commit 6e91f8cb138625be96070b778d9ba71ce520ea7e upstream.

If, at the time __rcu_process_callbacks() is invoked,  there are callbacks
in Tiny RCU's callback list, but none of them are ready to be invoked,
the current list-management code will knit the non-ready callbacks out
of the list.  This can result in hangs and possibly worse.  This commit
therefore inserts a check for there being no callbacks that can be
invoked immediately.

This bug is unlikely to occur -- you have to get a new callback between
the time rcu_sched_qs() or rcu_bh_qs() was called, but before we get to
__rcu_process_callbacks().  It was detected by the addition of RCU-bh
testing to rcutorture, which in turn was instigated by Iftekhar Ahmed's
mutation testing.  Although this bug was made much more likely by
915e8a4fe45e (rcu: Remove fastpath from __rcu_process_callbacks()), this
did not cause the bug, but rather made it much more probable.   That
said, it takes more than 40 hours of rcutorture testing, on average,
for this bug to appear, so this fix cannot be considered an emergency.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The standard code path accommodates a condition when no
RCU callbacks are ready to invoke. Since size of the code
is a priority for tiny RCU, remove the fast path.

Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

When the ->curtail and ->donetail pointers differ, ->rcucblist
always points to the beginning of the current list and thus
cannot be NULL. Therefore, the check ->rcucblist != NULL is
redundant and this commit removes it.

Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

doc.2015.01.07a: Documentation updates.
fixes.2015.01.15a: Miscellaneous fixes.
preempt.2015.01.06a: Changes to handling of lists of preempted tasks.
srcu.2015.01.06a: SRCU updates.
stall.2015.01.16a: RCU CPU stall-warning updates and fixes.
torture.2015.01.11a: RCU torture-test updates and fixes.

The current tiny RCU stall-warning code assumes that the jiffies counter
starts at zero, however, it is sometimes initialized to other values,
for example, -30,000.  This commit therefore changes rcu_init() to
invoke reset_cpu_stall_ticks() for both flavors of RCU to initialize
the stall-warning times properly at boot.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

For RCU in UP, context-switch = QS = GP, thus we can force a
context-switch when any call_rcu_[bh|sched]() is happened on idle_task.
After doing so, rcu_idle/irq_enter/exit() are useless, so we can simply
make these functions empty.

More important, this change does not change the functionality logically.
Note: raise_softirq(RCU_SOFTIRQ)/rcu_sched_qs() in rcu_idle_enter() and
outmost rcu_irq_exit() will have to wake up the ksoftirqd
(due to in_interrupt() == 0).

Before this patch		After this patch:
call_rcu_sched() in idle;	call_rcu_sched() in idle
				  set resched
do other stuffs;		do other stuffs
outmost rcu_irq_exit()		outmost rcu_irq_exit() (empty function)
  (or rcu_idle_enter())		  (or rcu_idle_enter(), also empty function)
				start to resched. (see above)
  rcu_sched_qs()		rcu_sched_qs()
    QS,and GP and advance cb	  QS,and GP and advance cb
    wake up the ksoftirqd	    wake up the ksoftirqd
      set resched
resched to ksoftirqd (or other)	resched to ksoftirqd (or other)

These two code patches are almost the same.

Size changed after patched:

size kernel/rcu/tiny-old.o kernel/rcu/tiny-patched.o
   text	   data	    bss	    dec	    hex	filename
   3449	    206	      8	   3663	    e4f	kernel/rcu/tiny-old.o
   2406	    144	      8	   2558	    9fe	kernel/rcu/tiny-patched.o

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

Let's start assuming that something in the idle loop posts a callback,
and scheduling-clock interrupt occurs:

1. The system is idle and stays that way, no runnable tasks.

2. Scheduling-clock interrupt occurs, rcu_check_callbacks() is called
   as result, which in turn calls rcu_is_cpu_rrupt_from_idle().

3. rcu_is_cpu_rrupt_from_idle() reports the CPU was interrupted from
   idle, which results in rcu_sched_qs() call, which does a
   raise_softirq(RCU_SOFTIRQ).

4. Upon return from interrupt, rcu_irq_exit() is invoked, which calls
   rcu_idle_enter_common(), which in turn calls rcu_sched_qs() again,
   which does another raise_softirq(RCU_SOFTIRQ).

5. The softirq happens shortly and invokes rcu_process_callbacks(),
   which invokes __rcu_process_callbacks().

6. So now callbacks can be invoked. At least they can be if
   ->donetail has been updated. Which it will have been because
   rcu_sched_qs() invokes rcu_qsctr_help().

In the described scenario rcu_sched_qs() and raise_softirq(RCU_SOFTIRQ)
get called twice in steps 3 and 4. This redundancy could be eliminated
by removing rcu_is_cpu_rrupt_from_idle() function.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

cpu.2014.11.03a: Changes for per-CPU variables.
doc.2014.11.13a: Documentation updates.
fixes.2014.11.13a: Miscellaneous fixes.
signal.2014.10.29a: Signal changes.
rt.2014.10.29a: Real-time changes.
torture.2014.11.03a: torture-test changes.

Add early boot self tests for RCU under CONFIG_PROVE_RCU.

Currently the only test is adding a dummy callback which increments a counter
which we then later verify after calling rcu_barrier*().

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>

The "cpu" argument was kept around on the off-chance that RCU might
offload scheduler-clock interrupts.  However, this offload approach
has been replaced by NO_HZ_FULL, which offloads -all- RCU processing
from qualifying CPUs.  It is therefore time to remove the "cpu" argument
to rcu_check_callbacks(), which this commit does.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>