linux-stable.git/kernel/dma, branch v5.15.151

dma-mapping: clear dev->dma_mem to NULL after freeing it

2024-01-25T22:52:38+00:00

[ Upstream commit b07bc2347672cc8c7293c64499f1488278c5ca3d ]

Reproduced with below sequence:
dma_declare_coherent_memory()->dma_release_coherent_memory()
->dma_declare_coherent_memory()->"return -EBUSY" error

It will return -EBUSY from the dma_assign_coherent_memory()
in dma_declare_coherent_memory(), the reason is that dev->dma_mem
pointer has not been set to NULL after it's freed.

Fixes: cf65a0f6f6ff ("dma-mapping: move all DMA mapping code to kernel/dma")
Signed-off-by: Joakim Zhang 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

dma-mapping: Add dma_release_coherent_memory to DMA API

2024-01-25T22:52:38+00:00

[ Upstream commit e61c451476e61450f6771ce03bbc01210a09be16 ]

Add dma_release_coherent_memory to DMA API to allow dma
user call it to release dev->dma_mem when the device is
removed.

Signed-off-by: Mark-PK Tsai 
Acked-by: Christoph Hellwig 
Link: https://lore.kernel.org/r/20220422062436.14384-2-mark-pk.tsai@mediatek.com
Signed-off-by: Mathieu Poirier 
Stable-dep-of: b07bc2347672 ("dma-mapping: clear dev->dma_mem to NULL after freeing it")
Signed-off-by: Sasha Levin

dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock

2023-10-06T11:18:14+00:00

[ Upstream commit fb5a4315591dae307a65fc246ca80b5159d296e1 ]

__dma_entry_alloc_check_leak() calls into printk -> serial console
output (qcom geni) and grabs port->lock under free_entries_lock
spin lock, which is a reverse locking dependency chain as qcom_geni
IRQ handler can call into dma-debug code and grab free_entries_lock
under port->lock.

Move __dma_entry_alloc_check_leak() call out of free_entries_lock
scope so that we don't acquire serial console's port->lock under it.

Trimmed-down lockdep splat:

 The existing dependency chain (in reverse order) is:

               -> #2 (free_entries_lock){-.-.}-{2:2}:
        _raw_spin_lock_irqsave+0x60/0x80
        dma_entry_alloc+0x38/0x110
        debug_dma_map_page+0x60/0xf8
        dma_map_page_attrs+0x1e0/0x230
        dma_map_single_attrs.constprop.0+0x6c/0xc8
        geni_se_rx_dma_prep+0x40/0xcc
        qcom_geni_serial_isr+0x310/0x510
        __handle_irq_event_percpu+0x110/0x244
        handle_irq_event_percpu+0x20/0x54
        handle_irq_event+0x50/0x88
        handle_fasteoi_irq+0xa4/0xcc
        handle_irq_desc+0x28/0x40
        generic_handle_domain_irq+0x24/0x30
        gic_handle_irq+0xc4/0x148
        do_interrupt_handler+0xa4/0xb0
        el1_interrupt+0x34/0x64
        el1h_64_irq_handler+0x18/0x24
        el1h_64_irq+0x64/0x68
        arch_local_irq_enable+0x4/0x8
        ____do_softirq+0x18/0x24
        ...

               -> #1 (&port_lock_key){-.-.}-{2:2}:
        _raw_spin_lock_irqsave+0x60/0x80
        qcom_geni_serial_console_write+0x184/0x1dc
        console_flush_all+0x344/0x454
        console_unlock+0x94/0xf0
        vprintk_emit+0x238/0x24c
        vprintk_default+0x3c/0x48
        vprintk+0xb4/0xbc
        _printk+0x68/0x90
        register_console+0x230/0x38c
        uart_add_one_port+0x338/0x494
        qcom_geni_serial_probe+0x390/0x424
        platform_probe+0x70/0xc0
        really_probe+0x148/0x280
        __driver_probe_device+0xfc/0x114
        driver_probe_device+0x44/0x100
        __device_attach_driver+0x64/0xdc
        bus_for_each_drv+0xb0/0xd8
        __device_attach+0xe4/0x140
        device_initial_probe+0x1c/0x28
        bus_probe_device+0x44/0xb0
        device_add+0x538/0x668
        of_device_add+0x44/0x50
        of_platform_device_create_pdata+0x94/0xc8
        of_platform_bus_create+0x270/0x304
        of_platform_populate+0xac/0xc4
        devm_of_platform_populate+0x60/0xac
        geni_se_probe+0x154/0x160
        platform_probe+0x70/0xc0
        ...

               -> #0 (console_owner){-...}-{0:0}:
        __lock_acquire+0xdf8/0x109c
        lock_acquire+0x234/0x284
        console_flush_all+0x330/0x454
        console_unlock+0x94/0xf0
        vprintk_emit+0x238/0x24c
        vprintk_default+0x3c/0x48
        vprintk+0xb4/0xbc
        _printk+0x68/0x90
        dma_entry_alloc+0xb4/0x110
        debug_dma_map_sg+0xdc/0x2f8
        __dma_map_sg_attrs+0xac/0xe4
        dma_map_sgtable+0x30/0x4c
        get_pages+0x1d4/0x1e4 [msm]
        msm_gem_pin_pages_locked+0x38/0xac [msm]
        msm_gem_pin_vma_locked+0x58/0x88 [msm]
        msm_ioctl_gem_submit+0xde4/0x13ac [msm]
        drm_ioctl_kernel+0xe0/0x15c
        drm_ioctl+0x2e8/0x3f4
        vfs_ioctl+0x30/0x50
        ...

 Chain exists of:
   console_owner --> &port_lock_key --> free_entries_lock

  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(free_entries_lock);
                                lock(&port_lock_key);
                                lock(free_entries_lock);
   lock(console_owner);

                *** DEADLOCK ***

 Call trace:
  dump_backtrace+0xb4/0xf0
  show_stack+0x20/0x30
  dump_stack_lvl+0x60/0x84
  dump_stack+0x18/0x24
  print_circular_bug+0x1cc/0x234
  check_noncircular+0x78/0xac
  __lock_acquire+0xdf8/0x109c
  lock_acquire+0x234/0x284
  console_flush_all+0x330/0x454
  console_unlock+0x94/0xf0
  vprintk_emit+0x238/0x24c
  vprintk_default+0x3c/0x48
  vprintk+0xb4/0xbc
  _printk+0x68/0x90
  dma_entry_alloc+0xb4/0x110
  debug_dma_map_sg+0xdc/0x2f8
  __dma_map_sg_attrs+0xac/0xe4
  dma_map_sgtable+0x30/0x4c
  get_pages+0x1d4/0x1e4 [msm]
  msm_gem_pin_pages_locked+0x38/0xac [msm]
  msm_gem_pin_vma_locked+0x58/0x88 [msm]
  msm_ioctl_gem_submit+0xde4/0x13ac [msm]
  drm_ioctl_kernel+0xe0/0x15c
  drm_ioctl+0x2e8/0x3f4
  vfs_ioctl+0x30/0x50
  ...

Reported-by: Rob Clark 
Signed-off-by: Sergey Senozhatsky 
Acked-by: Robin Murphy 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

dma-remap: use kvmalloc_array/kvfree for larger dma memory remap

2023-08-26T12:23:22+00:00

[ Upstream commit 51ff97d54f02b4444dfc42e380ac4c058e12d5dd ]

If dma_direct_alloc() alloc memory in size of 64MB, the inner function
dma_common_contiguous_remap() will allocate 128KB memory by invoking
the function kmalloc_array(). and the kmalloc_array seems to fail to try to
allocate 128KB mem.

Call trace:
[14977.928623] qcrosvm: page allocation failure: order:5, mode:0x40cc0
[14977.928638] dump_backtrace.cfi_jt+0x0/0x8
[14977.928647] dump_stack_lvl+0x80/0xb8
[14977.928652] warn_alloc+0x164/0x200
[14977.928657] __alloc_pages_slowpath+0x9f0/0xb4c
[14977.928660] __alloc_pages+0x21c/0x39c
[14977.928662] kmalloc_order+0x48/0x108
[14977.928666] kmalloc_order_trace+0x34/0x154
[14977.928668] __kmalloc+0x548/0x7e4
[14977.928673] dma_direct_alloc+0x11c/0x4f8
[14977.928678] dma_alloc_attrs+0xf4/0x138
[14977.928680] gh_vm_ioctl_set_fw_name+0x3c4/0x610 [gunyah]
[14977.928698] gh_vm_ioctl+0x90/0x14c [gunyah]
[14977.928705] __arm64_sys_ioctl+0x184/0x210

work around by doing kvmalloc_array instead.

Signed-off-by: Gao Xu 
Reviewed-by: Suren Baghdasaryan 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

swiotlb: max mapping size takes min align mask into account

2022-10-05T08:39:40+00:00

commit 82806744fd7dde603b64c151eeddaa4ee62193fd upstream.

swiotlb_find_slots() skips slots according to io tlb aligned mask
calculated from min aligned mask and original physical address
offset. This affects max mapping size. The mapping size can't
achieve the IO_TLB_SEGSIZE * IO_TLB_SIZE when original offset is
non-zero. This will cause system boot up failure in Hyper-V
Isolation VM where swiotlb force is enabled. Scsi layer use return
value of dma_max_mapping_size() to set max segment size and it
finally calls swiotlb_max_mapping_size(). Hyper-V storage driver
sets min align mask to 4k - 1. Scsi layer may pass 256k length of
request buffer with 0~4k offset and Hyper-V storage driver can't
get swiotlb bounce buffer via DMA API. Swiotlb_find_slots() can't
find 256k length bounce buffer with offset. Make swiotlb_max_mapping
_size() take min align mask into account.

Signed-off-by: Tianyu Lan 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Rishabh Bhatnagar 
Signed-off-by: Greg Kroah-Hartman

swiotlb: avoid potential left shift overflow

2022-09-15T09:30:07+00:00

[ Upstream commit 3f0461613ebcdc8c4073e235053d06d5aa58750f ]

The second operand passed to slot_addr() is declared as int or unsigned int
in all call sites. The left-shift to get the offset of a slot can overflow
if swiotlb size is larger than 4G.

Convert the macro to an inline function and declare the second argument as
phys_addr_t to avoid the potential overflow.

Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single")
Signed-off-by: Chao Gao 
Reviewed-by: Dongli Zhang 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

swiotlb: fail map correctly with failed io_tlb_default_mem

2022-08-17T12:24:07+00:00

[ Upstream commit c51ba246cb172c9e947dc6fb8868a1eaf0b2a913 ]

In the failure case of trying to use a buffer which we'd previously
failed to allocate, the "!mem" condition is no longer sufficient since
io_tlb_default_mem became static and assigned by default. Update the
condition to work as intended per the rest of that conversion.

Fixes: 463e862ac63e ("swiotlb: Convert io_default_tlb_mem to static allocation")
Signed-off-by: Robin Murphy 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

dma-direct: use the correct size for dma_set_encrypted()

2022-06-29T07:03:31+00:00

commit 3be4562584bba603f33863a00c1c32eecf772ee6 upstream.

The third parameter of dma_set_encrypted() is a size in bytes rather than
the number of pages.

Fixes: 4d0564785bb0 ("dma-direct: factor out dma_set_{de,en}crypted helpers")
Signed-off-by: Dexuan Cui 
Reviewed-by: Robin Murphy 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Greg Kroah-Hartman

dma-debug: make things less spammy under memory pressure

2022-06-22T12:21:55+00:00

[ Upstream commit e19f8fa6ce1ca9b8b934ba7d2e8f34c95abc6e60 ]

Limit the error msg to avoid flooding the console.  If you have a lot of
threads hitting this at once, they could have already gotten passed the
dma_debug_disabled() check before they get to the point of allocation
failure, resulting in quite a lot of this error message spamming the
log.  Use pr_err_once() to limit that.

Signed-off-by: Rob Clark 
Signed-off-by: Christoph Hellwig 
Signed-off-by: Sasha Levin

dma-direct: don't over-decrypt memory

2022-06-09T08:23:03+00:00

[ Upstream commit 4a37f3dd9a83186cb88d44808ab35b78375082c9 ]

The original x86 sev_alloc() only called set_memory_decrypted() on
memory returned by alloc_pages_node(), so the page order calculation
fell out of that logic. However, the common dma-direct code has several
potential allocators, not all of which are guaranteed to round up the
underlying allocation to a power-of-two size, so carrying over that
calculation for the encryption/decryption size was a mistake. Fix it by
rounding to a *number* of pages, rather than an order.

Until recently there was an even worse interaction with DMA_DIRECT_REMAP
where we could have ended up decrypting part of the next adjacent
vmalloc area, only averted by no architecture actually supporting both
configs at once. Don't ask how I found that one out...

Fixes: c10f07aa27da ("dma/direct: Handle force decryption for DMA coherent buffers in common code")
Signed-off-by: Robin Murphy 
Signed-off-by: Christoph Hellwig 
Acked-by: David Rientjes 
Signed-off-by: Sasha Levin