linux-stable.git/kernel/memremap.c, branch v4.20.2

mm, devm_memremap_pages: add MEMORY_DEVICE_PRIVATE support

2019-01-13T08:24:03+00:00

commit 69324b8f48339de2f90fdf2f774687fc6c47629a upstream.

In preparation for consolidating all ZONE_DEVICE enabling via
devm_memremap_pages(), teach it how to handle the constraints of
MEMORY_DEVICE_PRIVATE ranges.

[jglisse@redhat.com: call move_pfn_range_to_zone for MEMORY_DEVICE_PRIVATE]
Link: http://lkml.kernel.org/r/154275559036.76910.12434636179931292607.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams 
Reviewed-by: Jérôme Glisse 
Acked-by: Christoph Hellwig 
Reported-by: Logan Gunthorpe 
Reviewed-by: Logan Gunthorpe 
Cc: Balbir Singh 
Cc: Michal Hocko 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm, devm_memremap_pages: fix shutdown handling

2019-01-13T08:24:03+00:00

commit a95c90f1e2c253b280385ecf3d4ebfe476926b28 upstream.

The last step before devm_memremap_pages() returns success is to allocate
a release action, devm_memremap_pages_release(), to tear the entire setup
down.  However, the result from devm_add_action() is not checked.

Checking the error from devm_add_action() is not enough.  The api
currently relies on the fact that the percpu_ref it is using is killed by
the time the devm_memremap_pages_release() is run.  Rather than continue
this awkward situation, offload the responsibility of killing the
percpu_ref to devm_memremap_pages_release() directly.  This allows
devm_memremap_pages() to do the right thing relative to init failures and
shutdown.

Without this change we could fail to register the teardown of
devm_memremap_pages().  The likelihood of hitting this failure is tiny as
small memory allocations almost always succeed.  However, the impact of
the failure is large given any future reconfiguration, or disable/enable,
of an nvdimm namespace will fail forever as subsequent calls to
devm_memremap_pages() will fail to setup the pgmap_radix since there will
be stale entries for the physical address range.

An argument could be made to require that the ->kill() operation be set in
the @pgmap arg rather than passed in separately.  However, it helps code
readability, tracking the lifetime of a given instance, to be able to grep
the kill routine directly at the devm_memremap_pages() call site.

Link: http://lkml.kernel.org/r/154275558526.76910.7535251937849268605.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams 
Fixes: e8d513483300 ("memremap: change devm_memremap_pages interface...")
Reviewed-by: "Jérôme Glisse" 
Reported-by: Logan Gunthorpe 
Reviewed-by: Logan Gunthorpe 
Reviewed-by: Christoph Hellwig 
Cc: Balbir Singh 
Cc: Michal Hocko 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm, devm_memremap_pages: kill mapping "System RAM" support

2019-01-13T08:24:03+00:00

commit 06489cfbd915ff36c8e36df27f1c2dc60f97ca56 upstream.

Given the fact that devm_memremap_pages() requires a percpu_ref that is
torn down by devm_memremap_pages_release() the current support for mapping
RAM is broken.

Support for remapping "System RAM" has been broken since the beginning and
there is no existing user of this this code path, so just kill the support
and make it an explicit error.

This cleanup also simplifies a follow-on patch to fix the error path when
setting a devm release action for devm_memremap_pages_release() fails.

Link: http://lkml.kernel.org/r/154275557997.76910.14689813630968180480.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams 
Reviewed-by: "Jérôme Glisse" 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Logan Gunthorpe 
Cc: Balbir Singh 
Cc: Michal Hocko 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm, devm_memremap_pages: mark devm_memremap_pages() EXPORT_SYMBOL_GPL

2019-01-13T08:24:03+00:00

commit 808153e1187fa77ac7d7dad261ff476888dcf398 upstream.

devm_memremap_pages() is a facility that can create struct page entries
for any arbitrary range and give drivers the ability to subvert core
aspects of page management.

Specifically the facility is tightly integrated with the kernel's memory
hotplug functionality.  It injects an altmap argument deep into the
architecture specific vmemmap implementation to allow allocating from
specific reserved pages, and it has Linux specific assumptions about page
structure reference counting relative to get_user_pages() and
get_user_pages_fast().  It was an oversight and a mistake that this was
not marked EXPORT_SYMBOL_GPL from the outset.

Again, devm_memremap_pagex() exposes and relies upon core kernel internal
assumptions and will continue to evolve along with 'struct page', memory
hotplug, and support for new memory types / topologies.  Only an in-kernel
GPL-only driver is expected to keep up with this ongoing evolution.  This
interface, and functionality derived from this interface, is not suitable
for kernel-external drivers.

Link: http://lkml.kernel.org/r/154275557457.76910.16923571232582744134.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams 
Reviewed-by: Christoph Hellwig 
Acked-by: Michal Hocko 
Cc: "Jérôme Glisse" 
Cc: Balbir Singh 
Cc: Logan Gunthorpe 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'xarray' of git://git.infradead.org/users/willy/linux-dax

2018-10-28T18:35:40+00:00

Pull XArray conversion from Matthew Wilcox:
 "The XArray provides an improved interface to the radix tree data
  structure, providing locking as part of the API, specifying GFP flags
  at allocation time, eliminating preloading, less re-walking the tree,
  more efficient iterations and not exposing RCU-protected pointers to
  its users.

  This patch set

   1. Introduces the XArray implementation

   2. Converts the pagecache to use it

   3. Converts memremap to use it

  The page cache is the most complex and important user of the radix
  tree, so converting it was most important. Converting the memremap
  code removes the only other user of the multiorder code, which allows
  us to remove the radix tree code that supported it.

  I have 40+ followup patches to convert many other users of the radix
  tree over to the XArray, but I'd like to get this part in first. The
  other conversions haven't been in linux-next and aren't suitable for
  applying yet, but you can see them in the xarray-conv branch if you're
  interested"

* 'xarray' of git://git.infradead.org/users/willy/linux-dax: (90 commits)
  radix tree: Remove multiorder support
  radix tree test: Convert multiorder tests to XArray
  radix tree tests: Convert item_delete_rcu to XArray
  radix tree tests: Convert item_kill_tree to XArray
  radix tree tests: Move item_insert_order
  radix tree test suite: Remove multiorder benchmarking
  radix tree test suite: Remove __item_insert
  memremap: Convert to XArray
  xarray: Add range store functionality
  xarray: Move multiorder_check to in-kernel tests
  xarray: Move multiorder_shrink to kernel tests
  xarray: Move multiorder account test in-kernel
  radix tree test suite: Convert iteration test to XArray
  radix tree test suite: Convert tag_tagged_items to XArray
  radix tree: Remove radix_tree_clear_tags
  radix tree: Remove radix_tree_maybe_preload_order
  radix tree: Remove split/join code
  radix tree: Remove radix_tree_update_node_t
  page cache: Finish XArray conversion
  dax: Convert page fault handlers to XArray
  ...

mm: defer ZONE_DEVICE page initialization to the point where we init pgmap

2018-10-26T23:26:34+00:00

The ZONE_DEVICE pages were being initialized in two locations.  One was
with the memory_hotplug lock held and another was outside of that lock.
The problem with this is that it was nearly doubling the memory
initialization time.  Instead of doing this twice, once while holding a
global lock and once without, I am opting to defer the initialization to
the one outside of the lock.  This allows us to avoid serializing the
overhead for memory init and we can instead focus on per-node init times.

One issue I encountered is that devm_memremap_pages and
hmm_devmmem_pages_create were initializing only the pgmap field the same
way.  One wasn't initializing hmm_data, and the other was initializing it
to a poison value.  Since this is something that is exposed to the driver
in the case of hmm I am opting for a third option and just initializing
hmm_data to 0 since this is going to be exposed to unknown third party
drivers.

[alexander.h.duyck@linux.intel.com: fix reference count for pgmap in devm_memremap_pages]
  Link: http://lkml.kernel.org/r/20181008233404.1909.37302.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/20180925202053.3576.66039.stgit@localhost.localdomain
Signed-off-by: Alexander Duyck 
Reviewed-by: Pavel Tatashin 
Tested-by: Dan Williams 
Cc: Dave Hansen 
Cc: Michal Hocko 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

memremap: Convert to XArray

2018-10-21T14:46:47+00:00

Use the new xa_store_range function instead of the radix tree.

Signed-off-by: Matthew Wilcox

Merge tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm

2018-08-26T01:43:59+00:00

Pull libnvdimm memory-failure update from Dave Jiang:
 "As it stands, memory_failure() gets thoroughly confused by dev_pagemap
  backed mappings. The recovery code has specific enabling for several
  possible page states and needs new enabling to handle poison in dax
  mappings.

  In order to support reliable reverse mapping of user space addresses:

   1/ Add new locking in the memory_failure() rmap path to prevent races
      that would typically be handled by the page lock.

   2/ Since dev_pagemap pages are hidden from the page allocator and the
      "compound page" accounting machinery, add a mechanism to determine
      the size of the mapping that encompasses a given poisoned pfn.

   3/ Given pmem errors can be repaired, change the speculatively
      accessed poison protection, mce_unmap_kpfn(), to be reversible and
      otherwise allow ongoing access from the kernel.

