Use the non-atomic
variants instead.

Suggested-by: Peter Zijlstra 
Signed-off-by: Viresh Kumar 
Cc: Linus Torvalds 
Cc: Thomas Gleixner 
Cc: Vincent Guittot 
Link: http://lkml.kernel.org/r/2e2a10f84b9049a81eef94ed6d5989447c21e34a.1549963617.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar

sched: Fix various typos in comments

2018-12-03T10:55:42+00:00

Go over the scheduler source code and fix common typos
in comments - and a typo in an actual variable name.

No change in functionality intended.

Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: Linus Torvalds 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

sched/headers: Simplify and clean up header usage in the scheduler

2018-03-04T11:39:29+00:00

Do the following cleanups and simplifications:

 - sched/sched.h already includes , so no need to
   include it in sched/core.c again.

 - order the  headers alphabetically

 - add all  headers to kernel/sched/sched.h

 - remove all unnecessary includes from the .c files that
   are already included in kernel/sched/sched.h.

Finally, make all scheduler .c files use a single common header:

  #include "sched.h"

... which now contains a union of the relied upon headers.

This makes the various .c files easier to read and easier to handle.

Cc: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

sched: Clean up and harmonize the coding style of the scheduler code base

2018-03-03T14:50:21+00:00

A good number of small style inconsistencies have accumulated
in the scheduler core, so do a pass over them to harmonize
all these details:

 - fix speling in comments,

 - use curly braces for multi-line statements,

 - remove unnecessary parentheses from integer literals,

 - capitalize consistently,

 - remove stray newlines,

 - add comments where necessary,

 - remove invalid/unnecessary comments,

 - align structure definitions and other data types vertically,

 - add missing newlines for increased readability,

 - fix vertical tabulation where it's misaligned,

 - harmonize preprocessor conditional block labeling
   and vertical alignment,

 - remove line-breaks where they uglify the code,

 - add newline after local variable definitions,

No change in functionality:

  md5:
     1191fa0a890cfa8132156d2959d7e9e2  built-in.o.before.asm
     1191fa0a890cfa8132156d2959d7e9e2  built-in.o.after.asm

Cc: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

sched/isolation: Offload residual 1Hz scheduler tick

2018-02-21T08:49:09+00:00

When a CPU runs in full dynticks mode, a 1Hz tick remains in order to
keep the scheduler stats alive. However this residual tick is a burden
for bare metal tasks that can't stand any interruption at all, or want
to minimize them.

The usual boot parameters "nohz_full=" or "isolcpus=nohz" will now
outsource these scheduler ticks to the global workqueue so that a
housekeeping CPU handles those remotely. The sched_class::task_tick()
implementations have been audited and look safe to be called remotely
as the target runqueue and its current task are passed in parameter
and don't seem to be accessed locally.

Note that in the case of using isolcpus, it's still up to the user to
affine the global workqueues to the housekeeping CPUs through
/sys/devices/virtual/workqueue/cpumask or domains isolation
"isolcpus=nohz,domain".

Signed-off-by: Frederic Weisbecker 
Reviewed-by: Thomas Gleixner 
Acked-by: Peter Zijlstra 
Cc: Chris Metcalf 
Cc: Christoph Lameter 
Cc: Linus Torvalds 
Cc: Luiz Capitulino 
Cc: Mike Galbraith 
Cc: Paul E. McKenney 
Cc: Rik van Riel 
Cc: Wanpeng Li 
Link: http://lkml.kernel.org/r/1519186649-3242-6-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar

sched/isolation: Isolate workqueues when "nohz_full=" is set

2018-02-21T08:49:08+00:00

As we prepare for offloading the residual 1hz scheduler ticks to
workqueue, let's affine those to housekeepers so that they don't
interrupt the CPUs that don't want to be disturbed.

Signed-off-by: Frederic Weisbecker 
Reviewed-by: Thomas Gleixner 
Acked-by: Peter Zijlstra 
Cc: Chris Metcalf 
Cc: Christoph Lameter 
Cc: Linus Torvalds 
Cc: Luiz Capitulino 
Cc: Mike Galbraith 
Cc: Paul E. McKenney 
Cc: Rik van Riel 
Cc: Wanpeng Li 
Link: http://lkml.kernel.org/r/1519186649-3242-5-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar

sched/isolation: Add basic isolcpus flags

2017-10-27T07:55:31+00:00

Add flags to control NOHZ and domain isolation from "isolcpus=", in
order to centralize the isolation features to a common interface. Domain
isolation remains the default so not to break the existing isolcpus
boot paramater behaviour.

Further flags in the future may include 0hz (1hz tick offload) and timers,
workqueue, RCU, kthread, watchdog, likely all merged together in a
common flag ("async"?). In any case, this will have to be modifiable by
cpusets.

Signed-off-by: Frederic Weisbecker 
Acked-by: Thomas Gleixner 
Cc: Chris Metcalf 
Cc: Christoph Lameter 
Cc: Linus Torvalds 
Cc: Luiz Capitulino 
Cc: Mike Galbraith 
Cc: Paul E. McKenney 
Cc: Peter Zijlstra 
Cc: Rik van Riel 
Cc: Wanpeng Li 
Link: http://lkml.kernel.org/r/1509072159-31808-12-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar

sched/isolation: Move isolcpus= handling to the housekeeping code

2017-10-27T07:55:30+00:00

We want to centralize the isolation features, to be done by the housekeeping
subsystem and scheduler domain isolation is a significant part of it.

No intended behaviour change, we just reuse the housekeeping cpumask
and core code.

Signed-off-by: Frederic Weisbecker 
Acked-by: Thomas Gleixner 
Cc: Chris Metcalf 
Cc: Christoph Lameter 
Cc: Linus Torvalds 
Cc: Luiz Capitulino 
Cc: Mike Galbraith 
Cc: Paul E. McKenney 
Cc: Peter Zijlstra 
Cc: Rik van Riel 
Cc: Wanpeng Li 
Link: http://lkml.kernel.org/r/1509072159-31808-11-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar