The `s2idle_lock' is acquired during suspend while interrupts are
disabled even on RT. The lock is acquired for short sections only.
Make it a RAW lock which avoids "sleeping while atomic" warnings on RT.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

s2idle_wait_head is used during s2idle with interrupts disabled even on
RT. There is no "custom" wake up function so swait could be used instead
which is also lower weight compared to the wait_queue.
Make s2idle_wait_head a swait_queue_head.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

timekeeping suspend/resume calls read_persistent_clock() which takes
rtc_lock. That results in might sleep warnings because at that point
we run with interrupts disabled.

We cannot convert rtc_lock to a raw spinlock as that would trigger
other might sleep warnings.

As a workaround we disable the might sleep warnings by setting
system_state to SYSTEM_SUSPEND before calling sysdev_suspend() and
restoring it to SYSTEM_RUNNING afer sysdev_resume(). There is no lock
contention because hibernate / suspend to RAM is single-CPU at this
point.

In s2idle's case the system_state is set to SYSTEM_SUSPEND before
timekeeping_suspend() which is invoked by the last CPU. In the resume
case it set back to SYSTEM_RUNNING after timekeeping_resume() which is
invoked by the first CPU in the resume case. The other CPUs will block
on tick_freeze_lock.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bigeasy: cover s2idle in tick_freeze() / tick_unfreeze()]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Using this helper allows us to avoid the in-kernel calls to the
sys_sync() syscall. The ksys_ prefix denotes that this function
is meant as a drop-in replacement for the syscall. In particular, it
uses the same calling convention as sys_sync().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

Problem: This flag does not get cleared currently in the suspend or
resume path in the following cases:

 * In case some driver's suspend routine returns an error.
 * Successful s2idle case
 * etc?

Why is this a problem: What happens is that the next suspend attempt
could fail even though the user did not enable the flag by writing to
/sys/power/wakeup_count. This is 1 use case how the issue can be seen
(but similar use case with driver suspend failure can be thought of):

 1. Read /sys/power/wakeup_count
 2. echo count > /sys/power/wakeup_count
 3. echo freeze > /sys/power/wakeup_count
 4. Let the system suspend, and wakeup the system using some wake source
    that calls pm_wakeup_event() e.g. power button or something.
 5. Note that the combined wakeup count would be incremented due
    to the pm_wakeup_event() in the resume path.
 6. After resuming the events_check_enabled flag is still set.

At this point if the user attempts to freeze again (without writing to
/sys/power/wakeup_count), the suspend would fail even though there has
been no wake event since the past resume.

Address that by clearing the flag just before a resume is completed,
so that it is always cleared for the corner cases mentioned above.

Signed-off-by: Rajat Jain <rajatja@google.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The role of the ->wake() platform callback for suspend-to-idle is to
deal with possible spurious wakeups, among other things.  The ACPI
implementation of it, acpi_s2idle_wake(), additionally checks the
conditions for entering the Low Power S0 Idle state by the platform
and reports the ones that have not been met.

However, the ->wake() platform callback is invoked after calling
dpm_noirq_resume_devices(), which means that the power states of some
devices may have changed since s2idle_enter() returned, so some unmet
Low Power S0 Idle conditions may be reported incorrectly as a result
of that.

To avoid these false positives, reorder the invocations of the
dpm_noirq_resume_devices() routine and the ->wake() platform callback
in s2idle_loop().

Fixes: 726fb6b4f2a8 (ACPI / PM: Check low power idle constraints for debug only)
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Rename struct platform_freeze_ops to platform_s2idle_ops to make it
clear that the callbacks in it are used during suspend-to-idle
suspend/resume transitions and rename the related functions,
variables and so on accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Rename the freeze_state enum representing the suspend-to-idle state
machine states to s2idle_states and rename the related variables and
functions accordingly.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

To make it clear that the symbol in question refers to
suspend-to-idle, rename it from PM_SUSPEND_FREEZE to
PM_SUSPEND_TO_IDLE.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Modify the ACPI system sleep support setup code to select
suspend-to-idle as the default system sleep state if
(1) the ACPI_FADT_LOW_POWER_S0 flag is set in the FADT and
(2) the Low Power Idle S0 _DSM interface has been discovered and
(3) the default sleep state was not selected from the kernel command
line.

The main motivation for this change is that systems where the (1) and
(2) conditions are met typically ship with OSes that don't exercise
the S3 path in the platform firmware which remains untested and turns
out to be non-functional at least in some cases.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>