linux-stable.git/kernel/kprobes.c, branch v5.8.4

kprobes: Fix compiler warning for !CONFIG_KPROBES_ON_FTRACE

2020-08-21T11:15:15+00:00

[ Upstream commit 10de795a5addd1962406796a6e13ba6cc0fc6bee ]

Fix compiler warning(as show below) for !CONFIG_KPROBES_ON_FTRACE.

kernel/kprobes.c: In function 'kill_kprobe':
kernel/kprobes.c:1116:33: warning: statement with no effect
[-Wunused-value]
 1116 | #define disarm_kprobe_ftrace(p) (-ENODEV)
      |                                 ^
kernel/kprobes.c:2154:3: note: in expansion of macro
'disarm_kprobe_ftrace'
 2154 |   disarm_kprobe_ftrace(p);

Link: https://lore.kernel.org/r/20200805142136.0331f7ea@canb.auug.org.au
Link: https://lkml.kernel.org/r/20200805172046.19066-1-songmuchun@bytedance.com

Reported-by: Stephen Rothwell 
Fixes: 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler")
Acked-by: Masami Hiramatsu 
Acked-by: John Fastabend 
Signed-off-by: Muchun Song 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Sasha Levin

kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler

2020-08-21T11:14:59+00:00

commit 0cb2f1372baa60af8456388a574af6133edd7d80 upstream.

We found a case of kernel panic on our server. The stack trace is as
follows(omit some irrelevant information):

  BUG: kernel NULL pointer dereference, address: 0000000000000080
  RIP: 0010:kprobe_ftrace_handler+0x5e/0xe0
  RSP: 0018:ffffb512c6550998 EFLAGS: 00010282
  RAX: 0000000000000000 RBX: ffff8e9d16eea018 RCX: 0000000000000000
  RDX: ffffffffbe1179c0 RSI: ffffffffc0535564 RDI: ffffffffc0534ec0
  RBP: ffffffffc0534ec1 R08: ffff8e9d1bbb0f00 R09: 0000000000000004
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
  R13: ffff8e9d1f797060 R14: 000000000000bacc R15: ffff8e9ce13eca00
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000080 CR3: 00000008453d0005 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   
   ftrace_ops_assist_func+0x56/0xe0
   ftrace_call+0x5/0x34
   tcpa_statistic_send+0x5/0x130 [ttcp_engine]

The tcpa_statistic_send is the function being kprobed. After analysis,
the root cause is that the fourth parameter regs of kprobe_ftrace_handler
is NULL. Why regs is NULL? We use the crash tool to analyze the kdump.

  crash> dis tcpa_statistic_send -r
         : callq 0xffffffffbd8018c0 

The tcpa_statistic_send calls ftrace_caller instead of ftrace_regs_caller.
So it is reasonable that the fourth parameter regs of kprobe_ftrace_handler
is NULL. In theory, we should call the ftrace_regs_caller instead of the
ftrace_caller. After in-depth analysis, we found a reproducible path.

  Writing a simple kernel module which starts a periodic timer. The
  timer's handler is named 'kprobe_test_timer_handler'. The module
  name is kprobe_test.ko.

  1) insmod kprobe_test.ko
  2) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}'
  3) echo 0 > /proc/sys/kernel/ftrace_enabled
  4) rmmod kprobe_test
  5) stop step 2) kprobe
  6) insmod kprobe_test.ko
  7) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}'

We mark the kprobe as GONE but not disarm the kprobe in the step 4).
The step 5) also do not disarm the kprobe when unregister kprobe. So
we do not remove the ip from the filter. In this case, when the module
loads again in the step 6), we will replace the code to ftrace_caller
via the ftrace_module_enable(). When we register kprobe again, we will
not replace ftrace_caller to ftrace_regs_caller because the ftrace is
disabled in the step 3). So the step 7) will trigger kernel panic. Fix
this problem by disarming the kprobe when the module is going away.

Link: https://lkml.kernel.org/r/20200728064536.24405-1-songmuchun@bytedance.com

Cc: stable@vger.kernel.org
Fixes: ae6aa16fdc16 ("kprobes: introduce ftrace based optimization")
Acked-by: Masami Hiramatsu 
Signed-off-by: Muchun Song 
Co-developed-by: Chengming Zhou 
Signed-off-by: Chengming Zhou 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

kprobes: Do not expose probe addresses to non-CAP_SYSLOG

2020-07-08T23:00:22+00:00

The kprobe show() functions were using "current"'s creds instead
of the file opener's creds for kallsyms visibility. Fix to use
seq_file->file->f_cred.

Cc: Masami Hiramatsu 
Cc: stable@vger.kernel.org
Fixes: 81365a947de4 ("kprobes: Show address of kprobes if kallsyms does")
Fixes: ffb9bd68ebdb ("kprobes: Show blacklist addresses as same as kallsyms does")
Signed-off-by: Kees Cook

kallsyms: Refactor kallsyms_show_value() to take cred

2020-07-08T22:59:57+00:00

In order to perform future tests against the cred saved during open(),
switch kallsyms_show_value() to operate on a cred, and have all current
callers pass current_cred(). This makes it very obvious where callers
are checking the wrong credential in their "read" contexts. These will
be fixed in the coming patches.

Additionally switch return value to bool, since it is always used as a
direct permission check, not a 0-on-success, negative-on-error style
function return.

Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook

kretprobe: Prevent triggering kretprobe from within kprobe_flush_task

2020-06-17T01:21:01+00:00

Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave.
My test was also able to trigger lockdep output:

 ============================================
 WARNING: possible recursive locking detected
 5.6.0-rc6+ #6 Not tainted
 --------------------------------------------
 sched-messaging/2767 is trying to acquire lock:
 ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0

 but task is already holding lock:
 ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&(kretprobe_table_locks[i].lock));
   lock(&(kretprobe_table_locks[i].lock));

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 1 lock held by sched-messaging/2767:
  #0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50

 stack backtrace:
 CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6
 Call Trace:
  dump_stack+0x96/0xe0
  __lock_acquire.cold.57+0x173/0x2b7
  ? native_queued_spin_lock_slowpath+0x42b/0x9e0
  ? lockdep_hardirqs_on+0x590/0x590
  ? __lock_acquire+0xf63/0x4030
  lock_acquire+0x15a/0x3d0
  ? kretprobe_hash_lock+0x52/0xa0
  _raw_spin_lock_irqsave+0x36/0x70
  ? kretprobe_hash_lock+0x52/0xa0
  kretprobe_hash_lock+0x52/0xa0
  trampoline_handler+0xf8/0x940
  ? kprobe_fault_handler+0x380/0x380
  ? find_held_lock+0x3a/0x1c0
  kretprobe_trampoline+0x25/0x50
  ? lock_acquired+0x392/0xbc0
  ? _raw_spin_lock_irqsave+0x50/0x70
  ? __get_valid_kprobe+0x1f0/0x1f0
  ? _raw_spin_unlock_irqrestore+0x3b/0x40
  ? finish_task_switch+0x4b9/0x6d0
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70

The code within the kretprobe handler checks for probe reentrancy,
so we won't trigger any _raw_spin_lock_irqsave probe in there.

The problem is in outside kprobe_flush_task, where we call:

  kprobe_flush_task
    kretprobe_table_lock
      raw_spin_lock_irqsave
        _raw_spin_lock_irqsave

where _raw_spin_lock_irqsave triggers the kretprobe and installs
kretprobe_trampoline handler on _raw_spin_lock_irqsave return.

The kretprobe_trampoline handler is then executed with already
locked kretprobe_table_locks, and first thing it does is to
lock kretprobe_table_locks ;-) the whole lockup path like:

  kprobe_flush_task
    kretprobe_table_lock
      raw_spin_lock_irqsave
        _raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed

        ---> kretprobe_table_locks locked

        kretprobe_trampoline
          trampoline_handler
            kretprobe_hash_lock(current, &head, &flags);  <--- deadlock

Adding kprobe_busy_begin/end helpers that mark code with fake
probe installed to prevent triggering of another kprobe within
this code.

Using these helpers in kprobe_flush_task, so the probe recursion
protection check is hit and the probe is never set to prevent
above lockup.

Link: http://lkml.kernel.org/r/158927059835.27680.7011202830041561604.stgit@devnote2

Fixes: ef53d9c5e4da ("kprobes: improve kretprobe scalability with hashed locking")
Cc: Ingo Molnar 
Cc: "Gustavo A . R . Silva" 
Cc: Anders Roxell 
Cc: "Naveen N . Rao" 
Cc: Anil S Keshavamurthy 
Cc: David Miller 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: stable@vger.kernel.org
Reported-by: "Ziqian SUN (Zamir)" 
Acked-by: Masami Hiramatsu 
Signed-off-by: Jiri Olsa 
Signed-off-by: Steven Rostedt (VMware)

kprobes: Remove redundant arch_disarm_kprobe() call

2020-06-17T01:21:01+00:00

Fix to remove redundant arch_disarm_kprobe() call in
force_unoptimize_kprobe(). This arch_disarm_kprobe()
will be invoked if the kprobe is optimized but disabled,
but that means the kprobe (optprobe) is unused (and
unoptimized) state.

In that case, unoptimize_kprobe() puts it in freeing_list
and kprobe_optimizer (do_unoptimize_kprobes()) automatically
disarm it. Thus this arch_disarm_kprobe() is redundant.

Link: http://lkml.kernel.org/r/158927058719.27680.17183632908465341189.stgit@devnote2

Signed-off-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware)

kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex

2020-06-17T01:21:01+00:00

In kprobe_optimizer() kick_kprobe_optimizer() is called
without kprobe_mutex, but this can race with other caller
which is protected by kprobe_mutex.

To fix that, expand kprobe_mutex protected area to protect
kick_kprobe_optimizer() call.

Link: http://lkml.kernel.org/r/158927057586.27680.5036330063955940456.stgit@devnote2

Fixes: cd7ebe2298ff ("kprobes: Use text_poke_smp_batch for optimizing")
Cc: Ingo Molnar 
Cc: "Gustavo A . R . Silva" 
Cc: Anders Roxell 
Cc: "Naveen N . Rao" 
Cc: Anil S Keshavamurthy 
Cc: David Miller 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Ziqian SUN 
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware)

kprobes: Use non RCU traversal APIs on kprobe_tables if possible

2020-06-17T01:21:01+00:00

Current kprobes uses RCU traversal APIs on kprobe_tables
even if it is safe because kprobe_mutex is locked.

Make those traversals to non-RCU APIs where the kprobe_mutex
is locked.

Link: http://lkml.kernel.org/r/158927056452.27680.9710575332163005121.stgit@devnote2

Reviewed-by: Joel Fernandes (Google) 
Signed-off-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware)

kprobes: Suppress the suspicious RCU warning on kprobes

2020-06-17T01:21:01+00:00

Anders reported that the lockdep warns that suspicious
RCU list usage in register_kprobe() (detected by
CONFIG_PROVE_RCU_LIST.) This is because get_kprobe()
access kprobe_table[] by hlist_for_each_entry_rcu()
without rcu_read_lock.

If we call get_kprobe() from the breakpoint handler context,
it is run with preempt disabled, so this is not a problem.
But in other cases, instead of rcu_read_lock(), we locks
kprobe_mutex so that the kprobe_table[] is not updated.
So, current code is safe, but still not good from the view
point of RCU.

Joel suggested that we can silent that warning by passing
lockdep_is_held() to the last argument of
hlist_for_each_entry_rcu().

Add lockdep_is_held(&kprobe_mutex) at the end of the
hlist_for_each_entry_rcu() to suppress the warning.

Link: http://lkml.kernel.org/r/158927055350.27680.10261450713467997503.stgit@devnote2

Reported-by: Anders Roxell 
Suggested-by: Joel Fernandes 
Reviewed-by: Joel Fernandes (Google) 
Signed-off-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware)

kernel/kprobes.c: convert to use DEFINE_SEQ_ATTRIBUTE macro

2020-06-05T02:06:26+00:00

Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code.

Signed-off-by: Kefeng Wang 
Signed-off-by: Andrew Morton 
Cc: Anil S Keshavamurthy 
Cc: "David S. Miller" 
Cc: Masami Hiramatsu 
Cc: Greg KH 
Cc: Ingo Molnar 
Cc: Al Viro 
Link: http://lkml.kernel.org/r/20200509064031.181091-4-wangkefeng.wang@huawei.com
Signed-off-by: Linus Torvalds