linux-stable.git/kernel/irq/handle.c, branch v6.2 Linux kernel stable tree irq: remove unused flags argument from __handle_irq_event_percpu() 2022-01-06T23:25:25+00:00 Sebastian Andrzej Siewior bigeasy@linutronix.de 2021-12-07T12:17:34+00:00 5320eb42dec7a7ef3ab7da3c5c0d7f889a5181e5 The __IRQF_TIMER bit from the flags argument was used in add_interrupt_randomness() to distinguish the timer interrupt from other interrupts. This is no longer the case. Remove the flags argument from __handle_irq_event_percpu(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> 
The __IRQF_TIMER bit from the flags argument was used in
add_interrupt_randomness() to distinguish the timer interrupt from other
interrupts. This is no longer the case.

Remove the flags argument from __handle_irq_event_percpu().

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
random: remove unused irq_flags argument from add_interrupt_randomness() 2022-01-06T23:25:25+00:00 Sebastian Andrzej Siewior bigeasy@linutronix.de 2021-12-07T12:17:33+00:00 703f7066f40599c290babdb79dd61319264987e9 Since commit ee3e00e9e7101 ("random: use registers from interrupted code for CPU's w/o a cycle counter") the irq_flags argument is no longer used. Remove unused irq_flags. Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Liu <wei.liu@kernel.org> Cc: linux-hyperv@vger.kernel.org Cc: x86@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> 
Since commit
   ee3e00e9e7101 ("random: use registers from interrupted code for CPU's w/o a cycle counter")

the irq_flags argument is no longer used.

Remove unused irq_flags.

Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: linux-hyperv@vger.kernel.org
Cc: x86@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
irq: add generic_handle_arch_irq() 2021-10-25T09:05:27+00:00 Mark Rutland mark.rutland@arm.com 2021-10-20T10:24:06+00:00 a1b09501971435ef213251891753afb0d7f3d27a Several architectures select GENERIC_IRQ_MULTI_HANDLER and branch to handle_arch_irq() without performing any entry accounting. Add a generic wrapper to handle the common irqentry work when invoking handle_arch_irq(). Where an architecture needs to perform some entry accounting itself, it will need to invoke handle_arch_irq() itself. In subsequent patches it will become the responsibilty of the entry code to set the irq regs when entering an IRQ (rather than deferring this to an irqchip handler), so generic_handle_arch_irq() is made to set the irq regs now. This can be redundant in some cases, but is never harmful as saving/restoring the old regs nests safely. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Guo Ren <guoren@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> 
Several architectures select GENERIC_IRQ_MULTI_HANDLER and branch to
handle_arch_irq() without performing any entry accounting.

Add a generic wrapper to handle the common irqentry work when invoking
handle_arch_irq(). Where an architecture needs to perform some entry
accounting itself, it will need to invoke handle_arch_irq() itself.

In subsequent patches it will become the responsibilty of the entry code
to set the irq regs when entering an IRQ (rather than deferring this to
an irqchip handler), so generic_handle_arch_irq() is made to set the irq
regs now. This can be redundant in some cases, but is never harmful as
saving/restoring the old regs nests safely.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
genirq: Add a IRQF_NO_DEBUG flag 2021-05-17T18:01:35+00:00 Thomas Gleixner tglx@linutronix.de 2021-04-02T06:23:25+00:00 c2b1063e8feb2115537addce10f36c0c82d11d9b The whole call to note_interrupt() can be avoided or return early when interrupts would be marked accordingly. For IPI handlers which always return HANDLED the whole procedure is pretty pointless to begin with. Add a IRQF_NO_DEBUG flag and mark the interrupt accordingly if supplied when the interrupt is requested. When noirqdebug is set on the kernel commandline, then the interrupt is marked unconditionally so that there is only one condition in the hotpath to evaluate. [ clg: Add changelog ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/7a8ad02f-63a8-c1aa-fdd1-39d973593d02@kaod.org 
The whole call to note_interrupt() can be avoided or return early when
interrupts would be marked accordingly. For IPI handlers which always
return HANDLED the whole procedure is pretty pointless to begin with.

Add a IRQF_NO_DEBUG flag and mark the interrupt accordingly if supplied
when the interrupt is requested.

When noirqdebug is set on the kernel commandline, then the interrupt is
marked unconditionally so that there is only one condition in the hotpath
to evaluate.

 [ clg: Add changelog ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/7a8ad02f-63a8-c1aa-fdd1-39d973593d02@kaod.org
treewide: Use fallthrough pseudo-keyword 2020-08-23T22:36:59+00:00 Gustavo A. R. Silva gustavoars@kernel.org 2020-08-23T22:36:59+00:00 df561f6688fef775baa341a0f5d960becd248b11 Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> 
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Merge tag 'x86-entry-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2020-03-31T02:14:28+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-03-31T02:14:28+00:00 d5f744f9a2ac9ca6d5baf72e97ce6dc4c2f19fe4 Pull x86 entry code updates from Thomas Gleixner: - Convert the 32bit syscalls to be pt_regs based which removes the requirement to push all 6 potential arguments onto the stack and consolidates the interface with the 64bit variant - The first small portion of the exception and syscall related entry code consolidation which aims to address the recently discovered issues vs. RCU, int3, NMI and some other exceptions which can interrupt any context. The bulk of the changes is still work in progress and aimed for 5.8. - A few lockdep namespace cleanups which have been applied into this branch to keep the prerequisites for the ongoing work confined. * tag 'x86-entry-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits) x86/entry: Fix build error x86 with !CONFIG_POSIX_TIMERS lockdep: Rename trace_{hard,soft}{irq_context,irqs_enabled}() lockdep: Rename trace_softirqs_{on,off}() lockdep: Rename trace_hardirq_{enter,exit}() x86/entry: Rename ___preempt_schedule x86: Remove unneeded includes x86/entry: Drop asmlinkage from syscalls x86/entry/32: Enable pt_regs based syscalls x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments x86/entry/32: Rename 32-bit specific syscalls x86/entry/32: Clean up syscall_32.tbl x86/entry: Remove ABI prefixes from functions in syscall tables x86/entry/64: Add __SYSCALL_COMMON() x86/entry: Remove syscall qualifier support x86/entry/64: Remove ptregs qualifier from syscall table x86/entry: Move max syscall number calculation to syscallhdr.sh x86/entry/64: Split X32 syscall table into its own file x86/entry/64: Move sys_ni_syscall stub to common.c x86/entry/64: Use syscall wrappers for x32_rt_sigreturn x86/entry: Refactor SYS_NI macros ... 
Pull x86 entry code updates from Thomas Gleixner:

 - Convert the 32bit syscalls to be pt_regs based which removes the
   requirement to push all 6 potential arguments onto the stack and
   consolidates the interface with the 64bit variant

 - The first small portion of the exception and syscall related entry
   code consolidation which aims to address the recently discovered
   issues vs. RCU, int3, NMI and some other exceptions which can
   interrupt any context. The bulk of the changes is still work in
   progress and aimed for 5.8.

 - A few lockdep namespace cleanups which have been applied into this
   branch to keep the prerequisites for the ongoing work confined.

* tag 'x86-entry-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
  x86/entry: Fix build error x86 with !CONFIG_POSIX_TIMERS
  lockdep: Rename trace_{hard,soft}{irq_context,irqs_enabled}()
  lockdep: Rename trace_softirqs_{on,off}()
  lockdep: Rename trace_hardirq_{enter,exit}()
  x86/entry: Rename ___preempt_schedule
  x86: Remove unneeded includes
  x86/entry: Drop asmlinkage from syscalls
  x86/entry/32: Enable pt_regs based syscalls
  x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments
  x86/entry/32: Rename 32-bit specific syscalls
  x86/entry/32: Clean up syscall_32.tbl
  x86/entry: Remove ABI prefixes from functions in syscall tables
  x86/entry/64: Add __SYSCALL_COMMON()
  x86/entry: Remove syscall qualifier support
  x86/entry/64: Remove ptregs qualifier from syscall table
  x86/entry: Move max syscall number calculation to syscallhdr.sh
  x86/entry/64: Split X32 syscall table into its own file
  x86/entry/64: Move sys_ni_syscall stub to common.c
  x86/entry/64: Use syscall wrappers for x32_rt_sigreturn
  x86/entry: Refactor SYS_NI macros
  ...
lockdep: Introduce wait-type checks 2020-03-21T15:00:24+00:00 Peter Zijlstra peterz@infradead.org 2020-03-21T11:26:01+00:00 de8f5e4f2dc1f032b46afda0a78cab5456974f89 Extend lockdep to validate lock wait-type context. The current wait-types are: LD_WAIT_FREE, /* wait free, rcu etc.. */ LD_WAIT_SPIN, /* spin loops, raw_spinlock_t etc.. */ LD_WAIT_CONFIG, /* CONFIG_PREEMPT_LOCK, spinlock_t etc.. */ LD_WAIT_SLEEP, /* sleeping locks, mutex_t etc.. */ Where lockdep validates that the current lock (the one being acquired) fits in the current wait-context (as generated by the held stack). This ensures that there is no attempt to acquire mutexes while holding spinlocks, to acquire spinlocks while holding raw_spinlocks and so on. In other words, its a more fancy might_sleep(). Obviously RCU made the entire ordeal more complex than a simple single value test because RCU can be acquired in (pretty much) any context and while it presents a context to nested locks it is not the same as it got acquired in. Therefore its necessary to split the wait_type into two values, one representing the acquire (outer) and one representing the nested context (inner). For most 'normal' locks these two are the same. [ To make static initialization easier we have the rule that: .outer == INV means .outer == .inner; because INV == 0. ] It further means that its required to find the minimal .inner of the held stack to compare against the outer of the new lock; because while 'normal' RCU presents a CONFIG type to nested locks, if it is taken while already holding a SPIN type it obviously doesn't relax the rules. Below is an example output generated by the trivial test code: raw_spin_lock(&foo); spin_lock(&bar); spin_unlock(&bar); raw_spin_unlock(&foo); [ BUG: Invalid wait context ] ----------------------------- swapper/0/1 is trying to lock: ffffc90000013f20 (&bar){....}-{3:3}, at: kernel_init+0xdb/0x187 other info that might help us debug this: 1 lock held by swapper/0/1: #0: ffffc90000013ee0 (&foo){+.+.}-{2:2}, at: kernel_init+0xd1/0x187 The way to read it is to look at the new -{n,m} part in the lock description; -{3:3} for the attempted lock, and try and match that up to the held locks, which in this case is the one: -{2,2}. This tells that the acquiring lock requires a more relaxed environment than presented by the lock stack. Currently only the normal locks and RCU are converted, the rest of the lockdep users defaults to .inner = INV which is ignored. More conversions can be done when desired. The check for spinlock_t nesting is not enabled by default. It's a separate config option for now as there are known problems which are currently addressed. The config option allows to identify these problems and to verify that the solutions found are indeed solving them. The config switch will be removed and the checks will permanently enabled once the vast majority of issues has been addressed. [ bigeasy: Move LD_WAIT_FREE,… out of CONFIG_LOCKDEP to avoid compile failure with CONFIG_DEBUG_SPINLOCK + !CONFIG_LOCKDEP] [ tglx: Add the config option ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200321113242.427089655@linutronix.de 
Extend lockdep to validate lock wait-type context.

The current wait-types are:

	LD_WAIT_FREE,		/* wait free, rcu etc.. */
	LD_WAIT_SPIN,		/* spin loops, raw_spinlock_t etc.. */
	LD_WAIT_CONFIG,		/* CONFIG_PREEMPT_LOCK, spinlock_t etc.. */
	LD_WAIT_SLEEP,		/* sleeping locks, mutex_t etc.. */

Where lockdep validates that the current lock (the one being acquired)
fits in the current wait-context (as generated by the held stack).

This ensures that there is no attempt to acquire mutexes while holding
spinlocks, to acquire spinlocks while holding raw_spinlocks and so on. In
other words, its a more fancy might_sleep().

Obviously RCU made the entire ordeal more complex than a simple single
value test because RCU can be acquired in (pretty much) any context and
while it presents a context to nested locks it is not the same as it
got acquired in.

Therefore its necessary to split the wait_type into two values, one
representing the acquire (outer) and one representing the nested context
(inner). For most 'normal' locks these two are the same.

[ To make static initialization easier we have the rule that:
  .outer == INV means .outer == .inner; because INV == 0. ]

It further means that its required to find the minimal .inner of the held
stack to compare against the outer of the new lock; because while 'normal'
RCU presents a CONFIG type to nested locks, if it is taken while already
holding a SPIN type it obviously doesn't relax the rules.

