linux-stable.git/kernel/module.c, branch v5.10.6

module: delay kobject uevent until after module init call

2021-01-06T13:56:54+00:00

[ Upstream commit 38dc717e97153e46375ee21797aa54777e5498f3 ]

Apparently there has been a longstanding race between udev/systemd and
the module loader. Currently, the module loader sends a uevent right
after sysfs initialization, but before the module calls its init
function. However, some udev rules expect that the module has
initialized already upon receiving the uevent.

This race has been triggered recently (see link in references) in some
systemd mount unit files. For instance, the configfs module creates the
/sys/kernel/config mount point in its init function, however the module
loader issues the uevent before this happens. sys-kernel-config.mount
expects to be able to mount /sys/kernel/config upon receipt of the
module loading uevent, but if the configfs module has not called its
init function yet, then this directory will not exist and the mount unit
fails. A similar situation exists for sys-fs-fuse-connections.mount, as
the fuse sysfs mount point is created during the fuse module's init
function. If udev is faster than module initialization then the mount
unit would fail in a similar fashion.

To fix this race, delay the module KOBJ_ADD uevent until after the
module has finished calling its init routine.

References: https://github.com/systemd/systemd/issues/17586
Reviewed-by: Greg Kroah-Hartman 
Tested-By: Nicolas Morey-Chaisemartin 
Signed-off-by: Jessica Yu 
Signed-off-by: Sasha Levin

module: set MODULE_STATE_GOING state when a module fails to load

2021-01-06T13:56:53+00:00

[ Upstream commit 5e8ed280dab9eeabc1ba0b2db5dbe9fe6debb6b5 ]

If a module fails to load due to an error in prepare_coming_module(),
the following error handling in load_module() runs with
MODULE_STATE_COMING in module's state. Fix it by correctly setting
MODULE_STATE_GOING under "bug_cleanup" label.

Signed-off-by: Miroslav Benes 
Signed-off-by: Jessica Yu 
Signed-off-by: Sasha Levin

Merge tag 'modules-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux

2020-10-22T20:08:57+00:00

Pull modules updates from Jessica Yu:
 "Code cleanups: more informative error messages and statically
  initialize init_free_wq to avoid a workqueue warning"

* tag 'modules-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module: statically initialize init section freeing data
  module: Add more error message for failed kernel module loading

Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2020-10-15T17:01:51+00:00

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char, misc, and other assorted driver subsystem
  patches for 5.10-rc1.

  There's a lot of different things in here, all over the drivers/
  directory. Some summaries:

   - soundwire driver updates

   - habanalabs driver updates

   - extcon driver updates

   - nitro_enclaves new driver

   - fsl-mc driver and core updates

   - mhi core and bus updates

   - nvmem driver updates

   - eeprom driver updates

   - binder driver updates and fixes

   - vbox minor bugfixes

   - fsi driver updates

   - w1 driver updates

   - coresight driver updates

   - interconnect driver updates

   - misc driver updates

   - other minor driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits)
  binder: fix UAF when releasing todo list
  docs: w1: w1_therm: Fix broken xref, mistakes, clarify text
  misc: Kconfig: fix a HISI_HIKEY_USB dependency
  LSM: Fix type of id parameter in kernel_post_load_data prototype
  misc: Kconfig: add a new dependency for HISI_HIKEY_USB
  firmware_loader: fix a kernel-doc markup
  w1: w1_therm: make w1_poll_completion static
  binder: simplify the return expression of binder_mmap
  test_firmware: Test partial read support
  firmware: Add request_partial_firmware_into_buf()
  firmware: Store opt_flags in fw_priv
  fs/kernel_file_read: Add "offset" arg for partial reads
  IMA: Add support for file reads without contents
  LSM: Add "contents" flag to kernel_read_file hook
  module: Call security_kernel_post_load_data()
  firmware_loader: Use security_post_load_data()
  LSM: Introduce kernel_post_load_data() hook
  fs/kernel_read_file: Add file_size output argument
  fs/kernel_read_file: Switch buffer size arg to size_t
  fs/kernel_read_file: Remove redundant size argument
  ...

module: statically initialize init section freeing data

2020-10-12T16:27:00+00:00

Corentin hit the following workqueue warning when running with
CRYPTO_MANAGER_EXTRA_TESTS:

  WARNING: CPU: 2 PID: 147 at kernel/workqueue.c:1473 __queue_work+0x3b8/0x3d0
  Modules linked in: ghash_generic
  CPU: 2 PID: 147 Comm: modprobe Not tainted
      5.6.0-rc1-next-20200214-00068-g166c9264f0b1-dirty #545
  Hardware name: Pine H64 model A (DT)
  pc : __queue_work+0x3b8/0x3d0
  Call trace:
   __queue_work+0x3b8/0x3d0
   queue_work_on+0x6c/0x90
   do_init_module+0x188/0x1f0
   load_module+0x1d00/0x22b0

I wasn't able to reproduce on x86 or rpi 3b+.

This is

  WARN_ON(!list_empty(&work->entry))

from __queue_work(), and it happens because the init_free_wq work item
isn't initialized in time for a crypto test that requests the gcm
module.  Some crypto tests were recently moved earlier in boot as
explained in commit c4741b230597 ("crypto: run initcalls for generic
implementations earlier"), which went into mainline less than two weeks
before the Fixes commit.

Avoid the warning by statically initializing init_free_wq and the
corresponding llist.

Link: https://lore.kernel.org/lkml/20200217204803.GA13479@Red/
Fixes: 1a7b7d922081 ("modules: Use vmalloc special flag")
Reported-by: Corentin Labbe 
Tested-by: Corentin Labbe 
Tested-on: sun50i-h6-pine-h64
Tested-on: imx8mn-ddr4-evk
Tested-on: sun50i-a64-bananapi-m64
Reviewed-by: Eric Biggers 
Signed-off-by: Daniel Jordan 
Signed-off-by: Jessica Yu

fs/kernel_file_read: Add "offset" arg for partial reads

2020-10-05T11:37:04+00:00

To perform partial reads, callers of kernel_read_file*() must have a
non-NULL file_size argument and a preallocated buffer. The new "offset"
argument can then be used to seek to specific locations in the file to
fill the buffer to, at most, "buf_size" per call.

Where possible, the LSM hooks can report whether a full file has been
read or not so that the contents can be reasoned about.

Signed-off-by: Kees Cook 
Link: https://lore.kernel.org/r/20201002173828.2099543-14-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman

module: Call security_kernel_post_load_data()

2020-10-05T11:37:03+00:00

Now that there is an API for checking loaded contents for modules
loaded without a file, call into the LSM hooks.

Signed-off-by: Kees Cook 
Reviewed-by: KP Singh 
Acked-by: Jessica Yu 
Link: https://lore.kernel.org/r/20201002173828.2099543-11-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman

LSM: Introduce kernel_post_load_data() hook

2020-10-05T11:37:03+00:00

There are a few places in the kernel where LSMs would like to have
visibility into the contents of a kernel buffer that has been loaded or
read. While security_kernel_post_read_file() (which includes the
buffer) exists as a pairing for security_kernel_read_file(), no such
hook exists to pair with security_kernel_load_data().

Earlier proposals for just using security_kernel_post_read_file() with a
NULL file argument were rejected (i.e. "file" should always be valid for
the security_..._file hooks, but it appears at least one case was
left in the kernel during earlier refactoring. (This will be fixed in
a subsequent patch.)

Since not all cases of security_kernel_load_data() can have a single
contiguous buffer made available to the LSM hook (e.g. kexec image
segments are separately loaded), there needs to be a way for the LSM to
reason about its expectations of the hook coverage. In order to handle
this, add a "contents" argument to the "kernel_load_data" hook that
indicates if the newly added "kernel_post_load_data" hook will be called
with the full contents once loaded. That way, LSMs requiring full contents
can choose to unilaterally reject "kernel_load_data" with contents=false
(which is effectively the existing hook coverage), but when contents=true
they can allow it and later evaluate the "kernel_post_load_data" hook
once the buffer is loaded.

With this change, LSMs can gain coverage over non-file-backed data loads
(e.g. init_module(2) and firmware userspace helper), which will happen
in subsequent patches.

Additionally prepare IMA to start processing these cases.

Signed-off-by: Kees Cook 
Reviewed-by: KP Singh 
Link: https://lore.kernel.org/r/20201002173828.2099543-9-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman

fs/kernel_read_file: Add file_size output argument

2020-10-05T11:37:03+00:00

In preparation for adding partial read support, add an optional output
argument to kernel_read_file*() that reports the file size so callers
can reason more easily about their reading progress.

Signed-off-by: Kees Cook 
Reviewed-by: Mimi Zohar 
Reviewed-by: Luis Chamberlain 
Reviewed-by: James Morris 
Acked-by: Scott Branden 
Link: https://lore.kernel.org/r/20201002173828.2099543-8-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman

fs/kernel_read_file: Remove redundant size argument

2020-10-05T11:34:18+00:00

In preparation for refactoring kernel_read_file*(), remove the redundant
"size" argument which is not needed: it can be included in the return
code, with callers adjusted. (VFS reads already cannot be larger than
INT_MAX.)

Signed-off-by: Kees Cook 
Reviewed-by: Mimi Zohar 
Reviewed-by: Luis Chamberlain 
Reviewed-by: James Morris 
Acked-by: Scott Branden 
Link: https://lore.kernel.org/r/20201002173828.2099543-6-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman