commit 62e0468650c30f0298822c580f382b16328119f6 upstream.

free_irq() ensures that no hardware interrupt handler is executing on a
different CPU before actually releasing resources and deactivating the
interrupt completely in a domain hierarchy.

But that does not catch the case where the interrupt is on flight at the
hardware level but not yet serviced by the target CPU. That creates an
interesing race condition:

   CPU 0                  CPU 1               IRQ CHIP

                                              interrupt is raised
                                              sent to CPU1
			  Unable to handle
			  immediately
			  (interrupts off,
			   deep idle delay)
   mask()
   ...
   free()
     shutdown()
     synchronize_irq()
     release_resources()
                          do_IRQ()
                            -> resources are not available

That might be harmless and just trigger a spurious interrupt warning, but
some interrupt chips might get into a wedged state.

Utilize the existing irq_get_irqchip_state() callback for the
synchronization in free_irq().

synchronize_hardirq() is not using this mechanism as it might actually
deadlock unter certain conditions, e.g. when called with interrupts
disabled and the target CPU is the one on which the synchronization is
invoked. synchronize_irq() uses it because that function cannot be called
from non preemtible contexts as it might sleep.

No functional change intended and according to Marc the existing GIC
implementations where the driver supports the callback should be able
to cope with that core change. Famous last words.

Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.279463375@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1d21f2af8571c6a6a44e7c1911780614847b0253 upstream.

The function might sleep, so it cannot be called from interrupt
context. Not even with care.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.189241552@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4001d8e8762f57d418b66e4e668601791900a1dd upstream.

When interrupts are shutdown, they are immediately deactivated in the
irqdomain hierarchy. While this looks obviously correct there is a subtle
issue:

There might be an interrupt in flight when free_irq() is invoking the
shutdown. This is properly handled at the irq descriptor / primary handler
level, but the deactivation might completely disable resources which are
required to acknowledge the interrupt.

Split the shutdown code and deactivate the interrupt after synchronization
in free_irq(). Fixup all other usage sites where this is not an issue to
invoke the combined shutdown_and_deactivate() function instead.

This still might be an issue if the interrupt in flight servicing is
delayed on a remote CPU beyond the invocation of synchronize_irq(), but
that cannot be handled at that level and needs to be handled in the
synchronize_irq() context.

Fixes: f8264e34965a ("irqdomain: Introduce new interfaces to support hierarchy irqdomains")
Reported-by: Robert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.098196390@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull printk updates from Petr Mladek:

 - Allow state reset of printk_once() calls.

 - Prevent crashes when dereferencing invalid pointers in vsprintf().
   Only the first byte is checked for simplicity.

 - Make vsprintf warnings consistent and inlined.

 - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf
   modifiers.

 - Some clean up of vsprintf and test_printf code.

* tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  lib/vsprintf: Make function pointer_string static
  vsprintf: Limit the length of inlined error messages
  vsprintf: Avoid confusion between invalid address and value
  vsprintf: Prevent crash when dereferencing invalid pointers
  vsprintf: Consolidate handling of unknown pointer specifiers
  vsprintf: Factor out %pO handler as kobject_string()
  vsprintf: Factor out %pV handler as va_format()
  vsprintf: Factor out %p[iI] handler as ip_addr_string()
  vsprintf: Do not check address of well-known strings
  vsprintf: Consistent %pK handling for kptr_restrict == 0
  vsprintf: Shuffle restricted_pointer()
  printk: Tie printk_once / printk_deferred_once into .data.once for reset
  treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
  lib/test_printf: Switch to bitmap_zalloc()

%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch the current users
to use the preferred variant.

The changes have been produced by the following command:

	git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \
	while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done

And verifying the result.

Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Cc: linux-pci@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-btrfs@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-mm@kvack.org
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: David Sterba <dsterba@suse.com> (for btrfs)
Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>

When irq_set_affinity_notifier() replaces the notifier, then the
reference count on the old notifier is dropped which causes it to be
freed. But nothing ensures that the old notifier is not longer queued
in the work list. If it is queued this results in a use after free and
possibly in work list corruption.

Ensure that the work is canceled before the reference is dropped.

Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: marc.zyngier@arm.com
Link: https://lkml.kernel.org/r/1553439424-6529-1-git-send-email-psodagud@codeaurora.org

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

With -Wimplicit-fallthrough added to CFLAGS:

 kernel/irq/manage.c: In function ‘irq_do_set_affinity’:
 kernel/irq/manage.c:198:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   cpumask_copy(desc->irq_common_data.affinity, mask);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 kernel/irq/manage.c:199:2: note: here
   case IRQ_SET_MASK_OK_NOCOPY:
   ^~~~

Annotate it.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20190228213714.GA9246@embeddedor

Pull irqchip updates from Marc Zyngier

- Core pseudo-NMI handling code
- Allow the default irq domain to be retrieved
- A new interrupt controller for the Loongson LS1X platform
- Affinity support for the SiFive PLIC
- Better support for the iMX irqsteer driver
- NUMA aware memory allocations for GICv3
- A handful of other fixes (i8259, GICv3, PLIC)

Pick up upstream changes to avoid conflicts for pending patches.

ready_percpu_nmi() was the previous name of prepare_percpu_nmi(). Update
request_percpu_nmi() comment with the correct function name.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Reported-by: Li Wei <liwei391@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>