Below is an example output generated by the trivial test code:

  raw_spin_lock(&foo);
  spin_lock(&bar);
  spin_unlock(&bar);
  raw_spin_unlock(&foo);

 [ BUG: Invalid wait context ]
 -----------------------------
 swapper/0/1 is trying to lock:
 ffffc90000013f20 (&bar){....}-{3:3}, at: kernel_init+0xdb/0x187
 other info that might help us debug this:
 1 lock held by swapper/0/1:
  #0: ffffc90000013ee0 (&foo){+.+.}-{2:2}, at: kernel_init+0xd1/0x187

The way to read it is to look at the new -{n,m} part in the lock
description; -{3:3} for the attempted lock, and try and match that up to
the held locks, which in this case is the one: -{2,2}.

This tells that the acquiring lock requires a more relaxed environment than
presented by the lock stack.

Currently only the normal locks and RCU are converted, the rest of the
lockdep users defaults to .inner = INV which is ignored. More conversions
can be done when desired.

The check for spinlock_t nesting is not enabled by default. It's a separate
config option for now as there are known problems which are currently
addressed. The config option allows to identify these problems and to
verify that the solutions found are indeed solving them.

The config switch will be removed and the checks will permanently enabled
once the vast majority of issues has been addressed.

[ bigeasy: Move LD_WAIT_FREE,… out of CONFIG_LOCKDEP to avoid compile
	   failure with CONFIG_DEBUG_SPINLOCK + !CONFIG_LOCKDEP]
[ tglx: Add the config option ]

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113242.427089655@linutronix.de
treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively 2019-04-09T12:19:06+00:00 Sakari Ailus sakari.ailus@linux.intel.com 2019-03-25T19:32:28+00:00 d75f773c86a2b8b7278e2c33343b46a4024bc002 %pF and %pf are functionally equivalent to %pS and %ps conversion specifiers. The former are deprecated, therefore switch the current users to use the preferred variant. The changes have been produced by the following command: git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \ while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done And verifying the result. Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: xen-devel@lists.xenproject.org Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvdimm@lists.01.org Cc: linux-pci@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-btrfs@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: linux-mm@kvack.org Cc: ceph-devel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: David Sterba <dsterba@suse.com> (for btrfs) Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Petr Mladek <pmladek@suse.com> 
%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch the current users
to use the preferred variant.

The changes have been produced by the following command:

	git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \
	while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done

And verifying the result.

Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Cc: linux-pci@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-btrfs@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-mm@kvack.org
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: David Sterba <dsterba@suse.com> (for btrfs)
Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
genirq: Correctly annotate implicit fall through 2019-01-15T09:40:53+00:00 Mathieu Malaterre malat@debian.org 2019-01-14T20:36:33+00:00 01cdfa912f1004c463586f52f1dfcbec1274b1f2 There is a plan to build the kernel with -Wimplicit-fallthrough. The fallthrough in __handle_irq_event_percpu() has a fallthrough annotation which is followed by an additional comment and is not recognized by GCC. Separate the 'fall through' and the rest of the comment with a dash so the regular expression used by GCC matches. Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190114203633.18557-1-malat@debian.org 
There is a plan to build the kernel with -Wimplicit-fallthrough. The
fallthrough in __handle_irq_event_percpu() has a fallthrough annotation
which is followed by an additional comment and is not recognized by GCC.

Separate the 'fall through' and the rest of the comment with a dash so the
regular expression used by GCC matches.

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190114203633.18557-1-malat@debian.org
genirq: Add missing SPDX identifiers 2018-03-20T13:23:28+00:00 Thomas Gleixner tglx@linutronix.de 2018-03-14T21:15:19+00:00 52a65ff5603e685e9b19c2e108b3f0826dc7a86b Add SPDX identifiers to files - which contain an explicit license boiler plate or reference - which do not contain a license reference and were not updated in the initial SPDX conversion because the license was deduced by the scanners via EXPORT_SYMBOL_GPL as GPL2.0 only. [ tglx: Moved adding identifiers from the patch which removes the references/boilerplate ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Link: https://lkml.kernel.org/r/20180314212030.668321222@linutronix.de 
Add SPDX identifiers to files

 - which contain an explicit license boiler plate or reference

 - which do not contain a license reference and were not updated in the
   initial SPDX conversion because the license was deduced by the scanners
   via EXPORT_SYMBOL_GPL as GPL2.0 only.

[ tglx: Moved adding identifiers from the patch which removes the
  	references/boilerplate ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.668321222@linutronix.de