  A side effect of this enabling is that MADV_HWPOISON becomes usable
  for dax mappings, however the primary motivation is to allow the
  system to survive userspace consumption of hardware-poison via dax.
  Specifically the current behavior is:

     mce: Uncorrected hardware memory error in user-access at af34214200
     {1}[Hardware Error]: It has been corrected by h/w and requires no further action
     mce: [Hardware Error]: Machine check events logged
     {1}[Hardware Error]: event severity: corrected
     Memory failure: 0xaf34214: reserved kernel page still referenced by 1 users
     [..]
     Memory failure: 0xaf34214: recovery action for reserved kernel page: Failed
     mce: Memory error not recovered
     

  ...and with these changes:

     Injecting memory failure for pfn 0x20cb00 at process virtual address 0x7f763dd00000
     Memory failure: 0x20cb00: Killing dax-pmd:5421 due to hardware memory corruption
     Memory failure: 0x20cb00: recovery action for dax page: Recovered

  Given all the cross dependencies I propose taking this through
  nvdimm.git with acks from Naoya, x86/core, x86/RAS, and of course dax
  folks"

* tag 'libnvdimm-for-4.19_dax-memory-failure' of gitolite.kernel.org:pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm, pmem: Restore page attributes when clearing errors
  x86/memory_failure: Introduce {set, clear}_mce_nospec()
  x86/mm/pat: Prepare {reserve, free}_memtype() for "decoy" addresses
  mm, memory_failure: Teach memory_failure() about dev_pagemap pages
  filesystem-dax: Introduce dax_lock_mapping_entry()
  mm, memory_failure: Collect mapping size in collect_procs()
  mm, madvise_inject_error: Let memory_failure() optionally take a page reference
  mm, dev_pagemap: Do not clear ->mapping on final put
  mm, madvise_inject_error: Disable MADV_SOFT_OFFLINE for ZONE_DEVICE pages
  filesystem-dax: Set page->index
  device-dax: Set page->index
  device-dax: Enable page_mapping()
  device-dax: Convert to vmf_insert_mixed and vm_fault_t

mm: Change return type int to vm_fault_t for fault handlers

2018-08-24T01:48:44+00:00

Use new return type vm_fault_t for fault handler.  For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno.  Once all instances are converted, vm_fault_t will become a
distinct type.

Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t")

The aim is to change the return type of finish_fault() and
handle_mm_fault() to vm_fault_t type.  As part of that clean up return
type of all other recursively called functions have been changed to
vm_fault_t type.

The places from where handle_mm_fault() is getting invoked will be
change to vm_fault_t type but in a separate patch.

vmf_error() is the newly introduce inline function in 4.17-rc6.

[akpm@linux-foundation.org: don't shadow outer local `ret' in __do_huge_pmd_anonymous_page()]
Link: http://lkml.kernel.org/r/20180604171727.GA20279@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder 
Reviewed-by: Matthew Wilcox 
Reviewed-by: Andrew Morton 
Cc: Matthew Wilcox 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN

2018-08-17T23:20:30+00:00

KASAN learns about hotadded memory via the memory hotplug notifier.
devm_memremap_pages() intentionally skips calling memory hotplug
notifiers.  So KASAN doesn't know anything about new memory added by
devm_memremap_pages().  This causes a crash when KASAN tries to access
non-existent shadow memory:

 BUG: unable to handle kernel paging request at ffffed0078000000
 RIP: 0010:check_memory_region+0x82/0x1e0
 Call Trace:
  memcpy+0x1f/0x50
  pmem_do_bvec+0x163/0x720
  pmem_make_request+0x305/0xac0
  generic_make_request+0x54f/0xcf0
  submit_bio+0x9c/0x370
  submit_bh_wbc+0x4c7/0x700
  block_read_full_page+0x5ef/0x870
  do_read_cache_page+0x2b8/0xb30
  read_dev_sector+0xbd/0x3f0
  read_lba.isra.0+0x277/0x670
  efi_partition+0x41a/0x18f0
  check_partition+0x30d/0x5e9
  rescan_partitions+0x18c/0x840
  __blkdev_get+0x859/0x1060
  blkdev_get+0x23f/0x810
  __device_add_disk+0x9c8/0xde0
  pmem_attach_disk+0x9a8/0xf50
  nvdimm_bus_probe+0xf3/0x3c0
  driver_probe_device+0x493/0xbd0
  bus_for_each_drv+0x118/0x1b0
  __device_attach+0x1cd/0x2b0
  bus_probe_device+0x1ac/0x260
  device_add+0x90d/0x1380
  nd_async_device_register+0xe/0x50
  async_run_entry_fn+0xc3/0x5d0
  process_one_work+0xa0a/0x1810
  worker_thread+0x87/0xe80
  kthread+0x2d7/0x390
  ret_from_fork+0x3a/0x50

Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init()
interface to map/unmap kasan_zero_page at requested virtual addresses.
And use it to add/remove the shadow memory for hotplugged/unplugged
device memory.

Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com
Fixes: 41e94a851304 ("add devm_memremap_pages")
Signed-off-by: Andrey Ryabinin 
Reported-by: Dave Chinner 
Reviewed-by: Dan Williams 
Tested-by: Dan Williams 
Cc: Dmitry Vyukov 
Cc: Alexander Potapenko 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds